Thread (25 messages) 25 messages, 6 authors, 2012-09-10
STALE5034d

[PATCH v3 4/4] arm/dts: Add tps65217 regulator DT data to am335x-bone.dts

From: Koen Kooi <hidden>
Date: 2012-08-24 06:28:34
Also in: linux-omap

Op 24 aug. 2012, om 07:50 heeft "AnilKumar, Chimata" [off-list ref] het volgende geschreven:
Hi Koen,

On Thu, Aug 23, 2012 at 19:43:48, Koen Kooi wrote:
quoted
Op 21 aug. 2012, om 13:17 heeft AnilKumar Ch [off-list ref] het volgende geschreven:
quoted
Add tps65217 regulator device tree data to AM335x-Bone by adding
regulator consumers with tightened constraints and regulator-name.
TPS65217 regulator handle can be obtained by using this regulator
name.

This patch also add I2C node with I2C frequency and tps65217 PMIC
I2C slave address.

Signed-off-by: AnilKumar Ch <redacted>
I tried this and the kernel immediately crashes on my beaglebone. Could you upload the complete git tree and .config you used to test this to somewhere public please?
Use this repo to test on beaglebone
https://github.com/hvaibhav/am335x-linux/commits/am335x-upstream-staging-pinctrl

This wiki talks about how to build and use?
https://github.com/hvaibhav/am335x-linux/wiki/How-To-Use-Upstream-Tree

Note: Enable tps65217 regulator in kernel config.
I used that repo and as a seperate test I rebased that to latest mainline, same thing: as soon as I turn on the TPS in the .config it crashes on boot. Is the pinctrl repo the *exact* repo you used to test the patches on beaglebone?
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help