[PATCH 00/11] pinctrl: mvebu: pinctrl driver

STALE4806d

Revision v1 of 4 in this series.

152 messages, 12 authors, 2013-06-18 · page 1 of 3 · open the first message on its own page

[PATCH 00/11] pinctrl: mvebu: pinctrl driver

From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: 2012-08-11 12:57:11

This patch set adds a core pinctrl driver for Marvell MVEBU SoCs and
SoC specific stubs for Armada 370, Armada XP, Dove, and Kirkwood.
The SoC specific stubs use the pinctrl-mvebu core driver that handles
pinctrl API and register accesses for common pinctrl registers.

As especially Dove has some pinctrl registers that do not match the
common pinctrl register layout the core driver has been extended by
some callbacks to allow uncommon Dove pinctrl registers.

DT binding documentation is added for all supported SoCs but as
Dove and Kirkwood are not yet ready for full DT support, the pinctrl
driver is only activated for Armada 370 and XP.

The driver has been tested on Dove, 88f6281 variant of Kirkwood,
Armada 370, and XP.

Sebastian Hesselbarth (3):
  pinctrl: mvebu: pinctrl driver core
  pinctrl: mvebu: dove pinctrl driver
  pinctrl: mvebu: kirkwood pinctrl driver

Thomas Petazzoni (8):
  pinctrl: mvebu: add pinctrl driver for Armada 370
  pinctrl: mvebu: add pinctrl driver for Armada XP
  ARM: mvebu: add pinctrl device in DT for Armada 370/XP SoCs
  ARM: mvebu: Add pinctrl support to Armada XP SoCs
  ARM: mvebu: Add pinctrl support to Armada 370 SoC
  ARM: mvebu: adjust Armada XP evaluation board DTS
  arm: mvebu: enable PINCTRL usage
  arm: mvebu: add pinctrl support in defconfig

 .../pinctrl/marvell,armada-370-pinctrl.txt         |   95 +++
 .../bindings/pinctrl/marvell,armada-xp-pinctrl.txt |  100 +++
 .../bindings/pinctrl/marvell,dove-pinctrl.txt      |   71 ++
 .../bindings/pinctrl/marvell,kirkwood-pinctrl.txt  |  279 +++++++
 .../bindings/pinctrl/marvell,mvebu-pinctrl.txt     |   46 ++
 arch/arm/Kconfig                                   |    3 +
 arch/arm/boot/dts/armada-370-xp.dtsi               |    7 +
 arch/arm/boot/dts/armada-370.dtsi                  |    4 +
 arch/arm/boot/dts/armada-xp-db.dts                 |    4 +-
 arch/arm/boot/dts/armada-xp-mv78230.dtsi           |   27 +
 arch/arm/boot/dts/armada-xp-mv78260.dtsi           |   27 +
 arch/arm/boot/dts/armada-xp-mv78460.dtsi           |   27 +
 arch/arm/configs/mvebu_defconfig                   |    2 +
 drivers/pinctrl/Kconfig                            |   34 +
 drivers/pinctrl/Makefile                           |    5 +
 drivers/pinctrl/pinctrl-armada-370.c               |  421 +++++++++++
 drivers/pinctrl/pinctrl-armada-xp.c                |  466 ++++++++++++
 drivers/pinctrl/pinctrl-dove.c                     |  622 ++++++++++++++++
 drivers/pinctrl/pinctrl-kirkwood.c                 |  460 ++++++++++++
 drivers/pinctrl/pinctrl-mvebu.c                    |  758 ++++++++++++++++++++
 drivers/pinctrl/pinctrl-mvebu.h                    |  175 +++++
 21 files changed, 3631 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt
 create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt
 create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt
 create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt
 create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt
 create mode 100644 arch/arm/boot/dts/armada-xp-mv78230.dtsi
 create mode 100644 arch/arm/boot/dts/armada-xp-mv78260.dtsi
 create mode 100644 arch/arm/boot/dts/armada-xp-mv78460.dtsi
 create mode 100644 drivers/pinctrl/pinctrl-armada-370.c
 create mode 100644 drivers/pinctrl/pinctrl-armada-xp.c
 create mode 100644 drivers/pinctrl/pinctrl-dove.c
 create mode 100644 drivers/pinctrl/pinctrl-kirkwood.c
 create mode 100644 drivers/pinctrl/pinctrl-mvebu.c
 create mode 100644 drivers/pinctrl/pinctrl-mvebu.h

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Thomas Petazzoni <redacted>
---
Cc: Grant Likely <redacted>
Cc: Rob Herring <redacted>
Cc: Rob Landley <redacted>
Cc: Russell King <redacted>
Cc: Linus Walleij <redacted>
Cc: Lior Amsalem <redacted>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory CLEMENT <redacted>
Cc: Ben Dooks <redacted>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Thomas Petazzoni <redacted>
Cc: devicetree-discuss at lists.ozlabs.org
Cc: linux-doc at vger.kernel.org
Cc: linux-kernel at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
-- 
1.7.10.4

[PATCH 02/11] pinctrl: mvebu: dove pinctrl driver

From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: 2012-08-11 12:57:22

This patch adds a SoC specific pinctrl driver for Marvell Dove SoCs
plus DT binding documentation. This driver will use the mvebu pinctrl
driver core.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Cc: Grant Likely <redacted>
Cc: Rob Herring <redacted>
Cc: Rob Landley <redacted>
Cc: Russell King <redacted>
Cc: Linus Walleij <redacted>
Cc: Lior Amsalem <redacted>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory CLEMENT <redacted>
Cc: Ben Dooks <redacted>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Thomas Petazzoni <redacted>
Cc: devicetree-discuss at lists.ozlabs.org
Cc: linux-doc at vger.kernel.org
Cc: linux-kernel at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
---
 .../bindings/pinctrl/marvell,dove-pinctrl.txt      |   71 +++
 arch/arm/Kconfig                                   |    1 +
 drivers/pinctrl/Kconfig                            |    9 +-
 drivers/pinctrl/Makefile                           |    1 +
 drivers/pinctrl/pinctrl-dove.c                     |  622 ++++++++++++++++++++
 5 files changed, 703 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt
 create mode 100644 drivers/pinctrl/pinctrl-dove.c
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt
new file mode 100644
index 0000000..9e6eea2
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt
@@ -0,0 +1,71 @@
+* Marvell Dove SoC pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "marvell,dove-pinctrl"
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, pmu, uart2(rts), sdio0(cd), lcd0(pwm)
+mpp1          1        gpio, pmu, uart2(cts), sdio0(wp), lcd1(pwm)
+mpp2          2        gpio, pmu, uart2(txd), sdio0(buspwr), sata(prsnt),
+                       uart1(rts)
+mpp3          3        gpio, pmu, uart2(rxd), sdio0(ledctrl), sata(act),
+                       uart1(cts), lcd-spi(cs1)
+mpp4          4        gpio, pmu, uart3(rts), sdio1(cd), spi1(miso)
+mpp5          5        gpio, pmu, uart3(cts), sdio1(wp), spi1(cs)
+mpp6          6        gpio, pmu, uart3(txd), sdio1(buspwr), spi1(mosi)
+mpp7          7        gpio, pmu, uart3(rxd), sdio1(ledctrl), spi1(sck)
+mpp8          8        gpio, pmu, watchdog(rstout)
+mpp9          9        gpio, pmu, pex1(clkreq)
+mpp10         10       gpio, pmu, ssp(sclk)
+mpp11         11       gpio, pmu, sata(prsnt), sata-1(act), sdio0(ledctrl),
+                       sdio1(ledctrl), pex0(clkreq)
+mpp12         12       gpio, pmu, uart2(rts), audio0(extclk), sdio1(cd), sata(act)
+mpp13         13       gpio, pmu, uart2(cts), audio1(extclk), sdio1(wp),
+                       ssp(extclk)
+mpp14         14       gpio, pmu, uart2(txd), sdio1(buspwr), ssp(rxd)
+mpp15         15       gpio, pmu, uart2(rxd), sdio1(ledctrl), ssp(sfrm)
+mpp16         16       gpio, uart3(rts), sdio0(cd), ac97(sdi1), lcd-spi(cs1)
+mpp17         17       gpio, uart3(cts), sdio0(wp), ac97(sdi2), twsi(sda),
+                       ac97-1(sysclko)
+mpp18         18       gpio, uart3(txd), sdio0(buspwr), ac97(sdi3), lcd0(pwm)
+mpp19         19       gpio, uart3(rxd), sdio0(ledctrl), twsi(sck)
+mpp20         20       gpio, sdio0(cd), sdio1(cd), spi1(miso), lcd-spi(miso),
+                       ac97(sysclko)
+mpp21         21       gpio, sdio0(wp), sdio1(wp), spi1(cs), lcd-spi(cs0),
+                       uart1(cts), ssp(sfrm)
+mpp22         22       gpio, sdio0(buspwr), sdio1(buspwr), spi1(mosi),
+                       lcd-spi(mosi), uart1(cts), ssp(txd)
+mpp23         23       gpio, sdio0(ledctrl), sdio1(ledctrl), spi1(sck),
+                       lcd-spi(sck), ssp(sclk)
+mpp_camera    24-39    gpio, camera
+mpp_sdio0     40-45    gpio, sdio0
+mpp_sdio1     46-51    gpio, sdio1
+mpp_audio1    52-57    gpio, i2s1/spdifo, i2s1, spdifo, twsi, ssp/spdifo, ssp,
+                       ssp/twsi
+mpp_spi0      58-61    gpio, spi0
+mpp_uart1     62-63    gpio, uart1
+mpp_nand      64-71    gpo, nand
+audio0        -        i2s, ac97
+twsi          -        none, opt1, opt2, opt3
+
+Notes:
+* group "mpp_audio1" allows the following functions and gpio pins:
+  - gpio          : gpio on pins 52-57
+  - i2s1/spdifo   : audio1 i2s on pins 52-55 and spdifo on 57, no gpios
+  - i2s1          : audio1 i2s on pins 52-55, gpio on pins 56,57
+  - spdifo        : spdifo on pin 57, gpio on pins 52-55
+  - twsi          : twsi on pins 56,57, gpio on pins 52-55
+  - ssp/spdifo    : ssp on pins 52-55, spdifo on pin 57, no gpios
+  - ssp           : ssp on pins 52-55, gpio on pins 56,57
+  - ssp/twsi      : ssp on pins 52-55, twsi on pins 56,57, no gpios
+* group "audio0" internally muxes i2s0 or ac97 controller to the dedicated
+  audio0 pins.
+* group "twsi" internally muxes twsi controller to the dedicated or option pins.
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e91c7cd..cd3d827 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -584,6 +584,7 @@ config ARCH_DOVE
 	select GENERIC_CLOCKEVENTS
 	select NEED_MACH_IO_H
 	select PLAT_ORION
+	select PINCTRL
 	help
 	  Support for the Marvell Dove SoC 88AP510
 
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index b968335..e2427eb 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -147,7 +147,7 @@ config PINCTRL_COH901
 
 config PINCTRL_MVEBU
 	bool "Marvell SoC pin controller drivers"
-	depends on ARCH_MVEBU
+	depends on ARCH_MVEBU || ARCH_DOVE
 	select PINMUX
 	select PINCONF
 	help
@@ -155,6 +155,13 @@ config PINCTRL_MVEBU
 	  This is only the driver core and additionally needs a SoC specific
 	  driver.
 
+config PINCTRL_DOVE
+	bool "Support for Marvell Dove SoCs"
+	depends on PINCTRL_MVEBU
+	help
+	  Say yes here to support pinctrl driver on Marvell Dove SoCs
+	  (88AP510).
+
 source "drivers/pinctrl/spear/Kconfig"
 
 endmenu
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 007ed32..d1327df 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -30,5 +30,6 @@ obj-$(CONFIG_PINCTRL_TEGRA30)	+= pinctrl-tegra30.o
 obj-$(CONFIG_PINCTRL_U300)	+= pinctrl-u300.o
 obj-$(CONFIG_PINCTRL_COH901)	+= pinctrl-coh901.o
 obj-$(CONFIG_PINCTRL_MVEBU)	+= pinctrl-mvebu.o
+obj-$(CONFIG_PINCTRL_DOVE)	+= pinctrl-dove.o
 
 obj-$(CONFIG_PLAT_SPEAR)	+= spear/
diff --git a/drivers/pinctrl/pinctrl-dove.c b/drivers/pinctrl/pinctrl-dove.c
new file mode 100644
index 0000000..b16de42
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-dove.c
@@ -0,0 +1,622 @@
+/*
+ * Marvell Dove pinctrl driver based on mvebu pinctrl core
+ *
+ * Author: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-mvebu.h"
+
+#define DOVE_SB_REGS_VIRT_BASE		0xfde00000
+#define DOVE_MPP_VIRT_BASE		(DOVE_SB_REGS_VIRT_BASE | 0xd0200)
+#define DOVE_PMU_MPP_GENERAL_CTRL	(DOVE_MPP_VIRT_BASE + 0x10)
+#define  DOVE_AU0_AC97_SEL		(1 << 16)
+#define DOVE_GLOBAL_CONFIG_1		(DOVE_SB_REGS_VIRT_BASE | 0xe802C)
+#define  DOVE_TWSI_ENABLE_OPTION1	(1 << 7)
+#define DOVE_GLOBAL_CONFIG_2		(DOVE_SB_REGS_VIRT_BASE | 0xe8030)
+#define  DOVE_TWSI_ENABLE_OPTION2	(1 << 20)
+#define  DOVE_TWSI_ENABLE_OPTION3	(1 << 21)
+#define  DOVE_TWSI_OPTION3_GPIO		(1 << 22)
+#define DOVE_SSP_CTRL_STATUS_1		(DOVE_SB_REGS_VIRT_BASE | 0xe8034)
+#define  DOVE_SSP_ON_AU1		(1 << 0)
+#define DOVE_MPP_GENERAL_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xe803c)
+#define  DOVE_AU1_SPDIFO_GPIO_EN	(1 << 1)
+#define  DOVE_NAND_GPIO_EN		(1 << 0)
+#define DOVE_GPIO_LO_VIRT_BASE		(DOVE_SB_REGS_VIRT_BASE | 0xd0400)
+#define DOVE_MPP_CTRL4_VIRT_BASE	(DOVE_GPIO_LO_VIRT_BASE + 0x40)
+#define  DOVE_SPI_GPIO_SEL		(1 << 5)
+#define  DOVE_UART1_GPIO_SEL		(1 << 4)
+#define  DOVE_AU1_GPIO_SEL		(1 << 3)
+#define  DOVE_CAM_GPIO_SEL		(1 << 2)
+#define  DOVE_SD1_GPIO_SEL		(1 << 1)
+#define  DOVE_SD0_GPIO_SEL		(1 << 0)
+
+static int dove_pmu_mpp_ctrl_get(struct mvebu_mpp_ctrl *ctrl,
+				 unsigned long *config)
+{
+	unsigned off = (ctrl->pid / 8) * 4;
+	unsigned shift = (ctrl->pid % 8) * 4;
+	unsigned long pmu = readl(DOVE_PMU_MPP_GENERAL_CTRL);
+	unsigned long mpp = readl(DOVE_MPP_VIRT_BASE + off);
+
+	if (pmu & (1 << ctrl->pid))
+		*config = 0x10;
+	else
+		*config = (mpp >> shift) & 0xf;
+	return 0;
+}
+
+static int dove_pmu_mpp_ctrl_set(struct mvebu_mpp_ctrl *ctrl,
+				 unsigned long config)
+{
+	unsigned off = (ctrl->pid / 8) * 4;
+	unsigned shift = (ctrl->pid % 8) * 4;
+	unsigned long pmu = readl(DOVE_PMU_MPP_GENERAL_CTRL);
+	unsigned long mpp = readl(DOVE_MPP_VIRT_BASE + off);
+
+	if (config == 0x10)
+		writel(pmu | (1 << ctrl->pid), DOVE_PMU_MPP_GENERAL_CTRL);
+	else {
+		writel(pmu & ~(1 << ctrl->pid), DOVE_PMU_MPP_GENERAL_CTRL);
+		mpp &= ~(0xf << shift);
+		mpp |= config << shift;
+		writel(mpp, DOVE_MPP_VIRT_BASE + off);
+	}
+	return 0;
+}
+
+static int dove_mpp4_ctrl_get(struct mvebu_mpp_ctrl *ctrl,
+			      unsigned long *config)
+{
+	unsigned long mpp4 = readl(DOVE_MPP_CTRL4_VIRT_BASE);
+	unsigned long mask;
+
+	if (ctrl->pid == 24)
+		mask = DOVE_CAM_GPIO_SEL;
+	else if (ctrl->pid == 40)
+		mask = DOVE_SD0_GPIO_SEL;
+	else if (ctrl->pid == 46)
+		mask = DOVE_SD1_GPIO_SEL;
+	else if (ctrl->pid == 58)
+		mask = DOVE_SPI_GPIO_SEL;
+	else if (ctrl->pid == 62)
+		mask = DOVE_UART1_GPIO_SEL;
+	else
+		return -EINVAL;
+
+	*config = ((mpp4 & mask) != 0);
+
+	return 0;
+}
+
+static int dove_mpp4_ctrl_set(struct mvebu_mpp_ctrl *ctrl,
+			      unsigned long config)
+{
+	unsigned long mpp4 = readl(DOVE_MPP_CTRL4_VIRT_BASE);
+	unsigned long mask;
+
+	if (ctrl->pid == 24)
+		mask = DOVE_CAM_GPIO_SEL;
+	else if (ctrl->pid == 40)
+		mask = DOVE_SD0_GPIO_SEL;
+	else if (ctrl->pid == 46)
+		mask = DOVE_SD1_GPIO_SEL;
+	else if (ctrl->pid == 58)
+		mask = DOVE_SPI_GPIO_SEL;
+	else if (ctrl->pid == 62)
+		mask = DOVE_UART1_GPIO_SEL;
+	else
+		return -EINVAL;
+
+	mpp4 &= ~mask;
+	if (config)
+		mpp4 |= mask;
+
+	writel(mpp4, DOVE_MPP_CTRL4_VIRT_BASE);
+
+	return 0;
+}
+
+static int dove_nand_ctrl_get(struct mvebu_mpp_ctrl *ctrl,
+			      unsigned long *config)
+{
+	unsigned long gmpp = readl(DOVE_MPP_GENERAL_VIRT_BASE);
+
+	*config = ((gmpp & DOVE_NAND_GPIO_EN) != 0);
+
+	return 0;
+}
+
+static int dove_nand_ctrl_set(struct mvebu_mpp_ctrl *ctrl,
+			      unsigned long config)
+{
+	unsigned long gmpp = readl(DOVE_MPP_GENERAL_VIRT_BASE);
+
+	gmpp &= ~DOVE_NAND_GPIO_EN;
+	if (config)
+		gmpp |= DOVE_NAND_GPIO_EN;
+
+	writel(gmpp, DOVE_MPP_GENERAL_VIRT_BASE);
+
+	return 0;
+}
+
+static int dove_audio0_ctrl_get(struct mvebu_mpp_ctrl *ctrl,
+				unsigned long *config)
+{
+	unsigned long pmu = readl(DOVE_PMU_MPP_GENERAL_CTRL);
+
+	*config = ((pmu & DOVE_AU0_AC97_SEL) != 0);
+
+	return 0;
+}
+
+static int dove_audio0_ctrl_set(struct mvebu_mpp_ctrl *ctrl,
+				unsigned long config)
+{
+	unsigned long pmu = readl(DOVE_PMU_MPP_GENERAL_CTRL);
+
+	pmu &= ~DOVE_AU0_AC97_SEL;
+	if (config)
+		pmu |= DOVE_AU0_AC97_SEL;
+	writel(pmu, DOVE_PMU_MPP_GENERAL_CTRL);
+
+	return 0;
+}
+
+static int dove_audio1_ctrl_get(struct mvebu_mpp_ctrl *ctrl,
+				unsigned long *config)
+{
+	unsigned long mpp4 = readl(DOVE_MPP_CTRL4_VIRT_BASE);
+	unsigned long sspc1 = readl(DOVE_SSP_CTRL_STATUS_1);
+	unsigned long gmpp = readl(DOVE_MPP_GENERAL_VIRT_BASE);
+	unsigned long gcfg2 = readl(DOVE_GLOBAL_CONFIG_2);
+
+	*config = 0;
+	if (mpp4 & DOVE_AU1_GPIO_SEL)
+		*config |= 0x8;
+	if (sspc1 & DOVE_SSP_ON_AU1)
+		*config |= 0x4;
+	if (gmpp & DOVE_AU1_SPDIFO_GPIO_EN)
+		*config |= 0x2;
+	if (gcfg2 & DOVE_TWSI_OPTION3_GPIO)
+		*config |= 0x1;
+
+	/* SSP/TWSI only if I2S1 not set*/
+	if ((*config & 0x8) == 0)
+		*config &= ~(0x4 | 0x1);
+	/* TWSI only if SPDIFO not set*/
+	if ((*config & 0x2) == 0)
+		*config &= ~(0x1);
+	return 0;
+}
+
+static int dove_audio1_ctrl_set(struct mvebu_mpp_ctrl *ctrl,
+				unsigned long config)
+{
+	unsigned long mpp4 = readl(DOVE_MPP_CTRL4_VIRT_BASE);
+	unsigned long sspc1 = readl(DOVE_SSP_CTRL_STATUS_1);
+	unsigned long gmpp = readl(DOVE_MPP_GENERAL_VIRT_BASE);
+	unsigned long gcfg2 = readl(DOVE_GLOBAL_CONFIG_2);
+
+	if (config & 0x1)
+		gcfg2 |= DOVE_TWSI_OPTION3_GPIO;
+	if (config & 0x2)
+		gmpp |= DOVE_AU1_SPDIFO_GPIO_EN;
+	if (config & 0x4)
+		sspc1 |= DOVE_SSP_ON_AU1;
+	if (config & 0x8)
+		mpp4 |= DOVE_AU1_GPIO_SEL;
+
+	writel(mpp4, DOVE_MPP_CTRL4_VIRT_BASE);
+	writel(sspc1, DOVE_SSP_CTRL_STATUS_1);
+	writel(gmpp, DOVE_MPP_GENERAL_VIRT_BASE);
+	writel(gcfg2, DOVE_GLOBAL_CONFIG_2);
+
+	return 0;
+}
+
+/* mpp[52:57] gpio pins depend heavily on current config;
+ * gpio_req does not try to mux in gpio capabilities to not
+ * break other functions. If you require all mpps as gpio
+ * enforce gpio setting by pinctrl mapping.
+ */
+static int dove_audio1_ctrl_gpio_req(struct mvebu_mpp_ctrl *ctrl, u8 pid)
+{
+	unsigned long config;
+
+	dove_audio1_ctrl_get(ctrl, &config);
+
+	switch (config) {
+	/* mode 0x00 i2s1/spdifo : no gpio */
+	/* mode 0x0c ssp/spdifo  : no gpio */
+	/* mode 0x0f ssp/twsi    : no gpio */
+	case 0x00:
+	case 0x0c:
+	case 0x0f:
+		return -ENOTSUPP;
+
+	/* mode 0x02 i2s1 : gpio[56:57] */
+	/* mode 0x0e ssp  : gpio[56:57] */
+	case 0x02:
+	case 0x0e:
+		if (pid >= 56)
+			return 0;
+
+	/* mode 0x08 spdifo : gpio[52:55] */
+	/* mode 0x0b twsi   : gpio[52:55] */
+	case 0x08:
+	case 0x0b:
+		if (pid <= 55)
+			return 0;
+
+	/* mode 0x0a/gpio : all gpio */
+	case 0x0a:
+		return 0;
+	}
+
+	return -ENOTSUPP;
+}
+
+/* mpp[52:57] has gpio pins capable of in and out */
+static int dove_audio1_ctrl_gpio_dir(struct mvebu_mpp_ctrl *ctrl, u8 pid,
+				bool input)
+{
+	return 0;
+}
+
+static int dove_twsi_ctrl_get(struct mvebu_mpp_ctrl *ctrl,
+			      unsigned long *config)
+{
+	unsigned long gcfg1 = readl(DOVE_GLOBAL_CONFIG_1);
+	unsigned long gcfg2 = readl(DOVE_GLOBAL_CONFIG_2);
+
+	*config = 0;
+	if (gcfg1 & DOVE_TWSI_ENABLE_OPTION1)
+		*config = 0x1;
+	else if (gcfg2 & DOVE_TWSI_ENABLE_OPTION2)
+		*config = 0x2;
+	else if (gcfg2 & DOVE_TWSI_ENABLE_OPTION3)
+		*config = 0x3;
+
+	return 0;
+}
+
+static int dove_twsi_ctrl_set(struct mvebu_mpp_ctrl *ctrl,
+				unsigned long config)
+{
+	unsigned long gcfg1 = readl(DOVE_GLOBAL_CONFIG_1);
+	unsigned long gcfg2 = readl(DOVE_GLOBAL_CONFIG_2);
+
+	gcfg1 &= ~DOVE_TWSI_ENABLE_OPTION1;
+	gcfg2 &= ~(DOVE_TWSI_ENABLE_OPTION2 | DOVE_TWSI_ENABLE_OPTION2);
+
+	switch (config) {
+	case 1:
+		gcfg1 |= DOVE_TWSI_ENABLE_OPTION1;
+		break;
+	case 2:
+		gcfg2 |= DOVE_TWSI_ENABLE_OPTION2;
+		break;
+	case 3:
+		gcfg2 |= DOVE_TWSI_ENABLE_OPTION3;
+		break;
+	}
+
+	writel(gcfg1, DOVE_GLOBAL_CONFIG_1);
+	writel(gcfg2, DOVE_GLOBAL_CONFIG_2);
+
+	return 0;
+}
+
+static struct mvebu_mpp_ctrl dove_mpp_controls[] = {
+	MPP_FUNC_CTRL(0, 0, "mpp0", dove_pmu_mpp_ctrl),
+	MPP_FUNC_CTRL(1, 1, "mpp1", dove_pmu_mpp_ctrl),
+	MPP_FUNC_CTRL(2, 2, "mpp2", dove_pmu_mpp_ctrl),
+	MPP_FUNC_CTRL(3, 3, "mpp3", dove_pmu_mpp_ctrl),
+	MPP_FUNC_CTRL(4, 4, "mpp4", dove_pmu_mpp_ctrl),
+	MPP_FUNC_CTRL(5, 5, "mpp5", dove_pmu_mpp_ctrl),
+	MPP_FUNC_CTRL(6, 6, "mpp6", dove_pmu_mpp_ctrl),
+	MPP_FUNC_CTRL(7, 7, "mpp7", dove_pmu_mpp_ctrl),
+	MPP_FUNC_CTRL(8, 8, "mpp8", dove_pmu_mpp_ctrl),
+	MPP_FUNC_CTRL(9, 9, "mpp9", dove_pmu_mpp_ctrl),
+	MPP_FUNC_CTRL(10, 10, "mpp10", dove_pmu_mpp_ctrl),
+	MPP_FUNC_CTRL(11, 11, "mpp11", dove_pmu_mpp_ctrl),
+	MPP_FUNC_CTRL(12, 12, "mpp12", dove_pmu_mpp_ctrl),
+	MPP_FUNC_CTRL(13, 13, "mpp13", dove_pmu_mpp_ctrl),
+	MPP_FUNC_CTRL(14, 14, "mpp14", dove_pmu_mpp_ctrl),
+	MPP_FUNC_CTRL(15, 15, "mpp15", dove_pmu_mpp_ctrl),
+	MPP_REG_CTRL(16, 23),
+	MPP_FUNC_CTRL(24, 39, "mpp_camera", dove_mpp4_ctrl),
+	MPP_FUNC_CTRL(40, 45, "mpp_sdio0", dove_mpp4_ctrl),
+	MPP_FUNC_CTRL(46, 51, "mpp_sdio1", dove_mpp4_ctrl),
+	MPP_FUNC_GPIO_CTRL(52, 57, "mpp_audio1", dove_audio1_ctrl),
+	MPP_FUNC_CTRL(58, 61, "mpp_spi0", dove_mpp4_ctrl),
+	MPP_FUNC_CTRL(62, 63, "mpp_uart1", dove_mpp4_ctrl),
+	MPP_FUNC_CTRL(64, 71, "mpp_nand", dove_nand_ctrl),
+	MPP_FUNC_CTRL(72, 72, "audio0", dove_audio0_ctrl),
+	MPP_FUNC_CTRL(73, 73, "twsi", dove_twsi_ctrl),
+};
+
+static struct mvebu_mpp_mode dove_mpp_modes[] = {
+	MPP_MODE(0,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x02, "uart2", "rts"),
+		MPP_FUNCTION(0x03, "sdio0", "cd"),
+		MPP_FUNCTION(0x0f, "lcd0", "pwm"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(1,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x02, "uart2", "cts"),
+		MPP_FUNCTION(0x03, "sdio0", "wp"),
+		MPP_FUNCTION(0x0f, "lcd1", "pwm"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(2,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x01, "sata", "prsnt"),
+		MPP_FUNCTION(0x02, "uart2", "txd"),
+		MPP_FUNCTION(0x03, "sdio0", "buspwr"),
+		MPP_FUNCTION(0x04, "uart1", "rts"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(3,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x01, "sata", "act"),
+		MPP_FUNCTION(0x02, "uart2", "rxd"),
+		MPP_FUNCTION(0x03, "sdio0", "ledctrl"),
+		MPP_FUNCTION(0x04, "uart1", "cts"),
+		MPP_FUNCTION(0x0f, "lcd-spi", "cs1"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(4,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x02, "uart3", "rts"),
+		MPP_FUNCTION(0x03, "sdio1", "cd"),
+		MPP_FUNCTION(0x04, "spi1", "miso"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(5,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x02, "uart3", "cts"),
+		MPP_FUNCTION(0x03, "sdio1", "wp"),
+		MPP_FUNCTION(0x04, "spi1", "cs"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(6,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x02, "uart3", "txd"),
+		MPP_FUNCTION(0x03, "sdio1", "buspwr"),
+		MPP_FUNCTION(0x04, "spi1", "mosi"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(7,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x02, "uart3", "rxd"),
+		MPP_FUNCTION(0x03, "sdio1", "ledctrl"),
+		MPP_FUNCTION(0x04, "spi1", "sck"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(8,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x01, "watchdog", "rstout"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(9,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x05, "pex1", "clkreq"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(10,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x05, "ssp", "sclk"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(11,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x01, "sata", "prsnt"),
+		MPP_FUNCTION(0x02, "sata-1", "act"),
+		MPP_FUNCTION(0x03, "sdio0", "ledctrl"),
+		MPP_FUNCTION(0x04, "sdio1", "ledctrl"),
+		MPP_FUNCTION(0x05, "pex0", "clkreq"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(12,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x01, "sata", "act"),
+		MPP_FUNCTION(0x02, "uart2", "rts"),
+		MPP_FUNCTION(0x03, "audio0", "extclk"),
+		MPP_FUNCTION(0x04, "sdio1", "cd"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(13,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x02, "uart2", "cts"),
+		MPP_FUNCTION(0x03, "audio1", "extclk"),
+		MPP_FUNCTION(0x04, "sdio1", "wp"),
+		MPP_FUNCTION(0x05, "ssp", "extclk"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(14,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x02, "uart2", "txd"),
+		MPP_FUNCTION(0x04, "sdio1", "buspwr"),
+		MPP_FUNCTION(0x05, "ssp", "rxd"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(15,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x02, "uart2", "rxd"),
+		MPP_FUNCTION(0x04, "sdio1", "ledctrl"),
+		MPP_FUNCTION(0x05, "ssp", "sfrm"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(16,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x02, "uart3", "rts"),
+		MPP_FUNCTION(0x03, "sdio0", "cd"),
+		MPP_FUNCTION(0x04, "lcd-spi", "cs1"),
+		MPP_FUNCTION(0x05, "ac97", "sdi1")),
+	MPP_MODE(17,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x01, "ac97-1", "sysclko"),
+		MPP_FUNCTION(0x02, "uart3", "cts"),
+		MPP_FUNCTION(0x03, "sdio0", "wp"),
+		MPP_FUNCTION(0x04, "twsi", "sda"),
+		MPP_FUNCTION(0x05, "ac97", "sdi2")),
+	MPP_MODE(18,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x02, "uart3", "txd"),
+		MPP_FUNCTION(0x03, "sdio0", "buspwr"),
+		MPP_FUNCTION(0x04, "lcd0", "pwm"),
+		MPP_FUNCTION(0x05, "ac97", "sdi3")),
+	MPP_MODE(19,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x02, "uart3", "rxd"),
+		MPP_FUNCTION(0x03, "sdio0", "ledctrl"),
+		MPP_FUNCTION(0x04, "twsi", "sck")),
+	MPP_MODE(20,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x01, "ac97", "sysclko"),
+		MPP_FUNCTION(0x02, "lcd-spi", "miso"),
+		MPP_FUNCTION(0x03, "sdio1", "cd"),
+		MPP_FUNCTION(0x05, "sdio0", "cd"),
+		MPP_FUNCTION(0x06, "spi1", "miso")),
+	MPP_MODE(21,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x01, "uart1", "rts"),
+		MPP_FUNCTION(0x02, "lcd-spi", "cs0"),
+		MPP_FUNCTION(0x03, "sdio1", "wp"),
+		MPP_FUNCTION(0x04, "ssp", "sfrm"),
+		MPP_FUNCTION(0x05, "sdio0", "wp"),
+		MPP_FUNCTION(0x06, "spi1", "cs")),
+	MPP_MODE(22,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x01, "uart1", "cts"),
+		MPP_FUNCTION(0x02, "lcd-spi", "mosi"),
+		MPP_FUNCTION(0x03, "sdio1", "buspwr"),
+		MPP_FUNCTION(0x04, "ssp", "txd"),
+		MPP_FUNCTION(0x05, "sdio0", "buspwr"),
+		MPP_FUNCTION(0x06, "spi1", "mosi")),
+	MPP_MODE(23,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x02, "lcd-spi", "sck"),
+		MPP_FUNCTION(0x03, "sdio1", "ledctrl"),
+		MPP_FUNCTION(0x04, "ssp", "sclk"),
+		MPP_FUNCTION(0x05, "sdio0", "ledctrl"),
+		MPP_FUNCTION(0x06, "spi1", "sck")),
+	MPP_MODE(24,
+		MPP_FUNCTION(0x00, "camera", NULL),
+		MPP_FUNCTION(0x01, "gpio", NULL)),
+	MPP_MODE(40,
+		MPP_FUNCTION(0x00, "sdio0", NULL),
+		MPP_FUNCTION(0x01, "gpio", NULL)),
+	MPP_MODE(46,
+		MPP_FUNCTION(0x00, "sdio1", NULL),
+		MPP_FUNCTION(0x01, "gpio", NULL)),
+	MPP_MODE(52,
+		MPP_FUNCTION(0x00, "i2s1/spdifo", NULL),
+		MPP_FUNCTION(0x02, "i2s1", NULL),
+		MPP_FUNCTION(0x08, "spdifo", NULL),
+		MPP_FUNCTION(0x0a, "gpio", NULL),
+		MPP_FUNCTION(0x0b, "twsi", NULL),
+		MPP_FUNCTION(0x0c, "ssp/spdifo", NULL),
+		MPP_FUNCTION(0x0e, "ssp", NULL),
+		MPP_FUNCTION(0x0f, "ssp/twsi", NULL)),
+	MPP_MODE(58,
+		MPP_FUNCTION(0x00, "spi0", NULL),
+		MPP_FUNCTION(0x01, "gpio", NULL)),
+	MPP_MODE(62,
+		MPP_FUNCTION(0x00, "uart1", NULL),
+		MPP_FUNCTION(0x01, "gpio", NULL)),
+	MPP_MODE(64,
+		MPP_FUNCTION(0x00, "nand", NULL),
+		MPP_FUNCTION(0x01, "gpo", NULL)),
+	MPP_MODE(72,
+		MPP_FUNCTION(0x00, "i2s", NULL),
+		MPP_FUNCTION(0x01, "ac97", NULL)),
+	MPP_MODE(73,
+		MPP_FUNCTION(0x00, "none", NULL),
+		MPP_FUNCTION(0x01, "opt1", NULL),
+		MPP_FUNCTION(0x02, "opt2", NULL),
+		MPP_FUNCTION(0x03, "opt3", NULL)),
+};
+
+static struct pinctrl_gpio_range dove_mpp_gpio_ranges[] = {
+	MPP_GPIO_RANGE(0,  0,  0, 32),
+	MPP_GPIO_RANGE(1, 32, 32, 32),
+	MPP_GPIO_RANGE(2, 64, 64,  8),
+};
+
+static struct mvebu_pinctrl_soc_info dove_pinctrl_info = {
+	.controls = dove_mpp_controls,
+	.ncontrols = ARRAY_SIZE(dove_mpp_controls),
+	.modes = dove_mpp_modes,
+	.nmodes = ARRAY_SIZE(dove_mpp_modes),
+	.gpioranges = dove_mpp_gpio_ranges,
+	.ngpioranges = ARRAY_SIZE(dove_mpp_gpio_ranges),
+	.variant = 0,
+};
+
+static struct clk *pdma_clk;
+
+static struct of_device_id dove_pinctrl_of_match[] __devinitdata = {
+	{ .compatible = "marvell,dove-pinctrl", .data = &dove_pinctrl_info },
+	{ }
+};
+
+static int __devinit dove_pinctrl_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *match =
+		of_match_device(dove_pinctrl_of_match, &pdev->dev);
+	int ret;
+
+	if (match)
+		pdev->dev.platform_data = match->data;
+
+	/*
+	 * General MPP Configuration Register is part of pdma registers.
+	 * grab clk to make sure it is clocked.
+	 */
+	pdma_clk = clk_get_sys("dove-pdma", NULL);
+	if (IS_ERR(pdma_clk)) {
+		dev_err(&pdev->dev, "unable to get pdma clk\n");
+		return -ENODEV;
+	}
+
+	clk_prepare_enable(pdma_clk);
+	ret = mvebu_pinctrl_probe(pdev);
+	if (!ret)
+		return 0;
+
+	clk_disable_unprepare(pdma_clk);
+	clk_put(pdma_clk);
+	return ret;
+}
+
+static int __devexit dove_pinctrl_remove(struct platform_device *pdev)
+{
+	int ret;
+
+	ret = mvebu_pinctrl_remove(pdev);
+	if (!IS_ERR(pdma_clk)) {
+		clk_disable_unprepare(pdma_clk);
+		clk_put(pdma_clk);
+	}
+	return ret;
+}
+
+static struct platform_driver dove_pinctrl_driver = {
+	.driver = {
+		.name = "dove-pinctrl",
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(dove_pinctrl_of_match),
+	},
+	.probe = dove_pinctrl_probe,
+	.remove = __devexit_p(dove_pinctrl_remove),
+};
+
+module_platform_driver(dove_pinctrl_driver);
+
+MODULE_AUTHOR("Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>");
+MODULE_DESCRIPTION("Marvell Dove pinctrl driver");
+MODULE_LICENSE("GPL v2");
-- 
1.7.10.4

[PATCH 03/11] pinctrl: mvebu: kirkwood pinctrl driver

From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: 2012-08-11 12:57:41

This patch adds a SoC specific pinctrl driver for Marvell Kirkwood SoCs
plus DT binding documentation. This driver will use the mvebu pinctrl
driver core.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Cc: Grant Likely <redacted>
Cc: Rob Herring <redacted>
Cc: Rob Landley <redacted>
Cc: Russell King <redacted>
Cc: Linus Walleij <redacted>
Cc: Lior Amsalem <redacted>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory CLEMENT <redacted>
Cc: Ben Dooks <redacted>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Thomas Petazzoni <redacted>
Cc: devicetree-discuss at lists.ozlabs.org
Cc: linux-doc at vger.kernel.org
Cc: linux-kernel at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
---
 .../bindings/pinctrl/marvell,kirkwood-pinctrl.txt  |  279 ++++++++++++
 arch/arm/Kconfig                                   |    1 +
 drivers/pinctrl/Kconfig                            |    9 +-
 drivers/pinctrl/Makefile                           |    1 +
 drivers/pinctrl/pinctrl-kirkwood.c                 |  460 ++++++++++++++++++++
 5 files changed, 749 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt
 create mode 100644 drivers/pinctrl/pinctrl-kirkwood.c
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt
new file mode 100644
index 0000000..361bccb
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt
@@ -0,0 +1,279 @@
+* Marvell Kirkwood SoC pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "marvell,88f6180-pinctrl",
+              "marvell,88f6190-pinctrl", "marvell,88f6192-pinctrl",
+              "marvell,88f6281-pinctrl", "marvell,88f6282-pinctrl"
+
+This driver supports all kirkwood variants, i.e. 88f6180, 88f619x, and 88f628x.
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+* Marvell Kirkwood 88f6180
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, nand(io2), spi(cs)
+mpp1          1        gpo, nand(io3), spi(mosi)
+mpp2          2        gpo, nand(io4), spi(sck)
+mpp3          3        gpo, nand(io5), spi(miso)
+mpp4          4        gpio, nand(io6), uart0(rxd), ptp(clk)
+mpp5          5        gpo, nand(io7), uart0(txd), ptp(trig)
+mpp6          6        sysrst(out), spi(mosi), ptp(trig)
+mpp7          7        gpo, pex(rsto), spi(cs), ptp(trig)
+mpp8          8        gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk),
+                       mii(col)
+mpp9          9        gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq),
+                       mii(crs)
+mpp10         10       gpo, spi(sck), uart0(txd), ptp(trig)
+mpp11         11       gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq),
+                       ptp-2(trig)
+mpp12         12       gpo, sdio(clk)
+mpp13         13       gpio, sdio(cmd), uart1(txd)
+mpp14         14       gpio, sdio(d0), uart1(rxd), mii(col)
+mpp15         15       gpio, sdio(d1), uart0(rts), uart1(txd)
+mpp16         16       gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs)
+mpp17         17       gpio, sdio(d3)
+mpp18         18       gpo, nand(io0)
+mpp19         19       gpo, nand(io1)
+mpp20         20       gpio, mii(rxerr)
+mpp21         21       gpio, audio(spdifi)
+mpp22         22       gpio, audio(spdifo)
+mpp23         23       gpio, audio(rmclk)
+mpp24         24       gpio, audio(bclk)
+mpp25         25       gpio, audio(sdo)
+mpp26         26       gpio, audio(lrclk)
+mpp27         27       gpio, audio(mclk)
+mpp28         28       gpio, audio(sdi)
+mpp29         29       gpio, audio(extclk)
+
+* Marvell Kirkwood 88f6190
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, nand(io2), spi(cs)
+mpp1          1        gpo, nand(io3), spi(mosi)
+mpp2          2        gpo, nand(io4), spi(sck)
+mpp3          3        gpo, nand(io5), spi(miso)
+mpp4          4        gpio, nand(io6), uart0(rxd), ptp(clk)
+mpp5          5        gpo, nand(io7), uart0(txd), ptp(trig), sata0(act)
+mpp6          6        sysrst(out), spi(mosi), ptp(trig)
+mpp7          7        gpo, pex(rsto), spi(cs), ptp(trig)
+mpp8          8        gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk),
+                       mii(col), mii-1(rxerr)
+mpp9          9        gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq),
+                       mii(crs), sata0(prsnt)
+mpp10         10       gpo, spi(sck), uart0(txd), ptp(trig)
+mpp11         11       gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq),
+                       ptp-2(trig), sata0(act)
+mpp12         12       gpo, sdio(clk)
+mpp13         13       gpio, sdio(cmd), uart1(txd)
+mpp14         14       gpio, sdio(d0), uart1(rxd), mii(col)
+mpp15         15       gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act)
+mpp16         16       gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs)
+mpp17         17       gpio, sdio(d3), sata0(prsnt)
+mpp18         18       gpo, nand(io0)
+mpp19         19       gpo, nand(io1)
+mpp20         20       gpio, ge1(txd0)
+mpp21         21       gpio, ge1(txd1), sata0(act)
+mpp22         22       gpio, ge1(txd2)
+mpp23         23       gpio, ge1(txd3), sata0(prsnt)
+mpp24         24       gpio, ge1(rxd0)
+mpp25         25       gpio, ge1(rxd1)
+mpp26         26       gpio, ge1(rxd2)
+mpp27         27       gpio, ge1(rxd3)
+mpp28         28       gpio, ge1(col)
+mpp29         29       gpio, ge1(txclk)
+mpp30         30       gpio, ge1(rxclk)
+mpp31         31       gpio, ge1(rxclk)
+mpp32         32       gpio, ge1(txclko)
+mpp33         33       gpo, ge1(txclk)
+mpp34         34       gpio, ge1(txen)
+mpp35         35       gpio, ge1(rxerr), sata0(act), mii(rxerr)
+
+* Marvell Kirkwood 88f6192
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, nand(io2), spi(cs)
+mpp1          1        gpo, nand(io3), spi(mosi)
+mpp2          2        gpo, nand(io4), spi(sck)
+mpp3          3        gpo, nand(io5), spi(miso)
+mpp4          4        gpio, nand(io6), uart0(rxd), ptp(clk), sata1(act)
+mpp5          5        gpo, nand(io7), uart0(txd), ptp(trig), sata0(act)
+mpp6          6        sysrst(out), spi(mosi), ptp(trig)
+mpp7          7        gpo, pex(rsto), spi(cs), ptp(trig)
+mpp8          8        gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk),
+                       mii(col), mii-1(rxerr), sata1(prsnt)
+mpp9          9        gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq),
+                       mii(crs), sata0(prsnt)
+mpp10         10       gpo, spi(sck), uart0(txd), ptp(trig), sata1(act)
+mpp11         11       gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq),
+                       ptp-2(trig), sata0(act)
+mpp12         12       gpo, sdio(clk)
+mpp13         13       gpio, sdio(cmd), uart1(txd)
+mpp14         14       gpio, sdio(d0), uart1(rxd), mii(col), sata1(prsnt)
+mpp15         15       gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act)
+mpp16         16       gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs),
+                       sata1(act)
+mpp17         17       gpio, sdio(d3), sata0(prsnt)
+mpp18         18       gpo, nand(io0)
+mpp19         19       gpo, nand(io1)
+mpp20         20       gpio, ge1(txd0), ts(mp0), tdm(tx0ql), audio(spdifi),
+                       sata1(act)
+mpp21         21       gpio, ge1(txd1), sata0(act), ts(mp1), tdm(rx0ql),
+                       audio(spdifo)
+mpp22         22       gpio, ge1(txd2), ts(mp2), tdm(tx2ql), audio(rmclk),
+                       sata1(prsnt)
+mpp23         23       gpio, ge1(txd3), sata0(prsnt), ts(mp3), tdm(rx2ql),
+                       audio(bclk)
+mpp24         24       gpio, ge1(rxd0), ts(mp4), tdm(spi-cs0), audio(sdo)
+mpp25         25       gpio, ge1(rxd1), ts(mp5), tdm(spi-sck), audio(lrclk)
+mpp26         26       gpio, ge1(rxd2), ts(mp6), tdm(spi-miso), audio(mclk)
+mpp27         27       gpio, ge1(rxd3), ts(mp7), tdm(spi-mosi), audio(sdi)
+mpp28         28       gpio, ge1(col), ts(mp8), tdm(int), audio(extclk)
+mpp29         29       gpio, ge1(txclk), ts(mp9), tdm(rst)
+mpp30         30       gpio, ge1(rxclk), ts(mp10), tdm(pclk)
+mpp31         31       gpio, ge1(rxclk), ts(mp11), tdm(fs)
+mpp32         32       gpio, ge1(txclko), ts(mp12), tdm(drx)
+mpp33         33       gpo, ge1(txclk), tdm(drx)
+mpp34         34       gpio, ge1(txen), tdm(spi-cs1)
+mpp35         35       gpio, ge1(rxerr), sata0(act), mii(rxerr), tdm(tx0ql)
+
+* Marvell Kirkwood 88f6281
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, nand(io2), spi(cs)
+mpp1          1        gpo, nand(io3), spi(mosi)
+mpp2          2        gpo, nand(io4), spi(sck)
+mpp3          3        gpo, nand(io5), spi(miso)
+mpp4          4        gpio, nand(io6), uart0(rxd), ptp(clk), sata1(act)
+mpp5          5        gpo, nand(io7), uart0(txd), ptp(trig), sata0(act)
+mpp6          6        sysrst(out), spi(mosi), ptp(trig)
+mpp7          7        gpo, pex(rsto), spi(cs), ptp(trig)
+mpp8          8        gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk),
+                       mii(col), mii-1(rxerr), sata1(prsnt)
+mpp9          9        gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq),
+                       mii(crs), sata0(prsnt)
+mpp10         10       gpo, spi(sck), uart0(txd), ptp(trig), sata1(act)
+mpp11         11       gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq),
+                       ptp-2(trig), sata0(act)
+mpp12         12       gpio, sdio(clk)
+mpp13         13       gpio, sdio(cmd), uart1(txd)
+mpp14         14       gpio, sdio(d0), uart1(rxd), mii(col), sata1(prsnt)
+mpp15         15       gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act)
+mpp16         16       gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs),
+                       sata1(act)
+mpp17         17       gpio, sdio(d3), sata0(prsnt)
+mpp18         18       gpo, nand(io0)
+mpp19         19       gpo, nand(io1)
+mpp20         20       gpio, ge1(txd0), ts(mp0), tdm(tx0ql), audio(spdifi),
+                       sata1(act)
+mpp21         21       gpio, ge1(txd1), sata0(act), ts(mp1), tdm(rx0ql),
+                       audio(spdifo)
+mpp22         22       gpio, ge1(txd2), ts(mp2), tdm(tx2ql), audio(rmclk),
+                       sata1(prsnt)
+mpp23         23       gpio, ge1(txd3), sata0(prsnt), ts(mp3), tdm(rx2ql),
+                       audio(bclk)
+mpp24         24       gpio, ge1(rxd0), ts(mp4), tdm(spi-cs0), audio(sdo)
+mpp25         25       gpio, ge1(rxd1), ts(mp5), tdm(spi-sck), audio(lrclk)
+mpp26         26       gpio, ge1(rxd2), ts(mp6), tdm(spi-miso), audio(mclk)
+mpp27         27       gpio, ge1(rxd3), ts(mp7), tdm(spi-mosi), audio(sdi)
+mpp28         28       gpio, ge1(col), ts(mp8), tdm(int), audio(extclk)
+mpp29         29       gpio, ge1(txclk), ts(mp9), tdm(rst)
+mpp30         30       gpio, ge1(rxclk), ts(mp10), tdm(pclk)
+mpp31         31       gpio, ge1(rxclk), ts(mp11), tdm(fs)
+mpp32         32       gpio, ge1(txclko), ts(mp12), tdm(drx)
+mpp33         33       gpo, ge1(txclk), tdm(drx)
+mpp34         34       gpio, ge1(txen), tdm(spi-cs1), sata1(act)
+mpp35         35       gpio, ge1(rxerr), sata0(act), mii(rxerr), tdm(tx0ql)
+mpp36         36       gpio, ts(mp0), tdm(spi-cs1), audio(spdifi)
+mpp37         37       gpio, ts(mp1), tdm(tx2ql), audio(spdifo)
+mpp38         38       gpio, ts(mp2), tdm(rx2ql), audio(rmclk)
+mpp39         39       gpio, ts(mp3), tdm(spi-cs0), audio(bclk)
+mpp40         40       gpio, ts(mp4), tdm(spi-sck), audio(sdo)
+mpp41         41       gpio, ts(mp5), tdm(spi-miso), audio(lrclk)
+mpp42         42       gpio, ts(mp6), tdm(spi-mosi), audio(mclk)
+mpp43         43       gpio, ts(mp7), tdm(int), audio(sdi)
+mpp44         44       gpio, ts(mp8), tdm(rst), audio(extclk)
+mpp45         45       gpio, ts(mp9), tdm(pclk)
+mpp46         46       gpio, ts(mp10), tdm(fs)
+mpp47         47       gpio, ts(mp11), tdm(drx)
+mpp48         48       gpio, ts(mp12), tdm(dtx)
+mpp49         49       gpio, ts(mp9), tdm(rx0ql), ptp(clk)
+
+* Marvell Kirkwood 88f6282
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, nand(io2), spi(cs)
+mpp1          1        gpo, nand(io3), spi(mosi)
+mpp2          2        gpo, nand(io4), spi(sck)
+mpp3          3        gpo, nand(io5), spi(miso)
+mpp4          4        gpio, nand(io6), uart0(rxd), sata1(act), lcd(hsync)
+mpp5          5        gpo, nand(io7), uart0(txd), sata0(act), lcd(vsync)
+mpp6          6        sysrst(out), spi(mosi)
+mpp7          7        gpo, spi(cs), lcd(pwm)
+mpp8          8        gpio, twsi0(sda), uart0(rts), uart1(rts), mii(col),
+                       mii-1(rxerr), sata1(prsnt)
+mpp9          9        gpio, twsi(sck), uart0(cts), uart1(cts), mii(crs),
+                       sata0(prsnt)
+mpp10         10       gpo, spi(sck), uart0(txd), sata1(act)
+mpp11         11       gpio, spi(miso), uart0(rxd), sata0(act)
+mpp12         12       gpo, sdio(clk), audio(spdifo), spi(mosi), twsi(sda)
+mpp13         13       gpio, sdio(cmd), uart1(txd), audio(rmclk), lcd(pwm)
+mpp14         14       gpio, sdio(d0), uart1(rxd), mii(col), sata1(prsnt),
+                       audio(spdifi), audio-1(sdi)
+mpp15         15       gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act),
+                       spi(cs)
+mpp16         16       gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs),
+                       sata1(act), lcd(extclk)
+mpp17         17       gpio, sdio(d3), sata0(prsnt), sata1(act), twsi1(sck)
+mpp18         18       gpo, nand(io0), pex(clkreq)
+mpp19         19       gpo, nand(io1)
+mpp20         20       gpio, ge1(txd0), ts(mp0), tdm(tx0ql), audio(spdifi),
+                       sata1(act), lcd(d0)
+mpp21         21       gpio, ge1(txd1), sata0(act), ts(mp1), tdm(rx0ql),
+                       audio(spdifo), lcd(d1)
+mpp22         22       gpio, ge1(txd2), ts(mp2), tdm(tx2ql), audio(rmclk),
+                       sata1(prsnt), lcd(d2)
+mpp23         23       gpio, ge1(txd3), sata0(prsnt), ts(mp3), tdm(rx2ql),
+                       audio(bclk), lcd(d3)
+mpp24         24       gpio, ge1(rxd0), ts(mp4), tdm(spi-cs0), audio(sdo),
+                       lcd(d4)
+mpp25         25       gpio, ge1(rxd1), ts(mp5), tdm(spi-sck), audio(lrclk),
+                       lcd(d5)
+mpp26         26       gpio, ge1(rxd2), ts(mp6), tdm(spi-miso), audio(mclk),
+                       lcd(d6)
+mpp27         27       gpio, ge1(rxd3), ts(mp7), tdm(spi-mosi), audio(sdi),
+                       lcd(d7)
+mpp28         28       gpio, ge1(col), ts(mp8), tdm(int), audio(extclk),
+                       lcd(d8)
+mpp29         29       gpio, ge1(txclk), ts(mp9), tdm(rst), lcd(d9)
+mpp30         30       gpio, ge1(rxclk), ts(mp10), tdm(pclk), lcd(d10)
+mpp31         31       gpio, ge1(rxclk), ts(mp11), tdm(fs), lcd(d11)
+mpp32         32       gpio, ge1(txclko), ts(mp12), tdm(drx), lcd(d12)
+mpp33         33       gpo, ge1(txclk), tdm(drx), lcd(d13)
+mpp34         34       gpio, ge1(txen), tdm(spi-cs1), sata1(act), lcd(d14)
+mpp35         35       gpio, ge1(rxerr), sata0(act), mii(rxerr), tdm(tx0ql),
+                       lcd(d15)
+mpp36         36       gpio, ts(mp0), tdm(spi-cs1), audio(spdifi), twsi1(sda)
+mpp37         37       gpio, ts(mp1), tdm(tx2ql), audio(spdifo), twsi1(sck)
+mpp38         38       gpio, ts(mp2), tdm(rx2ql), audio(rmclk), lcd(d18)
+mpp39         39       gpio, ts(mp3), tdm(spi-cs0), audio(bclk), lcd(d19)
+mpp40         40       gpio, ts(mp4), tdm(spi-sck), audio(sdo), lcd(d20)
+mpp41         41       gpio, ts(mp5), tdm(spi-miso), audio(lrclk), lcd(d21)
+mpp42         42       gpio, ts(mp6), tdm(spi-mosi), audio(mclk), lcd(d22)
+mpp43         43       gpio, ts(mp7), tdm(int), audio(sdi), lcd(d23)
+mpp44         44       gpio, ts(mp8), tdm(rst), audio(extclk), lcd(clk)
+mpp45         45       gpio, ts(mp9), tdm(pclk), lcd(e)
+mpp46         46       gpio, ts(mp10), tdm(fs), lcd(hsync)
+mpp47         47       gpio, ts(mp11), tdm(drx), lcd(vsync)
+mpp48         48       gpio, ts(mp12), tdm(dtx), lcd(d16)
+mpp49         49       gpo, tdm(rx0ql), pex(clkreq), lcd(d17)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index cd3d827..361f513 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -596,6 +596,7 @@ config ARCH_KIRKWOOD
 	select GENERIC_CLOCKEVENTS
 	select NEED_MACH_IO_H
 	select PLAT_ORION
+	select PINCTRL
 	help
 	  Support for the following Marvell Kirkwood series SoCs:
 	  88F6180, 88F6192 and 88F6281.
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index e2427eb..1f84090 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -147,7 +147,7 @@ config PINCTRL_COH901
 
 config PINCTRL_MVEBU
 	bool "Marvell SoC pin controller drivers"
-	depends on ARCH_MVEBU || ARCH_DOVE
+	depends on ARCH_MVEBU || ARCH_DOVE || ARCH_KIRKWOOD
 	select PINMUX
 	select PINCONF
 	help
@@ -162,6 +162,13 @@ config PINCTRL_DOVE
 	  Say yes here to support pinctrl driver on Marvell Dove SoCs
 	  (88AP510).
 
+config PINCTRL_KIRKWOOD
+	bool "Support for Marvell Kirkwood SoCs"
+	depends on PINCTRL_MVEBU
+	help
+	  Say yes here to support pinctrl driver on Marvell Kirkwood SoCs
+	  (88f6180, 88f6190, 88f6192, 88f6281, 88f6282).
+
 source "drivers/pinctrl/spear/Kconfig"
 
 endmenu
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index d1327df..3006294 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -31,5 +31,6 @@ obj-$(CONFIG_PINCTRL_U300)	+= pinctrl-u300.o
 obj-$(CONFIG_PINCTRL_COH901)	+= pinctrl-coh901.o
 obj-$(CONFIG_PINCTRL_MVEBU)	+= pinctrl-mvebu.o
 obj-$(CONFIG_PINCTRL_DOVE)	+= pinctrl-dove.o
+obj-$(CONFIG_PINCTRL_KIRKWOOD)	+= pinctrl-kirkwood.o
 
 obj-$(CONFIG_PLAT_SPEAR)	+= spear/
diff --git a/drivers/pinctrl/pinctrl-kirkwood.c b/drivers/pinctrl/pinctrl-kirkwood.c
new file mode 100644
index 0000000..ef07f28
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-kirkwood.c
@@ -0,0 +1,460 @@
+/*
+ * Marvell Kirkwood pinctrl driver based on mvebu pinctrl core
+ *
+ * Author: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-mvebu.h"
+
+#define V(f6180, f6190, f6192, f6281, f6282)		\
+	((f6180 << 0) | (f6190 << 1) | (f6192 << 2) |	\
+	 (f6281 << 3) | (f6282 << 4))
+
+#define VARIANT_MV88F6180	V(1, 0, 0, 0, 0)
+#define VARIANT_MV88F6190	V(0, 1, 0, 0, 0)
+#define VARIANT_MV88F6192	V(0, 0, 1, 0, 0)
+#define VARIANT_MV88F6281	V(0, 0, 0, 1, 0)
+#define VARIANT_MV88F6282	V(0, 0, 0, 0, 1)
+
+static struct mvebu_mpp_mode mv88f6xxx_mpp_modes[] = {
+	MPP_MODE(0,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "nand", "io2",     V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "spi", "cs",       V(1, 1, 1, 1, 1))),
+	MPP_MODE(1,
+		MPP_VAR_FUNCTION(0x0, "gpo", NULL,       V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "nand", "io3",     V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "spi", "mosi",     V(1, 1, 1, 1, 1))),
+	MPP_MODE(2,
+		MPP_VAR_FUNCTION(0x0, "gpo", NULL,       V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "nand", "io4",     V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "spi", "sck",      V(1, 1, 1, 1, 1))),
+	MPP_MODE(3,
+		MPP_VAR_FUNCTION(0x0, "gpo", NULL,       V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "nand", "io5",     V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "spi", "miso",     V(1, 1, 1, 1, 1))),
+	MPP_MODE(4,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "nand", "io6",     V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "uart0", "rxd",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x5, "sata1", "act",    V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "hsync",    V(0, 0, 0, 0, 1)),
+		MPP_VAR_FUNCTION(0xd, "ptp", "clk",      V(1, 1, 1, 1, 0))),
+	MPP_MODE(5,
+		MPP_VAR_FUNCTION(0x0, "gpo", NULL,       V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "nand", "io7",     V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "uart0", "txd",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "ptp", "trig",     V(1, 1, 1, 1, 0)),
+		MPP_VAR_FUNCTION(0x5, "sata0", "act",    V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "vsync",    V(0, 0, 0, 0, 1))),
+	MPP_MODE(6,
+		MPP_VAR_FUNCTION(0x0, "sysrst", "out",   V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "spi", "mosi",     V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "ptp", "trig",     V(1, 1, 1, 1, 0))),
+	MPP_MODE(7,
+		MPP_VAR_FUNCTION(0x0, "gpo", NULL,       V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "pex", "rsto",     V(1, 1, 1, 1, 0)),
+		MPP_VAR_FUNCTION(0x2, "spi", "cs",       V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ptp", "trig",     V(1, 1, 1, 1, 0)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "pwm",      V(0, 0, 0, 0, 1))),
+	MPP_MODE(8,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "twsi0", "sda",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "uart0", "rts",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "uart1", "rts",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "mii-1", "rxerr",  V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x5, "sata1", "prsnt",  V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xc, "ptp", "clk",      V(1, 1, 1, 1, 0)),
+		MPP_VAR_FUNCTION(0xd, "mii", "col",      V(1, 1, 1, 1, 1))),
+	MPP_MODE(9,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "twsi0", "sck",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "uart0", "cts",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "uart1", "cts",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x5, "sata0", "prsnt",  V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xc, "ptp", "evreq",    V(1, 1, 1, 1, 0)),
+		MPP_VAR_FUNCTION(0xd, "mii", "crs",      V(1, 1, 1, 1, 1))),
+	MPP_MODE(10,
+		MPP_VAR_FUNCTION(0x0, "gpo", NULL,       V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "spi", "sck",      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0X3, "uart0", "txd",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x5, "sata1", "act",    V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xc, "ptp", "trig",     V(1, 1, 1, 1, 0))),
+	MPP_MODE(11,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "spi", "miso",     V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "uart0", "rxd",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "ptp-1", "evreq",  V(1, 1, 1, 1, 0)),
+		MPP_VAR_FUNCTION(0xc, "ptp-2", "trig",   V(1, 1, 1, 1, 0)),
+		MPP_VAR_FUNCTION(0xd, "ptp", "clk",      V(1, 1, 1, 1, 0)),
+		MPP_VAR_FUNCTION(0x5, "sata0", "act",    V(0, 1, 1, 1, 1))),
+	MPP_MODE(12,
+		MPP_VAR_FUNCTION(0x0, "gpo", NULL,       V(1, 1, 1, 0, 1)),
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 0, 0, 1, 0)),
+		MPP_VAR_FUNCTION(0x1, "sdio", "clk",     V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xa, "audio", "spdifo", V(0, 0, 0, 0, 1)),
+		MPP_VAR_FUNCTION(0xb, "spi", "mosi",     V(0, 0, 0, 0, 1)),
+		MPP_VAR_FUNCTION(0xd, "twsi1", "sda",    V(0, 0, 0, 0, 1))),
+	MPP_MODE(13,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "sdio", "cmd",     V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "uart1", "txd",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xa, "audio", "rmclk",  V(0, 0, 0, 0, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "pwm",      V(0, 0, 0, 0, 1))),
+	MPP_MODE(14,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "sdio", "d0",      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "uart1", "rxd",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "sata1", "prsnt",  V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xa, "audio", "spdifi", V(0, 0, 0, 0, 1)),
+		MPP_VAR_FUNCTION(0xb, "audio-1", "sdi",  V(0, 0, 0, 0, 1)),
+		MPP_VAR_FUNCTION(0xd, "mii", "col",      V(1, 1, 1, 1, 1))),
+	MPP_MODE(15,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "sdio", "d1",      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "uart0", "rts",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "uart1", "txd",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "sata0", "act",    V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "spi", "cs",       V(0, 0, 0, 0, 1))),
+	MPP_MODE(16,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "sdio", "d2",      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "uart0", "cts",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "uart1", "rxd",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "sata1", "act",    V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "extclk",   V(0, 0, 0, 0, 1)),
+		MPP_VAR_FUNCTION(0xd, "mii", "crs",      V(1, 1, 1, 1, 1))),
+	MPP_MODE(17,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "sdio", "d3",      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "sata0", "prsnt",  V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xa, "sata1", "act",    V(0, 0, 0, 0, 1)),
+		MPP_VAR_FUNCTION(0xd, "twsi1", "sck",    V(0, 0, 0, 0, 1))),
+	MPP_MODE(18,
+		MPP_VAR_FUNCTION(0x0, "gpo", NULL,       V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "nand", "io0",     V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "pex", "clkreq",   V(0, 0, 0, 0, 1))),
+	MPP_MODE(19,
+		MPP_VAR_FUNCTION(0x0, "gpo", NULL,       V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "nand", "io1",     V(1, 1, 1, 1, 1))),
+	MPP_MODE(20,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp0",       V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "tx0ql",    V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "txd0",     V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "spdifi", V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x5, "sata1", "act",    V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d0",       V(0, 0, 0, 0, 1)),
+		MPP_VAR_FUNCTION(0xc, "mii", "rxerr",    V(1, 0, 0, 0, 0))),
+	MPP_MODE(21,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp1",       V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "rx0ql",    V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "txd1",     V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "spdifi", V(1, 0, 0, 0, 0)),
+		MPP_VAR_FUNCTION(0x4, "audio", "spdifo", V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x5, "sata0", "act",    V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d1",       V(0, 0, 0, 0, 1))),
+	MPP_MODE(22,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp2",       V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "tx2ql",    V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "txd2",     V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "spdifo", V(1, 0, 0, 0, 0)),
+		MPP_VAR_FUNCTION(0x4, "audio", "rmclk",  V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x5, "sata1", "prsnt",  V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d2",       V(0, 0, 0, 0, 1))),
+	MPP_MODE(23,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp3",       V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "rx2ql",    V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "txd3",     V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "rmclk",  V(1, 0, 0, 0, 0)),
+		MPP_VAR_FUNCTION(0x4, "audio", "bclk",   V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x5, "sata0", "prsnt",  V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d3",       V(0, 0, 0, 0, 1))),
+	MPP_MODE(24,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp4",       V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "spi-cs0",  V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "rxd0",     V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "bclk",   V(1, 0, 0, 0, 0)),
+		MPP_VAR_FUNCTION(0x4, "audio", "sdo",    V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d4",       V(0, 0, 0, 0, 1))),
+	MPP_MODE(25,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp5",       V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "spi-sck",  V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "rxd1",     V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "sdo",    V(1, 0, 0, 0, 0)),
+		MPP_VAR_FUNCTION(0x4, "audio", "lrclk",  V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d5",       V(0, 0, 0, 0, 1))),
+	MPP_MODE(26,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp6",       V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "spi-miso", V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "rxd2",     V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "lrclk",  V(1, 0, 0, 0, 0)),
+		MPP_VAR_FUNCTION(0x4, "audio", "mclk",   V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d6",       V(0, 0, 0, 0, 1))),
+	MPP_MODE(27,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp7",       V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "spi-mosi", V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "rxd3",     V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "mclk",   V(1, 0, 0, 0, 0)),
+		MPP_VAR_FUNCTION(0x4, "audio", "sdi",    V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d7",       V(0, 0, 0, 0, 1))),
+	MPP_MODE(28,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp8",       V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "int",      V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "col",      V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "sdi",    V(1, 0, 0, 0, 0)),
+		MPP_VAR_FUNCTION(0x4, "audio", "extclk", V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d8",       V(0, 0, 0, 0, 1))),
+	MPP_MODE(29,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp9",       V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "rst",      V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "txclk",    V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "extclk", V(1, 0, 0, 0, 0)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d9",       V(0, 0, 0, 0, 1))),
+	MPP_MODE(30,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp10",      V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "pclk",     V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "rxctl",    V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d10",      V(0, 0, 0, 0, 1))),
+	MPP_MODE(31,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp11",      V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "fs",       V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "rxclk",    V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d11",      V(0, 0, 0, 0, 1))),
+	MPP_MODE(32,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp12",      V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "drx",      V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "txclko",   V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d12",      V(0, 0, 0, 0, 1))),
+	MPP_MODE(33,
+		MPP_VAR_FUNCTION(0x0, "gpo", NULL,       V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "dtx",      V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "txctl",    V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d13",      V(0, 0, 0, 0, 1))),
+	MPP_MODE(34,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "spi-cs1",  V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "txen",     V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x5, "sata1", "act",    V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d14",      V(0, 0, 0, 0, 1))),
+	MPP_MODE(35,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "tx0ql",    V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "rxerr",    V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x5, "sata0", "act",    V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d15",      V(0, 0, 0, 0, 1)),
+		MPP_VAR_FUNCTION(0xc, "mii", "rxerr",    V(0, 1, 1, 1, 1))),
+	MPP_MODE(36,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp0",       V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "spi-cs1",  V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "spdifi", V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "twsi1", "sda",    V(0, 0, 0, 0, 1))),
+	MPP_MODE(37,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp1",       V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "tx2ql",    V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "spdifo", V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "twsi1", "sck",    V(0, 0, 0, 0, 1))),
+	MPP_MODE(38,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp2",       V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "rx2ql",    V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "rmclk",  V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d18",      V(0, 0, 0, 0, 1))),
+	MPP_MODE(39,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp3",       V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "spi-cs0",  V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "bclk",   V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d19",      V(0, 0, 0, 0, 1))),
+	MPP_MODE(40,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp4",       V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "spi-sck",  V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "sdo",    V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d20",      V(0, 0, 0, 0, 1))),
+	MPP_MODE(41,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp5",       V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "spi-miso", V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "lrclk",  V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d21",      V(0, 0, 0, 0, 1))),
+	MPP_MODE(42,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp6",       V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "spi-mosi", V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "mclk",   V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d22",      V(0, 0, 0, 0, 1))),
+	MPP_MODE(43,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp7",       V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "int",      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "sdi",    V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d23",      V(0, 0, 0, 0, 1))),
+	MPP_MODE(44,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp8",       V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "rst",      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "extclk", V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "clk",      V(0, 0, 0, 0, 1))),
+	MPP_MODE(45,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp9",       V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "pclk",     V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "e",        V(0, 0, 0, 0, 1))),
+	MPP_MODE(46,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp10",      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "fs",       V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "hsync",    V(0, 0, 0, 0, 1))),
+	MPP_MODE(47,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp11",      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "drx",      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "vsync",    V(0, 0, 0, 0, 1))),
+	MPP_MODE(48,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp12",      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "dtx",      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d16",      V(0, 0, 0, 0, 1))),
+	MPP_MODE(49,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 0, 0, 1, 0)),
+		MPP_VAR_FUNCTION(0x0, "gpo", NULL,       V(0, 0, 0, 0, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp9",       V(0, 0, 0, 1, 0)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "rx0ql",    V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x5, "ptp", "clk",      V(0, 0, 0, 1, 0)),
+		MPP_VAR_FUNCTION(0xa, "pex", "clkreq",   V(0, 0, 0, 0, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d17",      V(0, 0, 0, 0, 1))),
+};
+
+static struct mvebu_mpp_ctrl mv88f6180_mpp_controls[] = {
+	MPP_REG_CTRL(0, 29),
+};
+
+static struct pinctrl_gpio_range mv88f6180_gpio_ranges[] = {
+	MPP_GPIO_RANGE(0, 0, 0, 30),
+};
+
+static struct mvebu_mpp_ctrl mv88f619x_mpp_controls[] = {
+	MPP_REG_CTRL(0, 35),
+};
+
+static struct pinctrl_gpio_range mv88f619x_gpio_ranges[] = {
+	MPP_GPIO_RANGE(0,  0,  0, 32),
+	MPP_GPIO_RANGE(1, 32, 32,  4),
+};
+
+static struct mvebu_mpp_ctrl mv88f628x_mpp_controls[] = {
+	MPP_REG_CTRL(0, 49),
+};
+
+static struct pinctrl_gpio_range mv88f628x_gpio_ranges[] = {
+	MPP_GPIO_RANGE(0,  0,  0, 32),
+	MPP_GPIO_RANGE(1, 32, 32, 18),
+};
+
+static struct mvebu_pinctrl_soc_info kirkwood_pinctrl_info;
+
+static struct of_device_id kirkwood_pinctrl_of_match[] __devinitdata = {
+	{ .compatible = "marvell,88f6180-pinctrl",
+					  .data = (void *)VARIANT_MV88F6180 },
+	{ .compatible = "marvell,88f6190-pinctrl",
+					  .data = (void *)VARIANT_MV88F6190 },
+	{ .compatible = "marvell,88f6192-pinctrl",
+					  .data = (void *)VARIANT_MV88F6192 },
+	{ .compatible = "marvell,88f6281-pinctrl",
+					  .data = (void *)VARIANT_MV88F6281 },
+	{ .compatible = "marvell,88f6282-pinctrl",
+					  .data = (void *)VARIANT_MV88F6282 },
+	{ }
+};
+
+static int __devinit kirkwood_pinctrl_probe(struct platform_device *pdev)
+{
+	struct mvebu_pinctrl_soc_info *soc = &kirkwood_pinctrl_info;
+	const struct of_device_id *match =
+		of_match_device(kirkwood_pinctrl_of_match, &pdev->dev);
+
+	if (match) {
+		soc->variant = (unsigned)match->data & 0xff;
+		switch (soc->variant) {
+		case VARIANT_MV88F6180:
+			soc->controls = mv88f6180_mpp_controls;
+			soc->ncontrols = ARRAY_SIZE(mv88f6180_mpp_controls);
+			soc->modes = mv88f6xxx_mpp_modes;
+			soc->nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes);
+			soc->gpioranges = mv88f6180_gpio_ranges;
+			soc->ngpioranges = ARRAY_SIZE(mv88f6180_gpio_ranges);
+			break;
+		case VARIANT_MV88F6190:
+		case VARIANT_MV88F6192:
+			soc->controls = mv88f619x_mpp_controls;
+			soc->ncontrols = ARRAY_SIZE(mv88f619x_mpp_controls);
+			soc->modes = mv88f6xxx_mpp_modes;
+			soc->nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes);
+			soc->gpioranges = mv88f619x_gpio_ranges;
+			soc->ngpioranges = ARRAY_SIZE(mv88f619x_gpio_ranges);
+			break;
+		case VARIANT_MV88F6281:
+		case VARIANT_MV88F6282:
+			soc->controls = mv88f628x_mpp_controls;
+			soc->ncontrols = ARRAY_SIZE(mv88f628x_mpp_controls);
+			soc->modes = mv88f6xxx_mpp_modes;
+			soc->nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes);
+			soc->gpioranges = mv88f628x_gpio_ranges;
+			soc->ngpioranges = ARRAY_SIZE(mv88f628x_gpio_ranges);
+			break;
+		}
+		pdev->dev.platform_data = soc;
+	}
+	return mvebu_pinctrl_probe(pdev);
+}
+
+static int __devexit kirkwood_pinctrl_remove(struct platform_device *pdev)
+{
+	return mvebu_pinctrl_remove(pdev);
+}
+
+static struct platform_driver kirkwood_pinctrl_driver = {
+	.driver = {
+		.name = "kirkwood-pinctrl",
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(kirkwood_pinctrl_of_match),
+	},
+	.probe = kirkwood_pinctrl_probe,
+	.remove = __devexit_p(kirkwood_pinctrl_remove),
+};
+
+module_platform_driver(kirkwood_pinctrl_driver);
+
+MODULE_AUTHOR("Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>");
+MODULE_DESCRIPTION("Marvell Kirkwood pinctrl driver");
+MODULE_LICENSE("GPL v2");
-- 
1.7.10.4

[PATCH 06/11] ARM: mvebu: add pinctrl device in DT for Armada 370/XP SoCs

From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: 2012-08-11 12:57:44

From: Thomas Petazzoni <redacted>

The Armada 370 and XP SoCs have configurable muxing for a certain
number of their pins, controlled through a pinctrl driver.

The 'compatible' property is defined in the SoC-specific .dtsi files,
since the compatible string identifies the number of pins and other
SoC-specific properties.

Signed-off-by: Thomas Petazzoni <redacted>
---
Cc: Grant Likely <redacted>
Cc: Rob Herring <redacted>
Cc: Rob Landley <redacted>
Cc: Russell King <redacted>
Cc: Linus Walleij <redacted>
Cc: Lior Amsalem <redacted>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory CLEMENT <redacted>
Cc: Ben Dooks <redacted>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Thomas Petazzoni <redacted>
Cc: devicetree-discuss at lists.ozlabs.org
Cc: linux-doc at vger.kernel.org
Cc: linux-kernel at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
---
 arch/arm/boot/dts/armada-370-xp.dtsi |    7 +++++++
 1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 6b6b932..7c72a70 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -63,6 +63,13 @@
 			       reg = <0xd0020300 0x30>;
 			       interrupts = <37>, <38>, <39>, <40>;
 		};
+
+                pinctrl at d0018000 {
+                               reg = <0xd0018000 0x38>;
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               ranges;
+                };
 	};
 };
 
-- 
1.7.10.4

[PATCH 05/11] pinctrl: mvebu: add pinctrl driver for Armada XP

From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: 2012-08-11 12:57:48

From: Thomas Petazzoni <redacted>

This pinctrl driver is not a full-blown pinctrl driver from scratch:
it relies on the common pinctrl-mvebu driver, which is used for all
Marvell EBU SoCs.

Signed-off-by: Thomas Petazzoni <redacted>
---
Cc: Grant Likely <redacted>
Cc: Rob Herring <redacted>
Cc: Rob Landley <redacted>
Cc: Russell King <redacted>
Cc: Linus Walleij <redacted>
Cc: Lior Amsalem <redacted>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory CLEMENT <redacted>
Cc: Ben Dooks <redacted>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Thomas Petazzoni <redacted>
Cc: devicetree-discuss at lists.ozlabs.org
Cc: linux-doc at vger.kernel.org
Cc: linux-kernel at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
---
 .../bindings/pinctrl/marvell,armada-xp-pinctrl.txt |  100 +++++
 drivers/pinctrl/Kconfig                            |    5 +
 drivers/pinctrl/Makefile                           |    1 +
 drivers/pinctrl/pinctrl-armada-xp.c                |  466 ++++++++++++++++++++
 4 files changed, 572 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt
 create mode 100644 drivers/pinctrl/pinctrl-armada-xp.c
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt
new file mode 100644
index 0000000..bfa0a2e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt
@@ -0,0 +1,100 @@
+* Marvell Armada XP SoC pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "marvell,mv78230-pinctrl", "marvell,mv78260-pinctrl",
+              "marvell,mv78460-pinctrl"
+
+This driver supports all Armada XP variants, i.e. mv78230, mv78260, and mv78460.
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+* Marvell Armada XP (all variants)
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, ge0(txclko), lcd(d0)
+mpp1          1        gpio, ge0(txd0), lcd(d1)
+mpp2          2        gpio, ge0(txd1), lcd(d2)
+mpp3          3        gpio, ge0(txd2), lcd(d3)
+mpp4          4        gpio, ge0(txd3), lcd(d4)
+mpp5          5        gpio, ge0(txctl), lcd(d5)
+mpp6          6        gpio, ge0(rxd0), lcd(d6)
+mpp7          7        gpio, ge0(rxd1), lcd(d7)
+mpp8          8        gpio, ge0(rxd2), lcd(d8)
+mpp9          9        gpio, ge0(rxd3), lcd(d9)
+mpp10         10       gpio, ge0(rxctl), lcd(d10)
+mpp11         11       gpio, ge0(rxclk), lcd(d11)
+mpp12         12       gpio, ge0(txd4), ge1(txd0), lcd(d12)
+mpp13         13       gpio, ge0(txd5), ge1(txd1), lcd(d13)
+mpp14         14       gpio, ge0(txd6), ge1(txd2), lcd(d15)
+mpp15         15       gpio, ge0(txd7), ge1(txd3), lcd(d16)
+mpp16         16       gpio, ge0(txd7), ge1(txd3), lcd(d16)
+mpp17         17       gpio, ge0(col), ge1(txctl), lcd(d17)
+mpp18         18       gpio, ge0(rxerr), ge1(rxd0), lcd(d18), ptp(trig)
+mpp19         19       gpio, ge0(crs), ge1(rxd1), lcd(d19), ptp(evreq)
+mpp20         20       gpio, ge0(rxd4), ge1(rxd2), lcd(d20), ptp(clk)
+mpp21         21       gpio, ge0(rxd5), ge1(rxd3), lcd(d21), mem(bat)
+mpp22         22       gpio, ge0(rxd6), ge1(rxctl), lcd(d22), sata0(prsnt)
+mpp23         23       gpio, ge0(rxd7), ge1(rxclk), lcd(d23), sata1(prsnt)
+mpp24         24       gpio, lcd(hsync), sata1(prsnt), nf(bootcs-re), tdm(rst)
+mpp25         25       gpio, lcd(vsync), sata0(prsnt), nf(bootcs-we), tdm(pclk)
+mpp26         26       gpio, lcd(clk), tdm(fsync), vdd(cpu1-pd)
+mpp27         27       gpio, lcd(e), tdm(dtx), ptp(trig)
+mpp28         28       gpio, lcd(pwm), tdm(drx), ptp(evreq)
+mpp29         29       gpio, lcd(ref-clk), tdm(int0), ptp(clk), vdd(cpu0-pd)
+mpp30         30       gpio, tdm(int1), sd0(clk)
+mpp31         31       gpio, tdm(int2), sd0(cmd), vdd(cpu0-pd)
+mpp32         32       gpio, tdm(int3), sd0(d0), vdd(cpu1-pd)
+mpp33         33       gpio, tdm(int4), sd0(d1), mem(bat)
+mpp34         34       gpio, tdm(int5), sd0(d2), sata0(prsnt)
+mpp35         35       gpio, tdm(int6), sd0(d3), sata1(prsnt)
+mpp36         36       gpio, spi(mosi)
+mpp37         37       gpio, spi(miso)
+mpp38         38       gpio, spi(sck)
+mpp39         39       gpio, spi(cs0)
+mpp40         40       gpio, spi(cs1), uart2(cts), lcd(vga-hsync), vdd(cpu1-pd),
+                       pcie(clkreq0)
+mpp41         41       gpio, spi(cs2), uart2(rts), lcd(vga-vsync), sata1(prsnt),
+                       pcie(clkreq1)
+mpp42         42       gpio, uart2(rxd), uart0(cts), tdm(int7), tdm-1(timer),
+                       vdd(cpu0-pd)
+mpp43         43       gpio, uart2(txd), uart0(rts), spi(cs3), pcie(rstout),
+                       vdd(cpu2-3-pd){1}
+mpp44         44       gpio, uart2(cts), uart3(rxd), spi(cs4), pcie(clkreq2),
+                       mem(bat)
+mpp45         45       gpio, uart2(rts), uart3(txd), spi(cs5), sata1(prsnt)
+mpp46         46       gpio, uart3(rts), uart1(rts), spi(cs6), sata0(prsnt)
+mpp47         47       gpio, uart3(cts), uart1(cts), spi(cs7), pcie(clkreq3),
+                       ref(clkout)
+mpp48         48       gpio, tclk, dev(burst/last)
+
+* Marvell Armada XP (mv78260 and mv78460 only)
+
+name          pins     functions
+================================================================================
+mpp49         49       gpio, dev(we3)
+mpp50         50       gpio, dev(we2)
+mpp51         51       gpio, dev(ad16)
+mpp52         52       gpio, dev(ad17)
+mpp53         53       gpio, dev(ad18)
+mpp54         54       gpio, dev(ad19)
+mpp55         55       gpio, dev(ad20), vdd(cpu0-pd)
+mpp56         56       gpio, dev(ad21), vdd(cpu1-pd)
+mpp57         57       gpio, dev(ad22), vdd(cpu2-3-pd){1}
+mpp58         58       gpio, dev(ad23)
+mpp59         59       gpio, dev(ad24)
+mpp60         60       gpio, dev(ad25)
+mpp61         61       gpio, dev(ad26)
+mpp62         62       gpio, dev(ad27)
+mpp63         63       gpio, dev(ad28)
+mpp64         64       gpio, dev(ad29)
+mpp65         65       gpio, dev(ad30)
+mpp66         66       gpio, dev(ad31)
+
+Notes:
+* {1} vdd(cpu2-3-pd) only available on mv78460.
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index caa97cc..5502539 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -174,6 +174,11 @@ config PINCTRL_ARMADA_370
 	depends on PINCTRL_MVEBU
 	depends on MACH_ARMADA_370_XP
 
+config PINCTRL_ARMADA_XP
+	bool "Support for Marvell Armada XP SoCs"
+	depends on PINCTRL_MVEBU
+	depends on MACH_ARMADA_370_XP
+
 source "drivers/pinctrl/spear/Kconfig"
 
 endmenu
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index e6d6667..f2ea050 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -33,5 +33,6 @@ obj-$(CONFIG_PINCTRL_MVEBU)	+= pinctrl-mvebu.o
 obj-$(CONFIG_PINCTRL_DOVE)	+= pinctrl-dove.o
 obj-$(CONFIG_PINCTRL_KIRKWOOD)	+= pinctrl-kirkwood.o
 obj-$(CONFIG_PINCTRL_ARMADA_370) += pinctrl-armada-370.o
+obj-$(CONFIG_PINCTRL_ARMADA_XP)  += pinctrl-armada-xp.o
 
 obj-$(CONFIG_PLAT_SPEAR)	+= spear/
diff --git a/drivers/pinctrl/pinctrl-armada-xp.c b/drivers/pinctrl/pinctrl-armada-xp.c
new file mode 100644
index 0000000..21befef
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-armada-xp.c
@@ -0,0 +1,466 @@
+/*
+ * Marvell Armada XP pinctrl driver based on mvebu pinctrl core
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This file supports the three variants of Armada XP SoCs that are
+ * available: mv78230, mv78260 and mv78460. From a pin muxing
+ * perspective, the mv78230 has 49 MPP pins. The mv78260 and mv78460
+ * both have 67 MPP pins (more GPIOs and address lines for the memory
+ * bus mainly). The only difference between the mv78260 and the
+ * mv78460 in terms of pin muxing is the addition of two functions on
+ * pins 43 and 56 to access the VDD of the CPU2 and 3 (mv78260 has two
+ * cores, mv78460 has four cores).
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-mvebu.h"
+
+#define V_MV78230 (1 << 0)
+#define V_MV78260 (1 << 1)
+#define V_MV78460 (1 << 2)
+
+#define V_MV78230_PLUS (V_MV78230 | V_MV78260 | V_MV78460)
+#define V_MV78260_PLUS (V_MV78260 | V_MV78460)
+
+static struct mvebu_mpp_mode armada_xp_mpp_modes[] = {
+	MPP_MODE(0,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "txclko",     V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d0",         V_MV78230_PLUS)),
+	MPP_MODE(1,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "txd0",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d1",         V_MV78230_PLUS)),
+	MPP_MODE(2,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "txd1",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d2",         V_MV78230_PLUS)),
+	MPP_MODE(3,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "txd2",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d3",         V_MV78230_PLUS)),
+	MPP_MODE(4,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "txd3",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d4",         V_MV78230_PLUS)),
+	MPP_MODE(5,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "txctl",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d5",         V_MV78230_PLUS)),
+	MPP_MODE(6,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "rxd0",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d6",         V_MV78230_PLUS)),
+	MPP_MODE(7,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "rxd1",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d7",         V_MV78230_PLUS)),
+	MPP_MODE(8,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "rxd2",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d8",         V_MV78230_PLUS)),
+	MPP_MODE(9,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "rxd3",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d9",         V_MV78230_PLUS)),
+	MPP_MODE(10,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "rxctl",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d10",        V_MV78230_PLUS)),
+	MPP_MODE(11,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "rxclk",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d11",        V_MV78230_PLUS)),
+	MPP_MODE(12,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "txd4",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "ge1", "clkout",     V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d12",        V_MV78230_PLUS)),
+	MPP_MODE(13,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "txd5",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "ge1", "txd0",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d13",        V_MV78230_PLUS)),
+	MPP_MODE(14,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "txd6",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "ge1", "txd1",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d14",        V_MV78230_PLUS)),
+	MPP_MODE(15,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "txd7",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "ge1", "txd2",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d15",        V_MV78230_PLUS)),
+	MPP_MODE(16,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "txclk",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "ge1", "txd3",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d16",        V_MV78230_PLUS)),
+	MPP_MODE(17,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "col",        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "ge1", "txctl",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d17",        V_MV78230_PLUS)),
+	MPP_MODE(18,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "rxerr",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "ge1", "rxd0",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "ptp", "trig",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d18",        V_MV78230_PLUS)),
+	MPP_MODE(19,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "crs",        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "ge1", "rxd1",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "ptp", "evreq",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d19",        V_MV78230_PLUS)),
+	MPP_MODE(20,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "rxd4",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "ge1", "rxd2",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "ptp", "clk",        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d20",        V_MV78230_PLUS)),
+	MPP_MODE(21,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "rxd5",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "ge1", "rxd3",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "mem", "bat",        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d21",        V_MV78230_PLUS)),
+	MPP_MODE(22,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "rxd6",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "ge1", "rxctl",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "sata0", "prsnt",    V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d22",        V_MV78230_PLUS)),
+	MPP_MODE(23,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "rxd7",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "ge1", "rxclk",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "sata1", "prsnt",    V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d23",        V_MV78230_PLUS)),
+	MPP_MODE(24,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "sata1", "prsnt",    V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "nf", "bootcs-re",   V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "tdm", "rst",        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "hsync",      V_MV78230_PLUS)),
+	MPP_MODE(25,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "sata0", "prsnt",    V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "nf", "bootcs-we",   V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "tdm", "pclk",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "vsync",      V_MV78230_PLUS)),
+	MPP_MODE(26,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "tdm", "fsync",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "clk",        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x5, "vdd", "cpu1-pd",    V_MV78230_PLUS)),
+	MPP_MODE(27,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ptp", "trig",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "tdm", "dtx",        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "e",          V_MV78230_PLUS)),
+	MPP_MODE(28,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ptp", "evreq",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "tdm", "drx",        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "pwm",        V_MV78230_PLUS)),
+	MPP_MODE(29,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ptp", "clk",        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "tdm", "int0",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "ref-clk",    V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x5, "vdd", "cpu0-pd",    V_MV78230_PLUS)),
+	MPP_MODE(30,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "sd0", "clk",        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "tdm", "int1",       V_MV78230_PLUS)),
+	MPP_MODE(31,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "sd0", "cmd",        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "tdm", "int2",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x5, "vdd", "cpu0-pd",    V_MV78230_PLUS)),
+	MPP_MODE(32,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "sd0", "d0",         V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "tdm", "int3",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x5, "vdd", "cpu1-pd",    V_MV78230_PLUS)),
+	MPP_MODE(33,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "sd0", "d1",         V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "tdm", "int4",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "mem", "bat",        V_MV78230_PLUS)),
+	MPP_MODE(34,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "sd0", "d2",         V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "sata0", "prsnt",    V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "tdm", "int5",       V_MV78230_PLUS)),
+	MPP_MODE(35,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "sd0", "d3",         V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "sata1", "prsnt",    V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "tdm", "int6",       V_MV78230_PLUS)),
+	MPP_MODE(36,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "spi", "mosi",       V_MV78230_PLUS)),
+	MPP_MODE(37,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "spi", "miso",       V_MV78230_PLUS)),
+	MPP_MODE(38,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "spi", "sck",        V_MV78230_PLUS)),
+	MPP_MODE(39,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "spi", "cs0",        V_MV78230_PLUS)),
+	MPP_MODE(40,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "spi", "cs1",        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "uart2", "cts",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "vdd", "cpu1-pd",    V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "vga-hsync",  V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x5, "pcie", "clkreq0",   V_MV78230_PLUS)),
+	MPP_MODE(41,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "spi", "cs2",        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "uart2", "rts",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "sata1", "prsnt",    V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "vga-vsync",  V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x5, "pcie", "clkreq1",   V_MV78230_PLUS)),
+	MPP_MODE(42,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "uart2", "rxd",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "uart0", "cts",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "tdm", "int7",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "tdm-1", "timer",    V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x5, "vdd", "cpu0-pd",    V_MV78230_PLUS)),
+	MPP_MODE(43,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "uart2", "txd",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "uart0", "rts",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "spi", "cs3",        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "pcie", "rstout",    V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x5, "vdd", "cpu2-3-pd",  V_MV78460)),
+	MPP_MODE(44,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "uart2", "cts",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "uart3", "rxd",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "spi", "cs4",        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "mem", "bat",        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x5, "pcie", "clkreq2",   V_MV78230_PLUS)),
+	MPP_MODE(45,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "uart2", "rts",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "uart3", "txd",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "spi", "cs5",        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "sata1", "prsnt",    V_MV78230_PLUS)),
+	MPP_MODE(46,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "uart3", "rts",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "uart1", "rts",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "spi", "cs6",        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "sata0", "prsnt",    V_MV78230_PLUS)),
+	MPP_MODE(47,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "uart3", "cts",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "uart1", "cts",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "spi", "cs7",        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "ref", "clkout",     V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x5, "pcie", "clkreq3",   V_MV78230_PLUS)),
+	MPP_MODE(48,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "tclk", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "dev", "burst/last", V_MV78230_PLUS)),
+	MPP_MODE(49,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78260_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "dev", "we3",        V_MV78260_PLUS)),
+	MPP_MODE(50,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78260_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "dev", "we2",        V_MV78260_PLUS)),
+	MPP_MODE(51,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78260_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "dev", "ad16",       V_MV78260_PLUS)),
+	MPP_MODE(52,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78260_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "dev", "ad17",       V_MV78260_PLUS)),
+	MPP_MODE(53,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78260_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "dev", "ad18",       V_MV78260_PLUS)),
+	MPP_MODE(54,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78260_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "dev", "ad19",       V_MV78260_PLUS)),
+	MPP_MODE(55,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78260_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "dev", "ad20",       V_MV78260_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "vdd", "cpu0-pd",    V_MV78260_PLUS)),
+	MPP_MODE(56,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78260_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "dev", "ad21",       V_MV78260_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "vdd", "cpu1-pd",    V_MV78260_PLUS)),
+	MPP_MODE(57,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78260_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "dev", "ad22",       V_MV78260_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "vdd", "cpu2-3-pd",  V_MV78460)),
+	MPP_MODE(58,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78260_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "dev", "ad23",       V_MV78260_PLUS)),
+	MPP_MODE(59,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78260_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "dev", "ad24",       V_MV78260_PLUS)),
+	MPP_MODE(60,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78260_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "dev", "ad25",       V_MV78260_PLUS)),
+	MPP_MODE(61,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78260_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "dev", "ad26",       V_MV78260_PLUS)),
+	MPP_MODE(62,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78260_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "dev", "ad27",       V_MV78260_PLUS)),
+	MPP_MODE(63,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78260_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "dev", "ad28",       V_MV78260_PLUS)),
+	MPP_MODE(64,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78260_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "dev", "ad29",       V_MV78260_PLUS)),
+	MPP_MODE(65,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78260_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "dev", "ad30",       V_MV78260_PLUS)),
+	MPP_MODE(66,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78260_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "dev", "ad31",       V_MV78260_PLUS)),
+};
+
+static struct mvebu_pinctrl_soc_info armada_xp_pinctrl_info;
+
+static struct of_device_id armada_xp_pinctrl_of_match[] __devinitdata = {
+	{
+		.compatible = "marvell,mv78230-pinctrl",
+		.data       = (void *) V_MV78230,
+	},
+	{
+		.compatible = "marvell,mv78260-pinctrl",
+		.data       = (void *) V_MV78260,
+	},
+	{
+		.compatible = "marvell,mv78460-pinctrl",
+		.data       = (void *) V_MV78460,
+	},
+	{ },
+};
+
+static struct mvebu_mpp_ctrl mv78230_mpp_controls[] = {
+	MPP_REG_CTRL(0, 48),
+};
+
+static struct pinctrl_gpio_range mv78230_mpp_gpio_ranges[] = {
+	MPP_GPIO_RANGE(0,   0,  0, 32),
+	MPP_GPIO_RANGE(1,  32, 32, 17),
+};
+
+static struct mvebu_mpp_ctrl mv78260_mpp_controls[] = {
+	MPP_REG_CTRL(0, 66),
+};
+
+static struct pinctrl_gpio_range mv78260_mpp_gpio_ranges[] = {
+	MPP_GPIO_RANGE(0,   0,  0, 32),
+	MPP_GPIO_RANGE(1,  32, 32, 32),
+	MPP_GPIO_RANGE(2,  64, 64,  3),
+};
+
+static struct mvebu_mpp_ctrl mv78460_mpp_controls[] = {
+	MPP_REG_CTRL(0, 66),
+};
+
+static struct pinctrl_gpio_range mv78460_mpp_gpio_ranges[] = {
+	MPP_GPIO_RANGE(0,   0,  0, 32),
+	MPP_GPIO_RANGE(1,  32, 32, 32),
+	MPP_GPIO_RANGE(2,  64, 64,  3),
+};
+
+static int __devinit armada_xp_pinctrl_probe(struct platform_device *pdev)
+{
+	struct mvebu_pinctrl_soc_info *soc = &armada_xp_pinctrl_info;
+	const struct of_device_id *match =
+		of_match_device(armada_xp_pinctrl_of_match, &pdev->dev);
+
+	if (!match)
+		return -ENODEV;
+
+	soc->variant = (unsigned) match->data & 0xff;
+
+	switch (soc->variant) {
+	case V_MV78230:
+		soc->controls = mv78230_mpp_controls;
+		soc->ncontrols = ARRAY_SIZE(mv78230_mpp_controls);
+		soc->modes = armada_xp_mpp_modes;
+		/* We don't necessarily want the full list of the
+		 * armada_xp_mpp_modes, but only the first 'n' ones
+		 * that are available on this SoC */
+		soc->nmodes = mv78230_mpp_controls[0].npins;
+		soc->gpioranges = mv78230_mpp_gpio_ranges;
+		soc->ngpioranges = ARRAY_SIZE(mv78230_mpp_gpio_ranges);
+		break;
+	case V_MV78260:
+		soc->controls = mv78260_mpp_controls;
+		soc->ncontrols = ARRAY_SIZE(mv78260_mpp_controls);
+		soc->modes = armada_xp_mpp_modes;
+		/* We don't necessarily want the full list of the
+		 * armada_xp_mpp_modes, but only the first 'n' ones
+		 * that are available on this SoC */
+		soc->nmodes = mv78260_mpp_controls[0].npins;
+		soc->gpioranges = mv78260_mpp_gpio_ranges;
+		soc->ngpioranges = ARRAY_SIZE(mv78260_mpp_gpio_ranges);
+		break;
+	case V_MV78460:
+		soc->controls = mv78460_mpp_controls;
+		soc->ncontrols = ARRAY_SIZE(mv78460_mpp_controls);
+		soc->modes = armada_xp_mpp_modes;
+		/* We don't necessarily want the full list of the
+		 * armada_xp_mpp_modes, but only the first 'n' ones
+		 * that are available on this SoC */
+		soc->nmodes = mv78460_mpp_controls[0].npins;
+		soc->gpioranges = mv78460_mpp_gpio_ranges;
+		soc->ngpioranges = ARRAY_SIZE(mv78460_mpp_gpio_ranges);
+		break;
+	}
+
+	pdev->dev.platform_data = soc;
+
+	return mvebu_pinctrl_probe(pdev);
+}
+
+static int __devexit armada_xp_pinctrl_remove(struct platform_device *pdev)
+{
+	return mvebu_pinctrl_remove(pdev);
+}
+
+static struct platform_driver armada_xp_pinctrl_driver = {
+	.driver = {
+		.name = "armada-xp-pinctrl",
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(armada_xp_pinctrl_of_match),
+	},
+	.probe = armada_xp_pinctrl_probe,
+	.remove = __devexit_p(armada_xp_pinctrl_remove),
+};
+
+module_platform_driver(armada_xp_pinctrl_driver);
+
+MODULE_AUTHOR("Thomas Petazzoni <thomas.petazzoni@free-electrons.com>");
+MODULE_DESCRIPTION("Marvell Armada XP pinctrl driver");
+MODULE_LICENSE("GPL v2");
-- 
1.7.10.4

[PATCH 07/11] ARM: mvebu: Add pinctrl support to Armada XP SoCs

From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: 2012-08-11 12:57:51

From: Thomas Petazzoni <redacted>

This commits adds the necessary device tree information to define the
compatible property for the pinctrl driver instance of Armada XP SoCs.

