[PATCH 2/5] ARM: tegra: replace the CPU CAR access code by tegra_cpu_car_ops
From: Joseph Lo <hidden>
Date: 2012-08-14 08:07:21
Also in:
linux-tegra
Subsystem:
arm port, the rest · Maintainers:
Russell King, Linus Torvalds
Replacing the code that directly access to CAR registers with tegra_cpu_car_ops. This ops hides CPU CAR access inside and provides control interface for it. Signed-off-by: Joseph Lo <redacted> --- arch/arm/mach-tegra/platsmp.c | 29 +++++------------------------ 1 files changed, 5 insertions(+), 24 deletions(-)
diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c
index 1a208db..96ed171 100644
--- a/arch/arm/mach-tegra/platsmp.c
+++ b/arch/arm/mach-tegra/platsmp.c@@ -31,6 +31,7 @@ #include "fuse.h" #include "flowctrl.h" #include "reset.h" +#include "tegra_cpu_car.h" extern void tegra_secondary_startup(void);
@@ -38,17 +39,6 @@ static void __iomem *scu_base = IO_ADDRESS(TEGRA_ARM_PERIF_BASE); #define EVP_CPU_RESET_VECTOR \ (IO_ADDRESS(TEGRA_EXCEPTION_VECTORS_BASE) + 0x100) -#define CLK_RST_CONTROLLER_CLK_CPU_CMPLX \ - (IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x4c) -#define CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET \ - (IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x340) -#define CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR \ - (IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x344) -#define CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR \ - (IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x34c) - -#define CPU_CLOCK(cpu) (0x1<<(8+cpu)) -#define CPU_RESET(cpu) (0x1111ul<<(cpu)) void __cpuinit platform_secondary_init(unsigned int cpu) {
@@ -63,13 +53,8 @@ void __cpuinit platform_secondary_init(unsigned int cpu) static int tegra20_power_up_cpu(unsigned int cpu) { - u32 reg; - /* Enable the CPU clock. */ - reg = readl(CLK_RST_CONTROLLER_CLK_CPU_CMPLX); - writel(reg & ~CPU_CLOCK(cpu), CLK_RST_CONTROLLER_CLK_CPU_CMPLX); - barrier(); - reg = readl(CLK_RST_CONTROLLER_CLK_CPU_CMPLX); + tegra_enable_cpu_clock(cpu); /* Clear flow controller CSR. */ flowctrl_write_cpu_csr(cpu, 0);
@@ -79,7 +64,6 @@ static int tegra20_power_up_cpu(unsigned int cpu) static int tegra30_power_up_cpu(unsigned int cpu) { - u32 reg; int ret, pwrgateid; unsigned long timeout;
@@ -103,8 +87,7 @@ static int tegra30_power_up_cpu(unsigned int cpu) } /* CPU partition is powered. Enable the CPU clock. */ - writel(CPU_CLOCK(cpu), CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR); - reg = readl(CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR); + tegra_enable_cpu_clock(cpu); udelay(10); /* Remove I/O clamps. */
@@ -128,8 +111,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) * via the flow controller). This will have no effect on first boot * of the CPU since it should already be in reset. */ - writel(CPU_RESET(cpu), CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET); - dmb(); + tegra_put_cpu_in_reset(cpu); /* * Unhalt the CPU. If the flow controller was used to power-gate the
@@ -155,8 +137,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) goto done; /* Take the CPU out of reset. */ - writel(CPU_RESET(cpu), CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR); - wmb(); + tegra_cpu_out_of_reset(cpu); done: return status; }
--
1.7.0.4