MX28 & finding out boot mode

On Thu, Aug 30, 2012 at 08:47:21AM +0000, Chen Peter-B29397 wrote:

quoted

quoted

is there a way to find out how the MX28 was booted? I could read out

the

quoted

bootmode-pins for indication. Still, either by button or by empty NAND,
the CPU could have been booted via USB recovery mode. And going through
the docs and the bootlets code, I can't find a way to determine if USB
recovery was used.

So, can USB recovery mode be detected somehow? Then, this and reading
pins should be sufficent, no?

Add Frank&Peter who may know it.

Thanks.

As far as I know, the romcode decides which mode is used, I haven't read
romcode, so don't know priority of below booting selection.

For me, this is not about priorities, I just want to know which mode was
really used in the end :)

Why do you need to know USB recovery mode at your code? 

Some customers want this to handle the recovery case differently than
the standard case.

Thanks for the help!

   Wolfram

-- 
Pengutronix e.K.                           | Wolfram Sang                |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120830/43724dbe/attachment.sig>