Until now, the device tree representation considered the Armada XP as
a single SoC. But in fact, there are three different SoCs in the
Armada XP families, with different number of CPU cores, different
number of Ethernet interfaces... and different number of muxable pins
or functions. We therefore introduce three armada-xp-mv78xx0.dtsi for
the three SoCs of the Armada XP family. The current armada-xp-db.dts
evaluation board uses the MV78460 variant of the SoC.

Signed-off-by: Thomas Petazzoni <redacted>
---
Cc: Grant Likely <redacted>
Cc: Rob Herring <redacted>
Cc: Rob Landley <redacted>
Cc: Russell King <redacted>
Cc: Linus Walleij <redacted>
Cc: Lior Amsalem <redacted>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory CLEMENT <redacted>
Cc: Ben Dooks <redacted>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Thomas Petazzoni <redacted>
Cc: devicetree-discuss at lists.ozlabs.org
Cc: linux-doc at vger.kernel.org
Cc: linux-kernel at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
---
 arch/arm/boot/dts/armada-xp-mv78230.dtsi |   27 +++++++++++++++++++++++++++
 arch/arm/boot/dts/armada-xp-mv78260.dtsi |   27 +++++++++++++++++++++++++++
 arch/arm/boot/dts/armada-xp-mv78460.dtsi |   27 +++++++++++++++++++++++++++
 3 files changed, 81 insertions(+)
 create mode 100644 arch/arm/boot/dts/armada-xp-mv78230.dtsi
 create mode 100644 arch/arm/boot/dts/armada-xp-mv78260.dtsi
 create mode 100644 arch/arm/boot/dts/armada-xp-mv78460.dtsi
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
new file mode 100644
index 0000000..69ad287
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -0,0 +1,27 @@
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Contains definitions specific to the Armada XP MV78230 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+/include/ "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP family SoC";
+	compatible = "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	soc {
+		pinctrl at d0018000 {
+			compatible = "marvell,mv78230-pinctrl";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
new file mode 100644
index 0000000..0f38fa9
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -0,0 +1,27 @@
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Contains definitions specific to the Armada XP MV78260 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+/include/ "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP family SoC";
+	compatible = "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	soc {
+		pinctrl at d0018000 {
+			compatible = "marvell,mv78260-pinctrl";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
new file mode 100644
index 0000000..9e61836
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -0,0 +1,27 @@
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Contains definitions specific to the Armada XP MV78460 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+/include/ "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP family SoC";
+	compatible = "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	soc {
+		pinctrl at d0018000 {
+			compatible = "marvell,mv78460-pinctrl";
+		};
+	};
+ };
-- 
1.7.10.4

[PATCH 08/11] ARM: mvebu: Add pinctrl support to Armada 370 SoC

From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: 2012-08-11 12:57:55

From: Thomas Petazzoni <redacted>

This commits adds the necessary device tree information to define the
compatible property for the pinctrl driver instance of Armada 370 SoC.

Signed-off-by: Thomas Petazzoni <redacted>
---
Cc: Grant Likely <redacted>
Cc: Rob Herring <redacted>
Cc: Rob Landley <redacted>
Cc: Russell King <redacted>
Cc: Linus Walleij <redacted>
Cc: Lior Amsalem <redacted>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory CLEMENT <redacted>
Cc: Ben Dooks <redacted>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Thomas Petazzoni <redacted>
Cc: devicetree-discuss at lists.ozlabs.org
Cc: linux-doc at vger.kernel.org
Cc: linux-kernel at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
---
 arch/arm/boot/dts/armada-370.dtsi |    4 ++++
 1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 3228ccc..875fcd8 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -31,5 +31,9 @@
 				compatible = "marvell,armada-370-xp-system-controller";
 				reg = <0xd0018200 0x100>;
 		};
+
+                pinctrl at d0018000 {
+			        compatible = "marvell,mv88f6710-pinctrl";
+	        };
 	};
 };
-- 
1.7.10.4

[PATCH 04/11] pinctrl: mvebu: add pinctrl driver for Armada 370

From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: 2012-08-11 12:57:57

From: Thomas Petazzoni <redacted>

This pinctrl driver is not a full-blown pinctrl driver from scratch:
it relies on the common pinctrl-mvebu driver, which is used for all
Marvell EBU SoCs.

Signed-off-by: Thomas Petazzoni <redacted>
---
Cc: Grant Likely <redacted>
Cc: Rob Herring <redacted>
Cc: Rob Landley <redacted>
Cc: Russell King <redacted>
Cc: Linus Walleij <redacted>
Cc: Lior Amsalem <redacted>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory CLEMENT <redacted>
Cc: Ben Dooks <redacted>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Thomas Petazzoni <redacted>
Cc: devicetree-discuss at lists.ozlabs.org
Cc: linux-doc at vger.kernel.org
Cc: linux-kernel at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
---
 .../pinctrl/marvell,armada-370-pinctrl.txt         |   95 +++++
 drivers/pinctrl/Kconfig                            |    5 +
 drivers/pinctrl/Makefile                           |    1 +
 drivers/pinctrl/pinctrl-armada-370.c               |  421 ++++++++++++++++++++
 4 files changed, 522 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt
 create mode 100644 drivers/pinctrl/pinctrl-armada-370.c
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt
new file mode 100644
index 0000000..01ef408
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt
@@ -0,0 +1,95 @@
+* Marvell Armada 370 SoC pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "marvell,88f6710-pinctrl"
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, uart0(rxd)
+mpp1          1        gpo, uart0(txd)
+mpp2          2        gpio, i2c0(sck), uart0(txd)
+mpp3          3        gpio, i2c0(sda), uart0(rxd)
+mpp4          4        gpio, cpu_pd(vdd)
+mpp5          5        gpo, ge0(txclko), uart1(txd), spi1(clk), audio(mclk)
+mpp6          6        gpio, ge0(txd0), sata0(prsnt), tdm(rst), audio(sdo)
+mpp7          7        gpo, ge0(txd1), tdm(tdx), audio(lrclk)
+mpp8          8        gpio, ge0(txd2), uart0(rts), tdm(drx), audio(bclk)
+mpp9          9        gpo, ge0(txd3), uart1(txd), sd0(clk), audio(spdifo)
+mpp10         10       gpio, ge0(txctl), uart0(cts), tdm(fsync), audio(sdi)
+mpp11         11       gpio, ge0(rxd0), uart1(rxd), sd0(cmd), spi0(cs1),
+                       sata1(prsnt), spi1(cs1)
+mpp12         12       gpio, ge0(rxd1), i2c1(sda), sd0(d0), spi1(cs0),
+                       audio(spdifi)
+mpp13         13       gpio, ge0(rxd2), i2c1(sck), sd0(d1), tdm(pclk),
+                       audio(rmclk)
+mpp14         14       gpio, ge0(rxd3), pcie(clkreq0), sd0(d2), spi1(mosi),
+                       spi0(cs2)
+mpp15         15       gpio, ge0(rxctl), pcie(clkreq1), sd0(d3), spi1(miso),
+                       spi0(cs3)
+mpp16         16       gpio, ge0(rxclk), uart1(rxd), tdm(int), audio(extclk)
+mpp17         17       gpo, ge(mdc)
+mpp18         18       gpio, ge(mdio)
+mpp19         19       gpio, ge0(txclk), ge1(txclkout), tdm(pclk)
+mpp20         20       gpo, ge0(txd4), ge1(txd0)
+mpp21         21       gpo, ge0(txd5), ge1(txd1), uart1(txd)
+mpp22         22       gpo, ge0(txd6), ge1(txd2), uart0(rts)
+mpp23         23       gpo, ge0(txd7), ge1(txd3), spi1(mosi)
+mpp24         24       gpio, ge0(col), ge1(txctl), spi1(cs0)
+mpp25         25       gpio, ge0(rxerr), ge1(rxd0), uart1(rxd)
+mpp26         26       gpio, ge0(crs), ge1(rxd1), spi1(miso)
+mpp27         27       gpio, ge0(rxd4), ge1(rxd2), uart0(cts)
+mpp28         28       gpio, ge0(rxd5), ge1(rxd3)
+mpp29         29       gpio, ge0(rxd6), ge1(rxctl), i2c1(sda)
+mpp30         30       gpio, ge0(rxd7), ge1(rxclk), i2c1(sck)
+mpp31         31       gpio, tclk, ge0(txerr)
+mpp32         32       gpio, spi0(cs0)
+mpp33         33       gpio, dev(bootcs), spi0(cs0)
+mpp34         34       gpo, dev(wen0), spi0(mosi)
+mpp35         35       gpo, dev(oen), spi0(sck)
+mpp36         36       gpo, dev(a1), spi0(miso)
+mpp37         37       gpo, dev(a0), sata0(prsnt)
+mpp38         38       gpio, dev(ready), uart1(cts), uart0(cts)
+mpp39         39       gpo, dev(ad0), audio(spdifo)
+mpp40         40       gpio, dev(ad1), uart1(rts), uart0(rts)
+mpp41         41       gpio, dev(ad2), uart1(rxd)
+mpp42         42       gpo, dev(ad3), uart1(txd)
+mpp43         43       gpo, dev(ad4), audio(bclk)
+mpp44         44       gpo, dev(ad5), audio(mclk)
+mpp45         45       gpo, dev(ad6), audio(lrclk)
+mpp46         46       gpo, dev(ad7), audio(sdo)
+mpp47         47       gpo, dev(ad8), sd0(clk), audio(spdifo)
+mpp48         48       gpio, dev(ad9), uart0(rts), sd0(cmd), sata1(prsnt),
+                       spi0(cs1)
+mpp49         49       gpio, dev(ad10), pcie(clkreq1), sd0(d0), spi1(cs0),
+                       audio(spdifi)
+mpp50         50       gpio, dev(ad11), uart0(cts), sd0(d1), spi1(miso),
+                       audio(rmclk)
+mpp51         51       gpio, dev(ad12), i2c1(sda), sd0(d2), spi1(mosi)
+mpp52         52       gpio, dev(ad13), i2c1(sck), sd0(d3), spi1(sck)
+mpp53         53       gpio, dev(ad14), sd0(clk), tdm(pclk), spi0(cs2),
+                       pcie(clkreq1)
+mpp54         54       gpo, dev(ad15), tdm(dtx)
+mpp55         55       gpio, dev(cs1), uart1(txd), tdm(rst), sata1(prsnt),
+                       sata0(prsnt)
+mpp56         56       gpio, dev(cs2), uart1(cts), uart0(cts), spi0(cs3),
+                       pcie(clkreq0), spi1(cs1)
+mpp57         57       gpio, dev(cs3), uart1(rxd), tdm(fsync), sata0(prsnt),
+                       audio(sdo)
+mpp58         58       gpio, dev(cs0), uart1(rts), tdm(int), audio(extclk),
+                       uart0(rts)
+mpp59         59       gpo, dev(ale0), uart1(rts), uart0(rts), audio(bclk)
+mpp60         60       gpio, dev(ale1), uart1(rxd), sata0(prsnt), pcie(rst-out),
+                       audio(sdi)
+mpp61         61       gpo, dev(wen1), uart1(txd), audio(rclk)
+mpp62         62       gpio, dev(a2), uart1(cts), tdm(drx), pcie(clkreq0),
+                       audio(mclk), uart0(cts)
+mpp63         63       gpo, spi0(sck), tclk
+mpp64         64       gpio, spi0(miso), spi0-1(cs1)
+mpp65         65       gpio, spi0(mosi), spi0-1(cs2)
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 1f84090..caa97cc 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -169,6 +169,11 @@ config PINCTRL_KIRKWOOD
 	  Say yes here to support pinctrl driver on Marvell Kirkwood SoCs
 	  (88f6180, 88f6190, 88f6192, 88f6281, 88f6282).
 
+config PINCTRL_ARMADA_370
+	bool "Support for Marvell Armada 370 SoCs"
+	depends on PINCTRL_MVEBU
+	depends on MACH_ARMADA_370_XP
+
 source "drivers/pinctrl/spear/Kconfig"
 
 endmenu
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 3006294..e6d6667 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -32,5 +32,6 @@ obj-$(CONFIG_PINCTRL_COH901)	+= pinctrl-coh901.o
 obj-$(CONFIG_PINCTRL_MVEBU)	+= pinctrl-mvebu.o
 obj-$(CONFIG_PINCTRL_DOVE)	+= pinctrl-dove.o
 obj-$(CONFIG_PINCTRL_KIRKWOOD)	+= pinctrl-kirkwood.o
+obj-$(CONFIG_PINCTRL_ARMADA_370) += pinctrl-armada-370.o
 
 obj-$(CONFIG_PLAT_SPEAR)	+= spear/
diff --git a/drivers/pinctrl/pinctrl-armada-370.c b/drivers/pinctrl/pinctrl-armada-370.c
new file mode 100644
index 0000000..b48f472
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-armada-370.c
@@ -0,0 +1,421 @@
+/*
+ * Marvell Armada 370 pinctrl driver based on mvebu pinctrl core
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-mvebu.h"
+
+static struct mvebu_mpp_mode mv88f6710_mpp_modes[] = {
+	MPP_MODE(0,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "uart0", "rxd")),
+	MPP_MODE(1,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "uart0", "txd")),
+	MPP_MODE(2,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "i2c0", "sck"),
+	   MPP_FUNCTION(0x2, "uart0", "txd")),
+	MPP_MODE(3,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "i2c0", "sda"),
+	   MPP_FUNCTION(0x2, "uart0", "rxd")),
+	MPP_MODE(4,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "cpu_pd", "vdd")),
+	MPP_MODE(5,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "txclko"),
+	   MPP_FUNCTION(0x2, "uart1", "txd"),
+	   MPP_FUNCTION(0x4, "spi1", "clk"),
+	   MPP_FUNCTION(0x5, "audio", "mclk")),
+	MPP_MODE(6,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "txd0"),
+	   MPP_FUNCTION(0x2, "sata0", "prsnt"),
+	   MPP_FUNCTION(0x4, "tdm", "rst"),
+	   MPP_FUNCTION(0x5, "audio", "sdo")),
+	MPP_MODE(7,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "txd1"),
+	   MPP_FUNCTION(0x4, "tdm", "tdx"),
+	   MPP_FUNCTION(0x5, "audio", "lrclk")),
+	MPP_MODE(8,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "txd2"),
+	   MPP_FUNCTION(0x2, "uart0", "rts"),
+	   MPP_FUNCTION(0x4, "tdm", "drx"),
+	   MPP_FUNCTION(0x5, "audio", "bclk")),
+	MPP_MODE(9,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "txd3"),
+	   MPP_FUNCTION(0x2, "uart1", "txd"),
+	   MPP_FUNCTION(0x3, "sd0", "clk"),
+	   MPP_FUNCTION(0x5, "audio", "spdifo")),
+	MPP_MODE(10,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "txctl"),
+	   MPP_FUNCTION(0x2, "uart0", "cts"),
+	   MPP_FUNCTION(0x4, "tdm", "fsync"),
+	   MPP_FUNCTION(0x5, "audio", "sdi")),
+	MPP_MODE(11,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "rxd0"),
+	   MPP_FUNCTION(0x2, "uart1", "rxd"),
+	   MPP_FUNCTION(0x3, "sd0", "cmd"),
+	   MPP_FUNCTION(0x4, "spi0", "cs1"),
+	   MPP_FUNCTION(0x5, "sata1", "prsnt"),
+	   MPP_FUNCTION(0x6, "spi1", "cs1")),
+	MPP_MODE(12,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "rxd1"),
+	   MPP_FUNCTION(0x2, "i2c1", "sda"),
+	   MPP_FUNCTION(0x3, "sd0", "d0"),
+	   MPP_FUNCTION(0x4, "spi1", "cs0"),
+	   MPP_FUNCTION(0x5, "audio", "spdifi")),
+	MPP_MODE(13,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "rxd2"),
+	   MPP_FUNCTION(0x2, "i2c1", "sck"),
+	   MPP_FUNCTION(0x3, "sd0", "d1"),
+	   MPP_FUNCTION(0x4, "tdm", "pclk"),
+	   MPP_FUNCTION(0x5, "audio", "rmclk")),
+	MPP_MODE(14,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "rxd3"),
+	   MPP_FUNCTION(0x2, "pcie", "clkreq0"),
+	   MPP_FUNCTION(0x3, "sd0", "d2"),
+	   MPP_FUNCTION(0x4, "spi1", "mosi"),
+	   MPP_FUNCTION(0x5, "spi0", "cs2")),
+	MPP_MODE(15,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "rxctl"),
+	   MPP_FUNCTION(0x2, "pcie", "clkreq1"),
+	   MPP_FUNCTION(0x3, "sd0", "d3"),
+	   MPP_FUNCTION(0x4, "spi1", "miso"),
+	   MPP_FUNCTION(0x5, "spi0", "cs3")),
+	MPP_MODE(16,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "rxclk"),
+	   MPP_FUNCTION(0x2, "uart1", "rxd"),
+	   MPP_FUNCTION(0x4, "tdm", "int"),
+	   MPP_FUNCTION(0x5, "audio", "extclk")),
+	MPP_MODE(17,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "ge", "mdc")),
+	MPP_MODE(18,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge", "mdio")),
+	MPP_MODE(19,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "txclk"),
+	   MPP_FUNCTION(0x2, "ge1", "txclkout"),
+	   MPP_FUNCTION(0x4, "tdm", "pclk")),
+	MPP_MODE(20,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "txd4"),
+	   MPP_FUNCTION(0x2, "ge1", "txd0")),
+	MPP_MODE(21,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "txd5"),
+	   MPP_FUNCTION(0x2, "ge1", "txd1"),
+	   MPP_FUNCTION(0x4, "uart1", "txd")),
+	MPP_MODE(22,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "txd6"),
+	   MPP_FUNCTION(0x2, "ge1", "txd2"),
+	   MPP_FUNCTION(0x4, "uart0", "rts")),
+	MPP_MODE(23,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "txd7"),
+	   MPP_FUNCTION(0x2, "ge1", "txd3"),
+	   MPP_FUNCTION(0x4, "spi1", "mosi")),
+	MPP_MODE(24,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "col"),
+	   MPP_FUNCTION(0x2, "ge1", "txctl"),
+	   MPP_FUNCTION(0x4, "spi1", "cs0")),
+	MPP_MODE(25,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "rxerr"),
+	   MPP_FUNCTION(0x2, "ge1", "rxd0"),
+	   MPP_FUNCTION(0x4, "uart1", "rxd")),
+	MPP_MODE(26,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "crs"),
+	   MPP_FUNCTION(0x2, "ge1", "rxd1"),
+	   MPP_FUNCTION(0x4, "spi1", "miso")),
+	MPP_MODE(27,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "rxd4"),
+	   MPP_FUNCTION(0x2, "ge1", "rxd2"),
+	   MPP_FUNCTION(0x4, "uart0", "cts")),
+	MPP_MODE(28,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "rxd5"),
+	   MPP_FUNCTION(0x2, "ge1", "rxd3")),
+	MPP_MODE(29,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "rxd6"),
+	   MPP_FUNCTION(0x2, "ge1", "rxctl"),
+	   MPP_FUNCTION(0x4, "i2c1", "sda")),
+	MPP_MODE(30,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "rxd7"),
+	   MPP_FUNCTION(0x2, "ge1", "rxclk"),
+	   MPP_FUNCTION(0x4, "i2c1", "sck")),
+	MPP_MODE(31,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x3, "tclk", NULL),
+	   MPP_FUNCTION(0x4, "ge0", "txerr")),
+	MPP_MODE(32,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "spi0", "cs0")),
+	MPP_MODE(33,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "bootcs"),
+	   MPP_FUNCTION(0x2, "spi0", "cs0")),
+	MPP_MODE(34,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "dev", "wen0"),
+	   MPP_FUNCTION(0x2, "spi0", "mosi")),
+	MPP_MODE(35,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "dev", "oen"),
+	   MPP_FUNCTION(0x2, "spi0", "sck")),
+	MPP_MODE(36,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "dev", "a1"),
+	   MPP_FUNCTION(0x2, "spi0", "miso")),
+	MPP_MODE(37,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "dev", "a0"),
+	   MPP_FUNCTION(0x2, "sata0", "prsnt")),
+	MPP_MODE(38,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ready"),
+	   MPP_FUNCTION(0x2, "uart1", "cts"),
+	   MPP_FUNCTION(0x3, "uart0", "cts")),
+	MPP_MODE(39,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad0"),
+	   MPP_FUNCTION(0x2, "audio", "spdifo")),
+	MPP_MODE(40,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad1"),
+	   MPP_FUNCTION(0x2, "uart1", "rts"),
+	   MPP_FUNCTION(0x3, "uart0", "rts")),
+	MPP_MODE(41,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad2"),
+	   MPP_FUNCTION(0x2, "uart1", "rxd")),
+	MPP_MODE(42,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad3"),
+	   MPP_FUNCTION(0x2, "uart1", "txd")),
+	MPP_MODE(43,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad4"),
+	   MPP_FUNCTION(0x2, "audio", "bclk")),
+	MPP_MODE(44,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad5"),
+	   MPP_FUNCTION(0x2, "audio", "mclk")),
+	MPP_MODE(45,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad6"),
+	   MPP_FUNCTION(0x2, "audio", "lrclk")),
+	MPP_MODE(46,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad7"),
+	   MPP_FUNCTION(0x2, "audio", "sdo")),
+	MPP_MODE(47,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad8"),
+	   MPP_FUNCTION(0x3, "sd0", "clk"),
+	   MPP_FUNCTION(0x5, "audio", "spdifo")),
+	MPP_MODE(48,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad9"),
+	   MPP_FUNCTION(0x2, "uart0", "rts"),
+	   MPP_FUNCTION(0x3, "sd0", "cmd"),
+	   MPP_FUNCTION(0x4, "sata1", "prsnt"),
+	   MPP_FUNCTION(0x5, "spi0", "cs1")),
+	MPP_MODE(49,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad10"),
+	   MPP_FUNCTION(0x2, "pcie", "clkreq1"),
+	   MPP_FUNCTION(0x3, "sd0", "d0"),
+	   MPP_FUNCTION(0x4, "spi1", "cs0"),
+	   MPP_FUNCTION(0x5, "audio", "spdifi")),
+	MPP_MODE(50,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad11"),
+	   MPP_FUNCTION(0x2, "uart0", "cts"),
+	   MPP_FUNCTION(0x3, "sd0", "d1"),
+	   MPP_FUNCTION(0x4, "spi1", "miso"),
+	   MPP_FUNCTION(0x5, "audio", "rmclk")),
+	MPP_MODE(51,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad12"),
+	   MPP_FUNCTION(0x2, "i2c1", "sda"),
+	   MPP_FUNCTION(0x3, "sd0", "d2"),
+	   MPP_FUNCTION(0x4, "spi1", "mosi")),
+	MPP_MODE(52,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad13"),
+	   MPP_FUNCTION(0x2, "i2c1", "sck"),
+	   MPP_FUNCTION(0x3, "sd0", "d3"),
+	   MPP_FUNCTION(0x4, "spi1", "sck")),
+	MPP_MODE(53,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad14"),
+	   MPP_FUNCTION(0x2, "sd0", "clk"),
+	   MPP_FUNCTION(0x3, "tdm", "pclk"),
+	   MPP_FUNCTION(0x4, "spi0", "cs2"),
+	   MPP_FUNCTION(0x5, "pcie", "clkreq1")),
+	MPP_MODE(54,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad15"),
+	   MPP_FUNCTION(0x3, "tdm", "dtx")),
+	MPP_MODE(55,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "cs1"),
+	   MPP_FUNCTION(0x2, "uart1", "txd"),
+	   MPP_FUNCTION(0x3, "tdm", "rst"),
+	   MPP_FUNCTION(0x4, "sata1", "prsnt"),
+	   MPP_FUNCTION(0x5, "sata0", "prsnt")),
+	MPP_MODE(56,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "cs2"),
+	   MPP_FUNCTION(0x2, "uart1", "cts"),
+	   MPP_FUNCTION(0x3, "uart0", "cts"),
+	   MPP_FUNCTION(0x4, "spi0", "cs3"),
+	   MPP_FUNCTION(0x5, "pcie", "clkreq0"),
+	   MPP_FUNCTION(0x6, "spi1", "cs1")),
+	MPP_MODE(57,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "cs3"),
+	   MPP_FUNCTION(0x2, "uart1", "rxd"),
+	   MPP_FUNCTION(0x3, "tdm", "fsync"),
+	   MPP_FUNCTION(0x4, "sata0", "prsnt"),
+	   MPP_FUNCTION(0x5, "audio", "sdo")),
+	MPP_MODE(58,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "cs0"),
+	   MPP_FUNCTION(0x2, "uart1", "rts"),
+	   MPP_FUNCTION(0x3, "tdm", "int"),
+	   MPP_FUNCTION(0x5, "audio", "extclk"),
+	   MPP_FUNCTION(0x6, "uart0", "rts")),
+	MPP_MODE(59,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ale0"),
+	   MPP_FUNCTION(0x2, "uart1", "rts"),
+	   MPP_FUNCTION(0x3, "uart0", "rts"),
+	   MPP_FUNCTION(0x5, "audio", "bclk")),
+	MPP_MODE(60,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ale1"),
+	   MPP_FUNCTION(0x2, "uart1", "rxd"),
+	   MPP_FUNCTION(0x3, "sata0", "prsnt"),
+	   MPP_FUNCTION(0x4, "pcie", "rst-out"),
+	   MPP_FUNCTION(0x5, "audio", "sdi")),
+	MPP_MODE(61,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "dev", "wen1"),
+	   MPP_FUNCTION(0x2, "uart1", "txd"),
+	   MPP_FUNCTION(0x5, "audio", "rclk")),
+	MPP_MODE(62,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "a2"),
+	   MPP_FUNCTION(0x2, "uart1", "cts"),
+	   MPP_FUNCTION(0x3, "tdm", "drx"),
+	   MPP_FUNCTION(0x4, "pcie", "clkreq0"),
+	   MPP_FUNCTION(0x5, "audio", "mclk"),
+	   MPP_FUNCTION(0x6, "uart0", "cts")),
+	MPP_MODE(63,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "spi0", "sck"),
+	   MPP_FUNCTION(0x2, "tclk", NULL)),
+	MPP_MODE(64,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "spi0", "miso"),
+	   MPP_FUNCTION(0x2, "spi0-1", "cs1")),
+	MPP_MODE(65,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "spi0", "mosi"),
+	   MPP_FUNCTION(0x2, "spi0-1", "cs2")),
+};
+
+static struct mvebu_pinctrl_soc_info armada_370_pinctrl_info;
+
+static struct of_device_id armada_370_pinctrl_of_match[] __devinitdata = {
+	{ .compatible = "marvell,mv88f6710-pinctrl" },
+	{ },
+};
+
+static struct mvebu_mpp_ctrl mv88f6710_mpp_controls[] = {
+	MPP_REG_CTRL(0, 65),
+};
+
+static struct pinctrl_gpio_range mv88f6710_mpp_gpio_ranges[] = {
+	MPP_GPIO_RANGE(0,   0,  0, 32),
+	MPP_GPIO_RANGE(1,  32, 32, 32),
+	MPP_GPIO_RANGE(2,  64, 64,  2),
+};
+
+static int __devinit armada_370_pinctrl_probe(struct platform_device *pdev)
+{
+	struct mvebu_pinctrl_soc_info *soc = &armada_370_pinctrl_info;
+
+	soc->variant = 0;
+	soc->controls = mv88f6710_mpp_controls;
+	soc->ncontrols = ARRAY_SIZE(mv88f6710_mpp_controls);
+	soc->modes = mv88f6710_mpp_modes;
+	soc->nmodes = ARRAY_SIZE(mv88f6710_mpp_modes);
+	soc->gpioranges = mv88f6710_mpp_gpio_ranges;
+	soc->ngpioranges = ARRAY_SIZE(mv88f6710_mpp_gpio_ranges);
+
+	pdev->dev.platform_data = soc;
+
+	return mvebu_pinctrl_probe(pdev);
+}
+
+static int __devexit armada_370_pinctrl_remove(struct platform_device *pdev)
+{
+	return mvebu_pinctrl_remove(pdev);
+}
+
+static struct platform_driver armada_370_pinctrl_driver = {
+	.driver = {
+		.name = "armada-370-pinctrl",
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(armada_370_pinctrl_of_match),
+	},
+	.probe = armada_370_pinctrl_probe,
+	.remove = __devexit_p(armada_370_pinctrl_remove),
+};
+
+module_platform_driver(armada_370_pinctrl_driver);
+
+MODULE_AUTHOR("Thomas Petazzoni <thomas.petazzoni@free-electrons.com>");
+MODULE_DESCRIPTION("Marvell Armada 370 pinctrl driver");
+MODULE_LICENSE("GPL v2");
-- 
1.7.10.4

[PATCH 09/11] ARM: mvebu: adjust Armada XP evaluation board DTS

From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: 2012-08-11 12:58:02

From: Thomas Petazzoni <redacted>

The Armada XP evaluation board is based on the MV78460 Armava XP
SoC. Now that we have separate .dtsi files for the three different
SoCs of the Armada XP family, use the appropriate one as include for
the Armada XP evaluation board .dts file.

Signed-off-by: Thomas Petazzoni <redacted>
---
Cc: Grant Likely <redacted>
Cc: Rob Herring <redacted>
Cc: Rob Landley <redacted>
Cc: Russell King <redacted>
Cc: Linus Walleij <redacted>
Cc: Lior Amsalem <redacted>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory CLEMENT <redacted>
Cc: Ben Dooks <redacted>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Thomas Petazzoni <redacted>
Cc: devicetree-discuss at lists.ozlabs.org
Cc: linux-doc at vger.kernel.org
Cc: linux-kernel at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
---
 arch/arm/boot/dts/armada-xp-db.dts |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
index f97040d..b1fc728 100644
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ b/arch/arm/boot/dts/armada-xp-db.dts
@@ -14,11 +14,11 @@
  */
 
 /dts-v1/;
-/include/ "armada-xp.dtsi"
+/include/ "armada-xp-mv78460.dtsi"
 
 / {
 	model = "Marvell Armada XP Evaluation Board";
-	compatible = "marvell,axp-db", "marvell,armadaxp", "marvell,armada-370-xp";
+	compatible = "marvell,axp-db", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
 
 	chosen {
 		bootargs = "console=ttyS0,115200 earlyprintk";
-- 
1.7.10.4

[PATCH 10/11] arm: mvebu: enable PINCTRL usage

From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: 2012-08-11 12:58:08

From: Thomas Petazzoni <redacted>

Now that we have a proper pinctrl driver for Marvell EBU platforms,
enable PINCTRL support in ARCH_MVEBU.

Signed-off-by: Thomas Petazzoni <redacted>
---
Cc: Grant Likely <redacted>
Cc: Rob Herring <redacted>
Cc: Rob Landley <redacted>
Cc: Russell King <redacted>
Cc: Linus Walleij <redacted>
Cc: Lior Amsalem <redacted>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory CLEMENT <redacted>
Cc: Ben Dooks <redacted>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Thomas Petazzoni <redacted>
Cc: devicetree-discuss at lists.ozlabs.org
Cc: linux-doc at vger.kernel.org
Cc: linux-kernel at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
---
 arch/arm/Kconfig |    1 +
 1 file changed, 1 insertion(+)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 361f513..95317a9 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -573,6 +573,7 @@ config ARCH_MVEBU
 	select GENERIC_IRQ_CHIP
 	select IRQ_DOMAIN
 	select COMMON_CLK
+	select PINCTRL
 	help
 	  Support for the Marvell SoC Family with device tree support
 
-- 
1.7.10.4

[PATCH 01/11] pinctrl: mvebu: pinctrl driver core

From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: 2012-08-11 12:58:12

This patch adds a pinctrl driver core for Marvell SoCs plus DT
binding documentation. This core driver will be used by SoC family
specific drivers, i.e. Armada XP, Armada 370, Dove, Kirkwood, aso.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Thomas Petazzoni <redacted>
---
Cc: Grant Likely <redacted>
Cc: Rob Herring <redacted>
Cc: Rob Landley <redacted>
Cc: Russell King <redacted>
Cc: Linus Walleij <redacted>
Cc: Lior Amsalem <redacted>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory CLEMENT <redacted>
Cc: Ben Dooks <redacted>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Thomas Petazzoni <redacted>
Cc: devicetree-discuss at lists.ozlabs.org
Cc: linux-doc at vger.kernel.org
Cc: linux-kernel at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
---
 .../bindings/pinctrl/marvell,mvebu-pinctrl.txt     |   46 ++
 drivers/pinctrl/Kconfig                            |   10 +
 drivers/pinctrl/Makefile                           |    1 +
 drivers/pinctrl/pinctrl-mvebu.c                    |  758 ++++++++++++++++++++
 drivers/pinctrl/pinctrl-mvebu.h                    |  175 +++++
 5 files changed, 990 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt
 create mode 100644 drivers/pinctrl/pinctrl-mvebu.c
 create mode 100644 drivers/pinctrl/pinctrl-mvebu.h
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt
new file mode 100644
index 0000000..b3e5066
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt
@@ -0,0 +1,46 @@
+* Marvell SoC pinctrl core driver for mpp
+
+The pinctrl driver enables Marvell SoCs to configure the multi-purpose pins
+(mpp) to a specific function. For each SoC family there is a SoC specific
+driver using this core driver.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+A Marvell SoC pin configuration node is a node of a group of pins which can
+be used for a specific device or function. Each node requires one or more
+mpp pins or group of pins and a mpp function common to all pins.
+
+Required properties for pinctrl driver:
+- compatible: "marvell,<soc>-pinctrl"
+  Please refer to each marvell,<soc>-pinctrl.txt binding doc for supported SoCs.
+
+Required properties for pin configuration node:
+- marvell,pins: string array of mpp pins or group of pins to be muxed.
+- marvell,function: string representing to function to mux to for all
+    marvell,pins given in this pin configuration node. The function has to be
+    common for all marvell,pins. Please refer to marvell,<soc>-pinctrl.txt for
+    valid pin/pin group names and available function names for each SoC.
+
+Examples:
+
+uart1: serial at 12100 {
+	compatible = "ns16550a";
+	reg = <0x12100 0x100>;
+	reg-shift = <2>;
+	interrupts = <7>;
+	clock-frequency = <166666667>;
+
+	pinctrl-0 = <&pmx_uart1_sw>;
+};
+
+pinctrl: pinctrl at d0200 {
+	compatible = "marvell,dove-pinctrl";
+	reg = <0xd0200 0x20>;
+
+	pmx_uart1_sw: pmx-uart1-sw {
+		marvell,pins = "mpp_uart1";
+		marvell,function = "uart1";
+	};
+};
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 54e3588..b968335 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -145,6 +145,16 @@ config PINCTRL_COH901
 	  COH 901 335 and COH 901 571/3. They contain 3, 5 or 7
 	  ports of 8 GPIO pins each.
 
+config PINCTRL_MVEBU
+	bool "Marvell SoC pin controller drivers"
+	depends on ARCH_MVEBU
+	select PINMUX
+	select PINCONF
+	help
+	  Say yes here to support pinctrl driver on Marvell SoCs.
+	  This is only the driver core and additionally needs a SoC specific
+	  driver.
+
 source "drivers/pinctrl/spear/Kconfig"
 
 endmenu
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index f40b1f8..007ed32 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -29,5 +29,6 @@ obj-$(CONFIG_PINCTRL_TEGRA20)	+= pinctrl-tegra20.o
 obj-$(CONFIG_PINCTRL_TEGRA30)	+= pinctrl-tegra30.o
 obj-$(CONFIG_PINCTRL_U300)	+= pinctrl-u300.o
 obj-$(CONFIG_PINCTRL_COH901)	+= pinctrl-coh901.o
+obj-$(CONFIG_PINCTRL_MVEBU)	+= pinctrl-mvebu.o
 
