[PATCH v2 5/5] ARM: Exynos: Add basic dts file for Samsung Trats board
From: Kukjin Kim <hidden>
Date: 2012-09-19 23:49:42
Also in:
linux-samsung-soc
Tomasz Figa wrote:
Hi Kgene, On Saturday 08 of September 2012 11:47:15 Kukjin Kim wrote:quoted
quoted
quoted
quoted
+ memory { + reg = <0x40000000 0x20000000 + 0x60000000 0x20000000>; + };Why does this have to be split. Why not have a single entry with the size as 0x40000000?The memory node corresponds to struct meminfo and each entry (with two values) makes one struct membank defining a memory bank.Well...quoted
I've been talking with Kyungmin about this. Originally bootloadersusedquoted
quoted
to report 4 banks of 256 MiB, but it turned out that real bank configuration on Trats is 2 banks of 512 MiB.I think, following should ok here. memory { reg = <0x40000000 0x40000000>; };This will not boot with CONFIG_SPARSEMEM, unless maximum section size is increased to 1024MiB.
Well, see other Origen board. As I know, it works well under environment you said but I'm not sure about its boot-loader environment. Anyway, please check one more and let me know. Then, if you still have same problem, let's use double entries for memory temporary. Thanks. Best regards, Kgene. -- Kukjin Kim [off-list ref], Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd.