[PATCH v11 3/4] drivers/i2c/busses/i2c-at91.c: add new driver
From: ludovic.desroches <hidden>
Date: 2012-08-27 14:00:14
Also in:
linux-i2c
Le 08/27/2012 03:32 PM, Voss, Nikolaus a ?crit :
Hi Adian, Yanes Martinez Adrian wrote on Monday, August 27, 2012 2:46 PM:quoted
Le 08/27/2012 12:40 PM, Yanes Martinez Adrian a ?crit :quoted
Hi Ludovic,quoted
Tested on at91rm9200, at91sam9261, at91sam9g20 and at91sam9m10 with eeprom, temperature sensor and rtc devices (and wolfson chip for sam9g20).concerning the at91rm9200, what was the amount of bytes youtransmitted?quoted
quoted
I have only checked that I can communicate with i2c devices so the amount is very low (1-4 bytes).IIRC it was from >7 bytes when the issues appeared.quoted
Some months ago I performed some testing[1] with the previous version of the patch and the main conclusion was that the absence of PDC in the AT91RM9200 made this driver unusable in such platform.I didn't get your last post in that thread. In my opinion RM9200 should really be excluded from being configured with this driver, what's your opinion Ludovic?
Yes, the use of the TWI controller may be removed for some chips since there are issues that are dependent on the controller itself. RM9200 is not the only one. For the moment, I don't have the necessary knowledge about the TWI controller to take a decision. I would say it can be done in an other patch in order to have your driver included in the mainline quickly since it doesn't introduce a breakage. Regards Ludovic
Regards, Niko -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo at vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html