 obj-$(CONFIG_PLAT_SPEAR)	+= spear/
diff --git a/drivers/pinctrl/pinctrl-mvebu.c b/drivers/pinctrl/pinctrl-mvebu.c
new file mode 100644
index 0000000..09172be
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-mvebu.c
@@ -0,0 +1,758 @@
+/*
+ * Marvell MVEBU pinctrl core driver
+ *
+ * Authors: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *          Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+
+#include "core.h"
+#include "pinctrl-mvebu.h"
+
+struct mvebu_pinctrl_function {
+	unsigned fid;
+	const char *name;
+	const char *setting;
+	const char **groups;
+	unsigned num_groups;
+};
+
+struct mvebu_pinctrl_group {
+	const char *name;
+	struct mvebu_mpp_ctrl *ctrl;
+	struct mvebu_mpp_ctrl_setting *settings;
+	unsigned num_settings;
+	unsigned gid;
+	unsigned *pins;
+	unsigned npins;
+};
+
+struct mvebu_pinctrl {
+	struct device *dev;
+	struct pinctrl_dev *pctldev;
+	struct pinctrl_desc desc;
+	void __iomem *base;
+	struct mvebu_pinctrl_group *groups;
+	unsigned num_groups;
+	struct mvebu_pinctrl_function *functions;
+	unsigned num_functions;
+	unsigned variant;
+};
+
+struct mvebu_pinctrl_group *mvebu_pinctrl_find_group_by_pid(
+	struct mvebu_pinctrl *pctl, unsigned pid)
+{
+	unsigned n;
+	for (n = 0; n < pctl->num_groups; n++) {
+		if (pid >= pctl->groups[n].pins[0] &&
+		    pid < pctl->groups[n].pins[0] +
+			pctl->groups[n].npins)
+			return &pctl->groups[n];
+	}
+	return NULL;
+}
+
+struct mvebu_pinctrl_group *mvebu_pinctrl_find_group_by_name(
+	struct mvebu_pinctrl *pctl, const char *name)
+{
+	unsigned n;
+	for (n = 0; n < pctl->num_groups; n++) {
+		if (strcmp(name, pctl->groups[n].name) == 0)
+			return &pctl->groups[n];
+	}
+	return NULL;
+}
+
+struct mvebu_mpp_ctrl_setting *mvebu_pinctrl_find_setting_by_val(
+	struct mvebu_pinctrl *pctl, struct mvebu_pinctrl_group *grp,
+	unsigned long config)
+{
+	unsigned n;
+	for (n = 0; n < grp->num_settings; n++) {
+		if (config == grp->settings[n].val) {
+			if (!pctl->variant || (pctl->variant &
+					       grp->settings[n].variant))
+				return &grp->settings[n];
+		}
+	}
+	return NULL;
+}
+
+struct mvebu_mpp_ctrl_setting *mvebu_pinctrl_find_setting_by_name(
+	struct mvebu_pinctrl *pctl, struct mvebu_pinctrl_group *grp,
+	const char *name)
+{
+	unsigned n;
+	for (n = 0; n < grp->num_settings; n++) {
+		if (strcmp(name, grp->settings[n].name) == 0) {
+			if (!pctl->variant || (pctl->variant &
+					       grp->settings[n].variant))
+				return &grp->settings[n];
+		}
+	}
+	return NULL;
+}
+
+struct mvebu_mpp_ctrl_setting *mvebu_pinctrl_find_gpio_setting(
+	struct mvebu_pinctrl *pctl, struct mvebu_pinctrl_group *grp)
+{
+	unsigned n;
+	for (n = 0; n < grp->num_settings; n++) {
+		if (grp->settings[n].flags &
+			(MVEBU_SETTING_GPO | MVEBU_SETTING_GPI)) {
+			if (!pctl->variant || (pctl->variant &
+						grp->settings[n].variant))
+				return &grp->settings[n];
+		}
+	}
+	return NULL;
+}
+
+struct mvebu_pinctrl_function *mvebu_pinctrl_find_function_by_name(
+	struct mvebu_pinctrl *pctl, const char *name)
+{
+	unsigned n;
+	for (n = 0; n < pctl->num_functions; n++) {
+		if (strcmp(name, pctl->functions[n].name) == 0)
+			return &pctl->functions[n];
+	}
+	return NULL;
+}
+
+static int mvebu_common_mpp_get(struct mvebu_pinctrl *pctl,
+				struct mvebu_pinctrl_group *grp,
+				unsigned long *config)
+{
+	unsigned pin = grp->gid;
+	unsigned off = (pin / 8) * 4;
+	unsigned shift = (pin % 8) * 4;
+
+	*config = readl(pctl->base + off);
+	*config >>= shift;
+	*config &= 0xf;
+
+	return 0;
+}
+
+static int mvebu_common_mpp_set(struct mvebu_pinctrl *pctl,
+				struct mvebu_pinctrl_group *grp,
+				unsigned long config)
+{
+	unsigned pin = grp->gid;
+	unsigned off = (pin / 8) * 4;
+	unsigned shift = (pin % 8) * 4;
+	unsigned long reg;
+
+	reg = readl(pctl->base + off);
+	reg &= ~(0xf << shift);
+	reg |= (config << shift);
+	writel(reg, pctl->base + off);
+
+	return 0;
+}
+
+static int mvebu_pinconf_group_get(struct pinctrl_dev *pctldev,
+				unsigned gid, unsigned long *config)
+{
+	struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	struct mvebu_pinctrl_group *grp = &pctl->groups[gid];
+
+	if (!grp->ctrl)
+		return -EINVAL;
+
+	if (grp->ctrl->mpp_get)
+		return grp->ctrl->mpp_get(grp->ctrl, config);
+
+	return mvebu_common_mpp_get(pctl, grp, config);
+}
+
+static int mvebu_pinconf_group_set(struct pinctrl_dev *pctldev,
+				unsigned gid, unsigned long config)
+{
+	struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	struct mvebu_pinctrl_group *grp = &pctl->groups[gid];
+
+	if (!grp->ctrl)
+		return -EINVAL;
+
+	if (grp->ctrl->mpp_set)
+		return grp->ctrl->mpp_set(grp->ctrl, config);
+
+	return mvebu_common_mpp_set(pctl, grp, config);
+}
+
+static void mvebu_pinconf_group_dbg_show(struct pinctrl_dev *pctldev,
+					struct seq_file *s, unsigned gid)
+{
+	struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	struct mvebu_pinctrl_group *grp = &pctl->groups[gid];
+	struct mvebu_mpp_ctrl_setting *curr;
+	unsigned long config;
+	unsigned n;
+
+	if (mvebu_pinconf_group_get(pctldev, gid, &config))
+		return;
+
+	curr = mvebu_pinctrl_find_setting_by_val(pctl, grp, config);
+
+	if (curr) {
+		seq_printf(s, "current: %s", curr->name);
+		if (curr->subname)
+			seq_printf(s, "(%s)", curr->subname);
+		if (curr->flags & (MVEBU_SETTING_GPO | MVEBU_SETTING_GPI)) {
+			seq_printf(s, "(");
+			if (curr->flags & MVEBU_SETTING_GPI)
+				seq_printf(s, "i");
+			if (curr->flags & MVEBU_SETTING_GPO)
+				seq_printf(s, "o");
+			seq_printf(s, ")");
+		}
+	} else
+		seq_printf(s, "current: UNKNOWN");
+
+	if (grp->num_settings > 1) {
+		seq_printf(s, ", available = [");
+		for (n = 0; n < grp->num_settings; n++) {
+			if (curr == &grp->settings[n])
+				continue;
+
+			/* skip unsupported settings for this variant */
+			if (pctl->variant &&
+			    !(pctl->variant & grp->settings[n].variant))
+				continue;
+
+			seq_printf(s, " %s", grp->settings[n].name);
+			if (grp->settings[n].subname)
+				seq_printf(s, "(%s)", grp->settings[n].subname);
+			if (grp->settings[n].flags &
+				(MVEBU_SETTING_GPO | MVEBU_SETTING_GPI)) {
+				seq_printf(s, "(");
+				if (grp->settings[n].flags & MVEBU_SETTING_GPI)
+					seq_printf(s, "i");
+				if (grp->settings[n].flags & MVEBU_SETTING_GPO)
+					seq_printf(s, "o");
+				seq_printf(s, ")");
+			}
+		}
+		seq_printf(s, " ]");
+	}
+	return;
+}
+
+struct pinconf_ops mvebu_pinconf_ops = {
+	.pin_config_group_get = mvebu_pinconf_group_get,
+	.pin_config_group_set = mvebu_pinconf_group_set,
+	.pin_config_group_dbg_show = mvebu_pinconf_group_dbg_show,
+};
+
+static int mvebu_pinmux_get_funcs_count(struct pinctrl_dev *pctldev)
+{
+	struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+
+	return pctl->num_functions;
+}
+
+static const char *mvebu_pinmux_get_func_name(struct pinctrl_dev *pctldev,
+					unsigned fid)
+{
+	struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+
+	return pctl->functions[fid].name;
+}
+
+static int mvebu_pinmux_get_groups(struct pinctrl_dev *pctldev, unsigned fid,
+				const char * const **groups,
+				unsigned * const num_groups)
+{
+	struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+
+	*groups = pctl->functions[fid].groups;
+	*num_groups = pctl->functions[fid].num_groups;
+	return 0;
+}
+
+static int mvebu_pinmux_enable(struct pinctrl_dev *pctldev, unsigned fid,
+			unsigned gid)
+{
+	struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	struct mvebu_pinctrl_function *func = &pctl->functions[fid];
+	struct mvebu_pinctrl_group *grp = &pctl->groups[gid];
+	struct mvebu_mpp_ctrl_setting *setting;
+	int ret;
+
+	setting = mvebu_pinctrl_find_setting_by_name(pctl, grp,
+						     func->setting);
+	if (!setting) {
+		dev_err(pctl->dev,
+			"unable to find setting %s in group %s\n",
+			func->setting, func->groups[gid]);
+		return -EINVAL;
+	}
+
+	ret = mvebu_pinconf_group_set(pctldev, grp->gid, setting->val);
+	if (ret) {
+		dev_err(pctl->dev, "cannot set group %s to %s\n",
+			func->groups[gid], func->setting);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int mvebu_pinmux_gpio_request_enable(struct pinctrl_dev *pctldev,
+			struct pinctrl_gpio_range *range, unsigned offset)
+{
+	struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	struct mvebu_pinctrl_group *grp;
+	struct mvebu_mpp_ctrl_setting *setting;
+
+	grp = mvebu_pinctrl_find_group_by_pid(pctl, offset);
+	if (!grp)
+		return -EINVAL;
+
+	if (grp->ctrl->mpp_gpio_req)
+		return grp->ctrl->mpp_gpio_req(grp->ctrl, offset);
+
+	setting = mvebu_pinctrl_find_gpio_setting(pctl, grp);
+	if (!setting)
+		return -ENOTSUPP;
+
+	return mvebu_pinconf_group_set(pctldev, grp->gid, setting->val);
+}
+
+static int mvebu_pinmux_gpio_set_direction(struct pinctrl_dev *pctldev,
+	   struct pinctrl_gpio_range *range, unsigned offset, bool input)
+{
+	struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	struct mvebu_pinctrl_group *grp;
+	struct mvebu_mpp_ctrl_setting *setting;
+
+	grp = mvebu_pinctrl_find_group_by_pid(pctl, offset);
+	if (!grp)
+		return -EINVAL;
+
+	if (grp->ctrl->mpp_gpio_dir)
+		return grp->ctrl->mpp_gpio_dir(grp->ctrl, offset, input);
+
+	setting = mvebu_pinctrl_find_gpio_setting(pctl, grp);
+	if (!setting)
+		return -ENOTSUPP;
+
+	if ((input && (setting->flags & MVEBU_SETTING_GPI)) ||
+	    (!input && (setting->flags & MVEBU_SETTING_GPO)))
+		return 0;
+
+	return -ENOTSUPP;
+}
+
+static struct pinmux_ops mvebu_pinmux_ops = {
+	.get_functions_count = mvebu_pinmux_get_funcs_count,
+	.get_function_name = mvebu_pinmux_get_func_name,
+	.get_function_groups = mvebu_pinmux_get_groups,
+	.gpio_request_enable = mvebu_pinmux_gpio_request_enable,
+	.gpio_set_direction = mvebu_pinmux_gpio_set_direction,
+	.enable = mvebu_pinmux_enable,
+};
+
+static int mvebu_pinctrl_get_groups_count(struct pinctrl_dev *pctldev)
+{
+	struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	return pctl->num_groups;
+}
+
+static const char *mvebu_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
+						unsigned gid)
+{
+	struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	return pctl->groups[gid].name;
+}
+
+static int mvebu_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
+					unsigned gid, const unsigned **pins,
+					unsigned *num_pins)
+{
+	struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	*pins = pctl->groups[gid].pins;
+	*num_pins = pctl->groups[gid].npins;
+	return 0;
+}
+
+static int mvebu_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
+					struct device_node *np,
+					struct pinctrl_map **map,
+					unsigned *num_maps)
+{
+	struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	struct property *prop;
+	const char *function;
+	const char *group;
+	int ret, nmaps, n;
+
+	*map = NULL;
+	*num_maps = 0;
+
+	ret = of_property_read_string(np, "marvell,function", &function);
+	if (ret) {
+		dev_err(pctl->dev,
+			"missing marvell,function in node %s\n", np->name);
+		return 0;
+	}
+
+	nmaps = of_property_count_strings(np, "marvell,pins");
+	if (nmaps < 0) {
+		dev_err(pctl->dev,
+			"missing marvell,pins in node %s\n", np->name);
+		return 0;
+	}
+
+	*map = kmalloc(nmaps * sizeof(struct pinctrl_map), GFP_KERNEL);
+	if (map == NULL) {
+		dev_err(pctl->dev,
+			"cannot allocate pinctrl_map memory for %s\n",
+			np->name);
+		return -ENOMEM;
+	}
+
+	n = 0;
+	of_property_for_each_string(np, "marvell,pins", prop, group) {
+		struct mvebu_pinctrl_group *grp =
+			mvebu_pinctrl_find_group_by_name(pctl, group);
+
+		if (!grp) {
+			dev_err(pctl->dev, "unknown pin %s", group);
+			continue;
+		}
+
+		if (!mvebu_pinctrl_find_setting_by_name(pctl, grp, function)) {
+			dev_err(pctl->dev, "unsupported function %s on pin %s",
+				function, group);
+			continue;
+		}
+
+		(*map)[n].type = PIN_MAP_TYPE_MUX_GROUP;
+		(*map)[n].data.mux.group = group;
+		(*map)[n].data.mux.function = np->name;
+		n++;
+	}
+
+	*num_maps = nmaps;
+
+	return 0;
+}
+
+static void mvebu_pinctrl_dt_free_map(struct pinctrl_dev *pctldev,
+				struct pinctrl_map *map, unsigned num_maps)
+{
+	kfree(map);
+}
+
+static struct pinctrl_ops mvebu_pinctrl_ops = {
+	.get_groups_count = mvebu_pinctrl_get_groups_count,
+	.get_group_name = mvebu_pinctrl_get_group_name,
+	.get_group_pins = mvebu_pinctrl_get_group_pins,
+	.dt_node_to_map = mvebu_pinctrl_dt_node_to_map,
+	.dt_free_map = mvebu_pinctrl_dt_free_map,
+};
+
+static int __devinit mvebu_pinctrl_dt_parse_function(struct mvebu_pinctrl *pctl,
+					struct device_node *np, unsigned idx)
+{
+	struct mvebu_pinctrl_function *func = &pctl->functions[idx];
+	struct property *prop;
+	const char *setting;
+	const char *group;
+	unsigned n = 0;
+	int ret, num_groups;
+
+	ret = of_property_read_string(np, "marvell,function", &setting);
+	if (ret) {
+		dev_err(pctl->dev,
+			"missing marvell,function in node %s\n", np->name);
+		return -EINVAL;
+	}
+
+	num_groups = of_property_count_strings(np, "marvell,pins");
+	if (num_groups <= 0) {
+		dev_err(pctl->dev,
+			"missing marvell,pins in node %s\n", np->name);
+		return -EINVAL;
+	}
+
+	func->fid = idx;
+	func->name = np->name;
+	func->setting = setting;
+	func->num_groups = num_groups;
+	func->groups = devm_kzalloc(pctl->dev, num_groups * sizeof(char *),
+				    GFP_KERNEL);
+	if (!func->groups) {
+		dev_err(pctl->dev,
+			"unable to alloc function groups\n");
+		return -ENOMEM;
+	}
+
+	of_property_for_each_string(np, "marvell,pins", prop, group) {
+		struct mvebu_pinctrl_group *grp =
+			mvebu_pinctrl_find_group_by_name(pctl, group);
+
+		if (!grp) {
+			dev_err(pctl->dev, "unknown pin %s", group);
+			return -EINVAL;
+		}
+
+		if (!mvebu_pinctrl_find_setting_by_name(pctl, grp, setting)) {
+			dev_err(pctl->dev, "unsupported function %s on pin %s",
+				setting, group);
+			return -EINVAL;
+		}
+
+		func->groups[n++] = group;
+	}
+	return 0;
+}
+
+static int __devinit mvebu_pinctrl_dt_parse(struct platform_device *pdev,
+					struct mvebu_pinctrl *pctl)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct device_node *np;
+	unsigned nfuncs = 0, n = 0;
+	int ret;
+
+	if (!node)
+		return -ENODEV;
+
+	nfuncs = of_get_child_count(node);
+	if (nfuncs <= 0) {
+		dev_warn(pctl->dev, "no function defined in device node\n");
+		return 0;
+	}
+
+	pctl->num_functions = nfuncs;
+	pctl->functions = devm_kzalloc(&pdev->dev, nfuncs *
+				sizeof(struct mvebu_pinctrl_function),
+				GFP_KERNEL);
+	if (!pctl->functions) {
+		dev_err(pctl->dev, "unable to alloc functions\n");
+		return -ENOMEM;
+	}
+
+	for_each_child_of_node(node, np) {
+		ret = mvebu_pinctrl_dt_parse_function(pctl, np, n++);
+		if (ret) {
+			dev_warn(pctl->dev, "failed to parse function %s\n",
+				np->name);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+int __devinit mvebu_pinctrl_probe(struct platform_device *pdev)
+{
+	struct mvebu_pinctrl_soc_info *soc = dev_get_platdata(&pdev->dev);
+	struct mvebu_pinctrl *pctl;
+	struct resource *res;
+	void __iomem *iomem;
+	struct pinctrl_pin_desc *pdesc;
+	unsigned gid, n, k;
+	int ret;
+
+	if (!soc || !soc->controls || !soc->modes) {
+		dev_err(&pdev->dev, "wrong pinctrl soc info\n");
+		return -EINVAL;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "unable to get resource\n");
+		return -ENODEV;
+	}
+
+	iomem = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+	if (!iomem) {
+		dev_err(&pdev->dev, "unable to ioremap\n");
+		return -ENODEV;
+	}
+
+	pctl = devm_kzalloc(&pdev->dev, sizeof(struct mvebu_pinctrl),
+			GFP_KERNEL);
+	if (!pctl) {
+		dev_err(&pdev->dev, "unable to alloc driver\n");
+		return -ENOMEM;
+	}
+
+	pctl->desc.name = dev_name(&pdev->dev);
+	pctl->desc.owner = THIS_MODULE;
+	pctl->desc.pctlops = &mvebu_pinctrl_ops;
+	pctl->desc.pmxops = &mvebu_pinmux_ops;
+	pctl->desc.confops = &mvebu_pinconf_ops;
+	pctl->variant = soc->variant;
+	pctl->base = iomem;
+	pctl->dev = &pdev->dev;
+	platform_set_drvdata(pdev, pctl);
+
+	/* count controls and create names for mvebu generic
+	   register controls; also does sanity checks */
+	pctl->num_groups = 0;
+	pctl->desc.npins = 0;
+	for (n = 0; n < soc->ncontrols; n++) {
+		struct mvebu_mpp_ctrl *ctrl = &soc->controls[n];
+		char *names;
+
+		pctl->desc.npins += ctrl->npins;
+		/* initial control pins */
+		for (k = 0; k < ctrl->npins; k++)
+			ctrl->pins[k] = ctrl->pid + k;
+
+		/* special soc specific control */
+		if (ctrl->mpp_get || ctrl->mpp_set) {
+			if (!ctrl->name || !ctrl->mpp_set || !ctrl->mpp_set) {
+				dev_err(&pdev->dev, "wrong soc control info\n");
+				return -EINVAL;
+			}
+			pctl->num_groups += 1;
+			continue;
+		}
+
+		/* generic mvebu register control */
+		names = devm_kzalloc(&pdev->dev, ctrl->npins * 8, GFP_KERNEL);
+		if (!names) {
+			dev_err(&pdev->dev, "failed to alloc mpp names\n");
+			return -ENOMEM;
+		}
+		for (k = 0; k < ctrl->npins; k++)
+			sprintf(names + 8*k, "mpp%d", ctrl->pid+k);
+		ctrl->name = names;
+		pctl->num_groups += ctrl->npins;
+	}
+
+	pdesc = devm_kzalloc(&pdev->dev, pctl->desc.npins *
+			     sizeof(struct pinctrl_pin_desc), GFP_KERNEL);
+	if (!pdesc) {
+		dev_err(&pdev->dev, "failed to alloc pinctrl pins\n");
+		return -ENOMEM;
+	}
+
+	for (n = 0; n < pctl->desc.npins; n++)
+		pdesc[n].number = n;
+	pctl->desc.pins = pdesc;
+
+	pctl->groups = devm_kzalloc(&pdev->dev, pctl->num_groups *
+			     sizeof(struct mvebu_pinctrl_group), GFP_KERNEL);
+	if (!pctl->groups) {
+		dev_err(&pdev->dev, "failed to alloc pinctrl groups\n");
+		return -ENOMEM;
+	}
+
+	/* assign mpp controls to groups */
+	gid = 0;
+	for (n = 0; n < soc->ncontrols; n++) {
+		struct mvebu_mpp_ctrl *ctrl = &soc->controls[n];
+		pctl->groups[gid].gid = gid;
+		pctl->groups[gid].ctrl = ctrl;
+		pctl->groups[gid].name = ctrl->name;
+		pctl->groups[gid].pins = ctrl->pins;
+		pctl->groups[gid].npins = ctrl->npins;
+
+		/* generic mvebu register control maps to a number of groups */
+		if (!ctrl->mpp_get && !ctrl->mpp_set) {
+			pctl->groups[gid].npins = 1;
+
+			for (k = 1; k < ctrl->npins; k++) {
+				gid++;
+				pctl->groups[gid].gid = gid;
+				pctl->groups[gid].ctrl = ctrl;
+				pctl->groups[gid].name = &ctrl->name[8*k];
+				pctl->groups[gid].pins = &ctrl->pins[k];
+				pctl->groups[gid].npins = 1;
+			}
+		}
+		gid++;
+	}
+
+	/* assign mpp modes to groups */
+	for (n = 0; n < soc->nmodes; n++) {
+		struct mvebu_mpp_mode *mode = &soc->modes[n];
+		struct mvebu_pinctrl_group *grp =
+			mvebu_pinctrl_find_group_by_pid(pctl, mode->pid);
+		unsigned num_settings;
+
+		if (!grp) {
+			dev_warn(&pdev->dev, "unknown pinctrl group %d\n",
+				mode->pid);
+			continue;
+		}
+
+		for (num_settings = 0; ;) {
+			struct mvebu_mpp_ctrl_setting *set =
+				&mode->settings[num_settings];
+
+			if (!set->name)
+				break;
+			num_settings++;
+
+			/* skip unsupported settings for this variant */
+			if (pctl->variant && !(pctl->variant & set->variant))
+				continue;
+
+			/* find gpio/gpo/gpi settings */
+			if (strcmp(set->name, "gpio") == 0)
+				set->flags = MVEBU_SETTING_GPI |
+					MVEBU_SETTING_GPO;
+			else if (strcmp(set->name, "gpo") == 0)
+				set->flags = MVEBU_SETTING_GPO;
+			else if (strcmp(set->name, "gpi") == 0)
+				set->flags = MVEBU_SETTING_GPI;
+		}
+
+		grp->settings = mode->settings;
+		grp->num_settings = num_settings;
+	}
+
+	ret = mvebu_pinctrl_dt_parse(pdev, pctl);
+	if (ret) {
+		/* look for pinmux functions in platform_device data */
+		dev_err(&pdev->dev, "unable to parse device tree\n");
+		return ret;
+	}
+
+	pctl->pctldev = pinctrl_register(&pctl->desc, &pdev->dev, pctl);
+	if (!pctl->pctldev) {
+		dev_err(&pdev->dev, "unable to register pinctrl driver\n");
+		return -EINVAL;
+	}
+
+	dev_info(&pdev->dev, "registered pinctrl driver\n");
+
+	/* register gpio ranges */
+	for (n = 0; n < soc->ngpioranges; n++)
+		pinctrl_add_gpio_range(pctl->pctldev, &soc->gpioranges[n]);
+
+	return 0;
+}
+
+int __devexit mvebu_pinctrl_remove(struct platform_device *pdev)
+{
+	struct mvebu_pinctrl *pctl = platform_get_drvdata(pdev);
+	pinctrl_unregister(pctl->pctldev);
+	return 0;
+}
diff --git a/drivers/pinctrl/pinctrl-mvebu.h b/drivers/pinctrl/pinctrl-mvebu.h
new file mode 100644
index 0000000..ee8057a
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-mvebu.h
@@ -0,0 +1,175 @@
+/*
+ * Marvell MVEBU pinctrl driver
+ *
+ * Authors: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *          Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __PINCTRL_MVEBU_H__
+#define __PINCTRL_MVEBU_H__
+
+/*
+ * struct mvebu_mpp_ctrl - describe a mpp control
+ * @name: name of the control group
+ * @pid: first pin id handled by this control
+ * @npins: number of pins controlled by this control
+ * @mpp_get: (optional) special function to get mpp setting
+ * @mpp_set: (optional) special function to set mpp setting
+ * @mpp_gpio_req: (optional) special function to request gpio
+ * @mpp_gpio_dir: (optional) special function to set gpio direction
+ *
+ * if optional mpp_get/_set functions are set these
+ * are used to get/set a specific mode. Otherwise it is
+ * assumed that the mpp control is based on 4-bit groups
+ * in subsequent registers.
+ *
+ * mpp_gpio_req/_dir functions can be used to allow pin settings
+ * with varying gpio pins.
+ */
+struct mvebu_mpp_ctrl {
+	const char *name;
+	u8 pid;
+	u8 npins;
+	unsigned *pins;
+	int (*mpp_get)(struct mvebu_mpp_ctrl *ctrl, unsigned long *config);
+	int (*mpp_set)(struct mvebu_mpp_ctrl *ctrl, unsigned long config);
+	int (*mpp_gpio_req)(struct mvebu_mpp_ctrl *ctrl, u8 pid);
+	int (*mpp_gpio_dir)(struct mvebu_mpp_ctrl *ctrl, u8 pid, bool input);
+};
+
+/*
+ * struct mvebu_mpp_ctrl_setting - describe a mpp ctrl setting
+ * @val: ctrl setting value
+ * @name: ctrl setting name, e.g. uart2, spi0 - unique per mpp_mode
+ * @subname: (optional) additional ctrl setting name, e.g. rts, cts
+ * @variant: (optional) variant identifier mask
+ * @flags: (private) flags to store gpi/gpo/gpio capabilities
+ *
+ * ctrl setting name will be used to switch to this setting in
+ * DT description, e.g. marvell,function = "uart2". subname
+ * is only for debugging purposes.
+ * If name is one of "gpi", "gpo", "gpio" gpio capabilities are
+ * parsed during initialization.
+ */
+struct mvebu_mpp_ctrl_setting {
+	u8 val;
+	const char *name;
+	const char *subname;
+	u8 variant;
+	u8 flags;
+#define  MVEBU_SETTING_GPO	(1 << 0)
+#define  MVEBU_SETTING_GPI	(1 << 1)
+};
+
+/*
+ * struct mvebu_mpp_mode - link ctrl and settings
+ * @pid: first pin id handled by this mode
+ * @settings: list of settings available for this mode
+ */
+struct mvebu_mpp_mode {
+	u8 pid;
+	struct mvebu_mpp_ctrl_setting *settings;
+};
+
+/*
+ * struct mvebu_pinctrl_soc_info -
+ *       SoC specific info passed to pinctrl-mvebu
+ * @variant: variant mask of soc_info
+ * @controls: list of available mvebu_mpp_ctrls
+ * @ncontrols: number of available mvebu_mpp_ctrls
+ * @modes: list of available mvebu_mpp_modes
+ * @nmodes: number of available mvebu_mpp_modes
+ * @gpioranges: list of pinctrl_gpio_ranges
+ * @ngpioranges: number of available pinctrl_gpio_ranges
+ */
+struct mvebu_pinctrl_soc_info {
+	u8 variant;
+	struct mvebu_mpp_ctrl *controls;
+	int ncontrols;
+	struct mvebu_mpp_mode *modes;
+	int nmodes;
+	struct pinctrl_gpio_range *gpioranges;
+	int ngpioranges;
+};
+
+#define MPP_REG_CTRL(_idl, _idh)				\
+	{							\
+		.name = NULL,					\
+		.pid = _idl,					\
+		.npins = _idh - _idl + 1,			\
+		.pins = (unsigned[_idh - _idl + 1]) { },	\
+		.mpp_get = NULL,				\
+		.mpp_set = NULL,				\
+		.mpp_gpio_req = NULL,				\
+		.mpp_gpio_dir = NULL,				\
+	}
+
+#define MPP_FUNC_CTRL(_idl, _idh, _name, _func)			\
+	{							\
+		.name = _name,					\
+		.pid = _idl,					\
+		.npins = _idh - _idl + 1,			\
+		.pins = (unsigned[_idh - _idl + 1]) { },	\
+		.mpp_get = _func ## _get,			\
+		.mpp_set = _func ## _set,			\
+		.mpp_gpio_req = NULL,				\
+		.mpp_gpio_dir = NULL,				\
+	}
+
+#define MPP_FUNC_GPIO_CTRL(_idl, _idh, _name, _func)		\
+	{							\
+		.name = _name,					\
+		.pid = _idl,					\
+		.npins = _idh - _idl + 1,			\
+		.pins = (unsigned[_idh - _idl + 1]) { },	\
+		.mpp_get = _func ## _get,			\
+		.mpp_set = _func ## _set,			\
+		.mpp_gpio_req = _func ## _gpio_req,		\
+		.mpp_gpio_dir = _func ## _gpio_dir,		\
+	}
+
+#define _MPP_VAR_FUNCTION(_val, _name, _subname, _mask)		\
+	{							\
+		.val = _val,					\
+		.name = _name,					\
+		.subname = _subname,				\
+		.variant = _mask,				\
+		.flags = 0,					\
+	}
+
+#if defined(CONFIG_DEBUG_FS)
+#define MPP_VAR_FUNCTION(_val, _name, _subname, _mask)		\
+	_MPP_VAR_FUNCTION(_val, _name, _subname, _mask)
+#else
+#define MPP_VAR_FUNCTION(_val, _name, _subname, _mask)		\
+	_MPP_VAR_FUNCTION(_val, _name, NULL, _mask)
+#endif
+
+#define MPP_FUNCTION(_val, _name, _subname)			\
+	MPP_VAR_FUNCTION(_val, _name, _subname, (u8)-1)
+
+#define MPP_MODE(_id, ...)					\
+	{							\
+		.pid = _id,					\
+		.settings = (struct mvebu_mpp_ctrl_setting[]){	\
+			__VA_ARGS__, { } },			\
+	}
+
+#define MPP_GPIO_RANGE(_id, _pinbase, _gpiobase, _npins)	\
+	{							\
+		.name = "mvebu-gpio",				\
+		.id = _id,					\
+		.pin_base = _pinbase,				\
+		.base = _gpiobase,				\
+		.npins = _npins,				\
+	}
+
+int mvebu_pinctrl_probe(struct platform_device *pdev);
+int mvebu_pinctrl_remove(struct platform_device *pdev);
+
+#endif
-- 
1.7.10.4

[PATCH 11/11] arm: mvebu: add pinctrl support in defconfig

From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: 2012-08-11 12:59:52

From: Thomas Petazzoni <redacted>

Signed-off-by: Thomas Petazzoni <redacted>
---
Cc: Grant Likely <redacted>
Cc: Rob Herring <redacted>
Cc: Rob Landley <redacted>
Cc: Russell King <redacted>
Cc: Linus Walleij <redacted>
Cc: Lior Amsalem <redacted>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory CLEMENT <redacted>
Cc: Ben Dooks <redacted>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Thomas Petazzoni <redacted>
Cc: devicetree-discuss at lists.ozlabs.org
Cc: linux-doc at vger.kernel.org
Cc: linux-kernel at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
---
 arch/arm/configs/mvebu_defconfig |    2 ++
 1 file changed, 2 insertions(+)
diff --git a/arch/arm/configs/mvebu_defconfig b/arch/arm/configs/mvebu_defconfig
index 2e86b31..cb07e64 100644
--- a/arch/arm/configs/mvebu_defconfig
+++ b/arch/arm/configs/mvebu_defconfig
@@ -21,6 +21,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_PINCTRL_ARMADA_370=y
+CONFIG_PINCTRL_ARMADA_XP=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-- 
1.7.10.4

Re: [PATCH 00/11] pinctrl: mvebu: pinctrl driver

From: Linus Walleij <hidden>
Date: 2012-08-20 08:12:45

On Sat, Aug 11, 2012 at 2:56 PM, Sebastian Hesselbarth
[off-list ref] wrote:
This patch set adds a core pinctrl driver for Marvell MVEBU SoCs and
SoC specific stubs for Armada 370, Armada XP, Dove, and Kirkwood.
The SoC specific stubs use the pinctrl-mvebu core driver that handles
pinctrl API and register accesses for common pinctrl registers.
Nice! I'll now go in and review it.

Please add Stephen Warren [off-list ref] on CC for
subsequent iterations.

Yours,
Linus Walleij

Re: [PATCH 01/11] pinctrl: mvebu: pinctrl driver core

From: Linus Walleij <hidden>
Date: 2012-08-20 09:09:57

On Sat, Aug 11, 2012 at 2:56 PM, Sebastian Hesselbarth
[off-list ref] wrote:
This patch adds a pinctrl driver core for Marvell SoCs plus DT
binding documentation. This core driver will be used by SoC family
specific drivers, i.e. Armada XP, Armada 370, Dove, Kirkwood, aso.
Thanks for dealing with this, much appreaciated!

Are you taking this patch series through some Marvell tree or do you want
me to carry it in the pinctrl tree?

(...)
quoted hunk
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt
@@ -0,0 +1,46 @@
+* Marvell SoC pinctrl core driver for mpp
+
+The pinctrl driver enables Marvell SoCs to configure the multi-purpose pins
+(mpp) to a specific function. For each SoC family there is a SoC specific
+driver using this core driver.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+A Marvell SoC pin configuration node is a node of a group of pins which can
+be used for a specific device or function. Each node requires one or more
+mpp pins or group of pins and a mpp function common to all pins.
+
+Required properties for pinctrl driver:
+- compatible: "marvell,<soc>-pinctrl"
+  Please refer to each marvell,<soc>-pinctrl.txt binding doc for supported SoCs.
+
+Required properties for pin configuration node:
+- marvell,pins: string array of mpp pins or group of pins to be muxed.
+- marvell,function: string representing to function to mux to for all
+    marvell,pins given in this pin configuration node. The function has to be
+    common for all marvell,pins. Please refer to marvell,<soc>-pinctrl.txt for
+    valid pin/pin group names and available function names for each SoC.
+
+Examples:
+
+uart1: serial at 12100 {
+       compatible = "ns16550a";
+       reg = <0x12100 0x100>;
+       reg-shift = <2>;
+       interrupts = <7>;
+       clock-frequency = <166666667>;
It's got nothing to do with this patch, but getting a clock frequency
out of the DT instead of getting it from the clk_get_rate(clk) and
the clock tree seems absurd... (But maybe this platform does not
even have a clk implementation?)
+
+       pinctrl-0 = <&pmx_uart1_sw>;
+};
+
+pinctrl: pinctrl at d0200 {
+       compatible = "marvell,dove-pinctrl";
+       reg = <0xd0200 0x20>;
+
+       pmx_uart1_sw: pmx-uart1-sw {
+               marvell,pins = "mpp_uart1";
+               marvell,function = "uart1";
+       };
+};
This looks very good.

(...)
+#include <linux/pinctrl/consumer.h>
Why are you including this header?
(There are valid reasons, state them in a comment,
e.g. /* to access pinctrl_gpio* in GPIO portions */)
+struct mvebu_pinctrl_function {
+       unsigned fid;
+       const char *name;
+       const char *setting;
+       const char **groups;
+       unsigned num_groups;
+};
+
+struct mvebu_pinctrl_group {
+       const char *name;
+       struct mvebu_mpp_ctrl *ctrl;
+       struct mvebu_mpp_ctrl_setting *settings;
+       unsigned num_settings;
+       unsigned gid;
+       unsigned *pins;
+       unsigned npins;
+};
+
+struct mvebu_pinctrl {
+       struct device *dev;
+       struct pinctrl_dev *pctldev;
+       struct pinctrl_desc desc;
+       void __iomem *base;
+       struct mvebu_pinctrl_group *groups;
+       unsigned num_groups;
+       struct mvebu_pinctrl_function *functions;
+       unsigned num_functions;
+       unsigned variant;
+};
There is some other "variant" field elsewhere that is
a u8, is this correct? In this and the other case, should
this "variant" rather be an enum?
+struct mvebu_pinctrl_group *mvebu_pinctrl_find_group_by_pid(
+       struct mvebu_pinctrl *pctl, unsigned pid)
+{
+       unsigned n;
+       for (n = 0; n < pctl->num_groups; n++) {
+               if (pid >= pctl->groups[n].pins[0] &&
+                   pid < pctl->groups[n].pins[0] +
+                       pctl->groups[n].npins)
+                       return &pctl->groups[n];
+       }
+       return NULL;
+}
+
+struct mvebu_pinctrl_group *mvebu_pinctrl_find_group_by_name(
+       struct mvebu_pinctrl *pctl, const char *name)
+{
+       unsigned n;
+       for (n = 0; n < pctl->num_groups; n++) {
+               if (strcmp(name, pctl->groups[n].name) == 0)
+                       return &pctl->groups[n];
+       }
+       return NULL;
+}
+
+struct mvebu_mpp_ctrl_setting *mvebu_pinctrl_find_setting_by_val(
+       struct mvebu_pinctrl *pctl, struct mvebu_pinctrl_group *grp,
+       unsigned long config)
+{
+       unsigned n;
+       for (n = 0; n < grp->num_settings; n++) {
+               if (config == grp->settings[n].val) {
+                       if (!pctl->variant || (pctl->variant &
+                                              grp->settings[n].variant))
+                               return &grp->settings[n];
+               }
+       }
+       return NULL;
+}
+
+struct mvebu_mpp_ctrl_setting *mvebu_pinctrl_find_setting_by_name(
+       struct mvebu_pinctrl *pctl, struct mvebu_pinctrl_group *grp,
+       const char *name)
+{
+       unsigned n;
+       for (n = 0; n < grp->num_settings; n++) {
+               if (strcmp(name, grp->settings[n].name) == 0) {
+                       if (!pctl->variant || (pctl->variant &
+                                              grp->settings[n].variant))
+                               return &grp->settings[n];
+               }
+       }
+       return NULL;
+}
+
+struct mvebu_mpp_ctrl_setting *mvebu_pinctrl_find_gpio_setting(
+       struct mvebu_pinctrl *pctl, struct mvebu_pinctrl_group *grp)
+{
+       unsigned n;
+       for (n = 0; n < grp->num_settings; n++) {
+               if (grp->settings[n].flags &
+                       (MVEBU_SETTING_GPO | MVEBU_SETTING_GPI)) {
+                       if (!pctl->variant || (pctl->variant &
+                                               grp->settings[n].variant))
+                               return &grp->settings[n];
+               }
+       }
+       return NULL;
+}
+
+struct mvebu_pinctrl_function *mvebu_pinctrl_find_function_by_name(
+       struct mvebu_pinctrl *pctl, const char *name)
+{
+       unsigned n;
+       for (n = 0; n < pctl->num_functions; n++) {
+               if (strcmp(name, pctl->functions[n].name) == 0)
+                       return &pctl->functions[n];
+       }
+       return NULL;
+}
+
+static int mvebu_common_mpp_get(struct mvebu_pinctrl *pctl,
+                               struct mvebu_pinctrl_group *grp,
+                               unsigned long *config)
+{
+       unsigned pin = grp->gid;
+       unsigned off = (pin / 8) * 4;
+       unsigned shift = (pin % 8) * 4;
Some magic numbers here. Either use relevant #define:s or
put an inline comment that explains what is going on.
+
+       *config = readl(pctl->base + off);
+       *config >>= shift;
+       *config &= 0xf;
Here too...
+
+       return 0;
+}
+
+static int mvebu_common_mpp_set(struct mvebu_pinctrl *pctl,
+                               struct mvebu_pinctrl_group *grp,
+                               unsigned long config)
+{
+       unsigned pin = grp->gid;
+       unsigned off = (pin / 8) * 4;
+       unsigned shift = (pin % 8) * 4;
+       unsigned long reg;
+
+       reg = readl(pctl->base + off);
+       reg &= ~(0xf << shift);
+       reg |= (config << shift);
+       writel(reg, pctl->base + off);
+
+       return 0;
+}
Same comment as previous function.

(...)
+static void mvebu_pinctrl_dt_free_map(struct pinctrl_dev *pctldev,
+                               struct pinctrl_map *map, unsigned num_maps)
+{
+       kfree(map);
+}
Is it possible to use devm_* managed devm_kzalloc() for this map
so you don't need to free it explicitly?

(Maybe not, just checking.)

The rest of this file is looking so good that I find nothing to comment on.

(...)
quoted hunk
diff --git a/drivers/pinctrl/pinctrl-mvebu.h b/drivers/pinctrl/pinctrl-mvebu.h
(...)
+/*
Kerneldoc begins with /** have you really tested to generate
kerneldoc?
+ * struct mvebu_mpp_ctrl - describe a mpp control
+ * @name: name of the control group
+ * @pid: first pin id handled by this control
+ * @npins: number of pins controlled by this control
+ * @mpp_get: (optional) special function to get mpp setting
+ * @mpp_set: (optional) special function to set mpp setting
+ * @mpp_gpio_req: (optional) special function to request gpio
+ * @mpp_gpio_dir: (optional) special function to set gpio direction
+ *
+ * if optional mpp_get/_set functions are set these
+ * are used to get/set a specific mode. Otherwise it is
+ * assumed that the mpp control is based on 4-bit groups
+ * in subsequent registers.
+ *
+ * mpp_gpio_req/_dir functions can be used to allow pin settings
+ * with varying gpio pins.
+ */
+struct mvebu_mpp_ctrl {
+       const char *name;
+       u8 pid;
+       u8 npins;
So, there will never be > 256 pins on a Marvell platform?

Just checking...
+       unsigned *pins;
+       int (*mpp_get)(struct mvebu_mpp_ctrl *ctrl, unsigned long *config);
+       int (*mpp_set)(struct mvebu_mpp_ctrl *ctrl, unsigned long config);
+       int (*mpp_gpio_req)(struct mvebu_mpp_ctrl *ctrl, u8 pid);
+       int (*mpp_gpio_dir)(struct mvebu_mpp_ctrl *ctrl, u8 pid, bool input);
+};
+
+/*
/**
+ * struct mvebu_mpp_ctrl_setting - describe a mpp ctrl setting
+ * @val: ctrl setting value
It is not obvious to me what this means, it it possible to elaborate
on how this member is defined and used?
+ * @name: ctrl setting name, e.g. uart2, spi0 - unique per mpp_mode
+ * @subname: (optional) additional ctrl setting name, e.g. rts, cts
+ * @variant: (optional) variant identifier mask
This thing again, there are lots of "variants" around here.
Is it a candidate for an enum?
+ * @flags: (private) flags to store gpi/gpo/gpio capabilities
Write something about the two available flags and what they
mean maybe?
+ *
+ * ctrl setting name will be used to switch to this setting in
+ * DT description, e.g. marvell,function = "uart2". subname
+ * is only for debugging purposes.
+ * If name is one of "gpi", "gpo", "gpio" gpio capabilities are
+ * parsed during initialization.
+ */
+struct mvebu_mpp_ctrl_setting {
+       u8 val;
+       const char *name;
+       const char *subname;
+       u8 variant;
enum?
+       u8 flags;
+#define  MVEBU_SETTING_GPO     (1 << 0)
+#define  MVEBU_SETTING_GPI     (1 << 1)
So these are the possible flags I suspect. (Looking good.)
+};
+
+/*
+ * struct mvebu_mpp_mode - link ctrl and settings
+ * @pid: first pin id handled by this mode
+ * @settings: list of settings available for this mode
+ */
+struct mvebu_mpp_mode {
+       u8 pid;
+       struct mvebu_mpp_ctrl_setting *settings;
+};
+
+/*
+ * struct mvebu_pinctrl_soc_info -
+ *       SoC specific info passed to pinctrl-mvebu
+ * @variant: variant mask of soc_info
+ * @controls: list of available mvebu_mpp_ctrls
+ * @ncontrols: number of available mvebu_mpp_ctrls
+ * @modes: list of available mvebu_mpp_modes
+ * @nmodes: number of available mvebu_mpp_modes
+ * @gpioranges: list of pinctrl_gpio_ranges
+ * @ngpioranges: number of available pinctrl_gpio_ranges
+ */
+struct mvebu_pinctrl_soc_info {
+       u8 variant;
Why is this an u8 rather than an enum?
+       struct mvebu_mpp_ctrl *controls;
+       int ncontrols;
+       struct mvebu_mpp_mode *modes;
+       int nmodes;
+       struct pinctrl_gpio_range *gpioranges;
+       int ngpioranges;
+};
(...)
+#if defined(CONFIG_DEBUG_FS)
+#define MPP_VAR_FUNCTION(_val, _name, _subname, _mask)         \
+       _MPP_VAR_FUNCTION(_val, _name, _subname, _mask)
+#else
+#define MPP_VAR_FUNCTION(_val, _name, _subname, _mask)         \
+       _MPP_VAR_FUNCTION(_val, _name, NULL, _mask)
+#endif
This looks a bit kludgy. Is the purpose to save memory
if debugfs is not used?

This looks good overall.

Yours,
Linus Walleij

Re: [PATCH 01/11] pinctrl: mvebu: pinctrl driver core

From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: 2012-08-20 09:46:19

On 8/20/12, Linus Walleij [off-list ref] wrote:
Are you taking this patch series through some Marvell tree or do you want
me to carry it in the pinctrl tree?
Hi Linus,

I think it would be better to take it through the Marvell tree of Jason
Cooper. It is only for Marvell SoCs anyway.
quoted
+uart1: serial at 12100 {
+       compatible = "ns16550a";
+       reg = <0x12100 0x100>;
+       reg-shift = <2>;
+       interrupts = <7>;
+       clock-frequency = <166666667>;
It's got nothing to do with this patch, but getting a clock frequency
out of the DT instead of getting it from the clk_get_rate(clk) and
the clock tree seems absurd... (But maybe this platform does not
even have a clk implementation?)
It's of_serial's implementation. I patched that once for getting
frequency out of "clocks" property but then I got busy with
porting mach-dove and pinctrl.. Marvell SoCs do have a clk
implementation and as soon as of_serial can handle "clocks"
property it will be used for sure. I can remove "clock-frequency"
from the example anyway as it is not really part of pinctrl
binding documentation.
(...)
quoted
+#include <linux/pinctrl/consumer.h>
Why are you including this header?
(There are valid reasons, state them in a comment,
e.g. /* to access pinctrl_gpio* in GPIO portions */)
I guess it was a left-over from my experiments with
default pinmux configuration until you pointed me to
the correct way of having the pinctrl itself hog muxes.

I'll remove that include.
quoted
+struct mvebu_pinctrl {
+       struct device *dev;
+       struct pinctrl_dev *pctldev;
+       struct pinctrl_desc desc;
+       void __iomem *base;
+       struct mvebu_pinctrl_group *groups;
+       unsigned num_groups;
+       struct mvebu_pinctrl_function *functions;
+       unsigned num_functions;
+       unsigned variant;
+};
There is some other "variant" field elsewhere that is
a u8, is this correct? In this and the other case, should
this "variant" rather be an enum?
I'll review the variant types but inside pinctrl-mvebu variant
is used as a bit mask to distinguish different variants. Anyway,
they should always be the same size.
quoted
+static int mvebu_common_mpp_get(struct mvebu_pinctrl *pctl,
+                               struct mvebu_pinctrl_group *grp,
+                               unsigned long *config)
+{
+       unsigned pin = grp->gid;
+       unsigned off = (pin / 8) * 4;
+       unsigned shift = (pin % 8) * 4;
Some magic numbers here. Either use relevant #define:s or
put an inline comment that explains what is going on.
Ok.
quoted
+static void mvebu_pinctrl_dt_free_map(struct pinctrl_dev *pctldev,
+                               struct pinctrl_map *map, unsigned
num_maps)
+{
+       kfree(map);
+}
Is it possible to use devm_* managed devm_kzalloc() for this map
so you don't need to free it explicitly?

(Maybe not, just checking.)
Hmm, I guess not as I thought I've read not to use devm_kfree when
you allocate _and_ free stuff on runtime without removing the device
itself, right?
quoted
diff --git a/drivers/pinctrl/pinctrl-mvebu.h
b/drivers/pinctrl/pinctrl-mvebu.h
(...)
quoted
+/*
Kerneldoc begins with /** have you really tested to generate
kerneldoc?
Nope, I wasn't even aware of that, sorry. I just copied it over
from some other pinctrl include. I'll check for compatibility with
kerneldoc.
quoted
+struct mvebu_mpp_ctrl {
+       const char *name;
+       u8 pid;
+       u8 npins;
So, there will never be > 256 pins on a Marvell platform?
Well, with all current platforms we are well below 100. I guess
256 max (muxable) pins will be enough.
quoted
+ * struct mvebu_mpp_ctrl_setting - describe a mpp ctrl setting
+ * @val: ctrl setting value
It is not obvious to me what this means, it it possible to elaborate
on how this member is defined and used?
Well, I see if I can clarify the description but wrt the datasheet it
_should_ be quite obvious.
quoted
+ * @variant: (optional) variant identifier mask
This thing again, there are lots of "variants" around here.
Is it a candidate for an enum?
As it is a mask, I don't think enum fits here.
quoted
+ * @flags: (private) flags to store gpi/gpo/gpio capabilities
Write something about the two available flags and what they
mean maybe?
Ok.
quoted
+#define  MVEBU_SETTING_GPO     (1 << 0)
+#define  MVEBU_SETTING_GPI     (1 << 1)
So these are the possible flags I suspect. (Looking good.)
Yes, some mpp pins on Marvell SoCs are out-only, while
normally they are in-out. I haven't seen in-only yet but better
to have the flags ready if someone stumbles upon one.
quoted
+#if defined(CONFIG_DEBUG_FS)
+#define MPP_VAR_FUNCTION(_val, _name, _subname, _mask)         \
+       _MPP_VAR_FUNCTION(_val, _name, _subname, _mask)
+#else
+#define MPP_VAR_FUNCTION(_val, _name, _subname, _mask)         \
+       _MPP_VAR_FUNCTION(_val, _name, NULL, _mask)
+#endif
This looks a bit kludgy. Is the purpose to save memory
if debugfs is not used?
Yes, that was the intention. Subnames are not used by pinctrl at all,
other for debugfs files. Although, there are some pins that have two different
settings for the same device name, e.g. sata(prsnt) and sata(act), I don't
think it is a good idea to use the subname but have sata(prsnt) and sata-1(act)
instead. Otherwise, you'll always have to look up the specific function for
each pin. OTOH, I could check for "sata" and take the subname into account
when it is given in marvell,function. But it will not help reducing the required
pinmux descriptions in DT because you still have to distinguish both and
there are only 2 out of ~50 groups that have them for Dove.
This looks good overall.
Thanks!
In some internal review with Andrew I also added a spinlock to
mvebu_pinconf_get/_set that will protect all calls to generic and specific
_get/_set register accesses. Moreover, I replaced clk_get_sys in pinctrl-dove
with the devm_ counterpart and removed the explicit clk_put.

Sebastian

Re: [PATCH 01/11] pinctrl: mvebu: pinctrl driver core

From: Thomas Petazzoni <hidden>
Date: 2012-08-20 12:52:10

Hello,

Le Mon, 20 Aug 2012 11:46:14 +0200,
Sebastian Hesselbarth [off-list ref] a ?crit :
quoted
quoted
+uart1: serial at 12100 {
+       compatible = "ns16550a";
+       reg = <0x12100 0x100>;
+       reg-shift = <2>;
+       interrupts = <7>;
+       clock-frequency = <166666667>;
It's got nothing to do with this patch, but getting a clock frequency
out of the DT instead of getting it from the clk_get_rate(clk) and
the clock tree seems absurd... (But maybe this platform does not
even have a clk implementation?)
It's of_serial's implementation. I patched that once for getting
frequency out of "clocks" property but then I got busy with
porting mach-dove and pinctrl.. Marvell SoCs do have a clk
implementation and as soon as of_serial can handle "clocks"
property it will be used for sure. I can remove "clock-frequency"
from the example anyway as it is not really part of pinctrl
binding documentation.
We are also working on using the clk framework for the 370/XP support
(my colleague Gr?gory in Cc has started working on this last week), and
we also want to be able to get the serial clock-frequency from the clk
framework instead of an explicit value in the DT node. But that's a
separate topic :)
quoted
Is it possible to use devm_* managed devm_kzalloc() for this map
so you don't need to free it explicitly?

(Maybe not, just checking.)
Hmm, I guess not as I thought I've read not to use devm_kfree when
you allocate _and_ free stuff on runtime without removing the device
itself, right?
It is also my understanding that devm_*() functions should be used to
allocate things that should persist until the device is removed. But I
might be wrong here.
quoted
quoted
+struct mvebu_mpp_ctrl {
+       const char *name;
+       u8 pid;
+       u8 npins;
So, there will never be > 256 pins on a Marvell platform?
Well, with all current platforms we are well below 100. I guess
256 max (muxable) pins will be enough.
Agreed, and this structure is completely internal to the kernel, so we
can easily change it in the future if needed.
quoted
quoted
+ * struct mvebu_mpp_ctrl_setting - describe a mpp ctrl setting
+ * @val: ctrl setting value
It is not obvious to me what this means, it it possible to elaborate
on how this member is defined and used?
Well, I see if I can clarify the description but wrt the datasheet it
_should_ be quite obvious.
I think the setting/function/group/control terminology would benefit
from an explanation, as it isn't very easy to figure out what all these
words mean in the context of the pinctrl-mvebu driver.
In some internal review with Andrew I also added a spinlock to
mvebu_pinconf_get/_set that will protect all calls to generic and specific
_get/_set register accesses. Moreover, I replaced clk_get_sys in pinctrl-dove
with the devm_ counterpart and removed the explicit clk_put.
Yes, I had seen this discussion, but I am not sure it is needed: it
seems the pinctrl core calls all the pinconf_set/pinconf_get methods
with the pinctrl_mutex held. When I wrote an initial pinctrl driver for
370/XP I had the same question as Andrew and my conclusion was that the
locking done by the pinctrl subsystem core was sufficient.

