[PATCH v3 3/3] spi: spi-davinci: convert to DMA engine API

On Fri, 2012-08-31 at 22:32 +0530, Vinod Koul wrote:

On Fri, 2012-08-31 at 22:01 +0530, Sekhar Nori wrote:

quoted

quoted

quoted

Yes, this was the problem. Since the SPI driver now depends on
CONFIG_TI_EDMA for basic operation may be select CONFIG_TI_EDMA in
Kconfig if SPI is enabled? That should do until the fallback to PIO

is

quoted

quoted

implemented.

Then this should be enabled for SPI. Care to send a patch

By 'this' you mean the Kconfig select? Then there should be no need of
a
new patch for this. It can be part of this patch itself, no? 

Either way is okay for me.

And am in good mood :)

Applied all with this as well

From b5f14330590118e6a0659255476c0f24ab681e05 Mon Sep 17 00:00:00 2001

From: Vinod Koul <redacted>
Date: Sat, 1 Sep 2012 06:29:22 +0530
Subject: [PATCH] spi: davici - make davinci select edma

Reported-by: Sekhar Nori <redacted>
Signed-off-by: Vinod Koul <redacted>
---
 drivers/spi/Kconfig |    1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 5f84b55..b9fb9a1 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig

@@ -134,6 +134,7 @@ config SPI_DAVINCI
 	tristate "Texas Instruments DaVinci/DA8x/OMAP-L/AM1x SoC SPI

controller"
 	depends on ARCH_DAVINCI
 	select SPI_BITBANG
+	select TI_EDMA
 	help
 	  SPI master controller for DaVinci/DA8x/OMAP-L/AM1x SPI modules.
 
-- 
1.7.9.5



-- 
~Vinod Koul
Intel Corp.