[PATCH 2/4] ARM: dts: mxs: Add alternative I2C muxing options for imx28
flat view
STALE5161d
From: Shawn Guo <hidden>
Date: 2012-08-23 14:33:48
Also in:
linux-fbdev
On Thu, Aug 23, 2012 at 10:42:29AM +0200, Maxime Ripard wrote:
quoted hunk ↗ jump to hunk
Signed-off-by: Maxime Ripard <redacted> Cc: Brian Lilly <redacted> --- arch/arm/boot/dts/imx28.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+)diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 787efac..f6ffcd9 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi@@ -410,6 +410,17 @@ fsl,pull-up = <1>; }; + i2c0_pins_b: i2c0 at 1 { + reg = <1>; + fsl,pinmux-ids = < + 0x3001 /* MX28_PAD_AUART0_RX__DUART_CTS */ + 0x3011 /* MX28_PAD_AUART0_TX__DUART_RTS */
The comments are wrong. I fixed them as below and applied the patch. 0x3001 /* MX28_PAD_AUART0_RX__I2C0_SCL */ 0x3011 /* MX28_PAD_AUART0_TX__I2C0_SDA */ Regards, Shawn
+ >;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
saif0_pins_a: saif0 at 0 {
reg = <0>;
fsl,pinmux-ids = <
--
1.7.9.5