[PATCH 2/5] ASoC: Davinci: McASP: add device tree support for McASP

On Sat, Aug 18, 2012 at 04:11:32, Mark Brown wrote:

On Tue, Aug 14, 2012 at 06:12:02PM +0530, Hebbar, Gururaja wrote:

quoted

+- op-mode : I2S/DIT ops mode.

This would normally be part of the machine binding since it needs to be
applied to both ends of the link.

But in case of McASP driver, it is used when calling snd_soc_register_dai()
To pick the proper dai depending on the McASP operation mode.

When adding it could you come up with
a generic binding for this in terms of the current ASoC DAI paremeters
please?  That way we'll be able to have other machine drivers be
consistent with this one.

Will look into this once I complete the initial DT porting.

quoted

+- tdm-slots : Slots for TDM operation.

This would normally also be a machine driver thing though it's less
normal to need to configure this on both ends.

This parameter is used by McASP hardware controller for managing slots and
Isn't related to any machine modules.

Regards, 
Gururaja