Best regards,

Thomas
-- 
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

Re: [PATCH 02/11] pinctrl: mvebu: dove pinctrl driver

From: Linus Walleij <hidden>
Date: 2012-08-20 13:43:15

On Sat, Aug 11, 2012 at 2:56 PM, Sebastian Hesselbarth
[off-list ref] wrote:

(...)
quoted hunk
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
@@ -147,7 +147,7 @@ config PINCTRL_COH901

 config PINCTRL_MVEBU
        bool "Marvell SoC pin controller drivers"
-       depends on ARCH_MVEBU
+       depends on ARCH_MVEBU || ARCH_DOVE
Hmmmm.

Shouldn't this thing rather be:

depends on PLAT_ORION

else you end up lining up all Marvell machines here...
quoted hunk
        select PINMUX
        select PINCONF
        help
@@ -155,6 +155,13 @@ config PINCTRL_MVEBU
          This is only the driver core and additionally needs a SoC specific
          driver.

+config PINCTRL_DOVE
+       bool "Support for Marvell Dove SoCs"
+       depends on PINCTRL_MVEBU
Shouldn't this rather be:

depends on ARCH_DOVE
select PINCTRL_MVEBU

since you call down into the mvebu driver, it definatley needs
to select that.

(...)
quoted hunk
diff --git a/drivers/pinctrl/pinctrl-dove.c b/drivers/pinctrl/pinctrl-dove.c
+#define  DOVE_AU0_AC97_SEL             (1 << 16)
It is way cleaner to say:

#include <linux/bitops.h>

#define  DOVE_AU0_AC97_SEL             BIT(16)

(...)
+static int dove_pmu_mpp_ctrl_get(struct mvebu_mpp_ctrl *ctrl,
+                                unsigned long *config)
+{
+       unsigned off = (ctrl->pid / 8) * 4;
+       unsigned shift = (ctrl->pid % 8) * 4;
+       unsigned long pmu = readl(DOVE_PMU_MPP_GENERAL_CTRL);
+       unsigned long mpp = readl(DOVE_MPP_VIRT_BASE + off);
+
+       if (pmu & (1 << ctrl->pid))
+               *config = 0x10;
+       else
+               *config = (mpp >> shift) & 0xf;
+       return 0;
+}
Same comments about the magic numbers as in the review of the first
patch.
+static int dove_pmu_mpp_ctrl_set(struct mvebu_mpp_ctrl *ctrl,
+                                unsigned long config)
+{
+       unsigned off = (ctrl->pid / 8) * 4;
+       unsigned shift = (ctrl->pid % 8) * 4;
+       unsigned long pmu = readl(DOVE_PMU_MPP_GENERAL_CTRL);
+       unsigned long mpp = readl(DOVE_MPP_VIRT_BASE + off);
+
+       if (config == 0x10)
+               writel(pmu | (1 << ctrl->pid), DOVE_PMU_MPP_GENERAL_CTRL);
+       else {
+               writel(pmu & ~(1 << ctrl->pid), DOVE_PMU_MPP_GENERAL_CTRL);
+               mpp &= ~(0xf << shift);
+               mpp |= config << shift;
+               writel(mpp, DOVE_MPP_VIRT_BASE + off);
+       }
+       return 0;
+}
Dito.
+static int dove_mpp4_ctrl_get(struct mvebu_mpp_ctrl *ctrl,
+                             unsigned long *config)
+{
+       unsigned long mpp4 = readl(DOVE_MPP_CTRL4_VIRT_BASE);
+       unsigned long mask;
+
+       if (ctrl->pid == 24)
+               mask = DOVE_CAM_GPIO_SEL;
+       else if (ctrl->pid == 40)
+               mask = DOVE_SD0_GPIO_SEL;
+       else if (ctrl->pid == 46)
+               mask = DOVE_SD1_GPIO_SEL;
+       else if (ctrl->pid == 58)
+               mask = DOVE_SPI_GPIO_SEL;
+       else if (ctrl->pid == 62)
+               mask = DOVE_UART1_GPIO_SEL;
+       else
+               return -EINVAL;
Magic numbers, atleast provide a comment on what is so special about
these pins, and can you use a switch() statement instead?

(...)
+static int dove_mpp4_ctrl_set(struct mvebu_mpp_ctrl *ctrl,
+                             unsigned long config)
+{
+       unsigned long mpp4 = readl(DOVE_MPP_CTRL4_VIRT_BASE);
+       unsigned long mask;
+
+       if (ctrl->pid == 24)
+               mask = DOVE_CAM_GPIO_SEL;
+       else if (ctrl->pid == 40)
+               mask = DOVE_SD0_GPIO_SEL;
+       else if (ctrl->pid == 46)
+               mask = DOVE_SD1_GPIO_SEL;
+       else if (ctrl->pid == 58)
+               mask = DOVE_SPI_GPIO_SEL;
+       else if (ctrl->pid == 62)
+               mask = DOVE_UART1_GPIO_SEL;
+       else
+               return -EINVAL;
Dito.

(...)
+static int dove_audio1_ctrl_get(struct mvebu_mpp_ctrl *ctrl,
+                               unsigned long *config)
+{
+       unsigned long mpp4 = readl(DOVE_MPP_CTRL4_VIRT_BASE);
+       unsigned long sspc1 = readl(DOVE_SSP_CTRL_STATUS_1);
+       unsigned long gmpp = readl(DOVE_MPP_GENERAL_VIRT_BASE);
+       unsigned long gcfg2 = readl(DOVE_GLOBAL_CONFIG_2);
+
+       *config = 0;
+       if (mpp4 & DOVE_AU1_GPIO_SEL)
+               *config |= 0x8;
+       if (sspc1 & DOVE_SSP_ON_AU1)
+               *config |= 0x4;
+       if (gmpp & DOVE_AU1_SPDIFO_GPIO_EN)
+               *config |= 0x2;
+       if (gcfg2 & DOVE_TWSI_OPTION3_GPIO)
+               *config |= 0x1;
More magic, but the flags make it clear what the set
bits are all about, so OK.

But I would have:
#include <linux/bitops.h>

*config |= BIT(0);

etc.
+       /* SSP/TWSI only if I2S1 not set*/
+       if ((*config & 0x8) == 0)
+               *config &= ~(0x4 | 0x1);
+       /* TWSI only if SPDIFO not set*/
+       if ((*config & 0x2) == 0)
+               *config &= ~(0x1);
+       return 0;
And that applies to these.
+static int dove_audio1_ctrl_set(struct mvebu_mpp_ctrl *ctrl,
+                               unsigned long config)
+{
+       unsigned long mpp4 = readl(DOVE_MPP_CTRL4_VIRT_BASE);
+       unsigned long sspc1 = readl(DOVE_SSP_CTRL_STATUS_1);
+       unsigned long gmpp = readl(DOVE_MPP_GENERAL_VIRT_BASE);
+       unsigned long gcfg2 = readl(DOVE_GLOBAL_CONFIG_2);
+
+       if (config & 0x1)
+               gcfg2 |= DOVE_TWSI_OPTION3_GPIO;
+       if (config & 0x2)
+               gmpp |= DOVE_AU1_SPDIFO_GPIO_EN;
+       if (config & 0x4)
+               sspc1 |= DOVE_SSP_ON_AU1;
+       if (config & 0x8)
+               mpp4 |= DOVE_AU1_GPIO_SEL;
Dito.
+static int dove_audio1_ctrl_gpio_req(struct mvebu_mpp_ctrl *ctrl, u8 pid)
+{
+       unsigned long config;
+
+       dove_audio1_ctrl_get(ctrl, &config);
+
+       switch (config) {
+       /* mode 0x00 i2s1/spdifo : no gpio */
+       /* mode 0x0c ssp/spdifo  : no gpio */
+       /* mode 0x0f ssp/twsi    : no gpio */
+       case 0x00:
+       case 0x0c:
+       case 0x0f:
+               return -ENOTSUPP;
Nice with the comments (also before the function),
now I understand what's happening, this is pretty OK,
I would have put the comments on the same
line as the magic number but whatever.

However you could just delete these lines and let them
fall through to -ENOTSUPP at the bottom.
+
+       /* mode 0x02 i2s1 : gpio[56:57] */
+       /* mode 0x0e ssp  : gpio[56:57] */
+       case 0x02:
+       case 0x0e:
+               if (pid >= 56)
+                       return 0;
+
+       /* mode 0x08 spdifo : gpio[52:55] */
+       /* mode 0x0b twsi   : gpio[52:55] */
+       case 0x08:
+       case 0x0b:
+               if (pid <= 55)
+                       return 0;
+
+       /* mode 0x0a/gpio : all gpio */
+       case 0x0a:
+               return 0;
+       }
+
+       return -ENOTSUPP;
+}
+/* mpp[52:57] has gpio pins capable of in and out */
+static int dove_audio1_ctrl_gpio_dir(struct mvebu_mpp_ctrl *ctrl, u8 pid,
+                               bool input)
+{
+       return 0;
+}
So should this not return a -ENOTSUPP for
pin < 52 || pin > 57?

(...)
+static int __devinit dove_pinctrl_probe(struct platform_device *pdev)
+{
+       const struct of_device_id *match =
+               of_match_device(dove_pinctrl_of_match, &pdev->dev);
+       int ret;
+
+       if (match)
+               pdev->dev.platform_data = match->data;
+
+       /*
+        * General MPP Configuration Register is part of pdma registers.
+        * grab clk to make sure it is clocked.
+        */
+       pdma_clk = clk_get_sys("dove-pdma", NULL);
First there is something really weird with the name of this
clock. Atleast call the variable holding the clk something
apropriate like just "clk".

Second why are you fetching a sys clock instead of using the clkdev
device binding in the clock tree so you could say:

clk = clk_get(&pdev->dev, NULL);
+       clk_prepare_enable(pdma_clk);
Good!
+       ret = mvebu_pinctrl_probe(pdev);
+       if (!ret)
+               return 0;
+
+       clk_disable_unprepare(pdma_clk);
+       clk_put(pdma_clk);
+       return ret;
+}
+
+static int __devexit dove_pinctrl_remove(struct platform_device *pdev)
+{
+       int ret;
+
+       ret = mvebu_pinctrl_remove(pdev);
+       if (!IS_ERR(pdma_clk)) {
+               clk_disable_unprepare(pdma_clk);
+               clk_put(pdma_clk);
+       }
You don't need this (!IS_ERR()) clause, look in yout probe function:
you bail out if the clock is not found.

The rest looks good... atleast now, but I'm low on coffee FTM.

Yours,
Linus Walleij

Re: [PATCH 03/11] pinctrl: mvebu: kirkwood pinctrl driver

From: Linus Walleij <hidden>
Date: 2012-08-20 13:49:05

On Sat, Aug 11, 2012 at 2:56 PM, Sebastian Hesselbarth
[off-list ref] wrote:
This patch adds a SoC specific pinctrl driver for Marvell Kirkwood SoCs
plus DT binding documentation. This driver will use the mvebu pinctrl
driver core.
Thanks for working on Kirkwood. Love this platform.
quoted hunk
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index cd3d827..361f513 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -596,6 +596,7 @@ config ARCH_KIRKWOOD
        select GENERIC_CLOCKEVENTS
        select NEED_MACH_IO_H
        select PLAT_ORION
+       select PINCTRL
select PINCTRL_KIRKWOOD too I think.
Then it's just automatic.
quoted hunk
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index e2427eb..1f84090 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -147,7 +147,7 @@ config PINCTRL_COH901

 config PINCTRL_MVEBU
        bool "Marvell SoC pin controller drivers"
-       depends on ARCH_MVEBU || ARCH_DOVE
+       depends on ARCH_MVEBU || ARCH_DOVE || ARCH_KIRKWOOD
As stated elsewhere I think this should be
depends on PLAT_ORION
+config PINCTRL_KIRKWOOD
+       bool "Support for Marvell Kirkwood SoCs"
+       depends on PINCTRL_MVEBU
depends on ARCH_KIRKWOOD
select PINCTRL_MVEBU

(...)
quoted hunk
diff --git a/drivers/pinctrl/pinctrl-kirkwood.c b/drivers/pinctrl/pinctrl-kirkwood.c
+static struct mvebu_pinctrl_soc_info kirkwood_pinctrl_info;
+
+static struct of_device_id kirkwood_pinctrl_of_match[] __devinitdata = {
+       { .compatible = "marvell,88f6180-pinctrl",
+                                         .data = (void *)VARIANT_MV88F6180 },
+       { .compatible = "marvell,88f6190-pinctrl",
+                                         .data = (void *)VARIANT_MV88F6190 },
+       { .compatible = "marvell,88f6192-pinctrl",
+                                         .data = (void *)VARIANT_MV88F6192 },
+       { .compatible = "marvell,88f6281-pinctrl",
+                                         .data = (void *)VARIANT_MV88F6281 },
+       { .compatible = "marvell,88f6282-pinctrl",
+                                         .data = (void *)VARIANT_MV88F6282 },
+       { }
+};
I'm thinking this variant should maybe be an enum... unless it is
strongly established somewhere in Orion/Marvell stuff.
+static int __devinit kirkwood_pinctrl_probe(struct platform_device *pdev)
+{
+       struct mvebu_pinctrl_soc_info *soc = &kirkwood_pinctrl_info;
+       const struct of_device_id *match =
+               of_match_device(kirkwood_pinctrl_of_match, &pdev->dev);
+
+       if (match) {
+               soc->variant = (unsigned)match->data & 0xff;
+               switch (soc->variant) {
+               case VARIANT_MV88F6180:
+                       soc->controls = mv88f6180_mpp_controls;
+                       soc->ncontrols = ARRAY_SIZE(mv88f6180_mpp_controls);
+                       soc->modes = mv88f6xxx_mpp_modes;
+                       soc->nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes);
+                       soc->gpioranges = mv88f6180_gpio_ranges;
+                       soc->ngpioranges = ARRAY_SIZE(mv88f6180_gpio_ranges);
+                       break;
+               case VARIANT_MV88F6190:
+               case VARIANT_MV88F6192:
+                       soc->controls = mv88f619x_mpp_controls;
+                       soc->ncontrols = ARRAY_SIZE(mv88f619x_mpp_controls);
+                       soc->modes = mv88f6xxx_mpp_modes;
+                       soc->nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes);
+                       soc->gpioranges = mv88f619x_gpio_ranges;
+                       soc->ngpioranges = ARRAY_SIZE(mv88f619x_gpio_ranges);
+                       break;
+               case VARIANT_MV88F6281:
+               case VARIANT_MV88F6282:
+                       soc->controls = mv88f628x_mpp_controls;
+                       soc->ncontrols = ARRAY_SIZE(mv88f628x_mpp_controls);
+                       soc->modes = mv88f6xxx_mpp_modes;
+                       soc->nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes);
+                       soc->gpioranges = mv88f628x_gpio_ranges;
+                       soc->ngpioranges = ARRAY_SIZE(mv88f628x_gpio_ranges);
+                       break;
+               }
+               pdev->dev.platform_data = soc;
+       }
+       return mvebu_pinctrl_probe(pdev);
+}
This is looking real good, clean & nice.

No further comments on this driver.

Yours,
Linus Walleij

Re: [PATCH 01/11] pinctrl: mvebu: pinctrl driver core

From: Linus Walleij <hidden>
Date: 2012-08-20 14:11:38

On Sat, Aug 11, 2012 at 2:56 PM, Sebastian Hesselbarth
[off-list ref] wrote:
This patch adds a pinctrl driver core for Marvell SoCs plus DT
binding documentation. This core driver will be used by SoC family
specific drivers, i.e. Armada XP, Armada 370, Dove, Kirkwood, aso.
(...)
+config PINCTRL_MVEBU
+       bool "Marvell SoC pin controller drivers"
+       depends on ARCH_MVEBU
So altering earlier statements I suspect this should be simply:

depends on PLAT_ORION

Yours,
Linus Walleij

Re: [PATCH 01/11] pinctrl: mvebu: pinctrl driver core

From: Linus Walleij <hidden>
Date: 2012-08-20 14:18:18

On Mon, Aug 20, 2012 at 11:46 AM, Sebastian Hesselbarth
[off-list ref] wrote:
On 8/20/12, Linus Walleij [off-list ref] wrote:
quoted
Are you taking this patch series through some Marvell tree or do you want
me to carry it in the pinctrl tree?
I think it would be better to take it through the Marvell tree of Jason
Cooper. It is only for Marvell SoCs anyway.
OK.
quoted
There is some other "variant" field elsewhere that is
a u8, is this correct? In this and the other case, should
this "variant" rather be an enum?
I'll review the variant types but inside pinctrl-mvebu variant
is used as a bit mask to distinguish different variants. Anyway,
they should always be the same size.
Aha bitmask, seems you can only have 8 different variants of
the Marvell's then?
quoted
Is it possible to use devm_* managed devm_kzalloc() for this map
so you don't need to free it explicitly?

(Maybe not, just checking.)
Hmm, I guess not as I thought I've read not to use devm_kfree when
you allocate _and_ free stuff on runtime without removing the device
itself, right?
You're right.
quoted
So, there will never be > 256 pins on a Marvell platform?
Well, with all current platforms we are well below 100. I guess
256 max (muxable) pins will be enough.
OK.
quoted
quoted
+ * struct mvebu_mpp_ctrl_setting - describe a mpp ctrl setting
+ * @val: ctrl setting value
It is not obvious to me what this means, it it possible to elaborate
on how this member is defined and used?
Well, I see if I can clarify the description but wrt the datasheet it
_should_ be quite obvious.
I mainly worry about being able to read the code and figure out
what's going on, if the datasheet is vital then pls include some
link to it or so in the header of the file (but preferrably the code
should speak for itself).
quoted
quoted
+ * @variant: (optional) variant identifier mask
This thing again, there are lots of "variants" around here.
Is it a candidate for an enum?
As it is a mask, I don't think enum fits here.
OK. No big deal anyway.
In some internal review with Andrew I also added a spinlock to
mvebu_pinconf_get/_set that will protect all calls to generic and specific
_get/_set register accesses. Moreover, I replaced clk_get_sys in pinctrl-dove
with the devm_ counterpart and removed the explicit clk_put.
I had some separate comments on that clk thing...
Anyway, looking forward to v2, this is progressing quickly
I think.

Yours,
Linus Walleij

Re: [PATCH 04/11] pinctrl: mvebu: add pinctrl driver for Armada 370

From: Linus Walleij <hidden>
Date: 2012-08-20 14:25:09

On Sat, Aug 11, 2012 at 2:56 PM, Sebastian Hesselbarth
[off-list ref] wrote:
This pinctrl driver is not a full-blown pinctrl driver from scratch:
it relies on the common pinctrl-mvebu driver, which is used for all
Marvell EBU SoCs.
Good!
+config PINCTRL_ARMADA_370
+       bool "Support for Marvell Armada 370 SoCs"
+       depends on PINCTRL_MVEBU
+       depends on MACH_ARMADA_370_XP
select PINCTRL_MVEBU simply?

And then have the Armada Kconfig

select PINCTRL
select PINCTRL_ARMADA_370

This machine doesn't seem to depend in the MVEBU driver, I guess it's
the same ARCH as something else, oh well. Still suspect the
MVEBU driver should depend on PLAT_ORION until proven
wrong.

(...)
+static int __devinit armada_370_pinctrl_probe(struct platform_device *pdev)
+{
+       struct mvebu_pinctrl_soc_info *soc = &armada_370_pinctrl_info;
+
+       soc->variant = 0;
Shouldn't this be a #defined thing or something. "variant 0" doesn't
tell me much.

No further comments, looking good.

Yours,
Linus Walleij

Re: [PATCH 05/11] pinctrl: mvebu: add pinctrl driver for Armada XP

From: Linus Walleij <hidden>
Date: 2012-08-20 14:26:29

On Sat, Aug 11, 2012 at 2:56 PM, Sebastian Hesselbarth
[off-list ref] wrote:
From: Thomas Petazzoni <redacted>

This pinctrl driver is not a full-blown pinctrl driver from scratch:
it relies on the common pinctrl-mvebu driver, which is used for all
Marvell EBU SoCs.

Signed-off-by: Thomas Petazzoni <redacted>
Same comments as on the previous driver, no further comments,
and looking good.

Yours,
Linus Walleij

Re: [PATCH 06/11] ARM: mvebu: add pinctrl device in DT for Armada 370/XP SoCs

From: Linus Walleij <hidden>
Date: 2012-08-20 14:27:10

On Sat, Aug 11, 2012 at 2:56 PM, Sebastian Hesselbarth
[off-list ref] wrote:
From: Thomas Petazzoni <redacted>

The Armada 370 and XP SoCs have configurable muxing for a certain
number of their pins, controlled through a pinctrl driver.

The 'compatible' property is defined in the SoC-specific .dtsi files,
since the compatible string identifies the number of pins and other
SoC-specific properties.

Signed-off-by: Thomas Petazzoni <redacted>
FWIW:
Acked-by: Linus Walleij <redacted>

Yours,
Linus Walleij

Re: [PATCH 07/11] ARM: mvebu: Add pinctrl support to Armada XP SoCs

From: Linus Walleij <hidden>
Date: 2012-08-20 14:27:44

On Sat, Aug 11, 2012 at 2:56 PM, Sebastian Hesselbarth
[off-list ref] wrote:
From: Thomas Petazzoni <redacted>

This commits adds the necessary device tree information to define the
compatible property for the pinctrl driver instance of Armada XP SoCs.

Until now, the device tree representation considered the Armada XP as
a single SoC. But in fact, there are three different SoCs in the
Armada XP families, with different number of CPU cores, different
number of Ethernet interfaces... and different number of muxable pins
or functions. We therefore introduce three armada-xp-mv78xx0.dtsi for
the three SoCs of the Armada XP family. The current armada-xp-db.dts
evaluation board uses the MV78460 variant of the SoC.

Signed-off-by: Thomas Petazzoni <redacted>
FWIW:
Acked-by: Linus Walleij <redacted>

Yours,
Linus Walleij

Re: [PATCH 08/11] ARM: mvebu: Add pinctrl support to Armada 370 SoC

From: Linus Walleij <hidden>
Date: 2012-08-20 14:28:04

On Sat, Aug 11, 2012 at 2:56 PM, Sebastian Hesselbarth
[off-list ref] wrote:
From: Thomas Petazzoni <redacted>

This commits adds the necessary device tree information to define the
compatible property for the pinctrl driver instance of Armada 370 SoC.

Signed-off-by: Thomas Petazzoni <redacted>
FWIW:
Acked-by: Linus Walleij <redacted>

Yours,
Linus Walleij

Re: [PATCH 09/11] ARM: mvebu: adjust Armada XP evaluation board DTS

From: Linus Walleij <hidden>
Date: 2012-08-20 14:28:21

On Sat, Aug 11, 2012 at 2:56 PM, Sebastian Hesselbarth
[off-list ref] wrote:
From: Thomas Petazzoni <redacted>

The Armada XP evaluation board is based on the MV78460 Armava XP
SoC. Now that we have separate .dtsi files for the three different
SoCs of the Armada XP family, use the appropriate one as include for
the Armada XP evaluation board .dts file.

Signed-off-by: Thomas Petazzoni <redacted>
FWIW:
Acked-by: Linus Walleij <redacted>

Yours,
Linus Walleij

Re: [PATCH 10/11] arm: mvebu: enable PINCTRL usage

From: Linus Walleij <hidden>
Date: 2012-08-20 14:29:58

On Sat, Aug 11, 2012 at 2:56 PM, Sebastian Hesselbarth
[off-list ref] wrote:
From: Thomas Petazzoni <redacted>

Now that we have a proper pinctrl driver for Marvell EBU platforms,
enable PINCTRL support in ARCH_MVEBU.

Signed-off-by: Thomas Petazzoni <redacted>
(...)
quoted hunk
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 361f513..95317a9 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -573,6 +573,7 @@ config ARCH_MVEBU
        select GENERIC_IRQ_CHIP
        select IRQ_DOMAIN
        select COMMON_CLK
+       select PINCTRL
        help
          Support for the Marvell SoC Family with device tree support
So this symbol collects all the DT-migrated platforms?

Probably OK but want to figure out if the PLAT_NOMADIK symbol
is applicable.

Yours,
Linus Walleij

Re: [PATCH 11/11] arm: mvebu: add pinctrl support in defconfig

From: Linus Walleij <hidden>
Date: 2012-08-20 14:31:27

On Sat, Aug 11, 2012 at 2:56 PM, Sebastian Hesselbarth
[off-list ref] wrote:
quoted hunk
diff --git a/arch/arm/configs/mvebu_defconfig b/arch/arm/configs/mvebu_defconfig
index 2e86b31..cb07e64 100644
--- a/arch/arm/configs/mvebu_defconfig
+++ b/arch/arm/configs/mvebu_defconfig
@@ -21,6 +21,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_PINCTRL_ARMADA_370=y
+CONFIG_PINCTRL_ARMADA_XP=y
If the system is not even booting without pinctrl you should
(IMHO) select these from the machine's Kconfig entry insteaf.

If they boot fine without I'm fine with this ... the arch maintainer
gets to choose anyway.

Yours,
Linus Walleij

Re: [PATCH 02/11] pinctrl: mvebu: dove pinctrl driver

From: Sebastian Hesselbarh <sebastian.hesselbarth@gmail.com>
Date: 2012-08-20 14:43:10

On 08/20/2012 03:43 PM, Linus Walleij wrote:
quoted
  config PINCTRL_MVEBU
         bool "Marvell SoC pin controller drivers"
-       depends on ARCH_MVEBU
+       depends on ARCH_MVEBU || ARCH_DOVE
Hmmmm.

Shouldn't this thing rather be:
depends on PLAT_ORION
else you end up lining up all Marvell machines here...
 > (...)
 >> +config PINCTRL_DOVE
 >> +       bool "Support for Marvell Dove SoCs"
 >> +       depends on PINCTRL_MVEBU
 >
 > Shouldn't this rather be:
 >
 > depends on ARCH_DOVE
 > select PINCTRL_MVEBU
 >
 > since you call down into the mvebu driver, it definatley needs
 > to select that.

Yes, this is a bit difficult but PLAT_ORION is basically all existing
Marvell SoCs of the Orion family. Armada 370/XP are two new SoCs
_and_ the approach to combine all into one mach-mvebu. The pinctrl
driver will only be made available to mach-mvebu as I am already close
to have at least mach-dove ported over.

After the review of Andrew, I already changed the Kconfig to have the 
structure you are proposing.
quoted
+#define  DOVE_AU0_AC97_SEL             (1<<  16)
It is way cleaner to say:
#include<linux/bitops.h>
#define  DOVE_AU0_AC97_SEL             BIT(16)
Ok.
Same comments about the magic numbers as in the review of the first
patch.
I just agree with all of these comments and will work them in.
quoted
+       if (ctrl->pid == 24)
+               mask = DOVE_CAM_GPIO_SEL;
+       else if (ctrl->pid == 40)
+               mask = DOVE_SD0_GPIO_SEL;
+       else if (ctrl->pid == 46)
+               mask = DOVE_SD1_GPIO_SEL;
+       else if (ctrl->pid == 58)
+               mask = DOVE_SPI_GPIO_SEL;
+       else if (ctrl->pid == 62)
+               mask = DOVE_UART1_GPIO_SEL;
+       else
+               return -EINVAL;
Magic numbers, atleast provide a comment on what is so special about
these pins, and can you use a switch() statement instead?
Sure.
quoted
+static int dove_audio1_ctrl_gpio_req(struct mvebu_mpp_ctrl *ctrl, u8 pid)
+{
+       unsigned long config;
+
+       dove_audio1_ctrl_get(ctrl,&config);
+
+       switch (config) {
+       /* mode 0x00 i2s1/spdifo : no gpio */
+       /* mode 0x0c ssp/spdifo  : no gpio */
+       /* mode 0x0f ssp/twsi    : no gpio */
+       case 0x00:
+       case 0x0c:
+       case 0x0f:
+               return -ENOTSUPP;
Nice with the comments (also before the function),
now I understand what's happening, this is pretty OK,
I would have put the comments on the same
line as the magic number but whatever.

However you could just delete these lines and let them
fall through to -ENOTSUPP at the bottom.
Ok.
quoted
+/* mpp[52:57] has gpio pins capable of in and out */
+static int dove_audio1_ctrl_gpio_dir(struct mvebu_mpp_ctrl *ctrl, u8 pid,
+                               bool input)
+{
+       return 0;
+}
So should this not return a -ENOTSUPP for
pin<  52 || pin>  57?
Well, as pinctrl-mvebu and pinctrl core are already checking for pin
ranges, I think it's ok not to do it here again. But I don't have a
strong opinion about that.
quoted
+       /*
+        * General MPP Configuration Register is part of pdma registers.
+        * grab clk to make sure it is clocked.
+        */
+       pdma_clk = clk_get_sys("dove-pdma", NULL);
First there is something really weird with the name of this
clock. Atleast call the variable holding the clk something
apropriate like just "clk".

Second why are you fetching a sys clock instead of using the clkdev
device binding in the clock tree so you could say:

clk = clk_get(&pdev->dev, NULL);
pdma is the name of the clock gating control bit used in DS, IIRC it
stands for Peripheral DMA. Moreover, as I already mentioned it is now
using devm_clk_get. I think the time the pinctrl-dove driver patch was
posted there was no clock binding in 3.6.
quoted
+static int __devexit dove_pinctrl_remove(struct platform_device *pdev)
+{
+       int ret;
+
+       ret = mvebu_pinctrl_remove(pdev);
+       if (!IS_ERR(pdma_clk)) {
+               clk_disable_unprepare(pdma_clk);
+               clk_put(pdma_clk);
+       }
You don't need this (!IS_ERR()) clause, look in yout probe function:
you bail out if the clock is not found.
Agree.

Sebastian

Re: [PATCH 01/11] pinctrl: mvebu: pinctrl driver core

From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: 2012-08-20 14:51:30

On 08/20/2012 04:18 PM, Linus Walleij wrote:
quoted
I'll review the variant types but inside pinctrl-mvebu variant
is used as a bit mask to distinguish different variants. Anyway,
they should always be the same size.
Aha bitmask, seems you can only have 8 different variants of
the Marvell's then?
Only 8 different variants of one SoC! Currently, there are 5 for
Kirkwood, none for Dove. I think there are two more Kirkwood's that
never appeared in public, but it is still < 8.
quoted
Well, I see if I can clarify the description but wrt the datasheet it
_should_ be quite obvious.
I mainly worry about being able to read the code and figure out
what's going on, if the datasheet is vital then pls include some
link to it or so in the header of the file (but preferrably the code
should speak for itself).
Ok, I clarify whats meant by mvebu_*_ctrl/ctrl_setting/mode. I am not
that happy with that names either, but honestly pinctrl core already
took all names that I'd have chosen. Therefore, I chose some that do
not interfere with pinctrl core as the meaning is different.

Sebastian

Re: [PATCH 11/11] arm: mvebu: add pinctrl support in defconfig

From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: 2012-08-20 14:54:37

On 08/20/2012 04:31 PM, Linus Walleij wrote:
On Sat, Aug 11, 2012 at 2:56 PM, Sebastian Hesselbarth
[off-list ref]  wrote:
quoted
+CONFIG_PINCTRL_ARMADA_370=y
+CONFIG_PINCTRL_ARMADA_XP=y
If the system is not even booting without pinctrl you should
(IMHO) select these from the machine's Kconfig entry insteaf.
I don't have a strong opinion on this but I think most systems
will boot just fine without pinctrl. The basic stuff is set up
by u-boot. Anyway, I think we should enable pinctrl for each soc
by default.

Sebastian

Re: [PATCH 04/11] pinctrl: mvebu: add pinctrl driver for Armada 370

From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: 2012-08-20 16:48:39

On 08/20/2012 04:25 PM, Linus Walleij wrote:
quoted
+config PINCTRL_ARMADA_370
+       bool "Support for Marvell Armada 370 SoCs"
+       depends on PINCTRL_MVEBU
+       depends on MACH_ARMADA_370_XP
select PINCTRL_MVEBU simply?

And then have the Armada Kconfig

select PINCTRL
select PINCTRL_ARMADA_370
Linus, Thomas, Gregory,

this is really difficult here ;) I thought I could just add PINCTRL_DOVE
to MACH_DOVE inside ARCH_MVEBU, PINCTRL_KIRKWOOD to MACH_KIRKWOOD, aso.
But there is a common MACH_ARMADA_370_XP for both 370 and XP obviously.

If it is ok for you I will add both PINCTRL_ stubs to the Kconfig and
you work it out if you ever have two distinct MACHs? Or it could remain
selectable in pinctrl/Kconfig but that will then be different with the
other stubs.

Sebastian

Re: [PATCH 04/11] pinctrl: mvebu: add pinctrl driver for Armada 370

From: Thomas Petazzoni <hidden>
Date: 2012-08-20 17:36:42

Le Mon, 20 Aug 2012 18:48:32 +0200,
Sebastian Hesselbarth [off-list ref] a ?crit :
this is really difficult here ;) I thought I could just add PINCTRL_DOVE
to MACH_DOVE inside ARCH_MVEBU, PINCTRL_KIRKWOOD to MACH_KIRKWOOD, aso.
But there is a common MACH_ARMADA_370_XP for both 370 and XP obviously.

If it is ok for you I will add both PINCTRL_ stubs to the Kconfig and
you work it out if you ever have two distinct MACHs? Or it could remain
selectable in pinctrl/Kconfig but that will then be different with the
other stubs.
In order to keep the consistency with other SoC families, maybe we can
split the 370 and XP options in two separate MACH_ARMADA_370 and
MACH_ARMADA_XP. So, in the ideal world, once all Marvell EBU SoCs are
converted to DT+mach-mvebu, we should have:

 *) arch/arm/Kconfig defines MACH_MVEBU

 *) arch/arm/mach-mvebu/Kconfig defines MACH_KIRKWOOD, MACH_DOVE,
    MACH_MX78X00, MACH_ARMADA_370, MACH_ARMADA_XP, MACH_ORION5X

Then, an user is free to build a single kernel image that supports all,
or a selection of the supported Marvell EBU SoCs.

Would that be ok with you?

If that's fine with you, then I would prefer if we keep the single
MACH_ARMADA_370_XP symbol for now, so that your pinctrl set of patches
does not depend on something else. We would do the small Kconfig option
refactoring as a follow-up set of patches. Thoughts?

Best regards,

Thomas
-- 
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

Re: [PATCH 11/11] arm: mvebu: add pinctrl support in defconfig

From: Thomas Petazzoni <hidden>
Date: 2012-08-20 17:37:58

Le Mon, 20 Aug 2012 16:54:27 +0200,
Sebastian Hesselbarth [off-list ref] a ?crit :
On 08/20/2012 04:31 PM, Linus Walleij wrote:
quoted
On Sat, Aug 11, 2012 at 2:56 PM, Sebastian Hesselbarth
[off-list ref]  wrote:
quoted
+CONFIG_PINCTRL_ARMADA_370=y
+CONFIG_PINCTRL_ARMADA_XP=y
If the system is not even booting without pinctrl you should
(IMHO) select these from the machine's Kconfig entry insteaf.
I don't have a strong opinion on this but I think most systems
will boot just fine without pinctrl. The basic stuff is set up
by u-boot. Anyway, I think we should enable pinctrl for each soc
by default.
Yes, the system boots fine without the pinctrl support. So I don't
think that MACH_ARMADA_370_XP should forcefully select the pinctrl
code, but it's nice to have the default defconfig for this platform
select the pinctrl support.

Best regards,

Thomas
-- 
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

Re: [PATCH 04/11] pinctrl: mvebu: add pinctrl driver for Armada 370

From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: 2012-08-20 18:01:59

On 08/20/2012 07:36 PM, Thomas Petazzoni wrote:
In order to keep the consistency with other SoC families, maybe we can
split the 370 and XP options in two separate MACH_ARMADA_370 and
MACH_ARMADA_XP. So, in the ideal world, once all Marvell EBU SoCs are
converted to DT+mach-mvebu, we should have:

  *) arch/arm/Kconfig defines MACH_MVEBU

  *) arch/arm/mach-mvebu/Kconfig defines MACH_KIRKWOOD, MACH_DOVE,
     MACH_MX78X00, MACH_ARMADA_370, MACH_ARMADA_XP, MACH_ORION5X

Then, an user is free to build a single kernel image that supports all,
or a selection of the supported Marvell EBU SoCs.

Would that be ok with you?
Yes!
If that's fine with you, then I would prefer if we keep the single
MACH_ARMADA_370_XP symbol for now, so that your pinctrl set of patches
does not depend on something else. We would do the small Kconfig option
refactoring as a follow-up set of patches. Thoughts?
Despite any objections, I will remove all arch/arm/*/Kconfig patches
from pinctrl patch set.

Sebastian

Re: [PATCH 02/11] pinctrl: mvebu: dove pinctrl driver

From: Thomas Petazzoni <hidden>
Date: 2012-08-20 18:31:37

Le Mon, 20 Aug 2012 15:43:11 +0200,
Linus Walleij [off-list ref] a ?crit :
quoted
 config PINCTRL_MVEBU
        bool "Marvell SoC pin controller drivers"
-       depends on ARCH_MVEBU
+       depends on ARCH_MVEBU || ARCH_DOVE
Hmmmm.

Shouldn't this thing rather be:

depends on PLAT_ORION

else you end up lining up all Marvell machines here...
When we started working on this, ARCH_MVEBU was not a PLAT_ORION
platform, because PLAT_ORION includes its own custom pinmux code, gpio
code, etc, and what we're trying to achieve with Sebastian is to clean
all this. Ultimately, our goal is to have all Orion, Kirkwood, Dove,
Discovery and Armada 370/XP supported in mach-mvebu, and therefore
plat-orion would most likely disappear.

In the mean time, a patch got accepted that separates PLAT_ORION for
PLAT_ORION_LEGACY, and therefore MACH_MVEBU now selects PLAT_ORION to
access things that are still useful (address decoding code) while all
other platforms select PLAT_ORION_LEGACY to get the old pinmux code,
old gpio code, etc. All this is very much a work in progress.

Best regards,

Thomas
-- 
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

Re: [PATCH 04/11] pinctrl: mvebu: add pinctrl driver for Armada 370

From: Thomas Petazzoni <hidden>
Date: 2012-08-20 18:52:17

Le Mon, 20 Aug 2012 20:01:51 +0200,
Sebastian Hesselbarth [off-list ref] a ?crit :
quoted
If that's fine with you, then I would prefer if we keep the single
MACH_ARMADA_370_XP symbol for now, so that your pinctrl set of
patches does not depend on something else. We would do the small
Kconfig option refactoring as a follow-up set of patches. Thoughts?
Despite any objections, I will remove all arch/arm/*/Kconfig patches
from pinctrl patch set.
Ok, fine with me, but we'll have to send separate patches for those,
then.

Thanks!

Thomas
-- 
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

Re: [PATCH 04/11] pinctrl: mvebu: add pinctrl driver for Armada 370

From: Gregory CLEMENT <hidden>
Date: 2012-08-21 07:12:53

On 08/20/2012 07:36 PM, Thomas Petazzoni wrote:
Le Mon, 20 Aug 2012 18:48:32 +0200,
Sebastian Hesselbarth [off-list ref] a ?crit :
quoted
this is really difficult here ;) I thought I could just add PINCTRL_DOVE
to MACH_DOVE inside ARCH_MVEBU, PINCTRL_KIRKWOOD to MACH_KIRKWOOD, aso.
But there is a common MACH_ARMADA_370_XP for both 370 and XP obviously.

If it is ok for you I will add both PINCTRL_ stubs to the Kconfig and
you work it out if you ever have two distinct MACHs? Or it could remain
selectable in pinctrl/Kconfig but that will then be different with the
other stubs.
In order to keep the consistency with other SoC families, maybe we can
split the 370 and XP options in two separate MACH_ARMADA_370 and
MACH_ARMADA_XP. So, in the ideal world, once all Marvell EBU SoCs are
converted to DT+mach-mvebu, we should have:

 *) arch/arm/Kconfig defines MACH_MVEBU

 *) arch/arm/mach-mvebu/Kconfig defines MACH_KIRKWOOD, MACH_DOVE,
    MACH_MX78X00, MACH_ARMADA_370, MACH_ARMADA_XP, MACH_ORION5X

Then, an user is free to build a single kernel image that supports all,
or a selection of the supported Marvell EBU SoCs.
I agree with Thomas
Thomas

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

[PATCH v2 0/9] pinctrl: mvebu: pinctrl driver

From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: 2012-08-22 08:22:48

This patch set adds a core pinctrl driver for Marvell MVEBU SoCs and
SoC specific stubs for Armada 370, Armada XP, Dove, and Kirkwood.
The SoC specific stubs use the pinctrl-mvebu core driver that handles
pinctrl API and register accesses for common pinctrl registers.

As especially Dove has some pinctrl registers that do not match the
common pinctrl register layout the core driver has been extended by
some callbacks to allow uncommon Dove pinctrl registers.

DT binding documentation is added for all supported SoCs but as
Dove and Kirkwood are not yet ready for full DT support, the pinctrl
driver is only activated for Armada 370 and XP.

The driver has been tested on Dove, 88f6281 variant of Kirkwood,
Armada 370, and XP.

