[PATCH 6/6] ARM: Exynos: Add basic dts file for Samsung Trats board
From: Thomas Abraham <hidden>
Date: 2012-08-31 04:24:20
Also in:
linux-samsung-soc
On 30 August 2012 13:01, Tomasz Figa [off-list ref] wrote:
quoted hunk ↗ jump to hunk
This commit adds basic device tree for Exynos4210-based Trats board. Currently it provides support for eMMC over sdhci and MAX8997 PMIC. Signed-off-by: Tomasz Figa <redacted> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> --- arch/arm/boot/dts/exynos4210-trats.dts | 287 +++++++++++++++++++++++++++++++++ arch/arm/mach-exynos/Makefile.boot | 2 +- 2 files changed, 288 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/exynos4210-trats.dtsdiff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts new file mode 100644 index 0000000..a9cd2d0 --- /dev/null +++ b/arch/arm/boot/dts/exynos4210-trats.dts@@ -0,0 +1,287 @@ +/* + * Samsung's Exynos4210 based Trats board device tree source + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Device tree source file for Samsung's Trats board which is based on + * Samsung's Exynos4210 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +/include/ "exynos4210.dtsi" + +/ { + model = "Samsung Trats based on Exynos4210"; + compatible = "samsung,trats", "samsung,exynos4210"; + + memory { + reg = <0x40000000 0x20000000 + 0x60000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5"; + }; + + wakeup_eint: interrupt-controller-wakeup-eint { + compatible = "samsung,exynos4210-wakeup-eint"; + reg = <0x11000000 0x1000>; + #interrupt-cells = <2>; + interrupt-controller; + interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, + <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>, + <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, + <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>, + <0 32 0>; + };
The external wakeup node should be in the exynos4.dtsi file since this is common across all Exynos4 SoC's. Besides, the device tree support patches for wakeup-interrupts is not being pursed anymore, since it is now handled in pinctrl driver itself. So it would be better not to include this node.
+
+ vemmc_reg: voltage-regulator at 0 {
+ compatible = "regulator-fixed";
+ regulator-name = "VMEM_VDD_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpk0 2 1 0 0>;
+ };
+
+ sdhci_emmc: sdhci at 12510000 {
+ bus-width = <8>;
+ non-removable;
+ gpios = <&gpk0 0 2 0 3>,
+ <&gpk0 1 2 0 3>,
+ <&gpk0 3 2 2 3>,
+ <&gpk0 4 2 2 3>,
+ <&gpk0 5 2 2 3>,
+ <&gpk0 6 2 2 3>,
+ <&gpk1 3 3 3 3>,
+ <&gpk1 4 3 3 3>,
+ <&gpk1 5 3 3 3>,
+ <&gpk1 6 3 3 3>;
+ vmmc-supply = &vemmc_reg;
+ };
+
+ i2c at 138B0000 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-slave-addr = <0x10>;
+ samsung,i2c-max-bus-freq = <100000>;
+ gpios = <&gpb 6 3 3 0>,
+ <&gpb 7 3 3 0>;
+
+ max8997_pmic at 66 {
+ compatible = "maxim,max8997-pmic";
+ interrupt-parent = <&wakeup_eint>;
+
+ reg = <0x66>;
+ interrupts = <4 0>, <3 0>;
+
+ max8997,pmic-buck1-uses-gpio-dvs;
+ max8997,pmic-buck2-uses-gpio-dvs;
+ max8997,pmic-buck5-uses-gpio-dvs;
+
+ max8997,pmic-ignore-gpiodvs-side-effect;
+ max8997,pmic-buck125-default-dvs-idx = <0>;
+
+ max8997,pmic-buck125-dvs-gpios = <&gpx0 5 1 0 0>,
+ <&gpx0 6 1 0 0>,
+ <&gpl0 0 1 0 0>;
+
+ max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
+ <1250000>, <1200000>,
+ <1150000>, <1100000>,
+ <1000000>, <950000>;
+
+ max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>,
+ <950000>, <900000>,
+ <1100000>, <1000000>,
+ <950000>, <900000>;
+
+ max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>;
