[PATCH 10/10] ARM: ux500: Supply the STMPE keypad Device Tree node to the STUIB DT
From: Lee Jones <hidden>
Date: 2012-10-05 15:32:40
Also in:
lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
This patch allows the STMPE keypad driver to be successfully probed and initialised during a Device Tree enabled boot sequence. It contains all of the required properties needed to setup and map each key on the 6x3 keypad located on the ST User Interface Board. Acked-by: Linus Walleij <redacted> Signed-off-by: Lee Jones <redacted> --- arch/arm/boot/dts/stuib.dtsi | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+)
diff --git a/arch/arm/boot/dts/stuib.dtsi b/arch/arm/boot/dts/stuib.dtsi
index b25663c..b492e3e 100644
--- a/arch/arm/boot/dts/stuib.dtsi
+++ b/arch/arm/boot/dts/stuib.dtsi@@ -21,6 +21,33 @@ i2c-client-wake; st,autosleep-timeout = <1024>; + + stmpe_keypad { + compatible = "st,stmpe-keypad"; + + debounce-interval = <64>; + stericsson,scan-count = <8>; + stericsson,no-autorepeat; + + linux,keymap = <0x205006b + 0x4010074 + 0x3050072 + 0x1030004 + 0x502006a + 0x500000a + 0x5008b + 0x706001c + 0x405000b + 0x6070003 + 0x3040067 + 0x303006c + 0x60400e7 + 0x602009e + 0x4020073 + 0x5050002 + 0x4030069 + 0x3020008>; + }; }; };
--
1.7.9.5