Changelog:
v2:
- rebased on git://git.infradead.org/users/jcooper/linux.git boards-for-3.7
- removed arch/arm/*/Kconfig patches that enable PINCTRL_ on MACH_MVEBU
  (those will be sent as a different patch set)
- reworked patches wrt reviews from Andrew Lunn and Linus Walleij

Sebastian Hesselbarth (3):
  pinctrl: mvebu: pinctrl driver core
  pinctrl: mvebu: dove pinctrl driver
  pinctrl: mvebu: kirkwood pinctrl driver

Thomas Petazzoni (6):
  pinctrl: mvebu: add pinctrl driver for Armada 370
  pinctrl: mvebu: add pinctrl driver for Armada XP
  ARM: mvebu: add pinctrl device in DT for Armada 370/XP SoCs
  ARM: mvebu: Add pinctrl support to Armada XP SoCs
  ARM: mvebu: Add pinctrl support to Armada 370 SoC
  ARM: mvebu: adjust Armada XP evaluation board DTS

 .../pinctrl/marvell,armada-370-pinctrl.txt         |   95 +++
 .../bindings/pinctrl/marvell,armada-xp-pinctrl.txt |  100 +++
 .../bindings/pinctrl/marvell,dove-pinctrl.txt      |   72 ++
 .../bindings/pinctrl/marvell,kirkwood-pinctrl.txt  |  279 +++++++
 .../bindings/pinctrl/marvell,mvebu-pinctrl.txt     |   45 ++
 arch/arm/Kconfig                                   |    1 +
 arch/arm/boot/dts/armada-370-xp.dtsi               |    7 +
 arch/arm/boot/dts/armada-370.dtsi                  |    4 +
 arch/arm/boot/dts/armada-xp-db.dts                 |    4 +-
 arch/arm/boot/dts/armada-xp-mv78230.dtsi           |   27 +
 arch/arm/boot/dts/armada-xp-mv78260.dtsi           |   27 +
 arch/arm/boot/dts/armada-xp-mv78460.dtsi           |   27 +
 drivers/pinctrl/Kconfig                            |   22 +
 drivers/pinctrl/Makefile                           |    5 +
 drivers/pinctrl/pinctrl-armada-370.c               |  421 +++++++++++
 drivers/pinctrl/pinctrl-armada-xp.c                |  468 ++++++++++++
 drivers/pinctrl/pinctrl-dove.c                     |  622 ++++++++++++++++
 drivers/pinctrl/pinctrl-kirkwood.c                 |  462 ++++++++++++
 drivers/pinctrl/pinctrl-mvebu.c                    |  761 ++++++++++++++++++++
 drivers/pinctrl/pinctrl-mvebu.h                    |  192 +++++
 20 files changed, 3639 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt
 create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt
 create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt
 create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt
 create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt
 create mode 100644 arch/arm/boot/dts/armada-xp-mv78230.dtsi
 create mode 100644 arch/arm/boot/dts/armada-xp-mv78260.dtsi
 create mode 100644 arch/arm/boot/dts/armada-xp-mv78460.dtsi
 create mode 100644 drivers/pinctrl/pinctrl-armada-370.c
 create mode 100644 drivers/pinctrl/pinctrl-armada-xp.c
 create mode 100644 drivers/pinctrl/pinctrl-dove.c
 create mode 100644 drivers/pinctrl/pinctrl-kirkwood.c
 create mode 100644 drivers/pinctrl/pinctrl-mvebu.c
 create mode 100644 drivers/pinctrl/pinctrl-mvebu.h
---
Cc: Thomas Petazzoni <redacted>
Cc: Grant Likely <redacted>
Cc: Rob Herring <redacted>
Cc: Rob Landley <redacted>
Cc: Russell King <redacted>
Cc: Lior Amsalem <redacted>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory CLEMENT <redacted>
Cc: Ben Dooks <redacted>
Cc: Linus Walleij <redacted>
Cc: Stephen Warren <redacted>
Cc: devicetree-discuss at lists.ozlabs.org
Cc: linux-doc at vger.kernel.org
Cc: linux-kernel at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
-- 
1.7.10.4

[PATCH v2 3/9] pinctrl: mvebu: kirkwood pinctrl driver

From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: 2012-08-22 08:23:00

This patch adds a SoC specific pinctrl driver for Marvell Kirkwood SoCs
plus DT binding documentation. This driver will use the mvebu pinctrl
driver core.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
v2:
- restructured pinctrl/Kconfig to hide pinctrl driver as it will be
  always selected by arch/arm/mach-mvebu/Kconfig
- use enum for kirkwood variants instead of defines

Cc: Thomas Petazzoni <redacted>
Cc: Grant Likely <redacted>
Cc: Rob Herring <redacted>
Cc: Rob Landley <redacted>
Cc: Russell King <redacted>
Cc: Lior Amsalem <redacted>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory CLEMENT <redacted>
Cc: Ben Dooks <redacted>
Cc: Linus Walleij <redacted>
Cc: Stephen Warren <redacted>
Cc: devicetree-discuss at lists.ozlabs.org
Cc: linux-doc at vger.kernel.org
Cc: linux-kernel at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
---
 .../bindings/pinctrl/marvell,kirkwood-pinctrl.txt  |  279 ++++++++++++
 drivers/pinctrl/Kconfig                            |    4 +
 drivers/pinctrl/Makefile                           |    1 +
 drivers/pinctrl/pinctrl-kirkwood.c                 |  462 ++++++++++++++++++++
 4 files changed, 746 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt
 create mode 100644 drivers/pinctrl/pinctrl-kirkwood.c
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt
new file mode 100644
index 0000000..361bccb
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt
@@ -0,0 +1,279 @@
+* Marvell Kirkwood SoC pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "marvell,88f6180-pinctrl",
+              "marvell,88f6190-pinctrl", "marvell,88f6192-pinctrl",
+              "marvell,88f6281-pinctrl", "marvell,88f6282-pinctrl"
+
+This driver supports all kirkwood variants, i.e. 88f6180, 88f619x, and 88f628x.
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+* Marvell Kirkwood 88f6180
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, nand(io2), spi(cs)
+mpp1          1        gpo, nand(io3), spi(mosi)
+mpp2          2        gpo, nand(io4), spi(sck)
+mpp3          3        gpo, nand(io5), spi(miso)
+mpp4          4        gpio, nand(io6), uart0(rxd), ptp(clk)
+mpp5          5        gpo, nand(io7), uart0(txd), ptp(trig)
+mpp6          6        sysrst(out), spi(mosi), ptp(trig)
+mpp7          7        gpo, pex(rsto), spi(cs), ptp(trig)
+mpp8          8        gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk),
+                       mii(col)
+mpp9          9        gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq),
+                       mii(crs)
+mpp10         10       gpo, spi(sck), uart0(txd), ptp(trig)
+mpp11         11       gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq),
+                       ptp-2(trig)
+mpp12         12       gpo, sdio(clk)
+mpp13         13       gpio, sdio(cmd), uart1(txd)
+mpp14         14       gpio, sdio(d0), uart1(rxd), mii(col)
+mpp15         15       gpio, sdio(d1), uart0(rts), uart1(txd)
+mpp16         16       gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs)
+mpp17         17       gpio, sdio(d3)
+mpp18         18       gpo, nand(io0)
+mpp19         19       gpo, nand(io1)
+mpp20         20       gpio, mii(rxerr)
+mpp21         21       gpio, audio(spdifi)
+mpp22         22       gpio, audio(spdifo)
+mpp23         23       gpio, audio(rmclk)
+mpp24         24       gpio, audio(bclk)
+mpp25         25       gpio, audio(sdo)
+mpp26         26       gpio, audio(lrclk)
+mpp27         27       gpio, audio(mclk)
+mpp28         28       gpio, audio(sdi)
+mpp29         29       gpio, audio(extclk)
+
+* Marvell Kirkwood 88f6190
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, nand(io2), spi(cs)
+mpp1          1        gpo, nand(io3), spi(mosi)
+mpp2          2        gpo, nand(io4), spi(sck)
+mpp3          3        gpo, nand(io5), spi(miso)
+mpp4          4        gpio, nand(io6), uart0(rxd), ptp(clk)
+mpp5          5        gpo, nand(io7), uart0(txd), ptp(trig), sata0(act)
+mpp6          6        sysrst(out), spi(mosi), ptp(trig)
+mpp7          7        gpo, pex(rsto), spi(cs), ptp(trig)
+mpp8          8        gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk),
+                       mii(col), mii-1(rxerr)
+mpp9          9        gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq),
+                       mii(crs), sata0(prsnt)
+mpp10         10       gpo, spi(sck), uart0(txd), ptp(trig)
+mpp11         11       gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq),
+                       ptp-2(trig), sata0(act)
+mpp12         12       gpo, sdio(clk)
+mpp13         13       gpio, sdio(cmd), uart1(txd)
+mpp14         14       gpio, sdio(d0), uart1(rxd), mii(col)
+mpp15         15       gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act)
+mpp16         16       gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs)
+mpp17         17       gpio, sdio(d3), sata0(prsnt)
+mpp18         18       gpo, nand(io0)
+mpp19         19       gpo, nand(io1)
+mpp20         20       gpio, ge1(txd0)
+mpp21         21       gpio, ge1(txd1), sata0(act)
+mpp22         22       gpio, ge1(txd2)
+mpp23         23       gpio, ge1(txd3), sata0(prsnt)
+mpp24         24       gpio, ge1(rxd0)
+mpp25         25       gpio, ge1(rxd1)
+mpp26         26       gpio, ge1(rxd2)
+mpp27         27       gpio, ge1(rxd3)
+mpp28         28       gpio, ge1(col)
+mpp29         29       gpio, ge1(txclk)
+mpp30         30       gpio, ge1(rxclk)
+mpp31         31       gpio, ge1(rxclk)
+mpp32         32       gpio, ge1(txclko)
+mpp33         33       gpo, ge1(txclk)
+mpp34         34       gpio, ge1(txen)
+mpp35         35       gpio, ge1(rxerr), sata0(act), mii(rxerr)
+
+* Marvell Kirkwood 88f6192
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, nand(io2), spi(cs)
+mpp1          1        gpo, nand(io3), spi(mosi)
+mpp2          2        gpo, nand(io4), spi(sck)
+mpp3          3        gpo, nand(io5), spi(miso)
+mpp4          4        gpio, nand(io6), uart0(rxd), ptp(clk), sata1(act)
+mpp5          5        gpo, nand(io7), uart0(txd), ptp(trig), sata0(act)
+mpp6          6        sysrst(out), spi(mosi), ptp(trig)
+mpp7          7        gpo, pex(rsto), spi(cs), ptp(trig)
+mpp8          8        gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk),
+                       mii(col), mii-1(rxerr), sata1(prsnt)
+mpp9          9        gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq),
+                       mii(crs), sata0(prsnt)
+mpp10         10       gpo, spi(sck), uart0(txd), ptp(trig), sata1(act)
+mpp11         11       gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq),
+                       ptp-2(trig), sata0(act)
+mpp12         12       gpo, sdio(clk)
+mpp13         13       gpio, sdio(cmd), uart1(txd)
+mpp14         14       gpio, sdio(d0), uart1(rxd), mii(col), sata1(prsnt)
+mpp15         15       gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act)
+mpp16         16       gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs),
+                       sata1(act)
+mpp17         17       gpio, sdio(d3), sata0(prsnt)
+mpp18         18       gpo, nand(io0)
+mpp19         19       gpo, nand(io1)
+mpp20         20       gpio, ge1(txd0), ts(mp0), tdm(tx0ql), audio(spdifi),
+                       sata1(act)
+mpp21         21       gpio, ge1(txd1), sata0(act), ts(mp1), tdm(rx0ql),
+                       audio(spdifo)
+mpp22         22       gpio, ge1(txd2), ts(mp2), tdm(tx2ql), audio(rmclk),
+                       sata1(prsnt)
+mpp23         23       gpio, ge1(txd3), sata0(prsnt), ts(mp3), tdm(rx2ql),
+                       audio(bclk)
+mpp24         24       gpio, ge1(rxd0), ts(mp4), tdm(spi-cs0), audio(sdo)
+mpp25         25       gpio, ge1(rxd1), ts(mp5), tdm(spi-sck), audio(lrclk)
+mpp26         26       gpio, ge1(rxd2), ts(mp6), tdm(spi-miso), audio(mclk)
+mpp27         27       gpio, ge1(rxd3), ts(mp7), tdm(spi-mosi), audio(sdi)
+mpp28         28       gpio, ge1(col), ts(mp8), tdm(int), audio(extclk)
+mpp29         29       gpio, ge1(txclk), ts(mp9), tdm(rst)
+mpp30         30       gpio, ge1(rxclk), ts(mp10), tdm(pclk)
+mpp31         31       gpio, ge1(rxclk), ts(mp11), tdm(fs)
+mpp32         32       gpio, ge1(txclko), ts(mp12), tdm(drx)
+mpp33         33       gpo, ge1(txclk), tdm(drx)
+mpp34         34       gpio, ge1(txen), tdm(spi-cs1)
+mpp35         35       gpio, ge1(rxerr), sata0(act), mii(rxerr), tdm(tx0ql)
+
+* Marvell Kirkwood 88f6281
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, nand(io2), spi(cs)
+mpp1          1        gpo, nand(io3), spi(mosi)
+mpp2          2        gpo, nand(io4), spi(sck)
+mpp3          3        gpo, nand(io5), spi(miso)
+mpp4          4        gpio, nand(io6), uart0(rxd), ptp(clk), sata1(act)
+mpp5          5        gpo, nand(io7), uart0(txd), ptp(trig), sata0(act)
+mpp6          6        sysrst(out), spi(mosi), ptp(trig)
+mpp7          7        gpo, pex(rsto), spi(cs), ptp(trig)
+mpp8          8        gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk),
+                       mii(col), mii-1(rxerr), sata1(prsnt)
+mpp9          9        gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq),
+                       mii(crs), sata0(prsnt)
+mpp10         10       gpo, spi(sck), uart0(txd), ptp(trig), sata1(act)
+mpp11         11       gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq),
+                       ptp-2(trig), sata0(act)
+mpp12         12       gpio, sdio(clk)
+mpp13         13       gpio, sdio(cmd), uart1(txd)
+mpp14         14       gpio, sdio(d0), uart1(rxd), mii(col), sata1(prsnt)
+mpp15         15       gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act)
+mpp16         16       gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs),
+                       sata1(act)
+mpp17         17       gpio, sdio(d3), sata0(prsnt)
+mpp18         18       gpo, nand(io0)
+mpp19         19       gpo, nand(io1)
+mpp20         20       gpio, ge1(txd0), ts(mp0), tdm(tx0ql), audio(spdifi),
+                       sata1(act)
+mpp21         21       gpio, ge1(txd1), sata0(act), ts(mp1), tdm(rx0ql),
+                       audio(spdifo)
+mpp22         22       gpio, ge1(txd2), ts(mp2), tdm(tx2ql), audio(rmclk),
+                       sata1(prsnt)
+mpp23         23       gpio, ge1(txd3), sata0(prsnt), ts(mp3), tdm(rx2ql),
+                       audio(bclk)
+mpp24         24       gpio, ge1(rxd0), ts(mp4), tdm(spi-cs0), audio(sdo)
+mpp25         25       gpio, ge1(rxd1), ts(mp5), tdm(spi-sck), audio(lrclk)
+mpp26         26       gpio, ge1(rxd2), ts(mp6), tdm(spi-miso), audio(mclk)
+mpp27         27       gpio, ge1(rxd3), ts(mp7), tdm(spi-mosi), audio(sdi)
+mpp28         28       gpio, ge1(col), ts(mp8), tdm(int), audio(extclk)
+mpp29         29       gpio, ge1(txclk), ts(mp9), tdm(rst)
+mpp30         30       gpio, ge1(rxclk), ts(mp10), tdm(pclk)
+mpp31         31       gpio, ge1(rxclk), ts(mp11), tdm(fs)
+mpp32         32       gpio, ge1(txclko), ts(mp12), tdm(drx)
+mpp33         33       gpo, ge1(txclk), tdm(drx)
+mpp34         34       gpio, ge1(txen), tdm(spi-cs1), sata1(act)
+mpp35         35       gpio, ge1(rxerr), sata0(act), mii(rxerr), tdm(tx0ql)
+mpp36         36       gpio, ts(mp0), tdm(spi-cs1), audio(spdifi)
+mpp37         37       gpio, ts(mp1), tdm(tx2ql), audio(spdifo)
+mpp38         38       gpio, ts(mp2), tdm(rx2ql), audio(rmclk)
+mpp39         39       gpio, ts(mp3), tdm(spi-cs0), audio(bclk)
+mpp40         40       gpio, ts(mp4), tdm(spi-sck), audio(sdo)
+mpp41         41       gpio, ts(mp5), tdm(spi-miso), audio(lrclk)
+mpp42         42       gpio, ts(mp6), tdm(spi-mosi), audio(mclk)
+mpp43         43       gpio, ts(mp7), tdm(int), audio(sdi)
+mpp44         44       gpio, ts(mp8), tdm(rst), audio(extclk)
+mpp45         45       gpio, ts(mp9), tdm(pclk)
+mpp46         46       gpio, ts(mp10), tdm(fs)
+mpp47         47       gpio, ts(mp11), tdm(drx)
+mpp48         48       gpio, ts(mp12), tdm(dtx)
+mpp49         49       gpio, ts(mp9), tdm(rx0ql), ptp(clk)
+
+* Marvell Kirkwood 88f6282
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, nand(io2), spi(cs)
+mpp1          1        gpo, nand(io3), spi(mosi)
+mpp2          2        gpo, nand(io4), spi(sck)
+mpp3          3        gpo, nand(io5), spi(miso)
+mpp4          4        gpio, nand(io6), uart0(rxd), sata1(act), lcd(hsync)
+mpp5          5        gpo, nand(io7), uart0(txd), sata0(act), lcd(vsync)
+mpp6          6        sysrst(out), spi(mosi)
+mpp7          7        gpo, spi(cs), lcd(pwm)
+mpp8          8        gpio, twsi0(sda), uart0(rts), uart1(rts), mii(col),
+                       mii-1(rxerr), sata1(prsnt)
+mpp9          9        gpio, twsi(sck), uart0(cts), uart1(cts), mii(crs),
+                       sata0(prsnt)
+mpp10         10       gpo, spi(sck), uart0(txd), sata1(act)
+mpp11         11       gpio, spi(miso), uart0(rxd), sata0(act)
+mpp12         12       gpo, sdio(clk), audio(spdifo), spi(mosi), twsi(sda)
+mpp13         13       gpio, sdio(cmd), uart1(txd), audio(rmclk), lcd(pwm)
+mpp14         14       gpio, sdio(d0), uart1(rxd), mii(col), sata1(prsnt),
+                       audio(spdifi), audio-1(sdi)
+mpp15         15       gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act),
+                       spi(cs)
+mpp16         16       gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs),
+                       sata1(act), lcd(extclk)
+mpp17         17       gpio, sdio(d3), sata0(prsnt), sata1(act), twsi1(sck)
+mpp18         18       gpo, nand(io0), pex(clkreq)
+mpp19         19       gpo, nand(io1)
+mpp20         20       gpio, ge1(txd0), ts(mp0), tdm(tx0ql), audio(spdifi),
+                       sata1(act), lcd(d0)
+mpp21         21       gpio, ge1(txd1), sata0(act), ts(mp1), tdm(rx0ql),
+                       audio(spdifo), lcd(d1)
+mpp22         22       gpio, ge1(txd2), ts(mp2), tdm(tx2ql), audio(rmclk),
+                       sata1(prsnt), lcd(d2)
+mpp23         23       gpio, ge1(txd3), sata0(prsnt), ts(mp3), tdm(rx2ql),
+                       audio(bclk), lcd(d3)
+mpp24         24       gpio, ge1(rxd0), ts(mp4), tdm(spi-cs0), audio(sdo),
+                       lcd(d4)
+mpp25         25       gpio, ge1(rxd1), ts(mp5), tdm(spi-sck), audio(lrclk),
+                       lcd(d5)
+mpp26         26       gpio, ge1(rxd2), ts(mp6), tdm(spi-miso), audio(mclk),
+                       lcd(d6)
+mpp27         27       gpio, ge1(rxd3), ts(mp7), tdm(spi-mosi), audio(sdi),
+                       lcd(d7)
+mpp28         28       gpio, ge1(col), ts(mp8), tdm(int), audio(extclk),
+                       lcd(d8)
+mpp29         29       gpio, ge1(txclk), ts(mp9), tdm(rst), lcd(d9)
+mpp30         30       gpio, ge1(rxclk), ts(mp10), tdm(pclk), lcd(d10)
+mpp31         31       gpio, ge1(rxclk), ts(mp11), tdm(fs), lcd(d11)
+mpp32         32       gpio, ge1(txclko), ts(mp12), tdm(drx), lcd(d12)
+mpp33         33       gpo, ge1(txclk), tdm(drx), lcd(d13)
+mpp34         34       gpio, ge1(txen), tdm(spi-cs1), sata1(act), lcd(d14)
+mpp35         35       gpio, ge1(rxerr), sata0(act), mii(rxerr), tdm(tx0ql),
+                       lcd(d15)
+mpp36         36       gpio, ts(mp0), tdm(spi-cs1), audio(spdifi), twsi1(sda)
+mpp37         37       gpio, ts(mp1), tdm(tx2ql), audio(spdifo), twsi1(sck)
+mpp38         38       gpio, ts(mp2), tdm(rx2ql), audio(rmclk), lcd(d18)
+mpp39         39       gpio, ts(mp3), tdm(spi-cs0), audio(bclk), lcd(d19)
+mpp40         40       gpio, ts(mp4), tdm(spi-sck), audio(sdo), lcd(d20)
+mpp41         41       gpio, ts(mp5), tdm(spi-miso), audio(lrclk), lcd(d21)
+mpp42         42       gpio, ts(mp6), tdm(spi-mosi), audio(mclk), lcd(d22)
+mpp43         43       gpio, ts(mp7), tdm(int), audio(sdi), lcd(d23)
+mpp44         44       gpio, ts(mp8), tdm(rst), audio(extclk), lcd(clk)
+mpp45         45       gpio, ts(mp9), tdm(pclk), lcd(e)
+mpp46         46       gpio, ts(mp10), tdm(fs), lcd(hsync)
+mpp47         47       gpio, ts(mp11), tdm(drx), lcd(vsync)
+mpp48         48       gpio, ts(mp12), tdm(dtx), lcd(d16)
+mpp49         49       gpo, tdm(rx0ql), pex(clkreq), lcd(d17)
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index f15eba4..31c0bba 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -155,6 +155,10 @@ config PINCTRL_DOVE
 	bool
 	select PINCTRL_MVEBU
 
+config PINCTRL_KIRKWOOD
+	bool
+	select PINCTRL_MVEBU
+
 source "drivers/pinctrl/spear/Kconfig"
 
 endmenu
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index d1327df..3006294 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -31,5 +31,6 @@ obj-$(CONFIG_PINCTRL_U300)	+= pinctrl-u300.o
 obj-$(CONFIG_PINCTRL_COH901)	+= pinctrl-coh901.o
 obj-$(CONFIG_PINCTRL_MVEBU)	+= pinctrl-mvebu.o
 obj-$(CONFIG_PINCTRL_DOVE)	+= pinctrl-dove.o
+obj-$(CONFIG_PINCTRL_KIRKWOOD)	+= pinctrl-kirkwood.o
 
 obj-$(CONFIG_PLAT_SPEAR)	+= spear/
diff --git a/drivers/pinctrl/pinctrl-kirkwood.c b/drivers/pinctrl/pinctrl-kirkwood.c
new file mode 100644
index 0000000..23f493a
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-kirkwood.c
@@ -0,0 +1,462 @@
+/*
+ * Marvell Kirkwood pinctrl driver based on mvebu pinctrl core
+ *
+ * Author: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-mvebu.h"
+
+#define V(f6180, f6190, f6192, f6281, f6282)		\
+	((f6180 << 0) | (f6190 << 1) | (f6192 << 2) |	\
+	 (f6281 << 3) | (f6282 << 4))
+
+enum kirkwood_variant {
+	VARIANT_MV88F6180 = V(1, 0, 0, 0, 0),
+	VARIANT_MV88F6190 = V(0, 1, 0, 0, 0),
+	VARIANT_MV88F6192 = V(0, 0, 1, 0, 0),
+	VARIANT_MV88F6281 = V(0, 0, 0, 1, 0),
+	VARIANT_MV88F6282 = V(0, 0, 0, 0, 1),
+};
+
+static struct mvebu_mpp_mode mv88f6xxx_mpp_modes[] = {
+	MPP_MODE(0,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "nand", "io2",     V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "spi", "cs",       V(1, 1, 1, 1, 1))),
+	MPP_MODE(1,
+		MPP_VAR_FUNCTION(0x0, "gpo", NULL,       V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "nand", "io3",     V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "spi", "mosi",     V(1, 1, 1, 1, 1))),
+	MPP_MODE(2,
+		MPP_VAR_FUNCTION(0x0, "gpo", NULL,       V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "nand", "io4",     V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "spi", "sck",      V(1, 1, 1, 1, 1))),
+	MPP_MODE(3,
+		MPP_VAR_FUNCTION(0x0, "gpo", NULL,       V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "nand", "io5",     V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "spi", "miso",     V(1, 1, 1, 1, 1))),
+	MPP_MODE(4,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "nand", "io6",     V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "uart0", "rxd",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x5, "sata1", "act",    V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "hsync",    V(0, 0, 0, 0, 1)),
+		MPP_VAR_FUNCTION(0xd, "ptp", "clk",      V(1, 1, 1, 1, 0))),
+	MPP_MODE(5,
+		MPP_VAR_FUNCTION(0x0, "gpo", NULL,       V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "nand", "io7",     V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "uart0", "txd",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "ptp", "trig",     V(1, 1, 1, 1, 0)),
+		MPP_VAR_FUNCTION(0x5, "sata0", "act",    V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "vsync",    V(0, 0, 0, 0, 1))),
+	MPP_MODE(6,
+		MPP_VAR_FUNCTION(0x0, "sysrst", "out",   V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "spi", "mosi",     V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "ptp", "trig",     V(1, 1, 1, 1, 0))),
+	MPP_MODE(7,
+		MPP_VAR_FUNCTION(0x0, "gpo", NULL,       V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "pex", "rsto",     V(1, 1, 1, 1, 0)),
+		MPP_VAR_FUNCTION(0x2, "spi", "cs",       V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ptp", "trig",     V(1, 1, 1, 1, 0)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "pwm",      V(0, 0, 0, 0, 1))),
+	MPP_MODE(8,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "twsi0", "sda",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "uart0", "rts",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "uart1", "rts",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "mii-1", "rxerr",  V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x5, "sata1", "prsnt",  V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xc, "ptp", "clk",      V(1, 1, 1, 1, 0)),
+		MPP_VAR_FUNCTION(0xd, "mii", "col",      V(1, 1, 1, 1, 1))),
+	MPP_MODE(9,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "twsi0", "sck",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "uart0", "cts",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "uart1", "cts",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x5, "sata0", "prsnt",  V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xc, "ptp", "evreq",    V(1, 1, 1, 1, 0)),
+		MPP_VAR_FUNCTION(0xd, "mii", "crs",      V(1, 1, 1, 1, 1))),
+	MPP_MODE(10,
+		MPP_VAR_FUNCTION(0x0, "gpo", NULL,       V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "spi", "sck",      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0X3, "uart0", "txd",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x5, "sata1", "act",    V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xc, "ptp", "trig",     V(1, 1, 1, 1, 0))),
+	MPP_MODE(11,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "spi", "miso",     V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "uart0", "rxd",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "ptp-1", "evreq",  V(1, 1, 1, 1, 0)),
+		MPP_VAR_FUNCTION(0xc, "ptp-2", "trig",   V(1, 1, 1, 1, 0)),
+		MPP_VAR_FUNCTION(0xd, "ptp", "clk",      V(1, 1, 1, 1, 0)),
+		MPP_VAR_FUNCTION(0x5, "sata0", "act",    V(0, 1, 1, 1, 1))),
+	MPP_MODE(12,
+		MPP_VAR_FUNCTION(0x0, "gpo", NULL,       V(1, 1, 1, 0, 1)),
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 0, 0, 1, 0)),
+		MPP_VAR_FUNCTION(0x1, "sdio", "clk",     V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xa, "audio", "spdifo", V(0, 0, 0, 0, 1)),
+		MPP_VAR_FUNCTION(0xb, "spi", "mosi",     V(0, 0, 0, 0, 1)),
+		MPP_VAR_FUNCTION(0xd, "twsi1", "sda",    V(0, 0, 0, 0, 1))),
+	MPP_MODE(13,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "sdio", "cmd",     V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "uart1", "txd",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xa, "audio", "rmclk",  V(0, 0, 0, 0, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "pwm",      V(0, 0, 0, 0, 1))),
+	MPP_MODE(14,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "sdio", "d0",      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "uart1", "rxd",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "sata1", "prsnt",  V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xa, "audio", "spdifi", V(0, 0, 0, 0, 1)),
+		MPP_VAR_FUNCTION(0xb, "audio-1", "sdi",  V(0, 0, 0, 0, 1)),
+		MPP_VAR_FUNCTION(0xd, "mii", "col",      V(1, 1, 1, 1, 1))),
+	MPP_MODE(15,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "sdio", "d1",      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "uart0", "rts",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "uart1", "txd",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "sata0", "act",    V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "spi", "cs",       V(0, 0, 0, 0, 1))),
+	MPP_MODE(16,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "sdio", "d2",      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "uart0", "cts",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "uart1", "rxd",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "sata1", "act",    V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "extclk",   V(0, 0, 0, 0, 1)),
+		MPP_VAR_FUNCTION(0xd, "mii", "crs",      V(1, 1, 1, 1, 1))),
+	MPP_MODE(17,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "sdio", "d3",      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "sata0", "prsnt",  V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xa, "sata1", "act",    V(0, 0, 0, 0, 1)),
+		MPP_VAR_FUNCTION(0xd, "twsi1", "sck",    V(0, 0, 0, 0, 1))),
+	MPP_MODE(18,
+		MPP_VAR_FUNCTION(0x0, "gpo", NULL,       V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "nand", "io0",     V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "pex", "clkreq",   V(0, 0, 0, 0, 1))),
+	MPP_MODE(19,
+		MPP_VAR_FUNCTION(0x0, "gpo", NULL,       V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "nand", "io1",     V(1, 1, 1, 1, 1))),
+	MPP_MODE(20,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp0",       V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "tx0ql",    V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "txd0",     V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "spdifi", V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x5, "sata1", "act",    V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d0",       V(0, 0, 0, 0, 1)),
+		MPP_VAR_FUNCTION(0xc, "mii", "rxerr",    V(1, 0, 0, 0, 0))),
+	MPP_MODE(21,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp1",       V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "rx0ql",    V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "txd1",     V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "spdifi", V(1, 0, 0, 0, 0)),
+		MPP_VAR_FUNCTION(0x4, "audio", "spdifo", V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x5, "sata0", "act",    V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d1",       V(0, 0, 0, 0, 1))),
+	MPP_MODE(22,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp2",       V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "tx2ql",    V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "txd2",     V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "spdifo", V(1, 0, 0, 0, 0)),
+		MPP_VAR_FUNCTION(0x4, "audio", "rmclk",  V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x5, "sata1", "prsnt",  V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d2",       V(0, 0, 0, 0, 1))),
+	MPP_MODE(23,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp3",       V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "rx2ql",    V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "txd3",     V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "rmclk",  V(1, 0, 0, 0, 0)),
+		MPP_VAR_FUNCTION(0x4, "audio", "bclk",   V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x5, "sata0", "prsnt",  V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d3",       V(0, 0, 0, 0, 1))),
+	MPP_MODE(24,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp4",       V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "spi-cs0",  V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "rxd0",     V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "bclk",   V(1, 0, 0, 0, 0)),
+		MPP_VAR_FUNCTION(0x4, "audio", "sdo",    V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d4",       V(0, 0, 0, 0, 1))),
+	MPP_MODE(25,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp5",       V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "spi-sck",  V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "rxd1",     V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "sdo",    V(1, 0, 0, 0, 0)),
+		MPP_VAR_FUNCTION(0x4, "audio", "lrclk",  V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d5",       V(0, 0, 0, 0, 1))),
+	MPP_MODE(26,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp6",       V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "spi-miso", V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "rxd2",     V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "lrclk",  V(1, 0, 0, 0, 0)),
+		MPP_VAR_FUNCTION(0x4, "audio", "mclk",   V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d6",       V(0, 0, 0, 0, 1))),
+	MPP_MODE(27,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp7",       V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "spi-mosi", V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "rxd3",     V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "mclk",   V(1, 0, 0, 0, 0)),
+		MPP_VAR_FUNCTION(0x4, "audio", "sdi",    V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d7",       V(0, 0, 0, 0, 1))),
+	MPP_MODE(28,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp8",       V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "int",      V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "col",      V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "sdi",    V(1, 0, 0, 0, 0)),
+		MPP_VAR_FUNCTION(0x4, "audio", "extclk", V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d8",       V(0, 0, 0, 0, 1))),
+	MPP_MODE(29,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp9",       V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "rst",      V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "txclk",    V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "extclk", V(1, 0, 0, 0, 0)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d9",       V(0, 0, 0, 0, 1))),
+	MPP_MODE(30,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp10",      V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "pclk",     V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "rxctl",    V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d10",      V(0, 0, 0, 0, 1))),
+	MPP_MODE(31,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp11",      V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "fs",       V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "rxclk",    V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d11",      V(0, 0, 0, 0, 1))),
+	MPP_MODE(32,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp12",      V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "drx",      V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "txclko",   V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d12",      V(0, 0, 0, 0, 1))),
+	MPP_MODE(33,
+		MPP_VAR_FUNCTION(0x0, "gpo", NULL,       V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "dtx",      V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "txctl",    V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d13",      V(0, 0, 0, 0, 1))),
+	MPP_MODE(34,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "spi-cs1",  V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "txen",     V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x5, "sata1", "act",    V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d14",      V(0, 0, 0, 0, 1))),
+	MPP_MODE(35,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "tx0ql",    V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "rxerr",    V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x5, "sata0", "act",    V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d15",      V(0, 0, 0, 0, 1)),
+		MPP_VAR_FUNCTION(0xc, "mii", "rxerr",    V(0, 1, 1, 1, 1))),
+	MPP_MODE(36,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp0",       V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "spi-cs1",  V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "spdifi", V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "twsi1", "sda",    V(0, 0, 0, 0, 1))),
+	MPP_MODE(37,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp1",       V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "tx2ql",    V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "spdifo", V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "twsi1", "sck",    V(0, 0, 0, 0, 1))),
+	MPP_MODE(38,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp2",       V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "rx2ql",    V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "rmclk",  V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d18",      V(0, 0, 0, 0, 1))),
+	MPP_MODE(39,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp3",       V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "spi-cs0",  V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "bclk",   V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d19",      V(0, 0, 0, 0, 1))),
+	MPP_MODE(40,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp4",       V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "spi-sck",  V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "sdo",    V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d20",      V(0, 0, 0, 0, 1))),
+	MPP_MODE(41,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp5",       V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "spi-miso", V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "lrclk",  V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d21",      V(0, 0, 0, 0, 1))),
+	MPP_MODE(42,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp6",       V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "spi-mosi", V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "mclk",   V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d22",      V(0, 0, 0, 0, 1))),
+	MPP_MODE(43,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp7",       V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "int",      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "sdi",    V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d23",      V(0, 0, 0, 0, 1))),
+	MPP_MODE(44,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp8",       V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "rst",      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "extclk", V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "clk",      V(0, 0, 0, 0, 1))),
+	MPP_MODE(45,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp9",       V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "pclk",     V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "e",        V(0, 0, 0, 0, 1))),
+	MPP_MODE(46,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp10",      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "fs",       V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "hsync",    V(0, 0, 0, 0, 1))),
+	MPP_MODE(47,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp11",      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "drx",      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "vsync",    V(0, 0, 0, 0, 1))),
+	MPP_MODE(48,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp12",      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "dtx",      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d16",      V(0, 0, 0, 0, 1))),
+	MPP_MODE(49,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 0, 0, 1, 0)),
+		MPP_VAR_FUNCTION(0x0, "gpo", NULL,       V(0, 0, 0, 0, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp9",       V(0, 0, 0, 1, 0)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "rx0ql",    V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x5, "ptp", "clk",      V(0, 0, 0, 1, 0)),
+		MPP_VAR_FUNCTION(0xa, "pex", "clkreq",   V(0, 0, 0, 0, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d17",      V(0, 0, 0, 0, 1))),
+};
+
+static struct mvebu_mpp_ctrl mv88f6180_mpp_controls[] = {
+	MPP_REG_CTRL(0, 29),
+};
+
+static struct pinctrl_gpio_range mv88f6180_gpio_ranges[] = {
+	MPP_GPIO_RANGE(0, 0, 0, 30),
+};
+
+static struct mvebu_mpp_ctrl mv88f619x_mpp_controls[] = {
+	MPP_REG_CTRL(0, 35),
+};
+
+static struct pinctrl_gpio_range mv88f619x_gpio_ranges[] = {
+	MPP_GPIO_RANGE(0,  0,  0, 32),
+	MPP_GPIO_RANGE(1, 32, 32,  4),
+};
+
+static struct mvebu_mpp_ctrl mv88f628x_mpp_controls[] = {
+	MPP_REG_CTRL(0, 49),
+};
+
+static struct pinctrl_gpio_range mv88f628x_gpio_ranges[] = {
+	MPP_GPIO_RANGE(0,  0,  0, 32),
+	MPP_GPIO_RANGE(1, 32, 32, 18),
+};
+
+static struct mvebu_pinctrl_soc_info kirkwood_pinctrl_info;
+
+static struct of_device_id kirkwood_pinctrl_of_match[] __devinitdata = {
+	{ .compatible = "marvell,88f6180-pinctrl",
+					  .data = (void *)VARIANT_MV88F6180 },
+	{ .compatible = "marvell,88f6190-pinctrl",
+					  .data = (void *)VARIANT_MV88F6190 },
+	{ .compatible = "marvell,88f6192-pinctrl",
+					  .data = (void *)VARIANT_MV88F6192 },
+	{ .compatible = "marvell,88f6281-pinctrl",
+					  .data = (void *)VARIANT_MV88F6281 },
+	{ .compatible = "marvell,88f6282-pinctrl",
+					  .data = (void *)VARIANT_MV88F6282 },
+	{ }
+};
+
+static int __devinit kirkwood_pinctrl_probe(struct platform_device *pdev)
+{
+	struct mvebu_pinctrl_soc_info *soc = &kirkwood_pinctrl_info;
+	const struct of_device_id *match =
+		of_match_device(kirkwood_pinctrl_of_match, &pdev->dev);
+
+	if (match) {
+		soc->variant = (unsigned)match->data & 0xff;
+		switch (soc->variant) {
+		case VARIANT_MV88F6180:
+			soc->controls = mv88f6180_mpp_controls;
+			soc->ncontrols = ARRAY_SIZE(mv88f6180_mpp_controls);
+			soc->modes = mv88f6xxx_mpp_modes;
+			soc->nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes);
+			soc->gpioranges = mv88f6180_gpio_ranges;
+			soc->ngpioranges = ARRAY_SIZE(mv88f6180_gpio_ranges);
+			break;
+		case VARIANT_MV88F6190:
+		case VARIANT_MV88F6192:
+			soc->controls = mv88f619x_mpp_controls;
+			soc->ncontrols = ARRAY_SIZE(mv88f619x_mpp_controls);
+			soc->modes = mv88f6xxx_mpp_modes;
+			soc->nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes);
+			soc->gpioranges = mv88f619x_gpio_ranges;
+			soc->ngpioranges = ARRAY_SIZE(mv88f619x_gpio_ranges);
+			break;
+		case VARIANT_MV88F6281:
+		case VARIANT_MV88F6282:
+			soc->controls = mv88f628x_mpp_controls;
+			soc->ncontrols = ARRAY_SIZE(mv88f628x_mpp_controls);
+			soc->modes = mv88f6xxx_mpp_modes;
+			soc->nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes);
+			soc->gpioranges = mv88f628x_gpio_ranges;
+			soc->ngpioranges = ARRAY_SIZE(mv88f628x_gpio_ranges);
+			break;
+		}
+		pdev->dev.platform_data = soc;
+	}
+	return mvebu_pinctrl_probe(pdev);
+}
+
+static int __devexit kirkwood_pinctrl_remove(struct platform_device *pdev)
+{
+	return mvebu_pinctrl_remove(pdev);
+}
+
+static struct platform_driver kirkwood_pinctrl_driver = {
+	.driver = {
+		.name = "kirkwood-pinctrl",
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(kirkwood_pinctrl_of_match),
+	},
+	.probe = kirkwood_pinctrl_probe,
+	.remove = __devexit_p(kirkwood_pinctrl_remove),
+};
+
+module_platform_driver(kirkwood_pinctrl_driver);
+
+MODULE_AUTHOR("Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>");
+MODULE_DESCRIPTION("Marvell Kirkwood pinctrl driver");
+MODULE_LICENSE("GPL v2");
-- 
1.7.10.4

[PATCH v2 4/9] pinctrl: mvebu: add pinctrl driver for Armada 370

From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: 2012-08-22 08:23:09

From: Thomas Petazzoni <redacted>

This pinctrl driver is not a full-blown pinctrl driver from scratch:
it relies on the common pinctrl-mvebu driver, which is used for all
Marvell EBU SoCs.

Signed-off-by: Thomas Petazzoni <redacted>
---
v2:
- removed arch/arm/*/Kconfig changes and added note about variant = 0

Cc: Thomas Petazzoni <redacted>
Cc: Grant Likely <redacted>
Cc: Rob Herring <redacted>
Cc: Rob Landley <redacted>
Cc: Russell King <redacted>
Cc: Lior Amsalem <redacted>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory CLEMENT <redacted>
Cc: Ben Dooks <redacted>
Cc: Linus Walleij <redacted>
Cc: Stephen Warren <redacted>
Cc: devicetree-discuss at lists.ozlabs.org
Cc: linux-doc at vger.kernel.org
Cc: linux-kernel at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
---
 .../pinctrl/marvell,armada-370-pinctrl.txt         |   95 +++++
 drivers/pinctrl/Kconfig                            |    4 +
 drivers/pinctrl/Makefile                           |    1 +
 drivers/pinctrl/pinctrl-armada-370.c               |  421 ++++++++++++++++++++
 4 files changed, 521 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt
 create mode 100644 drivers/pinctrl/pinctrl-armada-370.c
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt
new file mode 100644
index 0000000..01ef408
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt
@@ -0,0 +1,95 @@
+* Marvell Armada 370 SoC pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "marvell,88f6710-pinctrl"
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, uart0(rxd)
+mpp1          1        gpo, uart0(txd)
+mpp2          2        gpio, i2c0(sck), uart0(txd)
+mpp3          3        gpio, i2c0(sda), uart0(rxd)
+mpp4          4        gpio, cpu_pd(vdd)
+mpp5          5        gpo, ge0(txclko), uart1(txd), spi1(clk), audio(mclk)
+mpp6          6        gpio, ge0(txd0), sata0(prsnt), tdm(rst), audio(sdo)
+mpp7          7        gpo, ge0(txd1), tdm(tdx), audio(lrclk)
+mpp8          8        gpio, ge0(txd2), uart0(rts), tdm(drx), audio(bclk)
+mpp9          9        gpo, ge0(txd3), uart1(txd), sd0(clk), audio(spdifo)
+mpp10         10       gpio, ge0(txctl), uart0(cts), tdm(fsync), audio(sdi)
+mpp11         11       gpio, ge0(rxd0), uart1(rxd), sd0(cmd), spi0(cs1),
+                       sata1(prsnt), spi1(cs1)
+mpp12         12       gpio, ge0(rxd1), i2c1(sda), sd0(d0), spi1(cs0),
+                       audio(spdifi)
+mpp13         13       gpio, ge0(rxd2), i2c1(sck), sd0(d1), tdm(pclk),
+                       audio(rmclk)
+mpp14         14       gpio, ge0(rxd3), pcie(clkreq0), sd0(d2), spi1(mosi),
+                       spi0(cs2)
+mpp15         15       gpio, ge0(rxctl), pcie(clkreq1), sd0(d3), spi1(miso),
+                       spi0(cs3)
+mpp16         16       gpio, ge0(rxclk), uart1(rxd), tdm(int), audio(extclk)
+mpp17         17       gpo, ge(mdc)
+mpp18         18       gpio, ge(mdio)
+mpp19         19       gpio, ge0(txclk), ge1(txclkout), tdm(pclk)
+mpp20         20       gpo, ge0(txd4), ge1(txd0)
+mpp21         21       gpo, ge0(txd5), ge1(txd1), uart1(txd)
+mpp22         22       gpo, ge0(txd6), ge1(txd2), uart0(rts)
+mpp23         23       gpo, ge0(txd7), ge1(txd3), spi1(mosi)
+mpp24         24       gpio, ge0(col), ge1(txctl), spi1(cs0)
+mpp25         25       gpio, ge0(rxerr), ge1(rxd0), uart1(rxd)
+mpp26         26       gpio, ge0(crs), ge1(rxd1), spi1(miso)
+mpp27         27       gpio, ge0(rxd4), ge1(rxd2), uart0(cts)
+mpp28         28       gpio, ge0(rxd5), ge1(rxd3)
+mpp29         29       gpio, ge0(rxd6), ge1(rxctl), i2c1(sda)
+mpp30         30       gpio, ge0(rxd7), ge1(rxclk), i2c1(sck)
+mpp31         31       gpio, tclk, ge0(txerr)
+mpp32         32       gpio, spi0(cs0)
+mpp33         33       gpio, dev(bootcs), spi0(cs0)
+mpp34         34       gpo, dev(wen0), spi0(mosi)
+mpp35         35       gpo, dev(oen), spi0(sck)
+mpp36         36       gpo, dev(a1), spi0(miso)
+mpp37         37       gpo, dev(a0), sata0(prsnt)
+mpp38         38       gpio, dev(ready), uart1(cts), uart0(cts)
+mpp39         39       gpo, dev(ad0), audio(spdifo)
+mpp40         40       gpio, dev(ad1), uart1(rts), uart0(rts)
+mpp41         41       gpio, dev(ad2), uart1(rxd)
+mpp42         42       gpo, dev(ad3), uart1(txd)
+mpp43         43       gpo, dev(ad4), audio(bclk)
+mpp44         44       gpo, dev(ad5), audio(mclk)
+mpp45         45       gpo, dev(ad6), audio(lrclk)
+mpp46         46       gpo, dev(ad7), audio(sdo)
+mpp47         47       gpo, dev(ad8), sd0(clk), audio(spdifo)
+mpp48         48       gpio, dev(ad9), uart0(rts), sd0(cmd), sata1(prsnt),
+                       spi0(cs1)
+mpp49         49       gpio, dev(ad10), pcie(clkreq1), sd0(d0), spi1(cs0),
+                       audio(spdifi)
+mpp50         50       gpio, dev(ad11), uart0(cts), sd0(d1), spi1(miso),
+                       audio(rmclk)
+mpp51         51       gpio, dev(ad12), i2c1(sda), sd0(d2), spi1(mosi)
+mpp52         52       gpio, dev(ad13), i2c1(sck), sd0(d3), spi1(sck)
+mpp53         53       gpio, dev(ad14), sd0(clk), tdm(pclk), spi0(cs2),
+                       pcie(clkreq1)
+mpp54         54       gpo, dev(ad15), tdm(dtx)
+mpp55         55       gpio, dev(cs1), uart1(txd), tdm(rst), sata1(prsnt),
+                       sata0(prsnt)
+mpp56         56       gpio, dev(cs2), uart1(cts), uart0(cts), spi0(cs3),
+                       pcie(clkreq0), spi1(cs1)
+mpp57         57       gpio, dev(cs3), uart1(rxd), tdm(fsync), sata0(prsnt),
+                       audio(sdo)
+mpp58         58       gpio, dev(cs0), uart1(rts), tdm(int), audio(extclk),
+                       uart0(rts)
+mpp59         59       gpo, dev(ale0), uart1(rts), uart0(rts), audio(bclk)
+mpp60         60       gpio, dev(ale1), uart1(rxd), sata0(prsnt), pcie(rst-out),
+                       audio(sdi)
+mpp61         61       gpo, dev(wen1), uart1(txd), audio(rclk)
+mpp62         62       gpio, dev(a2), uart1(cts), tdm(drx), pcie(clkreq0),
+                       audio(mclk), uart0(cts)
+mpp63         63       gpo, spi0(sck), tclk
+mpp64         64       gpio, spi0(miso), spi0-1(cs1)
+mpp65         65       gpio, spi0(mosi), spi0-1(cs2)
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 31c0bba..e16b8b0 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -159,6 +159,10 @@ config PINCTRL_KIRKWOOD
 	bool
 	select PINCTRL_MVEBU
 