+
+ regulators {
+ valive_reg: LDO2 {
+ regulator-name = "VALIVE_1.1V_C210";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ vusb_reg: LDO3 {
+ regulator-name = "VUSB_1.1V_C210";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ vmipi_reg: LDO4 {
+ regulator-name = "VMIPI_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vpda_reg: LDO6 {
+ regulator-name = "VCC_1.8V_PDA";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vcam_reg: LDO7 {
+ regulator-name = "CAM_ISP_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vusbdac_reg: LDO8 {
+ regulator-name = "VUSB/VDAC_3.3V_C210";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vccpda_reg: LDO9 {
+ regulator-name = "VCC_2.8V_PDA";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ vpll_reg: LDO10 {
+ regulator-name = "VPLL_1.1V_C210";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ vcclcd_reg: LDO13 {
+ regulator-name = "VCC_3.3V_LCD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vlcd_reg: LDO15 {
+ regulator-name = "VLCD_2.2V";
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ };
+
+ camsensor_reg: LDO16 {
+ regulator-name = "CAM_SENSOR_IO_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vddq_reg: LDO21 {
+ regulator-name = "VDDQ_M1M2_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ varm_breg: BUCK1 {
+ regulator-name = "VARM_1.2V_C210";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ vint_breg: BUCK2 {
+ regulator-name = "VINT_1.1V_C210";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ camisp_breg: BUCK4 {
+ regulator-name = "CAM_ISP_CORE_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ vmem_breg: BUCK5 {
+ regulator-name = "VMEM_1.2V_C210";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ vccsub_breg: BUCK7 {
+ regulator-name = "VCC_SUB_2.0V";
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-always-on;
+ };
+
+ safe1_sreg: ESAFEOUT1 {
+ regulator-name = "SAFEOUT1";
+ regulator-always-on;
+ };
+
+ safe2_sreg: ESAFEOUT2 {
+ regulator-name = "SAFEOUT2";
+ regulator-boot-on;
+ };
+ };
+ };
+ };
+
+ keypad at 100A0000 {
+ status = "disabled";
+ };
+
+ sdhci at 12520000 {
+ status = "disabled";
+ };
+
+ sdhci at 12530000 {
+ status = "disabled";
+ };
+
+ sdhci at 12540000 {
+ status = "disabled";
+ };
+
+ i2c at 13860000 {
+ status = "disabled";
+ };
+
+ i2c at 13870000 {
+ status = "disabled";
+ };
+
+ i2c at 13880000 {
+ status = "disabled";
+ };
+
+ i2c at 13890000 {
+ status = "disabled";
+ };
+
+ i2c at 138A0000 {
+ status = "disabled";
+ };
+
+ i2c at 138C0000 {
+ status = "disabled";
+ };
+
+ i2c at 138D0000 {
+ status = "disabled";
+ };
+
+ spi_0: spi at 13920000 {
+ status = "disabled";
+ };
+
+ spi_1: spi at 13930000 {
+ status = "disabled";
+ };
+
+ spi_2: spi at 13940000 {
+ status = "disabled";
+ };
+};If we choose to mark the nodes in dtsi files as "disabled" then we can avoid these here.
quoted hunk ↗ jump to hunk
diff --git a/arch/arm/mach-exynos/Makefile.boot b/arch/arm/mach-exynos/Makefile.boot index 31bd181..a79d999 100644 --- a/arch/arm/mach-exynos/Makefile.boot +++ b/arch/arm/mach-exynos/Makefile.boot@@ -1,5 +1,5 @@ zreladdr-y += 0x40008000 params_phys-y := 0x40000100 -dtb-$(CONFIG_MACH_EXYNOS4_DT) += exynos4210-origen.dtb exynos4210-smdkv310.dtb +dtb-$(CONFIG_MACH_EXYNOS4_DT) += exynos4210-origen.dtb exynos4210-smdkv310.dtb exynos4210-trats.dtb dtb-$(CONFIG_MACH_EXYNOS5_DT) += exynos5250-smdk5250.dtb --1.7.12
The rest of the additions looks fine. Reviewed-by: Thomas Abraham <redacted>