[PATCH 07/12] ARM: move all dtb targets out of Makefile.boot

On 09/10/2012 10:49 PM, Jean-Christophe PLAGNIOL-VILLARD wrote:

On 12:51 Mon 10 Sep     , Rob Herring wrote:

quoted

On 09/10/2012 10:52 AM, Jean-Christophe PLAGNIOL-VILLARD wrote:

quoted

On 15:12 Thu 06 Sep     , Rob Herring wrote:

quoted

From: Rob Herring <redacted>

In preparation to support multi-platform kernels, move all the dtb targets
out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile
which is closer to the sources.

Signed-off-by: Rob Herring <redacted>
Cc: Russell King <redacted>
Cc: Andrew Victor <redacted>
Cc: Nicolas Ferre <redacted>
Cc: Jean-Christophe Plagniol-Villard <redacted>
Cc: Kukjin Kim <redacted>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Jason Cooper <redacted>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <redacted>
Cc: Shawn Guo <redacted>
Cc: Viresh Kumar <redacted>
Cc: Shiraz Hashim <redacted>
Cc: Rajeev Kumar <redacted>
Cc: Stephen Warren <redacted>
Cc: Srinidhi Kasagar <redacted>
Cc: Linus Walleij <redacted>
---
 arch/arm/boot/Makefile                |    2 ++
 arch/arm/boot/dts/Makefile            |   41 +++++++++++++++++++++++++++++++++
 arch/arm/mach-at91/Makefile.boot      |   24 -------------------
 arch/arm/mach-exynos/Makefile.boot    |    3 ---
 arch/arm/mach-imx/Makefile.boot       |    7 ------
 arch/arm/mach-kirkwood/Makefile.boot  |   11 ---------
 arch/arm/mach-lpc32xx/Makefile.boot   |    2 --
 arch/arm/mach-mvebu/Makefile.boot     |    2 --
 arch/arm/mach-mxs/Makefile.boot       |    9 --------
 arch/arm/mach-spear13xx/Makefile.boot |    3 ---
 arch/arm/mach-spear3xx/Makefile.boot  |    4 ----
 arch/arm/mach-spear6xx/Makefile.boot  |    2 --
 arch/arm/mach-tegra/Makefile.boot     |    8 -------
 arch/arm/mach-ux500/Makefile.boot     |    2 --
 arch/arm/mach-vexpress/Makefile.boot  |    5 ----
 15 files changed, 43 insertions(+), 82 deletions(-)
 create mode 100644 arch/arm/boot/dts/Makefile

diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index c877087..3fdab01 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile

@@ -15,6 +15,8 @@ ifneq ($(MACHINE),)
 include $(srctree)/$(MACHINE)/Makefile.boot
 endif
 
+include $(srctree)/arch/arm/boot/dts/Makefile
+
 # Note: the following conditions must always be true:
 #   ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET)
 #   PARAMS_PHYS must be within 4MB of ZRELADDR

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
new file mode 100644
index 0000000..e59586b
--- /dev/null
+++ b/arch/arm/boot/dts/Makefile

@@ -0,0 +1,41 @@
+dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb

sorry I see no need of the dtb-y

just do all the time

That's not how it works today. dtb's only for all enabled platforms are
built. Changing the behavior should be a different patch.

no I see no point to check if the platform is enable or not just build all

This will allow to check them

Why would I want to build 100 .dtbs that I don't care about? If I want
to check them, I can either build all the defconfigs, or simply write a
trivial sh for loop to loop over *.dts in the boot/dts directory.