+config PINCTRL_ARMADA_370
+	bool
+	select PINCTRL_MVEBU
+
 source "drivers/pinctrl/spear/Kconfig"
 
 endmenu
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 3006294..e6d6667 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -32,5 +32,6 @@ obj-$(CONFIG_PINCTRL_COH901)	+= pinctrl-coh901.o
 obj-$(CONFIG_PINCTRL_MVEBU)	+= pinctrl-mvebu.o
 obj-$(CONFIG_PINCTRL_DOVE)	+= pinctrl-dove.o
 obj-$(CONFIG_PINCTRL_KIRKWOOD)	+= pinctrl-kirkwood.o
+obj-$(CONFIG_PINCTRL_ARMADA_370) += pinctrl-armada-370.o
 
 obj-$(CONFIG_PLAT_SPEAR)	+= spear/
diff --git a/drivers/pinctrl/pinctrl-armada-370.c b/drivers/pinctrl/pinctrl-armada-370.c
new file mode 100644
index 0000000..c907647
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-armada-370.c
@@ -0,0 +1,421 @@
+/*
+ * Marvell Armada 370 pinctrl driver based on mvebu pinctrl core
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-mvebu.h"
+
+static struct mvebu_mpp_mode mv88f6710_mpp_modes[] = {
+	MPP_MODE(0,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "uart0", "rxd")),
+	MPP_MODE(1,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "uart0", "txd")),
+	MPP_MODE(2,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "i2c0", "sck"),
+	   MPP_FUNCTION(0x2, "uart0", "txd")),
+	MPP_MODE(3,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "i2c0", "sda"),
+	   MPP_FUNCTION(0x2, "uart0", "rxd")),
+	MPP_MODE(4,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "cpu_pd", "vdd")),
+	MPP_MODE(5,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "txclko"),
+	   MPP_FUNCTION(0x2, "uart1", "txd"),
+	   MPP_FUNCTION(0x4, "spi1", "clk"),
+	   MPP_FUNCTION(0x5, "audio", "mclk")),
+	MPP_MODE(6,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "txd0"),
+	   MPP_FUNCTION(0x2, "sata0", "prsnt"),
+	   MPP_FUNCTION(0x4, "tdm", "rst"),
+	   MPP_FUNCTION(0x5, "audio", "sdo")),
+	MPP_MODE(7,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "txd1"),
+	   MPP_FUNCTION(0x4, "tdm", "tdx"),
+	   MPP_FUNCTION(0x5, "audio", "lrclk")),
+	MPP_MODE(8,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "txd2"),
+	   MPP_FUNCTION(0x2, "uart0", "rts"),
+	   MPP_FUNCTION(0x4, "tdm", "drx"),
+	   MPP_FUNCTION(0x5, "audio", "bclk")),
+	MPP_MODE(9,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "txd3"),
+	   MPP_FUNCTION(0x2, "uart1", "txd"),
+	   MPP_FUNCTION(0x3, "sd0", "clk"),
+	   MPP_FUNCTION(0x5, "audio", "spdifo")),
+	MPP_MODE(10,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "txctl"),
+	   MPP_FUNCTION(0x2, "uart0", "cts"),
+	   MPP_FUNCTION(0x4, "tdm", "fsync"),
+	   MPP_FUNCTION(0x5, "audio", "sdi")),
+	MPP_MODE(11,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "rxd0"),
+	   MPP_FUNCTION(0x2, "uart1", "rxd"),
+	   MPP_FUNCTION(0x3, "sd0", "cmd"),
+	   MPP_FUNCTION(0x4, "spi0", "cs1"),
+	   MPP_FUNCTION(0x5, "sata1", "prsnt"),
+	   MPP_FUNCTION(0x6, "spi1", "cs1")),
+	MPP_MODE(12,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "rxd1"),
+	   MPP_FUNCTION(0x2, "i2c1", "sda"),
+	   MPP_FUNCTION(0x3, "sd0", "d0"),
+	   MPP_FUNCTION(0x4, "spi1", "cs0"),
+	   MPP_FUNCTION(0x5, "audio", "spdifi")),
+	MPP_MODE(13,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "rxd2"),
+	   MPP_FUNCTION(0x2, "i2c1", "sck"),
+	   MPP_FUNCTION(0x3, "sd0", "d1"),
+	   MPP_FUNCTION(0x4, "tdm", "pclk"),
+	   MPP_FUNCTION(0x5, "audio", "rmclk")),
+	MPP_MODE(14,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "rxd3"),
+	   MPP_FUNCTION(0x2, "pcie", "clkreq0"),
+	   MPP_FUNCTION(0x3, "sd0", "d2"),
+	   MPP_FUNCTION(0x4, "spi1", "mosi"),
+	   MPP_FUNCTION(0x5, "spi0", "cs2")),
+	MPP_MODE(15,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "rxctl"),
+	   MPP_FUNCTION(0x2, "pcie", "clkreq1"),
+	   MPP_FUNCTION(0x3, "sd0", "d3"),
+	   MPP_FUNCTION(0x4, "spi1", "miso"),
+	   MPP_FUNCTION(0x5, "spi0", "cs3")),
+	MPP_MODE(16,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "rxclk"),
+	   MPP_FUNCTION(0x2, "uart1", "rxd"),
+	   MPP_FUNCTION(0x4, "tdm", "int"),
+	   MPP_FUNCTION(0x5, "audio", "extclk")),
+	MPP_MODE(17,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "ge", "mdc")),
+	MPP_MODE(18,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge", "mdio")),
+	MPP_MODE(19,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "txclk"),
+	   MPP_FUNCTION(0x2, "ge1", "txclkout"),
+	   MPP_FUNCTION(0x4, "tdm", "pclk")),
+	MPP_MODE(20,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "txd4"),
+	   MPP_FUNCTION(0x2, "ge1", "txd0")),
+	MPP_MODE(21,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "txd5"),
+	   MPP_FUNCTION(0x2, "ge1", "txd1"),
+	   MPP_FUNCTION(0x4, "uart1", "txd")),
+	MPP_MODE(22,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "txd6"),
+	   MPP_FUNCTION(0x2, "ge1", "txd2"),
+	   MPP_FUNCTION(0x4, "uart0", "rts")),
+	MPP_MODE(23,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "txd7"),
+	   MPP_FUNCTION(0x2, "ge1", "txd3"),
+	   MPP_FUNCTION(0x4, "spi1", "mosi")),
+	MPP_MODE(24,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "col"),
+	   MPP_FUNCTION(0x2, "ge1", "txctl"),
+	   MPP_FUNCTION(0x4, "spi1", "cs0")),
+	MPP_MODE(25,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "rxerr"),
+	   MPP_FUNCTION(0x2, "ge1", "rxd0"),
+	   MPP_FUNCTION(0x4, "uart1", "rxd")),
+	MPP_MODE(26,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "crs"),
+	   MPP_FUNCTION(0x2, "ge1", "rxd1"),
+	   MPP_FUNCTION(0x4, "spi1", "miso")),
+	MPP_MODE(27,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "rxd4"),
+	   MPP_FUNCTION(0x2, "ge1", "rxd2"),
+	   MPP_FUNCTION(0x4, "uart0", "cts")),
+	MPP_MODE(28,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "rxd5"),
+	   MPP_FUNCTION(0x2, "ge1", "rxd3")),
+	MPP_MODE(29,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "rxd6"),
+	   MPP_FUNCTION(0x2, "ge1", "rxctl"),
+	   MPP_FUNCTION(0x4, "i2c1", "sda")),
+	MPP_MODE(30,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "rxd7"),
+	   MPP_FUNCTION(0x2, "ge1", "rxclk"),
+	   MPP_FUNCTION(0x4, "i2c1", "sck")),
+	MPP_MODE(31,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x3, "tclk", NULL),
+	   MPP_FUNCTION(0x4, "ge0", "txerr")),
+	MPP_MODE(32,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "spi0", "cs0")),
+	MPP_MODE(33,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "bootcs"),
+	   MPP_FUNCTION(0x2, "spi0", "cs0")),
+	MPP_MODE(34,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "dev", "wen0"),
+	   MPP_FUNCTION(0x2, "spi0", "mosi")),
+	MPP_MODE(35,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "dev", "oen"),
+	   MPP_FUNCTION(0x2, "spi0", "sck")),
+	MPP_MODE(36,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "dev", "a1"),
+	   MPP_FUNCTION(0x2, "spi0", "miso")),
+	MPP_MODE(37,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "dev", "a0"),
+	   MPP_FUNCTION(0x2, "sata0", "prsnt")),
+	MPP_MODE(38,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ready"),
+	   MPP_FUNCTION(0x2, "uart1", "cts"),
+	   MPP_FUNCTION(0x3, "uart0", "cts")),
+	MPP_MODE(39,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad0"),
+	   MPP_FUNCTION(0x2, "audio", "spdifo")),
+	MPP_MODE(40,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad1"),
+	   MPP_FUNCTION(0x2, "uart1", "rts"),
+	   MPP_FUNCTION(0x3, "uart0", "rts")),
+	MPP_MODE(41,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad2"),
+	   MPP_FUNCTION(0x2, "uart1", "rxd")),
+	MPP_MODE(42,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad3"),
+	   MPP_FUNCTION(0x2, "uart1", "txd")),
+	MPP_MODE(43,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad4"),
+	   MPP_FUNCTION(0x2, "audio", "bclk")),
+	MPP_MODE(44,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad5"),
+	   MPP_FUNCTION(0x2, "audio", "mclk")),
+	MPP_MODE(45,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad6"),
+	   MPP_FUNCTION(0x2, "audio", "lrclk")),
+	MPP_MODE(46,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad7"),
+	   MPP_FUNCTION(0x2, "audio", "sdo")),
+	MPP_MODE(47,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad8"),
+	   MPP_FUNCTION(0x3, "sd0", "clk"),
+	   MPP_FUNCTION(0x5, "audio", "spdifo")),
+	MPP_MODE(48,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad9"),
+	   MPP_FUNCTION(0x2, "uart0", "rts"),
+	   MPP_FUNCTION(0x3, "sd0", "cmd"),
+	   MPP_FUNCTION(0x4, "sata1", "prsnt"),
+	   MPP_FUNCTION(0x5, "spi0", "cs1")),
+	MPP_MODE(49,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad10"),
+	   MPP_FUNCTION(0x2, "pcie", "clkreq1"),
+	   MPP_FUNCTION(0x3, "sd0", "d0"),
+	   MPP_FUNCTION(0x4, "spi1", "cs0"),
+	   MPP_FUNCTION(0x5, "audio", "spdifi")),
+	MPP_MODE(50,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad11"),
+	   MPP_FUNCTION(0x2, "uart0", "cts"),
+	   MPP_FUNCTION(0x3, "sd0", "d1"),
+	   MPP_FUNCTION(0x4, "spi1", "miso"),
+	   MPP_FUNCTION(0x5, "audio", "rmclk")),
+	MPP_MODE(51,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad12"),
+	   MPP_FUNCTION(0x2, "i2c1", "sda"),
+	   MPP_FUNCTION(0x3, "sd0", "d2"),
+	   MPP_FUNCTION(0x4, "spi1", "mosi")),
+	MPP_MODE(52,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad13"),
+	   MPP_FUNCTION(0x2, "i2c1", "sck"),
+	   MPP_FUNCTION(0x3, "sd0", "d3"),
+	   MPP_FUNCTION(0x4, "spi1", "sck")),
+	MPP_MODE(53,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad14"),
+	   MPP_FUNCTION(0x2, "sd0", "clk"),
+	   MPP_FUNCTION(0x3, "tdm", "pclk"),
+	   MPP_FUNCTION(0x4, "spi0", "cs2"),
+	   MPP_FUNCTION(0x5, "pcie", "clkreq1")),
+	MPP_MODE(54,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad15"),
+	   MPP_FUNCTION(0x3, "tdm", "dtx")),
+	MPP_MODE(55,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "cs1"),
+	   MPP_FUNCTION(0x2, "uart1", "txd"),
+	   MPP_FUNCTION(0x3, "tdm", "rst"),
+	   MPP_FUNCTION(0x4, "sata1", "prsnt"),
+	   MPP_FUNCTION(0x5, "sata0", "prsnt")),
+	MPP_MODE(56,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "cs2"),
+	   MPP_FUNCTION(0x2, "uart1", "cts"),
+	   MPP_FUNCTION(0x3, "uart0", "cts"),
+	   MPP_FUNCTION(0x4, "spi0", "cs3"),
+	   MPP_FUNCTION(0x5, "pcie", "clkreq0"),
+	   MPP_FUNCTION(0x6, "spi1", "cs1")),
+	MPP_MODE(57,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "cs3"),
+	   MPP_FUNCTION(0x2, "uart1", "rxd"),
+	   MPP_FUNCTION(0x3, "tdm", "fsync"),
+	   MPP_FUNCTION(0x4, "sata0", "prsnt"),
+	   MPP_FUNCTION(0x5, "audio", "sdo")),
+	MPP_MODE(58,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "cs0"),
+	   MPP_FUNCTION(0x2, "uart1", "rts"),
+	   MPP_FUNCTION(0x3, "tdm", "int"),
+	   MPP_FUNCTION(0x5, "audio", "extclk"),
+	   MPP_FUNCTION(0x6, "uart0", "rts")),
+	MPP_MODE(59,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ale0"),
+	   MPP_FUNCTION(0x2, "uart1", "rts"),
+	   MPP_FUNCTION(0x3, "uart0", "rts"),
+	   MPP_FUNCTION(0x5, "audio", "bclk")),
+	MPP_MODE(60,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ale1"),
+	   MPP_FUNCTION(0x2, "uart1", "rxd"),
+	   MPP_FUNCTION(0x3, "sata0", "prsnt"),
+	   MPP_FUNCTION(0x4, "pcie", "rst-out"),
+	   MPP_FUNCTION(0x5, "audio", "sdi")),
+	MPP_MODE(61,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "dev", "wen1"),
+	   MPP_FUNCTION(0x2, "uart1", "txd"),
+	   MPP_FUNCTION(0x5, "audio", "rclk")),
+	MPP_MODE(62,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "a2"),
+	   MPP_FUNCTION(0x2, "uart1", "cts"),
+	   MPP_FUNCTION(0x3, "tdm", "drx"),
+	   MPP_FUNCTION(0x4, "pcie", "clkreq0"),
+	   MPP_FUNCTION(0x5, "audio", "mclk"),
+	   MPP_FUNCTION(0x6, "uart0", "cts")),
+	MPP_MODE(63,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "spi0", "sck"),
+	   MPP_FUNCTION(0x2, "tclk", NULL)),
+	MPP_MODE(64,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "spi0", "miso"),
+	   MPP_FUNCTION(0x2, "spi0-1", "cs1")),
+	MPP_MODE(65,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "spi0", "mosi"),
+	   MPP_FUNCTION(0x2, "spi0-1", "cs2")),
+};
+
+static struct mvebu_pinctrl_soc_info armada_370_pinctrl_info;
+
+static struct of_device_id armada_370_pinctrl_of_match[] __devinitdata = {
+	{ .compatible = "marvell,mv88f6710-pinctrl" },
+	{ },
+};
+
+static struct mvebu_mpp_ctrl mv88f6710_mpp_controls[] = {
+	MPP_REG_CTRL(0, 65),
+};
+
+static struct pinctrl_gpio_range mv88f6710_mpp_gpio_ranges[] = {
+	MPP_GPIO_RANGE(0,   0,  0, 32),
+	MPP_GPIO_RANGE(1,  32, 32, 32),
+	MPP_GPIO_RANGE(2,  64, 64,  2),
+};
+
+static int __devinit armada_370_pinctrl_probe(struct platform_device *pdev)
+{
+	struct mvebu_pinctrl_soc_info *soc = &armada_370_pinctrl_info;
+
+	soc->variant = 0; /* no variants for Armada 370 */
+	soc->controls = mv88f6710_mpp_controls;
+	soc->ncontrols = ARRAY_SIZE(mv88f6710_mpp_controls);
+	soc->modes = mv88f6710_mpp_modes;
+	soc->nmodes = ARRAY_SIZE(mv88f6710_mpp_modes);
+	soc->gpioranges = mv88f6710_mpp_gpio_ranges;
+	soc->ngpioranges = ARRAY_SIZE(mv88f6710_mpp_gpio_ranges);
+
+	pdev->dev.platform_data = soc;
+
+	return mvebu_pinctrl_probe(pdev);
+}
+
+static int __devexit armada_370_pinctrl_remove(struct platform_device *pdev)
+{
+	return mvebu_pinctrl_remove(pdev);
+}
+
+static struct platform_driver armada_370_pinctrl_driver = {
+	.driver = {
+		.name = "armada-370-pinctrl",
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(armada_370_pinctrl_of_match),
+	},
+	.probe = armada_370_pinctrl_probe,
+	.remove = __devexit_p(armada_370_pinctrl_remove),
+};
+
+module_platform_driver(armada_370_pinctrl_driver);
+
+MODULE_AUTHOR("Thomas Petazzoni <thomas.petazzoni@free-electrons.com>");
+MODULE_DESCRIPTION("Marvell Armada 370 pinctrl driver");
+MODULE_LICENSE("GPL v2");
-- 
1.7.10.4

[PATCH v2 9/9] ARM: mvebu: adjust Armada XP evaluation board DTS

From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: 2012-08-22 08:23:33

From: Thomas Petazzoni <redacted>

The Armada XP evaluation board is based on the MV78460 Armava XP
SoC. Now that we have separate .dtsi files for the three different
SoCs of the Armada XP family, use the appropriate one as include for
the Armada XP evaluation board .dts file.

Signed-off-by: Thomas Petazzoni <redacted>
Acked-by: Linus Walleij <redacted>
---
Cc: Thomas Petazzoni <redacted>
Cc: Grant Likely <redacted>
Cc: Rob Herring <redacted>
Cc: Rob Landley <redacted>
Cc: Russell King <redacted>
Cc: Lior Amsalem <redacted>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory CLEMENT <redacted>
Cc: Ben Dooks <redacted>
Cc: Linus Walleij <redacted>
Cc: Stephen Warren <redacted>
Cc: devicetree-discuss at lists.ozlabs.org
Cc: linux-doc at vger.kernel.org
Cc: linux-kernel at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
---
 arch/arm/boot/dts/armada-xp-db.dts |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
index f97040d..b1fc728 100644
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ b/arch/arm/boot/dts/armada-xp-db.dts
@@ -14,11 +14,11 @@
  */
 
 /dts-v1/;
-/include/ "armada-xp.dtsi"
+/include/ "armada-xp-mv78460.dtsi"
 
 / {
 	model = "Marvell Armada XP Evaluation Board";
-	compatible = "marvell,axp-db", "marvell,armadaxp", "marvell,armada-370-xp";
+	compatible = "marvell,axp-db", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
 
 	chosen {
 		bootargs = "console=ttyS0,115200 earlyprintk";
-- 
1.7.10.4

[PATCH v2 8/9] ARM: mvebu: Add pinctrl support to Armada 370 SoC

From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: 2012-08-22 08:23:53

From: Thomas Petazzoni <redacted>

This commits adds the necessary device tree information to define the
compatible property for the pinctrl driver instance of Armada 370 SoC.

Signed-off-by: Thomas Petazzoni <redacted>
Acked-by: Linus Walleij <redacted>
---
Cc: Thomas Petazzoni <redacted>
Cc: Grant Likely <redacted>
Cc: Rob Herring <redacted>
Cc: Rob Landley <redacted>
Cc: Russell King <redacted>
Cc: Lior Amsalem <redacted>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory CLEMENT <redacted>
Cc: Ben Dooks <redacted>
Cc: Linus Walleij <redacted>
Cc: Stephen Warren <redacted>
Cc: devicetree-discuss at lists.ozlabs.org
Cc: linux-doc at vger.kernel.org
Cc: linux-kernel at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
---
 arch/arm/boot/dts/armada-370.dtsi |    4 ++++
 1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 3228ccc..875fcd8 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -31,5 +31,9 @@
 				compatible = "marvell,armada-370-xp-system-controller";
 				reg = <0xd0018200 0x100>;
 		};
+
+                pinctrl at d0018000 {
+			        compatible = "marvell,mv88f6710-pinctrl";
+	        };
 	};
 };
-- 
1.7.10.4

[PATCH v2 7/9] ARM: mvebu: Add pinctrl support to Armada XP SoCs

From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: 2012-08-22 08:24:12

From: Thomas Petazzoni <redacted>

This commits adds the necessary device tree information to define the
compatible property for the pinctrl driver instance of Armada XP SoCs.

Until now, the device tree representation considered the Armada XP as
a single SoC. But in fact, there are three different SoCs in the
Armada XP families, with different number of CPU cores, different
number of Ethernet interfaces... and different number of muxable pins
or functions. We therefore introduce three armada-xp-mv78xx0.dtsi for
the three SoCs of the Armada XP family. The current armada-xp-db.dts
evaluation board uses the MV78460 variant of the SoC.

Signed-off-by: Thomas Petazzoni <redacted>
Acked-by: Linus Walleij <redacted>
---
Cc: Thomas Petazzoni <redacted>
Cc: Grant Likely <redacted>
Cc: Rob Herring <redacted>
Cc: Rob Landley <redacted>
Cc: Russell King <redacted>
Cc: Lior Amsalem <redacted>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory CLEMENT <redacted>
Cc: Ben Dooks <redacted>
Cc: Linus Walleij <redacted>
Cc: Stephen Warren <redacted>
Cc: devicetree-discuss at lists.ozlabs.org
Cc: linux-doc at vger.kernel.org
Cc: linux-kernel at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
---
 arch/arm/boot/dts/armada-xp-mv78230.dtsi |   27 +++++++++++++++++++++++++++
 arch/arm/boot/dts/armada-xp-mv78260.dtsi |   27 +++++++++++++++++++++++++++
 arch/arm/boot/dts/armada-xp-mv78460.dtsi |   27 +++++++++++++++++++++++++++
 3 files changed, 81 insertions(+)
 create mode 100644 arch/arm/boot/dts/armada-xp-mv78230.dtsi
 create mode 100644 arch/arm/boot/dts/armada-xp-mv78260.dtsi
 create mode 100644 arch/arm/boot/dts/armada-xp-mv78460.dtsi
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
new file mode 100644
index 0000000..69ad287
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -0,0 +1,27 @@
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Contains definitions specific to the Armada XP MV78230 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+/include/ "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP family SoC";
+	compatible = "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	soc {
+		pinctrl at d0018000 {
+			compatible = "marvell,mv78230-pinctrl";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
new file mode 100644
index 0000000..0f38fa9
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -0,0 +1,27 @@
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Contains definitions specific to the Armada XP MV78260 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+/include/ "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP family SoC";
+	compatible = "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	soc {
+		pinctrl at d0018000 {
+			compatible = "marvell,mv78260-pinctrl";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
new file mode 100644
index 0000000..9e61836
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -0,0 +1,27 @@
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Contains definitions specific to the Armada XP MV78460 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+/include/ "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP family SoC";
+	compatible = "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	soc {
+		pinctrl at d0018000 {
+			compatible = "marvell,mv78460-pinctrl";
+		};
+	};
+ };
-- 
1.7.10.4

[PATCH v2 6/9] ARM: mvebu: add pinctrl device in DT for Armada 370/XP SoCs

From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: 2012-08-22 08:24:16

From: Thomas Petazzoni <redacted>

The Armada 370 and XP SoCs have configurable muxing for a certain
number of their pins, controlled through a pinctrl driver.

The 'compatible' property is defined in the SoC-specific .dtsi files,
since the compatible string identifies the number of pins and other
SoC-specific properties.

Signed-off-by: Thomas Petazzoni <redacted>
Acked-by: Linus Walleij <redacted>
---
Cc: Thomas Petazzoni <redacted>
Cc: Grant Likely <redacted>
Cc: Rob Herring <redacted>
Cc: Rob Landley <redacted>
Cc: Russell King <redacted>
Cc: Lior Amsalem <redacted>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory CLEMENT <redacted>
Cc: Ben Dooks <redacted>
Cc: Linus Walleij <redacted>
Cc: Stephen Warren <redacted>
Cc: devicetree-discuss at lists.ozlabs.org
Cc: linux-doc at vger.kernel.org
Cc: linux-kernel at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
---
 arch/arm/boot/dts/armada-370-xp.dtsi |    7 +++++++
 1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 16cc82c..54a944a 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -68,6 +68,13 @@
 			compatible = "marvell,armada-addr-decoding-controller";
 			reg = <0xd0020000 0x258>;
 		};
+
+                pinctrl at d0018000 {
+                               reg = <0xd0018000 0x38>;
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               ranges;
+                };
 	};
 };
 
-- 
1.7.10.4

[PATCH v2 5/9] pinctrl: mvebu: add pinctrl driver for Armada XP

From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: 2012-08-22 08:24:22

From: Thomas Petazzoni <redacted>

This pinctrl driver is not a full-blown pinctrl driver from scratch:
it relies on the common pinctrl-mvebu driver, which is used for all
Marvell EBU SoCs.

Signed-off-by: Thomas Petazzoni <redacted>
---
v2: replaced variant with enum and used bitops.h

Cc: Thomas Petazzoni <redacted>
Cc: Grant Likely <redacted>
Cc: Rob Herring <redacted>
Cc: Rob Landley <redacted>
Cc: Russell King <redacted>
Cc: Lior Amsalem <redacted>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory CLEMENT <redacted>
Cc: Ben Dooks <redacted>
Cc: Linus Walleij <redacted>
Cc: Stephen Warren <redacted>
Cc: devicetree-discuss at lists.ozlabs.org
Cc: linux-doc at vger.kernel.org
Cc: linux-kernel at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
---
 .../bindings/pinctrl/marvell,armada-xp-pinctrl.txt |  100 +++++
 drivers/pinctrl/Kconfig                            |    4 +
 drivers/pinctrl/Makefile                           |    1 +
 drivers/pinctrl/pinctrl-armada-xp.c                |  468 ++++++++++++++++++++
 4 files changed, 573 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt
 create mode 100644 drivers/pinctrl/pinctrl-armada-xp.c
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt
new file mode 100644
index 0000000..bfa0a2e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt
@@ -0,0 +1,100 @@
+* Marvell Armada XP SoC pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "marvell,mv78230-pinctrl", "marvell,mv78260-pinctrl",
+              "marvell,mv78460-pinctrl"
+
+This driver supports all Armada XP variants, i.e. mv78230, mv78260, and mv78460.
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+* Marvell Armada XP (all variants)
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, ge0(txclko), lcd(d0)
+mpp1          1        gpio, ge0(txd0), lcd(d1)
+mpp2          2        gpio, ge0(txd1), lcd(d2)
+mpp3          3        gpio, ge0(txd2), lcd(d3)
+mpp4          4        gpio, ge0(txd3), lcd(d4)
+mpp5          5        gpio, ge0(txctl), lcd(d5)
+mpp6          6        gpio, ge0(rxd0), lcd(d6)
+mpp7          7        gpio, ge0(rxd1), lcd(d7)
+mpp8          8        gpio, ge0(rxd2), lcd(d8)
+mpp9          9        gpio, ge0(rxd3), lcd(d9)
+mpp10         10       gpio, ge0(rxctl), lcd(d10)
+mpp11         11       gpio, ge0(rxclk), lcd(d11)
+mpp12         12       gpio, ge0(txd4), ge1(txd0), lcd(d12)
+mpp13         13       gpio, ge0(txd5), ge1(txd1), lcd(d13)
+mpp14         14       gpio, ge0(txd6), ge1(txd2), lcd(d15)
+mpp15         15       gpio, ge0(txd7), ge1(txd3), lcd(d16)
+mpp16         16       gpio, ge0(txd7), ge1(txd3), lcd(d16)
+mpp17         17       gpio, ge0(col), ge1(txctl), lcd(d17)
+mpp18         18       gpio, ge0(rxerr), ge1(rxd0), lcd(d18), ptp(trig)
+mpp19         19       gpio, ge0(crs), ge1(rxd1), lcd(d19), ptp(evreq)
+mpp20         20       gpio, ge0(rxd4), ge1(rxd2), lcd(d20), ptp(clk)
+mpp21         21       gpio, ge0(rxd5), ge1(rxd3), lcd(d21), mem(bat)
+mpp22         22       gpio, ge0(rxd6), ge1(rxctl), lcd(d22), sata0(prsnt)
+mpp23         23       gpio, ge0(rxd7), ge1(rxclk), lcd(d23), sata1(prsnt)
+mpp24         24       gpio, lcd(hsync), sata1(prsnt), nf(bootcs-re), tdm(rst)
+mpp25         25       gpio, lcd(vsync), sata0(prsnt), nf(bootcs-we), tdm(pclk)
+mpp26         26       gpio, lcd(clk), tdm(fsync), vdd(cpu1-pd)
+mpp27         27       gpio, lcd(e), tdm(dtx), ptp(trig)
+mpp28         28       gpio, lcd(pwm), tdm(drx), ptp(evreq)
+mpp29         29       gpio, lcd(ref-clk), tdm(int0), ptp(clk), vdd(cpu0-pd)
+mpp30         30       gpio, tdm(int1), sd0(clk)
+mpp31         31       gpio, tdm(int2), sd0(cmd), vdd(cpu0-pd)
+mpp32         32       gpio, tdm(int3), sd0(d0), vdd(cpu1-pd)
+mpp33         33       gpio, tdm(int4), sd0(d1), mem(bat)
+mpp34         34       gpio, tdm(int5), sd0(d2), sata0(prsnt)
+mpp35         35       gpio, tdm(int6), sd0(d3), sata1(prsnt)
+mpp36         36       gpio, spi(mosi)
+mpp37         37       gpio, spi(miso)
+mpp38         38       gpio, spi(sck)
+mpp39         39       gpio, spi(cs0)
+mpp40         40       gpio, spi(cs1), uart2(cts), lcd(vga-hsync), vdd(cpu1-pd),
+                       pcie(clkreq0)
+mpp41         41       gpio, spi(cs2), uart2(rts), lcd(vga-vsync), sata1(prsnt),
+                       pcie(clkreq1)
+mpp42         42       gpio, uart2(rxd), uart0(cts), tdm(int7), tdm-1(timer),
+                       vdd(cpu0-pd)
+mpp43         43       gpio, uart2(txd), uart0(rts), spi(cs3), pcie(rstout),
+                       vdd(cpu2-3-pd){1}
+mpp44         44       gpio, uart2(cts), uart3(rxd), spi(cs4), pcie(clkreq2),
+                       mem(bat)
+mpp45         45       gpio, uart2(rts), uart3(txd), spi(cs5), sata1(prsnt)
+mpp46         46       gpio, uart3(rts), uart1(rts), spi(cs6), sata0(prsnt)
+mpp47         47       gpio, uart3(cts), uart1(cts), spi(cs7), pcie(clkreq3),
+                       ref(clkout)
+mpp48         48       gpio, tclk, dev(burst/last)
+
+* Marvell Armada XP (mv78260 and mv78460 only)
+
+name          pins     functions
+================================================================================
+mpp49         49       gpio, dev(we3)
+mpp50         50       gpio, dev(we2)
+mpp51         51       gpio, dev(ad16)
+mpp52         52       gpio, dev(ad17)
+mpp53         53       gpio, dev(ad18)
+mpp54         54       gpio, dev(ad19)
+mpp55         55       gpio, dev(ad20), vdd(cpu0-pd)
+mpp56         56       gpio, dev(ad21), vdd(cpu1-pd)
+mpp57         57       gpio, dev(ad22), vdd(cpu2-3-pd){1}
+mpp58         58       gpio, dev(ad23)
+mpp59         59       gpio, dev(ad24)
+mpp60         60       gpio, dev(ad25)
+mpp61         61       gpio, dev(ad26)
+mpp62         62       gpio, dev(ad27)
+mpp63         63       gpio, dev(ad28)
+mpp64         64       gpio, dev(ad29)
+mpp65         65       gpio, dev(ad30)
+mpp66         66       gpio, dev(ad31)
+
+Notes:
+* {1} vdd(cpu2-3-pd) only available on mv78460.
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index e16b8b0..a754144 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -163,6 +163,10 @@ config PINCTRL_ARMADA_370
 	bool
 	select PINCTRL_MVEBU
 
+config PINCTRL_ARMADA_XP
+	bool
+	select PINCTRL_MVEBU
+
 source "drivers/pinctrl/spear/Kconfig"
 
 endmenu
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index e6d6667..f2ea050 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -33,5 +33,6 @@ obj-$(CONFIG_PINCTRL_MVEBU)	+= pinctrl-mvebu.o
 obj-$(CONFIG_PINCTRL_DOVE)	+= pinctrl-dove.o
 obj-$(CONFIG_PINCTRL_KIRKWOOD)	+= pinctrl-kirkwood.o
 obj-$(CONFIG_PINCTRL_ARMADA_370) += pinctrl-armada-370.o
+obj-$(CONFIG_PINCTRL_ARMADA_XP)  += pinctrl-armada-xp.o
 
 obj-$(CONFIG_PLAT_SPEAR)	+= spear/
diff --git a/drivers/pinctrl/pinctrl-armada-xp.c b/drivers/pinctrl/pinctrl-armada-xp.c
new file mode 100644
index 0000000..40bd52a
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-armada-xp.c
@@ -0,0 +1,468 @@
+/*
+ * Marvell Armada XP pinctrl driver based on mvebu pinctrl core
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This file supports the three variants of Armada XP SoCs that are
+ * available: mv78230, mv78260 and mv78460. From a pin muxing
+ * perspective, the mv78230 has 49 MPP pins. The mv78260 and mv78460
+ * both have 67 MPP pins (more GPIOs and address lines for the memory
+ * bus mainly). The only difference between the mv78260 and the
+ * mv78460 in terms of pin muxing is the addition of two functions on
+ * pins 43 and 56 to access the VDD of the CPU2 and 3 (mv78260 has two
+ * cores, mv78460 has four cores).
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/bitops.h>
+
+#include "pinctrl-mvebu.h"
+
+enum armada_xp_variant {
+	V_MV78230	= BIT(0),
+	V_MV78260	= BIT(1),
+	V_MV78460	= BIT(2),
+	V_MV78230_PLUS	= (V_MV78230 | V_MV78260 | V_MV78460),
+	V_MV78260_PLUS	= (V_MV78260 | V_MV78460),
+};
+
+static struct mvebu_mpp_mode armada_xp_mpp_modes[] = {
+	MPP_MODE(0,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "txclko",     V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d0",         V_MV78230_PLUS)),
+	MPP_MODE(1,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "txd0",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d1",         V_MV78230_PLUS)),
+	MPP_MODE(2,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "txd1",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d2",         V_MV78230_PLUS)),
+	MPP_MODE(3,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "txd2",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d3",         V_MV78230_PLUS)),
+	MPP_MODE(4,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "txd3",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d4",         V_MV78230_PLUS)),
+	MPP_MODE(5,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "txctl",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d5",         V_MV78230_PLUS)),
+	MPP_MODE(6,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "rxd0",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d6",         V_MV78230_PLUS)),
+	MPP_MODE(7,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "rxd1",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d7",         V_MV78230_PLUS)),
+	MPP_MODE(8,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "rxd2",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d8",         V_MV78230_PLUS)),
+	MPP_MODE(9,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "rxd3",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d9",         V_MV78230_PLUS)),
+	MPP_MODE(10,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "rxctl",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d10",        V_MV78230_PLUS)),
+	MPP_MODE(11,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "rxclk",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d11",        V_MV78230_PLUS)),
+	MPP_MODE(12,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "txd4",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "ge1", "clkout",     V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d12",        V_MV78230_PLUS)),
+	MPP_MODE(13,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "txd5",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "ge1", "txd0",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d13",        V_MV78230_PLUS)),
+	MPP_MODE(14,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "txd6",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "ge1", "txd1",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d14",        V_MV78230_PLUS)),
+	MPP_MODE(15,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "txd7",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "ge1", "txd2",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d15",        V_MV78230_PLUS)),
+	MPP_MODE(16,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "txclk",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "ge1", "txd3",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d16",        V_MV78230_PLUS)),
+	MPP_MODE(17,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "col",        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "ge1", "txctl",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d17",        V_MV78230_PLUS)),
+	MPP_MODE(18,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "rxerr",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "ge1", "rxd0",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "ptp", "trig",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d18",        V_MV78230_PLUS)),
+	MPP_MODE(19,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "crs",        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "ge1", "rxd1",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "ptp", "evreq",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d19",        V_MV78230_PLUS)),
+	MPP_MODE(20,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "rxd4",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "ge1", "rxd2",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "ptp", "clk",        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d20",        V_MV78230_PLUS)),
+	MPP_MODE(21,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "rxd5",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "ge1", "rxd3",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "mem", "bat",        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d21",        V_MV78230_PLUS)),
+	MPP_MODE(22,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "rxd6",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "ge1", "rxctl",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "sata0", "prsnt",    V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d22",        V_MV78230_PLUS)),
+	MPP_MODE(23,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ge0", "rxd7",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "ge1", "rxclk",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "sata1", "prsnt",    V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "d23",        V_MV78230_PLUS)),
+	MPP_MODE(24,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "sata1", "prsnt",    V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "nf", "bootcs-re",   V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "tdm", "rst",        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "hsync",      V_MV78230_PLUS)),
+	MPP_MODE(25,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "sata0", "prsnt",    V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "nf", "bootcs-we",   V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "tdm", "pclk",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "vsync",      V_MV78230_PLUS)),
+	MPP_MODE(26,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "tdm", "fsync",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "clk",        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x5, "vdd", "cpu1-pd",    V_MV78230_PLUS)),
+	MPP_MODE(27,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ptp", "trig",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "tdm", "dtx",        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "e",          V_MV78230_PLUS)),
+	MPP_MODE(28,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ptp", "evreq",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "tdm", "drx",        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "pwm",        V_MV78230_PLUS)),
+	MPP_MODE(29,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "ptp", "clk",        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "tdm", "int0",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "ref-clk",    V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x5, "vdd", "cpu0-pd",    V_MV78230_PLUS)),
+	MPP_MODE(30,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "sd0", "clk",        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "tdm", "int1",       V_MV78230_PLUS)),
+	MPP_MODE(31,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "sd0", "cmd",        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "tdm", "int2",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x5, "vdd", "cpu0-pd",    V_MV78230_PLUS)),
+	MPP_MODE(32,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "sd0", "d0",         V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "tdm", "int3",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x5, "vdd", "cpu1-pd",    V_MV78230_PLUS)),
+	MPP_MODE(33,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "sd0", "d1",         V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "tdm", "int4",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "mem", "bat",        V_MV78230_PLUS)),
+	MPP_MODE(34,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "sd0", "d2",         V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "sata0", "prsnt",    V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "tdm", "int5",       V_MV78230_PLUS)),
+	MPP_MODE(35,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "sd0", "d3",         V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "sata1", "prsnt",    V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "tdm", "int6",       V_MV78230_PLUS)),
+	MPP_MODE(36,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "spi", "mosi",       V_MV78230_PLUS)),
+	MPP_MODE(37,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "spi", "miso",       V_MV78230_PLUS)),
+	MPP_MODE(38,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "spi", "sck",        V_MV78230_PLUS)),
+	MPP_MODE(39,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "spi", "cs0",        V_MV78230_PLUS)),
+	MPP_MODE(40,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "spi", "cs1",        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "uart2", "cts",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "vdd", "cpu1-pd",    V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "vga-hsync",  V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x5, "pcie", "clkreq0",   V_MV78230_PLUS)),
+	MPP_MODE(41,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "spi", "cs2",        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "uart2", "rts",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "sata1", "prsnt",    V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "vga-vsync",  V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x5, "pcie", "clkreq1",   V_MV78230_PLUS)),
+	MPP_MODE(42,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "uart2", "rxd",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "uart0", "cts",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "tdm", "int7",       V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "tdm-1", "timer",    V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x5, "vdd", "cpu0-pd",    V_MV78230_PLUS)),
+	MPP_MODE(43,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "uart2", "txd",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "uart0", "rts",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "spi", "cs3",        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "pcie", "rstout",    V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x5, "vdd", "cpu2-3-pd",  V_MV78460)),
+	MPP_MODE(44,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "uart2", "cts",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "uart3", "rxd",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "spi", "cs4",        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "mem", "bat",        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x5, "pcie", "clkreq2",   V_MV78230_PLUS)),
+	MPP_MODE(45,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "uart2", "rts",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "uart3", "txd",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "spi", "cs5",        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "sata1", "prsnt",    V_MV78230_PLUS)),
+	MPP_MODE(46,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "uart3", "rts",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "uart1", "rts",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "spi", "cs6",        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "sata0", "prsnt",    V_MV78230_PLUS)),
+	MPP_MODE(47,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "uart3", "cts",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "uart1", "cts",      V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x3, "spi", "cs7",        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x4, "ref", "clkout",     V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x5, "pcie", "clkreq3",   V_MV78230_PLUS)),
+	MPP_MODE(48,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "tclk", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "dev", "burst/last", V_MV78230_PLUS)),
+	MPP_MODE(49,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78260_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "dev", "we3",        V_MV78260_PLUS)),
+	MPP_MODE(50,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78260_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "dev", "we2",        V_MV78260_PLUS)),
+	MPP_MODE(51,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78260_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "dev", "ad16",       V_MV78260_PLUS)),
+	MPP_MODE(52,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78260_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "dev", "ad17",       V_MV78260_PLUS)),
+	MPP_MODE(53,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78260_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "dev", "ad18",       V_MV78260_PLUS)),
+	MPP_MODE(54,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78260_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "dev", "ad19",       V_MV78260_PLUS)),
+	MPP_MODE(55,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78260_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "dev", "ad20",       V_MV78260_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "vdd", "cpu0-pd",    V_MV78260_PLUS)),
+	MPP_MODE(56,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78260_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "dev", "ad21",       V_MV78260_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "vdd", "cpu1-pd",    V_MV78260_PLUS)),
+	MPP_MODE(57,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78260_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "dev", "ad22",       V_MV78260_PLUS),
+		 MPP_VAR_FUNCTION(0x2, "vdd", "cpu2-3-pd",  V_MV78460)),
+	MPP_MODE(58,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78260_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "dev", "ad23",       V_MV78260_PLUS)),
+	MPP_MODE(59,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78260_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "dev", "ad24",       V_MV78260_PLUS)),
+	MPP_MODE(60,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78260_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "dev", "ad25",       V_MV78260_PLUS)),
+	MPP_MODE(61,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78260_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "dev", "ad26",       V_MV78260_PLUS)),
+	MPP_MODE(62,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78260_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "dev", "ad27",       V_MV78260_PLUS)),
+	MPP_MODE(63,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78260_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "dev", "ad28",       V_MV78260_PLUS)),
+	MPP_MODE(64,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78260_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "dev", "ad29",       V_MV78260_PLUS)),
+	MPP_MODE(65,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78260_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "dev", "ad30",       V_MV78260_PLUS)),
+	MPP_MODE(66,
+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78260_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "dev", "ad31",       V_MV78260_PLUS)),
+};
+
+static struct mvebu_pinctrl_soc_info armada_xp_pinctrl_info;
+
+static struct of_device_id armada_xp_pinctrl_of_match[] __devinitdata = {
+	{
+		.compatible = "marvell,mv78230-pinctrl",
+		.data       = (void *) V_MV78230,
+	},
+	{
+		.compatible = "marvell,mv78260-pinctrl",
+		.data       = (void *) V_MV78260,
+	},
+	{
+		.compatible = "marvell,mv78460-pinctrl",
+		.data       = (void *) V_MV78460,
+	},
+	{ },
+};
+
+static struct mvebu_mpp_ctrl mv78230_mpp_controls[] = {
+	MPP_REG_CTRL(0, 48),
+};
+
+static struct pinctrl_gpio_range mv78230_mpp_gpio_ranges[] = {
+	MPP_GPIO_RANGE(0,   0,  0, 32),
+	MPP_GPIO_RANGE(1,  32, 32, 17),
+};
+
+static struct mvebu_mpp_ctrl mv78260_mpp_controls[] = {
+	MPP_REG_CTRL(0, 66),
+};
+
+static struct pinctrl_gpio_range mv78260_mpp_gpio_ranges[] = {
+	MPP_GPIO_RANGE(0,   0,  0, 32),
+	MPP_GPIO_RANGE(1,  32, 32, 32),
+	MPP_GPIO_RANGE(2,  64, 64,  3),
+};
+
+static struct mvebu_mpp_ctrl mv78460_mpp_controls[] = {
+	MPP_REG_CTRL(0, 66),
+};
+
+static struct pinctrl_gpio_range mv78460_mpp_gpio_ranges[] = {
+	MPP_GPIO_RANGE(0,   0,  0, 32),
+	MPP_GPIO_RANGE(1,  32, 32, 32),
+	MPP_GPIO_RANGE(2,  64, 64,  3),
+};
+
+static int __devinit armada_xp_pinctrl_probe(struct platform_device *pdev)
+{
+	struct mvebu_pinctrl_soc_info *soc = &armada_xp_pinctrl_info;
+	const struct of_device_id *match =
+		of_match_device(armada_xp_pinctrl_of_match, &pdev->dev);
+
+	if (!match)
+		return -ENODEV;
+
+	soc->variant = (unsigned) match->data & 0xff;
+
+	switch (soc->variant) {
+	case V_MV78230:
+		soc->controls = mv78230_mpp_controls;
+		soc->ncontrols = ARRAY_SIZE(mv78230_mpp_controls);
+		soc->modes = armada_xp_mpp_modes;
+		/* We don't necessarily want the full list of the
+		 * armada_xp_mpp_modes, but only the first 'n' ones
+		 * that are available on this SoC */
+		soc->nmodes = mv78230_mpp_controls[0].npins;
+		soc->gpioranges = mv78230_mpp_gpio_ranges;
+		soc->ngpioranges = ARRAY_SIZE(mv78230_mpp_gpio_ranges);
+		break;
+	case V_MV78260:
+		soc->controls = mv78260_mpp_controls;
+		soc->ncontrols = ARRAY_SIZE(mv78260_mpp_controls);
+		soc->modes = armada_xp_mpp_modes;
+		/* We don't necessarily want the full list of the
+		 * armada_xp_mpp_modes, but only the first 'n' ones
+		 * that are available on this SoC */
+		soc->nmodes = mv78260_mpp_controls[0].npins;
+		soc->gpioranges = mv78260_mpp_gpio_ranges;
+		soc->ngpioranges = ARRAY_SIZE(mv78260_mpp_gpio_ranges);
+		break;
+	case V_MV78460:
+		soc->controls = mv78460_mpp_controls;
+		soc->ncontrols = ARRAY_SIZE(mv78460_mpp_controls);
+		soc->modes = armada_xp_mpp_modes;
+		/* We don't necessarily want the full list of the
+		 * armada_xp_mpp_modes, but only the first 'n' ones
+		 * that are available on this SoC */
+		soc->nmodes = mv78460_mpp_controls[0].npins;
+		soc->gpioranges = mv78460_mpp_gpio_ranges;
+		soc->ngpioranges = ARRAY_SIZE(mv78460_mpp_gpio_ranges);
+		break;
+	}
+
+	pdev->dev.platform_data = soc;
+
+	return mvebu_pinctrl_probe(pdev);
+}
+
+static int __devexit armada_xp_pinctrl_remove(struct platform_device *pdev)
+{
+	return mvebu_pinctrl_remove(pdev);
+}
+
+static struct platform_driver armada_xp_pinctrl_driver = {
+	.driver = {
+		.name = "armada-xp-pinctrl",
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(armada_xp_pinctrl_of_match),
+	},
+	.probe = armada_xp_pinctrl_probe,
+	.remove = __devexit_p(armada_xp_pinctrl_remove),
+};
+
+module_platform_driver(armada_xp_pinctrl_driver);
+
+MODULE_AUTHOR("Thomas Petazzoni <thomas.petazzoni@free-electrons.com>");
+MODULE_DESCRIPTION("Marvell Armada XP pinctrl driver");
+MODULE_LICENSE("GPL v2");
-- 
1.7.10.4

[PATCH v2 2/9] pinctrl: mvebu: dove pinctrl driver

From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: 2012-08-22 08:25:32

This patch adds a SoC specific pinctrl driver for Marvell Dove SoCs
plus DT binding documentation. This driver will use the mvebu pinctrl
driver core.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
v2:
- restructured pinctrl/Kconfig to hide pinctrl driver as it will be
  always selected by arch/arm/mach-mvebu/Kconfig
- cleaned pinctrl-dove and replaced 'magic numbers' by defines
- use devm_clk_get for (now optional) pdma clock and add to required
  properties in devicetree binding documentation

Cc: Thomas Petazzoni <redacted>
Cc: Grant Likely <redacted>
Cc: Rob Herring <redacted>
Cc: Rob Landley <redacted>
Cc: Russell King <redacted>
Cc: Lior Amsalem <redacted>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory CLEMENT <redacted>
Cc: Ben Dooks <redacted>
Cc: Linus Walleij <redacted>
Cc: Stephen Warren <redacted>
Cc: devicetree-discuss at lists.ozlabs.org
Cc: linux-doc at vger.kernel.org
Cc: linux-kernel at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
---
 .../bindings/pinctrl/marvell,dove-pinctrl.txt      |   72 +++
 drivers/pinctrl/Kconfig                            |    4 +
 drivers/pinctrl/Makefile                           |    1 +
 drivers/pinctrl/pinctrl-dove.c                     |  622 ++++++++++++++++++++
 4 files changed, 699 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt
 create mode 100644 drivers/pinctrl/pinctrl-dove.c
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt
new file mode 100644
index 0000000..a648aaa
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt
@@ -0,0 +1,72 @@
+* Marvell Dove SoC pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "marvell,dove-pinctrl"
+- clocks: (optional) phandle of pdma clock
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, pmu, uart2(rts), sdio0(cd), lcd0(pwm)
+mpp1          1        gpio, pmu, uart2(cts), sdio0(wp), lcd1(pwm)
+mpp2          2        gpio, pmu, uart2(txd), sdio0(buspwr), sata(prsnt),
+                       uart1(rts)
+mpp3          3        gpio, pmu, uart2(rxd), sdio0(ledctrl), sata(act),
+                       uart1(cts), lcd-spi(cs1)
+mpp4          4        gpio, pmu, uart3(rts), sdio1(cd), spi1(miso)
+mpp5          5        gpio, pmu, uart3(cts), sdio1(wp), spi1(cs)
+mpp6          6        gpio, pmu, uart3(txd), sdio1(buspwr), spi1(mosi)
+mpp7          7        gpio, pmu, uart3(rxd), sdio1(ledctrl), spi1(sck)
+mpp8          8        gpio, pmu, watchdog(rstout)
+mpp9          9        gpio, pmu, pex1(clkreq)
+mpp10         10       gpio, pmu, ssp(sclk)
+mpp11         11       gpio, pmu, sata(prsnt), sata-1(act), sdio0(ledctrl),
+                       sdio1(ledctrl), pex0(clkreq)
+mpp12         12       gpio, pmu, uart2(rts), audio0(extclk), sdio1(cd), sata(act)
+mpp13         13       gpio, pmu, uart2(cts), audio1(extclk), sdio1(wp),
+                       ssp(extclk)
+mpp14         14       gpio, pmu, uart2(txd), sdio1(buspwr), ssp(rxd)
+mpp15         15       gpio, pmu, uart2(rxd), sdio1(ledctrl), ssp(sfrm)
+mpp16         16       gpio, uart3(rts), sdio0(cd), ac97(sdi1), lcd-spi(cs1)
+mpp17         17       gpio, uart3(cts), sdio0(wp), ac97(sdi2), twsi(sda),
+                       ac97-1(sysclko)
+mpp18         18       gpio, uart3(txd), sdio0(buspwr), ac97(sdi3), lcd0(pwm)
+mpp19         19       gpio, uart3(rxd), sdio0(ledctrl), twsi(sck)
+mpp20         20       gpio, sdio0(cd), sdio1(cd), spi1(miso), lcd-spi(miso),
+                       ac97(sysclko)
+mpp21         21       gpio, sdio0(wp), sdio1(wp), spi1(cs), lcd-spi(cs0),
+                       uart1(cts), ssp(sfrm)
+mpp22         22       gpio, sdio0(buspwr), sdio1(buspwr), spi1(mosi),
+                       lcd-spi(mosi), uart1(cts), ssp(txd)
+mpp23         23       gpio, sdio0(ledctrl), sdio1(ledctrl), spi1(sck),
+                       lcd-spi(sck), ssp(sclk)
+mpp_camera    24-39    gpio, camera
+mpp_sdio0     40-45    gpio, sdio0
+mpp_sdio1     46-51    gpio, sdio1
+mpp_audio1    52-57    gpio, i2s1/spdifo, i2s1, spdifo, twsi, ssp/spdifo, ssp,
+                       ssp/twsi
+mpp_spi0      58-61    gpio, spi0
+mpp_uart1     62-63    gpio, uart1
+mpp_nand      64-71    gpo, nand
+audio0        -        i2s, ac97
+twsi          -        none, opt1, opt2, opt3
+
+Notes:
+* group "mpp_audio1" allows the following functions and gpio pins:
+  - gpio          : gpio on pins 52-57
+  - i2s1/spdifo   : audio1 i2s on pins 52-55 and spdifo on 57, no gpios
+  - i2s1          : audio1 i2s on pins 52-55, gpio on pins 56,57
+  - spdifo        : spdifo on pin 57, gpio on pins 52-55
+  - twsi          : twsi on pins 56,57, gpio on pins 52-55
+  - ssp/spdifo    : ssp on pins 52-55, spdifo on pin 57, no gpios
+  - ssp           : ssp on pins 52-55, gpio on pins 56,57
+  - ssp/twsi      : ssp on pins 52-55, twsi on pins 56,57, no gpios
+* group "audio0" internally muxes i2s0 or ac97 controller to the dedicated
+  audio0 pins.
+* group "twsi" internally muxes twsi controller to the dedicated or option pins.
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 20bfdc3..f15eba4 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -151,6 +151,10 @@ config PINCTRL_MVEBU
 	select PINMUX
 	select PINCONF
 
