[PATCH v2 1/2] ARM: clk-imx35: Fix SSI clock registration
From: s.hauer@pengutronix.de (Sascha Hauer)
Date: 2012-08-28 07:49:57
On Mon, Aug 20, 2012 at 09:39:22AM -0300, Fabio Estevam wrote:
SSI block has two types of clock: ipg: bus clock, the clock needed for accessing registers. per: peripheral clock, the clock needed for generating the bit rate. Currently SSI driver only supports slave mode and only need to handle the ipg clock, because the peripheral clock comes from the master codec. Only register the ipg clock and do not register the peripheral clock for ssi. Signed-off-by: Fabio Estevam <redacted>
Ok, used this version instead. Sascha
quoted hunk ↗ jump to hunk
--- Changes since v1: - Use ssi2_gate for imx-ssi.1 arch/arm/mach-imx/clk-imx35.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c index c6422fb..f7910df 100644 --- a/arch/arm/mach-imx/clk-imx35.c +++ b/arch/arm/mach-imx/clk-imx35.c@@ -230,10 +230,8 @@ int __init mx35_clocks_init() clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb"); clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1"); clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma"); - clk_register_clkdev(clk[ipg], "ipg", "imx-ssi.0"); - clk_register_clkdev(clk[ssi1_div_post], "per", "imx-ssi.0"); - clk_register_clkdev(clk[ipg], "ipg", "imx-ssi.1"); - clk_register_clkdev(clk[ssi2_div_post], "per", "imx-ssi.1"); + clk_register_clkdev(clk[ssi1_gate], NULL, "imx-ssi.0"); + clk_register_clkdev(clk[ssi2_gate], NULL, "imx-ssi.1"); /* i.mx35 has the i.mx21 type uart */ clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0"); clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.0");-- 1.7.9.5
-- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |