[PATCH V5 0/5] clk: mmp: add clock framework for mmp

Quoting Chao Xie (2012-08-19 19:55:10)

From: Chao Xie <redacted>
 arch/arm/mach-mmp/Kconfig    |    3 +
 drivers/clk/Makefile         |    3 +
 drivers/clk/mmp/Makefile     |    9 +
 drivers/clk/mmp/clk-apbc.c   |  152 ++++++++++++++
 drivers/clk/mmp/clk-apmu.c   |   97 +++++++++
 drivers/clk/mmp/clk-frac.c   |  153 ++++++++++++++
 drivers/clk/mmp/clk-mmp2.c   |  449 ++++++++++++++++++++++++++++++++++++++++++
 drivers/clk/mmp/clk-pxa168.c |  346 ++++++++++++++++++++++++++++++++
 drivers/clk/mmp/clk-pxa910.c |  320 ++++++++++++++++++++++++++++++
 drivers/clk/mmp/clk.h        |   35 ++++

Looks like you are not removing your arch/arm/mach-mmp/clock.c.  Is that
intentional?

When I apply your series against v3.6-rc3 I find that compilation breaks
with mmp2_defconfig due to conflicting definitions for the clk api
(clk_enable, clk_set_rate, etc).  This is not surprising since your
legacy clock code is neither deleted nor removed from compilation
conditionally by checking for CONFIG_COMMON_CLK.

Did I somehow manage to misapply your patches or should your patches
have removed the arch-specific clock framework as well?

Regards,
Mike

 10 files changed, 1567 insertions(+), 0 deletions(-)
 create mode 100644 drivers/clk/mmp/Makefile
 create mode 100644 drivers/clk/mmp/clk-apbc.c
 create mode 100644 drivers/clk/mmp/clk-apmu.c
 create mode 100644 drivers/clk/mmp/clk-frac.c
 create mode 100644 drivers/clk/mmp/clk-mmp2.c
 create mode 100644 drivers/clk/mmp/clk-pxa168.c
 create mode 100644 drivers/clk/mmp/clk-pxa910.c
 create mode 100644 drivers/clk/mmp/clk.h