[PATCH 5/6] staging: drm/imx: Add devicetree binding documentation

From: Philipp Zabel<p.zabel@pengutronix.de>

Signed-off-by: Philipp Zabel<p.zabel@pengutronix.de>
Signed-off-by: Sascha Hauer<s.hauer@pengutronix.de>
---
  .../bindings/staging/imx-drm/fsl-imx-drm.txt       |   41 ++++++++++++++++++++
  1 file changed, 41 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt

diff --git a/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt b/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt
new file mode 100644
index 0000000..07654f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt

@@ -0,0 +1,41 @@
+Freescale i.MX IPUv3
+====================
+
+Required properties:
+- compatible: Should be "fsl,<chip>-ipu"
+- reg: should be register base and length as documented in the
+  datasheet
+- interrupts: Should contain sync interrupt and error interrupt,
+  in this order.
+- #crtc-cells: 1, See below
+
+example:
+
+ipu: ipu at 18000000 {
+	#crtc-cells =<1>;
+	compatible = "fsl,imx53-ipu";
+	reg =<0x18000000 0x080000000>;
+	interrupts =<11 10>;
+};
+
+Parallel display support
+========================
+
+Required properties:
+- compatible: Should be "fsl,imx-parallel-display"
+- crtc: the crtc this display is connected to, see below
+Optional properties:
+- interface_pix_fmt: How this display is connected to the
+  crtc. Currently supported types: "rgb24", "rgb565"
+- edid: verbatim EDID data block describing attached display.
+- ddc: phandle describing the i2c bus handling the display data
+  channel
+
+example:
+
+display at di0 {
+	compatible = "fsl,imx-parallel-display";
+	edid = [edid-data];
+	crtc =<&ipu 0>;
+	interface-pix-fmt = "rgb24";
+};