[RFC PATCH 09/13] mmc: omap_hsmmc: add generic DMA request support to the DT binding
From: Matt Porter <hidden>
Date: 2012-09-20 14:44:25
Also in:
linux-devicetree, linux-mmc, linux-omap, linux-spi, lkml
Subsystem:
multimedia card (mmc), secure digital (sd) and sdio subsystem, open firmware and flattened device tree bindings, the rest · Maintainers:
Ulf Hansson, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
The binding definition is based on the generic DMA request binding. Signed-off-by: Matt Porter <redacted> --- .../devicetree/bindings/mmc/ti-omap-hsmmc.txt | 25 +++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
index be76a23..d1b8932 100644
--- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
+++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt@@ -19,8 +19,28 @@ ti,dual-volt: boolean, supports dual voltage cards "supply-name" examples are "vmmc", "vmmc_aux" etc ti,non-removable: non-removable slot (like eMMC) ti,needs-special-reset: Requires a special softreset sequence +dmas: DMA controller phandle and DMA request value ordered pair +One tx and one rx pair is required. +dma-names: DMA request names. These strings correspond 1:1 with +the ordered pairs in dmas. The RX request must be "rx" and the +TX request must be "tx". + +Examples: + +[hwmod populated DMA resources] + + mmc1: mmc at 0x4809c000 { + compatible = "ti,omap4-hsmmc"; + reg = <0x4809c000 0x400>; + ti,hwmods = "mmc1"; + ti,dual-volt; + bus-width = <4>; + vmmc-supply = <&vmmc>; /* phandle to regulator node */ + ti,non-removable; + }; + +[generic DMA request binding] -Example: mmc1: mmc at 0x4809c000 { compatible = "ti,omap4-hsmmc"; reg = <0x4809c000 0x400>;
@@ -29,4 +49,7 @@ Example: bus-width = <4>; vmmc-supply = <&vmmc>; /* phandle to regulator node */ ti,non-removable; + dmas = <&edma 24 + &edma 25>; + dma-names = "tx", "rx"; };
--
1.7.9.5