+config PINCTRL_DOVE
+	bool
+	select PINCTRL_MVEBU
+
 source "drivers/pinctrl/spear/Kconfig"
 
 endmenu
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 007ed32..d1327df 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -30,5 +30,6 @@ obj-$(CONFIG_PINCTRL_TEGRA30)	+= pinctrl-tegra30.o
 obj-$(CONFIG_PINCTRL_U300)	+= pinctrl-u300.o
 obj-$(CONFIG_PINCTRL_COH901)	+= pinctrl-coh901.o
 obj-$(CONFIG_PINCTRL_MVEBU)	+= pinctrl-mvebu.o
+obj-$(CONFIG_PINCTRL_DOVE)	+= pinctrl-dove.o
 
 obj-$(CONFIG_PLAT_SPEAR)	+= spear/
diff --git a/drivers/pinctrl/pinctrl-dove.c b/drivers/pinctrl/pinctrl-dove.c
new file mode 100644
index 0000000..cb31b63
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-dove.c
@@ -0,0 +1,622 @@
+/*
+ * Marvell Dove pinctrl driver based on mvebu pinctrl core
+ *
+ * Author: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/bitops.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-mvebu.h"
+
+#define DOVE_SB_REGS_VIRT_BASE		0xfde00000
+#define DOVE_MPP_VIRT_BASE		(DOVE_SB_REGS_VIRT_BASE | 0xd0200)
+#define DOVE_PMU_MPP_GENERAL_CTRL	(DOVE_MPP_VIRT_BASE + 0x10)
+#define  DOVE_AU0_AC97_SEL		BIT(16)
+#define DOVE_GLOBAL_CONFIG_1		(DOVE_SB_REGS_VIRT_BASE | 0xe802C)
+#define  DOVE_TWSI_ENABLE_OPTION1	BIT(7)
+#define DOVE_GLOBAL_CONFIG_2		(DOVE_SB_REGS_VIRT_BASE | 0xe8030)
+#define  DOVE_TWSI_ENABLE_OPTION2	BIT(20)
+#define  DOVE_TWSI_ENABLE_OPTION3	BIT(21)
+#define  DOVE_TWSI_OPTION3_GPIO		BIT(22)
+#define DOVE_SSP_CTRL_STATUS_1		(DOVE_SB_REGS_VIRT_BASE | 0xe8034)
+#define  DOVE_SSP_ON_AU1		BIT(0)
+#define DOVE_MPP_GENERAL_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xe803c)
+#define  DOVE_AU1_SPDIFO_GPIO_EN	BIT(1)
+#define  DOVE_NAND_GPIO_EN		BIT(0)
+#define DOVE_GPIO_LO_VIRT_BASE		(DOVE_SB_REGS_VIRT_BASE | 0xd0400)
+#define DOVE_MPP_CTRL4_VIRT_BASE	(DOVE_GPIO_LO_VIRT_BASE + 0x40)
+#define  DOVE_SPI_GPIO_SEL		BIT(5)
+#define  DOVE_UART1_GPIO_SEL		BIT(4)
+#define  DOVE_AU1_GPIO_SEL		BIT(3)
+#define  DOVE_CAM_GPIO_SEL		BIT(2)
+#define  DOVE_SD1_GPIO_SEL		BIT(1)
+#define  DOVE_SD0_GPIO_SEL		BIT(0)
+
+#define MPPS_PER_REG	8
+#define MPP_BITS	4
+#define MPP_MASK	0xf
+
+#define CONFIG_PMU	BIT(4)
+
+static int dove_pmu_mpp_ctrl_get(struct mvebu_mpp_ctrl *ctrl,
+				 unsigned long *config)
+{
+	unsigned off = (ctrl->pid / MPPS_PER_REG) * MPP_BITS;
+	unsigned shift = (ctrl->pid % MPPS_PER_REG) * MPP_BITS;
+	unsigned long pmu = readl(DOVE_PMU_MPP_GENERAL_CTRL);
+	unsigned long mpp = readl(DOVE_MPP_VIRT_BASE + off);
+
+	if (pmu & (1 << ctrl->pid))
+		*config = CONFIG_PMU;
+	else
+		*config = (mpp >> shift) & MPP_MASK;
+	return 0;
+}
+
+static int dove_pmu_mpp_ctrl_set(struct mvebu_mpp_ctrl *ctrl,
+				 unsigned long config)
+{
+	unsigned off = (ctrl->pid / MPPS_PER_REG) * MPP_BITS;
+	unsigned shift = (ctrl->pid % MPPS_PER_REG) * MPP_BITS;
+	unsigned long pmu = readl(DOVE_PMU_MPP_GENERAL_CTRL);
+	unsigned long mpp = readl(DOVE_MPP_VIRT_BASE + off);
+
+	if (config == CONFIG_PMU)
+		writel(pmu | (1 << ctrl->pid), DOVE_PMU_MPP_GENERAL_CTRL);
+	else {
+		writel(pmu & ~(1 << ctrl->pid), DOVE_PMU_MPP_GENERAL_CTRL);
+		mpp &= ~(MPP_MASK << shift);
+		mpp |= config << shift;
+		writel(mpp, DOVE_MPP_VIRT_BASE + off);
+	}
+	return 0;
+}
+
+static int dove_mpp4_ctrl_get(struct mvebu_mpp_ctrl *ctrl,
+			      unsigned long *config)
+{
+	unsigned long mpp4 = readl(DOVE_MPP_CTRL4_VIRT_BASE);
+	unsigned long mask;
+
+	switch (ctrl->pid) {
+	case 24: /* mpp_camera */
+		mask = DOVE_CAM_GPIO_SEL;
+		break;
+	case 40: /* mpp_sdio0 */
+		mask = DOVE_SD0_GPIO_SEL;
+		break;
+	case 46: /* mpp_sdio1 */
+		mask = DOVE_SD1_GPIO_SEL;
+		break;
+	case 58: /* mpp_spi0 */
+		mask = DOVE_SPI_GPIO_SEL;
+		break;
+	case 62: /* mpp_uart1 */
+		mask = DOVE_UART1_GPIO_SEL;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	*config = ((mpp4 & mask) != 0);
+
+	return 0;
+}
+
+static int dove_mpp4_ctrl_set(struct mvebu_mpp_ctrl *ctrl,
+			      unsigned long config)
+{
+	unsigned long mpp4 = readl(DOVE_MPP_CTRL4_VIRT_BASE);
+	unsigned long mask;
+
+	switch (ctrl->pid) {
+	case 24: /* mpp_camera */
+		mask = DOVE_CAM_GPIO_SEL;
+		break;
+	case 40: /* mpp_sdio0 */
+		mask = DOVE_SD0_GPIO_SEL;
+		break;
+	case 46: /* mpp_sdio1 */
+		mask = DOVE_SD1_GPIO_SEL;
+		break;
+	case 58: /* mpp_spi0 */
+		mask = DOVE_SPI_GPIO_SEL;
+		break;
+	case 62: /* mpp_uart1 */
+		mask = DOVE_UART1_GPIO_SEL;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	mpp4 &= ~mask;
+	if (config)
+		mpp4 |= mask;
+
+	writel(mpp4, DOVE_MPP_CTRL4_VIRT_BASE);
+
+	return 0;
+}
+
+static int dove_nand_ctrl_get(struct mvebu_mpp_ctrl *ctrl,
+			      unsigned long *config)
+{
+	unsigned long gmpp = readl(DOVE_MPP_GENERAL_VIRT_BASE);
+
+	*config = ((gmpp & DOVE_NAND_GPIO_EN) != 0);
+
+	return 0;
+}
+
+static int dove_nand_ctrl_set(struct mvebu_mpp_ctrl *ctrl,
+			      unsigned long config)
+{
+	unsigned long gmpp = readl(DOVE_MPP_GENERAL_VIRT_BASE);
+
+	gmpp &= ~DOVE_NAND_GPIO_EN;
+	if (config)
+		gmpp |= DOVE_NAND_GPIO_EN;
+
+	writel(gmpp, DOVE_MPP_GENERAL_VIRT_BASE);
+
+	return 0;
+}
+
+static int dove_audio0_ctrl_get(struct mvebu_mpp_ctrl *ctrl,
+				unsigned long *config)
+{
+	unsigned long pmu = readl(DOVE_PMU_MPP_GENERAL_CTRL);
+
+	*config = ((pmu & DOVE_AU0_AC97_SEL) != 0);
+
+	return 0;
+}
+
+static int dove_audio0_ctrl_set(struct mvebu_mpp_ctrl *ctrl,
+				unsigned long config)
+{
+	unsigned long pmu = readl(DOVE_PMU_MPP_GENERAL_CTRL);
+
+	pmu &= ~DOVE_AU0_AC97_SEL;
+	if (config)
+		pmu |= DOVE_AU0_AC97_SEL;
+	writel(pmu, DOVE_PMU_MPP_GENERAL_CTRL);
+
+	return 0;
+}
+
+static int dove_audio1_ctrl_get(struct mvebu_mpp_ctrl *ctrl,
+				unsigned long *config)
+{
+	unsigned long mpp4 = readl(DOVE_MPP_CTRL4_VIRT_BASE);
+	unsigned long sspc1 = readl(DOVE_SSP_CTRL_STATUS_1);
+	unsigned long gmpp = readl(DOVE_MPP_GENERAL_VIRT_BASE);
+	unsigned long gcfg2 = readl(DOVE_GLOBAL_CONFIG_2);
+
+	*config = 0;
+	if (mpp4 & DOVE_AU1_GPIO_SEL)
+		*config |= BIT(3);
+	if (sspc1 & DOVE_SSP_ON_AU1)
+		*config |= BIT(2);
+	if (gmpp & DOVE_AU1_SPDIFO_GPIO_EN)
+		*config |= BIT(1);
+	if (gcfg2 & DOVE_TWSI_OPTION3_GPIO)
+		*config |= BIT(0);
+
+	/* SSP/TWSI only if I2S1 not set*/
+	if ((*config & BIT(3)) == 0)
+		*config &= ~(BIT(2) | BIT(0));
+	/* TWSI only if SPDIFO not set*/
+	if ((*config & BIT(1)) == 0)
+		*config &= ~BIT(0);
+	return 0;
+}
+
+static int dove_audio1_ctrl_set(struct mvebu_mpp_ctrl *ctrl,
+				unsigned long config)
+{
+	unsigned long mpp4 = readl(DOVE_MPP_CTRL4_VIRT_BASE);
+	unsigned long sspc1 = readl(DOVE_SSP_CTRL_STATUS_1);
+	unsigned long gmpp = readl(DOVE_MPP_GENERAL_VIRT_BASE);
+	unsigned long gcfg2 = readl(DOVE_GLOBAL_CONFIG_2);
+
+	if (config & BIT(0))
+		gcfg2 |= DOVE_TWSI_OPTION3_GPIO;
+	if (config & BIT(1))
+		gmpp |= DOVE_AU1_SPDIFO_GPIO_EN;
+	if (config & BIT(2))
+		sspc1 |= DOVE_SSP_ON_AU1;
+	if (config & BIT(3))
+		mpp4 |= DOVE_AU1_GPIO_SEL;
+
+	writel(mpp4, DOVE_MPP_CTRL4_VIRT_BASE);
+	writel(sspc1, DOVE_SSP_CTRL_STATUS_1);
+	writel(gmpp, DOVE_MPP_GENERAL_VIRT_BASE);
+	writel(gcfg2, DOVE_GLOBAL_CONFIG_2);
+
+	return 0;
+}
+
+/* mpp[52:57] gpio pins depend heavily on current config;
+ * gpio_req does not try to mux in gpio capabilities to not
+ * break other functions. If you require all mpps as gpio
+ * enforce gpio setting by pinctrl mapping.
+ */
+static int dove_audio1_ctrl_gpio_req(struct mvebu_mpp_ctrl *ctrl, u8 pid)
+{
+	unsigned long config;
+
+	dove_audio1_ctrl_get(ctrl, &config);
+
+	switch (config) {
+	case 0x02: /* i2s1 : gpio[56:57] */
+	case 0x0e: /* ssp  : gpio[56:57] */
+		if (pid >= 56)
+			return 0;
+		return -ENOTSUPP;
+	case 0x08: /* spdifo : gpio[52:55] */
+	case 0x0b: /* twsi   : gpio[52:55] */
+		if (pid <= 55)
+			return 0;
+		return -ENOTSUPP;
+	case 0x0a: /* all gpio */
+		return 0;
+	/* 0x00 : i2s1/spdifo : no gpio */
+	/* 0x0c : ssp/spdifo  : no gpio */
+	/* 0x0f : ssp/twsi    : no gpio */
+	}
+	return -ENOTSUPP;
+}
+
+/* mpp[52:57] has gpio pins capable of in and out */
+static int dove_audio1_ctrl_gpio_dir(struct mvebu_mpp_ctrl *ctrl, u8 pid,
+				bool input)
+{
+	if (pid < 52 || pid > 57)
+		return -ENOTSUPP;
+	return 0;
+}
+
+static int dove_twsi_ctrl_get(struct mvebu_mpp_ctrl *ctrl,
+			      unsigned long *config)
+{
+	unsigned long gcfg1 = readl(DOVE_GLOBAL_CONFIG_1);
+	unsigned long gcfg2 = readl(DOVE_GLOBAL_CONFIG_2);
+
+	*config = 0;
+	if (gcfg1 & DOVE_TWSI_ENABLE_OPTION1)
+		*config = 1;
+	else if (gcfg2 & DOVE_TWSI_ENABLE_OPTION2)
+		*config = 2;
+	else if (gcfg2 & DOVE_TWSI_ENABLE_OPTION3)
+		*config = 3;
+
+	return 0;
+}
+
+static int dove_twsi_ctrl_set(struct mvebu_mpp_ctrl *ctrl,
+				unsigned long config)
+{
+	unsigned long gcfg1 = readl(DOVE_GLOBAL_CONFIG_1);
+	unsigned long gcfg2 = readl(DOVE_GLOBAL_CONFIG_2);
+
+	gcfg1 &= ~DOVE_TWSI_ENABLE_OPTION1;
+	gcfg2 &= ~(DOVE_TWSI_ENABLE_OPTION2 | DOVE_TWSI_ENABLE_OPTION2);
+
+	switch (config) {
+	case 1:
+		gcfg1 |= DOVE_TWSI_ENABLE_OPTION1;
+		break;
+	case 2:
+		gcfg2 |= DOVE_TWSI_ENABLE_OPTION2;
+		break;
+	case 3:
+		gcfg2 |= DOVE_TWSI_ENABLE_OPTION3;
+		break;
+	}
+
+	writel(gcfg1, DOVE_GLOBAL_CONFIG_1);
+	writel(gcfg2, DOVE_GLOBAL_CONFIG_2);
+
+	return 0;
+}
+
+static struct mvebu_mpp_ctrl dove_mpp_controls[] = {
+	MPP_FUNC_CTRL(0, 0, "mpp0", dove_pmu_mpp_ctrl),
+	MPP_FUNC_CTRL(1, 1, "mpp1", dove_pmu_mpp_ctrl),
+	MPP_FUNC_CTRL(2, 2, "mpp2", dove_pmu_mpp_ctrl),
+	MPP_FUNC_CTRL(3, 3, "mpp3", dove_pmu_mpp_ctrl),
+	MPP_FUNC_CTRL(4, 4, "mpp4", dove_pmu_mpp_ctrl),
+	MPP_FUNC_CTRL(5, 5, "mpp5", dove_pmu_mpp_ctrl),
+	MPP_FUNC_CTRL(6, 6, "mpp6", dove_pmu_mpp_ctrl),
+	MPP_FUNC_CTRL(7, 7, "mpp7", dove_pmu_mpp_ctrl),
+	MPP_FUNC_CTRL(8, 8, "mpp8", dove_pmu_mpp_ctrl),
+	MPP_FUNC_CTRL(9, 9, "mpp9", dove_pmu_mpp_ctrl),
+	MPP_FUNC_CTRL(10, 10, "mpp10", dove_pmu_mpp_ctrl),
+	MPP_FUNC_CTRL(11, 11, "mpp11", dove_pmu_mpp_ctrl),
+	MPP_FUNC_CTRL(12, 12, "mpp12", dove_pmu_mpp_ctrl),
+	MPP_FUNC_CTRL(13, 13, "mpp13", dove_pmu_mpp_ctrl),
+	MPP_FUNC_CTRL(14, 14, "mpp14", dove_pmu_mpp_ctrl),
+	MPP_FUNC_CTRL(15, 15, "mpp15", dove_pmu_mpp_ctrl),
+	MPP_REG_CTRL(16, 23),
+	MPP_FUNC_CTRL(24, 39, "mpp_camera", dove_mpp4_ctrl),
+	MPP_FUNC_CTRL(40, 45, "mpp_sdio0", dove_mpp4_ctrl),
+	MPP_FUNC_CTRL(46, 51, "mpp_sdio1", dove_mpp4_ctrl),
+	MPP_FUNC_GPIO_CTRL(52, 57, "mpp_audio1", dove_audio1_ctrl),
+	MPP_FUNC_CTRL(58, 61, "mpp_spi0", dove_mpp4_ctrl),
+	MPP_FUNC_CTRL(62, 63, "mpp_uart1", dove_mpp4_ctrl),
+	MPP_FUNC_CTRL(64, 71, "mpp_nand", dove_nand_ctrl),
+	MPP_FUNC_CTRL(72, 72, "audio0", dove_audio0_ctrl),
+	MPP_FUNC_CTRL(73, 73, "twsi", dove_twsi_ctrl),
+};
+
+static struct mvebu_mpp_mode dove_mpp_modes[] = {
+	MPP_MODE(0,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x02, "uart2", "rts"),
+		MPP_FUNCTION(0x03, "sdio0", "cd"),
+		MPP_FUNCTION(0x0f, "lcd0", "pwm"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(1,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x02, "uart2", "cts"),
+		MPP_FUNCTION(0x03, "sdio0", "wp"),
+		MPP_FUNCTION(0x0f, "lcd1", "pwm"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(2,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x01, "sata", "prsnt"),
+		MPP_FUNCTION(0x02, "uart2", "txd"),
+		MPP_FUNCTION(0x03, "sdio0", "buspwr"),
+		MPP_FUNCTION(0x04, "uart1", "rts"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(3,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x01, "sata", "act"),
+		MPP_FUNCTION(0x02, "uart2", "rxd"),
+		MPP_FUNCTION(0x03, "sdio0", "ledctrl"),
+		MPP_FUNCTION(0x04, "uart1", "cts"),
+		MPP_FUNCTION(0x0f, "lcd-spi", "cs1"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(4,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x02, "uart3", "rts"),
+		MPP_FUNCTION(0x03, "sdio1", "cd"),
+		MPP_FUNCTION(0x04, "spi1", "miso"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(5,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x02, "uart3", "cts"),
+		MPP_FUNCTION(0x03, "sdio1", "wp"),
+		MPP_FUNCTION(0x04, "spi1", "cs"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(6,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x02, "uart3", "txd"),
+		MPP_FUNCTION(0x03, "sdio1", "buspwr"),
+		MPP_FUNCTION(0x04, "spi1", "mosi"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(7,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x02, "uart3", "rxd"),
+		MPP_FUNCTION(0x03, "sdio1", "ledctrl"),
+		MPP_FUNCTION(0x04, "spi1", "sck"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(8,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x01, "watchdog", "rstout"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(9,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x05, "pex1", "clkreq"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(10,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x05, "ssp", "sclk"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(11,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x01, "sata", "prsnt"),
+		MPP_FUNCTION(0x02, "sata-1", "act"),
+		MPP_FUNCTION(0x03, "sdio0", "ledctrl"),
+		MPP_FUNCTION(0x04, "sdio1", "ledctrl"),
+		MPP_FUNCTION(0x05, "pex0", "clkreq"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(12,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x01, "sata", "act"),
+		MPP_FUNCTION(0x02, "uart2", "rts"),
+		MPP_FUNCTION(0x03, "audio0", "extclk"),
+		MPP_FUNCTION(0x04, "sdio1", "cd"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(13,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x02, "uart2", "cts"),
+		MPP_FUNCTION(0x03, "audio1", "extclk"),
+		MPP_FUNCTION(0x04, "sdio1", "wp"),
+		MPP_FUNCTION(0x05, "ssp", "extclk"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(14,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x02, "uart2", "txd"),
+		MPP_FUNCTION(0x04, "sdio1", "buspwr"),
+		MPP_FUNCTION(0x05, "ssp", "rxd"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(15,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x02, "uart2", "rxd"),
+		MPP_FUNCTION(0x04, "sdio1", "ledctrl"),
+		MPP_FUNCTION(0x05, "ssp", "sfrm"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(16,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x02, "uart3", "rts"),
+		MPP_FUNCTION(0x03, "sdio0", "cd"),
+		MPP_FUNCTION(0x04, "lcd-spi", "cs1"),
+		MPP_FUNCTION(0x05, "ac97", "sdi1")),
+	MPP_MODE(17,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x01, "ac97-1", "sysclko"),
+		MPP_FUNCTION(0x02, "uart3", "cts"),
+		MPP_FUNCTION(0x03, "sdio0", "wp"),
+		MPP_FUNCTION(0x04, "twsi", "sda"),
+		MPP_FUNCTION(0x05, "ac97", "sdi2")),
+	MPP_MODE(18,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x02, "uart3", "txd"),
+		MPP_FUNCTION(0x03, "sdio0", "buspwr"),
+		MPP_FUNCTION(0x04, "lcd0", "pwm"),
+		MPP_FUNCTION(0x05, "ac97", "sdi3")),
+	MPP_MODE(19,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x02, "uart3", "rxd"),
+		MPP_FUNCTION(0x03, "sdio0", "ledctrl"),
+		MPP_FUNCTION(0x04, "twsi", "sck")),
+	MPP_MODE(20,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x01, "ac97", "sysclko"),
+		MPP_FUNCTION(0x02, "lcd-spi", "miso"),
+		MPP_FUNCTION(0x03, "sdio1", "cd"),
+		MPP_FUNCTION(0x05, "sdio0", "cd"),
+		MPP_FUNCTION(0x06, "spi1", "miso")),
+	MPP_MODE(21,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x01, "uart1", "rts"),
+		MPP_FUNCTION(0x02, "lcd-spi", "cs0"),
+		MPP_FUNCTION(0x03, "sdio1", "wp"),
+		MPP_FUNCTION(0x04, "ssp", "sfrm"),
+		MPP_FUNCTION(0x05, "sdio0", "wp"),
+		MPP_FUNCTION(0x06, "spi1", "cs")),
+	MPP_MODE(22,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x01, "uart1", "cts"),
+		MPP_FUNCTION(0x02, "lcd-spi", "mosi"),
+		MPP_FUNCTION(0x03, "sdio1", "buspwr"),
+		MPP_FUNCTION(0x04, "ssp", "txd"),
+		MPP_FUNCTION(0x05, "sdio0", "buspwr"),
+		MPP_FUNCTION(0x06, "spi1", "mosi")),
+	MPP_MODE(23,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x02, "lcd-spi", "sck"),
+		MPP_FUNCTION(0x03, "sdio1", "ledctrl"),
+		MPP_FUNCTION(0x04, "ssp", "sclk"),
+		MPP_FUNCTION(0x05, "sdio0", "ledctrl"),
+		MPP_FUNCTION(0x06, "spi1", "sck")),
+	MPP_MODE(24,
+		MPP_FUNCTION(0x00, "camera", NULL),
+		MPP_FUNCTION(0x01, "gpio", NULL)),
+	MPP_MODE(40,
+		MPP_FUNCTION(0x00, "sdio0", NULL),
+		MPP_FUNCTION(0x01, "gpio", NULL)),
+	MPP_MODE(46,
+		MPP_FUNCTION(0x00, "sdio1", NULL),
+		MPP_FUNCTION(0x01, "gpio", NULL)),
+	MPP_MODE(52,
+		MPP_FUNCTION(0x00, "i2s1/spdifo", NULL),
+		MPP_FUNCTION(0x02, "i2s1", NULL),
+		MPP_FUNCTION(0x08, "spdifo", NULL),
+		MPP_FUNCTION(0x0a, "gpio", NULL),
+		MPP_FUNCTION(0x0b, "twsi", NULL),
+		MPP_FUNCTION(0x0c, "ssp/spdifo", NULL),
+		MPP_FUNCTION(0x0e, "ssp", NULL),
+		MPP_FUNCTION(0x0f, "ssp/twsi", NULL)),
+	MPP_MODE(58,
+		MPP_FUNCTION(0x00, "spi0", NULL),
+		MPP_FUNCTION(0x01, "gpio", NULL)),
+	MPP_MODE(62,
+		MPP_FUNCTION(0x00, "uart1", NULL),
+		MPP_FUNCTION(0x01, "gpio", NULL)),
+	MPP_MODE(64,
+		MPP_FUNCTION(0x00, "nand", NULL),
+		MPP_FUNCTION(0x01, "gpo", NULL)),
+	MPP_MODE(72,
+		MPP_FUNCTION(0x00, "i2s", NULL),
+		MPP_FUNCTION(0x01, "ac97", NULL)),
+	MPP_MODE(73,
+		MPP_FUNCTION(0x00, "none", NULL),
+		MPP_FUNCTION(0x01, "opt1", NULL),
+		MPP_FUNCTION(0x02, "opt2", NULL),
+		MPP_FUNCTION(0x03, "opt3", NULL)),
+};
+
+static struct pinctrl_gpio_range dove_mpp_gpio_ranges[] = {
+	MPP_GPIO_RANGE(0,  0,  0, 32),
+	MPP_GPIO_RANGE(1, 32, 32, 32),
+	MPP_GPIO_RANGE(2, 64, 64,  8),
+};
+
+static struct mvebu_pinctrl_soc_info dove_pinctrl_info = {
+	.controls = dove_mpp_controls,
+	.ncontrols = ARRAY_SIZE(dove_mpp_controls),
+	.modes = dove_mpp_modes,
+	.nmodes = ARRAY_SIZE(dove_mpp_modes),
+	.gpioranges = dove_mpp_gpio_ranges,
+	.ngpioranges = ARRAY_SIZE(dove_mpp_gpio_ranges),
+	.variant = 0,
+};
+
+static struct clk *clk;
+
+static struct of_device_id dove_pinctrl_of_match[] __devinitdata = {
+	{ .compatible = "marvell,dove-pinctrl", .data = &dove_pinctrl_info },
+	{ }
+};
+
+static int __devinit dove_pinctrl_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *match =
+		of_match_device(dove_pinctrl_of_match, &pdev->dev);
+
+	if (match)
+		pdev->dev.platform_data = match->data;
+
+	/*
+	 * General MPP Configuration Register is part of pdma registers.
+	 * grab clk to make sure it is ticking.
+	 */
+	clk = devm_clk_get(&pdev->dev, NULL);
+	if (!IS_ERR(clk))
+		clk_prepare_enable(clk);
+
+	return mvebu_pinctrl_probe(pdev);
+}
+
+static int __devexit dove_pinctrl_remove(struct platform_device *pdev)
+{
+	int ret;
+
+	ret = mvebu_pinctrl_remove(pdev);
+	if (!IS_ERR(clk))
+		clk_disable_unprepare(clk);
+	return ret;
+}
+
+static struct platform_driver dove_pinctrl_driver = {
+	.driver = {
+		.name = "dove-pinctrl",
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(dove_pinctrl_of_match),
+	},
+	.probe = dove_pinctrl_probe,
+	.remove = __devexit_p(dove_pinctrl_remove),
+};
+
+module_platform_driver(dove_pinctrl_driver);
+
+MODULE_AUTHOR("Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>");
+MODULE_DESCRIPTION("Marvell Dove pinctrl driver");
+MODULE_LICENSE("GPL v2");
-- 
1.7.10.4

[PATCH v2 1/9] pinctrl: mvebu: pinctrl driver core

From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: 2012-08-22 08:25:41

This patch adds a pinctrl driver core for Marvell SoCs plus DT
binding documentation. This core driver will be used by SoC family
specific drivers, i.e. Armada XP, Armada 370, Dove, Kirkwood, aso.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Thomas Petazzoni <redacted>
---
v2:
- restructured Kconfig to have a common PINCTRL_MVEBU that are selected by
  SoC specific drivers.
- cleaned pinctrl-mvebu and replaced 'magic numbers' by defines
- make use of of_iomap instead of get_resource/ioremap
- extended include documentation and checked with scripts/kernel-doc
- cleaned devicetree binding documentation

Cc: Thomas Petazzoni <redacted>
Cc: Grant Likely <redacted>
Cc: Rob Herring <redacted>
Cc: Rob Landley <redacted>
Cc: Russell King <redacted>
Cc: Lior Amsalem <redacted>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory CLEMENT <redacted>
Cc: Ben Dooks <redacted>
Cc: Linus Walleij <redacted>
Cc: Stephen Warren <redacted>
Cc: devicetree-discuss at lists.ozlabs.org
Cc: linux-doc at vger.kernel.org
Cc: linux-kernel at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
---
 .../bindings/pinctrl/marvell,mvebu-pinctrl.txt     |   45 ++
 arch/arm/Kconfig                                   |    1 +
 drivers/pinctrl/Kconfig                            |    6 +
 drivers/pinctrl/Makefile                           |    1 +
 drivers/pinctrl/pinctrl-mvebu.c                    |  761 ++++++++++++++++++++
 drivers/pinctrl/pinctrl-mvebu.h                    |  192 +++++
 6 files changed, 1006 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt
 create mode 100644 drivers/pinctrl/pinctrl-mvebu.c
 create mode 100644 drivers/pinctrl/pinctrl-mvebu.h
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt
new file mode 100644
index 0000000..dc419e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt
@@ -0,0 +1,45 @@
+* Marvell SoC pinctrl core driver for mpp
+
+The pinctrl driver enables Marvell SoCs to configure the multi-purpose pins
+(mpp) to a specific function. For each SoC family there is a SoC specific
+driver using this core driver.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+A Marvell SoC pin configuration node is a node of a group of pins which can
+be used for a specific device or function. Each node requires one or more
+mpp pins or group of pins and a mpp function common to all pins.
+
+Required properties for pinctrl driver:
+- compatible: "marvell,<soc>-pinctrl"
+  Please refer to each marvell,<soc>-pinctrl.txt binding doc for supported SoCs.
+
+Required properties for pin configuration node:
+- marvell,pins: string array of mpp pins or group of pins to be muxed.
+- marvell,function: string representing a function to mux to for all
+    marvell,pins given in this pin configuration node. The function has to be
+    common for all marvell,pins. Please refer to marvell,<soc>-pinctrl.txt for
+    valid pin/pin group names and available function names for each SoC.
+
+Examples:
+
+uart1: serial at 12100 {
+	compatible = "ns16550a";
+	reg = <0x12100 0x100>;
+	reg-shift = <2>;
+	interrupts = <7>;
+
+	pinctrl-0 = <&pmx_uart1_sw>;
+};
+
+pinctrl: pinctrl at d0200 {
+	compatible = "marvell,dove-pinctrl";
+	reg = <0xd0200 0x20>;
+
+	pmx_uart1_sw: pmx-uart1-sw {
+		marvell,pins = "mpp_uart1";
+		marvell,function = "uart1";
+	};
+};
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a2b6f74..2eb3f6b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -574,6 +574,7 @@ config ARCH_MVEBU
 	select IRQ_DOMAIN
 	select COMMON_CLK
 	select PLAT_ORION
+	select PINCTRL
 	help
 	  Support for the Marvell SoC Family with device tree support
 
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 54e3588..20bfdc3 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -145,6 +145,12 @@ config PINCTRL_COH901
 	  COH 901 335 and COH 901 571/3. They contain 3, 5 or 7
 	  ports of 8 GPIO pins each.
 
+config PINCTRL_MVEBU
+	bool
+	depends on ARCH_MVEBU
+	select PINMUX
+	select PINCONF
+
 source "drivers/pinctrl/spear/Kconfig"
 
 endmenu
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index f40b1f8..007ed32 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -29,5 +29,6 @@ obj-$(CONFIG_PINCTRL_TEGRA20)	+= pinctrl-tegra20.o
 obj-$(CONFIG_PINCTRL_TEGRA30)	+= pinctrl-tegra30.o
 obj-$(CONFIG_PINCTRL_U300)	+= pinctrl-u300.o
 obj-$(CONFIG_PINCTRL_COH901)	+= pinctrl-coh901.o
+obj-$(CONFIG_PINCTRL_MVEBU)	+= pinctrl-mvebu.o
 
 obj-$(CONFIG_PLAT_SPEAR)	+= spear/
diff --git a/drivers/pinctrl/pinctrl-mvebu.c b/drivers/pinctrl/pinctrl-mvebu.c
new file mode 100644
index 0000000..5397765
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-mvebu.c
@@ -0,0 +1,761 @@
+/*
+ * Marvell MVEBU pinctrl core driver
+ *
+ * Authors: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *          Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+
+#include "core.h"
+#include "pinctrl-mvebu.h"
+
+#define MPPS_PER_REG	8
+#define MPP_BITS	4
+#define MPP_MASK	0xf
+
+struct mvebu_pinctrl_function {
+	unsigned fid;
+	const char *name;
+	const char *setting;
+	const char **groups;
+	unsigned num_groups;
+};
+
+struct mvebu_pinctrl_group {
+	const char *name;
+	struct mvebu_mpp_ctrl *ctrl;
+	struct mvebu_mpp_ctrl_setting *settings;
+	unsigned num_settings;
+	unsigned gid;
+	unsigned *pins;
+	unsigned npins;
+};
+
+struct mvebu_pinctrl {
+	struct device *dev;
+	struct pinctrl_dev *pctldev;
+	struct pinctrl_desc desc;
+	void __iomem *base;
+	struct mvebu_pinctrl_group *groups;
+	unsigned num_groups;
+	struct mvebu_pinctrl_function *functions;
+	unsigned num_functions;
+	u8 variant;
+};
+
+struct mvebu_pinctrl_group *mvebu_pinctrl_find_group_by_pid(
+	struct mvebu_pinctrl *pctl, unsigned pid)
+{
+	unsigned n;
+	for (n = 0; n < pctl->num_groups; n++) {
+		if (pid >= pctl->groups[n].pins[0] &&
+		    pid < pctl->groups[n].pins[0] +
+			pctl->groups[n].npins)
+			return &pctl->groups[n];
+	}
+	return NULL;
+}
+
+struct mvebu_pinctrl_group *mvebu_pinctrl_find_group_by_name(
+	struct mvebu_pinctrl *pctl, const char *name)
+{
+	unsigned n;
+	for (n = 0; n < pctl->num_groups; n++) {
+		if (strcmp(name, pctl->groups[n].name) == 0)
+			return &pctl->groups[n];
+	}
+	return NULL;
+}
+
+struct mvebu_mpp_ctrl_setting *mvebu_pinctrl_find_setting_by_val(
+	struct mvebu_pinctrl *pctl, struct mvebu_pinctrl_group *grp,
+	unsigned long config)
+{
+	unsigned n;
+	for (n = 0; n < grp->num_settings; n++) {
+		if (config == grp->settings[n].val) {
+			if (!pctl->variant || (pctl->variant &
+					       grp->settings[n].variant))
+				return &grp->settings[n];
+		}
+	}
+	return NULL;
+}
+
+struct mvebu_mpp_ctrl_setting *mvebu_pinctrl_find_setting_by_name(
+	struct mvebu_pinctrl *pctl, struct mvebu_pinctrl_group *grp,
+	const char *name)
+{
+	unsigned n;
+	for (n = 0; n < grp->num_settings; n++) {
+		if (strcmp(name, grp->settings[n].name) == 0) {
+			if (!pctl->variant || (pctl->variant &
+					       grp->settings[n].variant))
+				return &grp->settings[n];
+		}
+	}
+	return NULL;
+}
+
+struct mvebu_mpp_ctrl_setting *mvebu_pinctrl_find_gpio_setting(
+	struct mvebu_pinctrl *pctl, struct mvebu_pinctrl_group *grp)
+{
+	unsigned n;
+	for (n = 0; n < grp->num_settings; n++) {
+		if (grp->settings[n].flags &
+			(MVEBU_SETTING_GPO | MVEBU_SETTING_GPI)) {
+			if (!pctl->variant || (pctl->variant &
+						grp->settings[n].variant))
+				return &grp->settings[n];
+		}
+	}
+	return NULL;
+}
+
+struct mvebu_pinctrl_function *mvebu_pinctrl_find_function_by_name(
+	struct mvebu_pinctrl *pctl, const char *name)
+{
+	unsigned n;
+	for (n = 0; n < pctl->num_functions; n++) {
+		if (strcmp(name, pctl->functions[n].name) == 0)
+			return &pctl->functions[n];
+	}
+	return NULL;
+}
+
+/*
+ * Common mpp pin configuration registers on MVEBU are
+ * registers of eight 4-bit values for each mpp setting.
+ * Register offset and bit mask are calculated accordingly below.
+ */
+static int mvebu_common_mpp_get(struct mvebu_pinctrl *pctl,
+				struct mvebu_pinctrl_group *grp,
+				unsigned long *config)
+{
+	unsigned pin = grp->gid;
+	unsigned off = (pin / MPPS_PER_REG) * MPP_BITS;
+	unsigned shift = (pin % MPPS_PER_REG) * MPP_BITS;
+
+	*config = readl(pctl->base + off);
+	*config >>= shift;
+	*config &= MPP_MASK;
+
+	return 0;
+}
+
+static int mvebu_common_mpp_set(struct mvebu_pinctrl *pctl,
+				struct mvebu_pinctrl_group *grp,
+				unsigned long config)
+{
+	unsigned pin = grp->gid;
+	unsigned off = (pin / MPPS_PER_REG) * MPP_BITS;
+	unsigned shift = (pin % MPPS_PER_REG) * MPP_BITS;
+	unsigned long reg;
+
+	reg = readl(pctl->base + off);
+	reg &= ~(MPP_MASK << shift);
+	reg |= (config << shift);
+	writel(reg, pctl->base + off);
+
+	return 0;
+}
+
+static int mvebu_pinconf_group_get(struct pinctrl_dev *pctldev,
+				unsigned gid, unsigned long *config)
+{
+	struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	struct mvebu_pinctrl_group *grp = &pctl->groups[gid];
+
+	if (!grp->ctrl)
+		return -EINVAL;
+
+	if (grp->ctrl->mpp_get)
+		return grp->ctrl->mpp_get(grp->ctrl, config);
+
+	return mvebu_common_mpp_get(pctl, grp, config);
+}
+
+static int mvebu_pinconf_group_set(struct pinctrl_dev *pctldev,
+				unsigned gid, unsigned long config)
+{
+	struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	struct mvebu_pinctrl_group *grp = &pctl->groups[gid];
+
+	if (!grp->ctrl)
+		return -EINVAL;
+
+	if (grp->ctrl->mpp_set)
+		return grp->ctrl->mpp_set(grp->ctrl, config);
+
+	return mvebu_common_mpp_set(pctl, grp, config);
+}
+
+static void mvebu_pinconf_group_dbg_show(struct pinctrl_dev *pctldev,
+					struct seq_file *s, unsigned gid)
+{
+	struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	struct mvebu_pinctrl_group *grp = &pctl->groups[gid];
+	struct mvebu_mpp_ctrl_setting *curr;
+	unsigned long config;
+	unsigned n;
+
+	if (mvebu_pinconf_group_get(pctldev, gid, &config))
+		return;
+
+	curr = mvebu_pinctrl_find_setting_by_val(pctl, grp, config);
+
+	if (curr) {
+		seq_printf(s, "current: %s", curr->name);
+		if (curr->subname)
+			seq_printf(s, "(%s)", curr->subname);
+		if (curr->flags & (MVEBU_SETTING_GPO | MVEBU_SETTING_GPI)) {
+			seq_printf(s, "(");
+			if (curr->flags & MVEBU_SETTING_GPI)
+				seq_printf(s, "i");
+			if (curr->flags & MVEBU_SETTING_GPO)
+				seq_printf(s, "o");
+			seq_printf(s, ")");
+		}
+	} else
+		seq_printf(s, "current: UNKNOWN");
+
+	if (grp->num_settings > 1) {
+		seq_printf(s, ", available = [");
+		for (n = 0; n < grp->num_settings; n++) {
+			if (curr == &grp->settings[n])
+				continue;
+
+			/* skip unsupported settings for this variant */
+			if (pctl->variant &&
+			    !(pctl->variant & grp->settings[n].variant))
+				continue;
+
+			seq_printf(s, " %s", grp->settings[n].name);
+			if (grp->settings[n].subname)
+				seq_printf(s, "(%s)", grp->settings[n].subname);
+			if (grp->settings[n].flags &
+				(MVEBU_SETTING_GPO | MVEBU_SETTING_GPI)) {
+				seq_printf(s, "(");
+				if (grp->settings[n].flags & MVEBU_SETTING_GPI)
+					seq_printf(s, "i");
+				if (grp->settings[n].flags & MVEBU_SETTING_GPO)
+					seq_printf(s, "o");
+				seq_printf(s, ")");
+			}
+		}
+		seq_printf(s, " ]");
+	}
+	return;
+}
+
+struct pinconf_ops mvebu_pinconf_ops = {
+	.pin_config_group_get = mvebu_pinconf_group_get,
+	.pin_config_group_set = mvebu_pinconf_group_set,
+	.pin_config_group_dbg_show = mvebu_pinconf_group_dbg_show,
+};
+
+static int mvebu_pinmux_get_funcs_count(struct pinctrl_dev *pctldev)
+{
+	struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+
+	return pctl->num_functions;
+}
+
+static const char *mvebu_pinmux_get_func_name(struct pinctrl_dev *pctldev,
+					unsigned fid)
+{
+	struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+
+	return pctl->functions[fid].name;
+}
+
+static int mvebu_pinmux_get_groups(struct pinctrl_dev *pctldev, unsigned fid,
+				const char * const **groups,
+				unsigned * const num_groups)
+{
+	struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+
+	*groups = pctl->functions[fid].groups;
+	*num_groups = pctl->functions[fid].num_groups;
+	return 0;
+}
+
+static int mvebu_pinmux_enable(struct pinctrl_dev *pctldev, unsigned fid,
+			unsigned gid)
+{
+	struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	struct mvebu_pinctrl_function *func = &pctl->functions[fid];
+	struct mvebu_pinctrl_group *grp = &pctl->groups[gid];
+	struct mvebu_mpp_ctrl_setting *setting;
+	int ret;
+
+	setting = mvebu_pinctrl_find_setting_by_name(pctl, grp,
+						     func->setting);
+	if (!setting) {
+		dev_err(pctl->dev,
+			"unable to find setting %s in group %s\n",
+			func->setting, func->groups[gid]);
+		return -EINVAL;
+	}
+
+	ret = mvebu_pinconf_group_set(pctldev, grp->gid, setting->val);
+	if (ret) {
+		dev_err(pctl->dev, "cannot set group %s to %s\n",
+			func->groups[gid], func->setting);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int mvebu_pinmux_gpio_request_enable(struct pinctrl_dev *pctldev,
+			struct pinctrl_gpio_range *range, unsigned offset)
+{
+	struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	struct mvebu_pinctrl_group *grp;
+	struct mvebu_mpp_ctrl_setting *setting;
+
+	grp = mvebu_pinctrl_find_group_by_pid(pctl, offset);
+	if (!grp)
+		return -EINVAL;
+
+	if (grp->ctrl->mpp_gpio_req)
+		return grp->ctrl->mpp_gpio_req(grp->ctrl, offset);
+
+	setting = mvebu_pinctrl_find_gpio_setting(pctl, grp);
+	if (!setting)
+		return -ENOTSUPP;
+
+	return mvebu_pinconf_group_set(pctldev, grp->gid, setting->val);
+}
+
+static int mvebu_pinmux_gpio_set_direction(struct pinctrl_dev *pctldev,
+	   struct pinctrl_gpio_range *range, unsigned offset, bool input)
+{
+	struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	struct mvebu_pinctrl_group *grp;
+	struct mvebu_mpp_ctrl_setting *setting;
+
+	grp = mvebu_pinctrl_find_group_by_pid(pctl, offset);
+	if (!grp)
+		return -EINVAL;
+
+	if (grp->ctrl->mpp_gpio_dir)
+		return grp->ctrl->mpp_gpio_dir(grp->ctrl, offset, input);
+
+	setting = mvebu_pinctrl_find_gpio_setting(pctl, grp);
+	if (!setting)
+		return -ENOTSUPP;
+
+	if ((input && (setting->flags & MVEBU_SETTING_GPI)) ||
+	    (!input && (setting->flags & MVEBU_SETTING_GPO)))
+		return 0;
+
+	return -ENOTSUPP;
+}
+
+static struct pinmux_ops mvebu_pinmux_ops = {
+	.get_functions_count = mvebu_pinmux_get_funcs_count,
+	.get_function_name = mvebu_pinmux_get_func_name,
+	.get_function_groups = mvebu_pinmux_get_groups,
+	.gpio_request_enable = mvebu_pinmux_gpio_request_enable,
+	.gpio_set_direction = mvebu_pinmux_gpio_set_direction,
+	.enable = mvebu_pinmux_enable,
+};
+
+static int mvebu_pinctrl_get_groups_count(struct pinctrl_dev *pctldev)
+{
+	struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	return pctl->num_groups;
+}
+
+static const char *mvebu_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
+						unsigned gid)
+{
+	struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	return pctl->groups[gid].name;
+}
+
+static int mvebu_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
+					unsigned gid, const unsigned **pins,
+					unsigned *num_pins)
+{
+	struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	*pins = pctl->groups[gid].pins;
+	*num_pins = pctl->groups[gid].npins;
+	return 0;
+}
+
+static int mvebu_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
+					struct device_node *np,
+					struct pinctrl_map **map,
+					unsigned *num_maps)
+{
+	struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	struct property *prop;
+	const char *function;
+	const char *group;
+	int ret, nmaps, n;
+
+	*map = NULL;
+	*num_maps = 0;
+
+	ret = of_property_read_string(np, "marvell,function", &function);
+	if (ret) {
+		dev_err(pctl->dev,
+			"missing marvell,function in node %s\n", np->name);
+		return 0;
+	}
+
+	nmaps = of_property_count_strings(np, "marvell,pins");
+	if (nmaps < 0) {
+		dev_err(pctl->dev,
+			"missing marvell,pins in node %s\n", np->name);
+		return 0;
+	}
+
+	*map = kmalloc(nmaps * sizeof(struct pinctrl_map), GFP_KERNEL);
+	if (map == NULL) {
+		dev_err(pctl->dev,
+			"cannot allocate pinctrl_map memory for %s\n",
+			np->name);
+		return -ENOMEM;
+	}
+
+	n = 0;
+	of_property_for_each_string(np, "marvell,pins", prop, group) {
+		struct mvebu_pinctrl_group *grp =
+			mvebu_pinctrl_find_group_by_name(pctl, group);
+
+		if (!grp) {
+			dev_err(pctl->dev, "unknown pin %s", group);
+			continue;
+		}
+
+		if (!mvebu_pinctrl_find_setting_by_name(pctl, grp, function)) {
+			dev_err(pctl->dev, "unsupported function %s on pin %s",
+				function, group);
+			continue;
+		}
+
+		(*map)[n].type = PIN_MAP_TYPE_MUX_GROUP;
+		(*map)[n].data.mux.group = group;
+		(*map)[n].data.mux.function = np->name;
+		n++;
+	}
+
+	*num_maps = nmaps;
+
+	return 0;
+}
+
+static void mvebu_pinctrl_dt_free_map(struct pinctrl_dev *pctldev,
+				struct pinctrl_map *map, unsigned num_maps)
+{
+	kfree(map);
+}
+
+static struct pinctrl_ops mvebu_pinctrl_ops = {
+	.get_groups_count = mvebu_pinctrl_get_groups_count,
+	.get_group_name = mvebu_pinctrl_get_group_name,
+	.get_group_pins = mvebu_pinctrl_get_group_pins,
+	.dt_node_to_map = mvebu_pinctrl_dt_node_to_map,
+	.dt_free_map = mvebu_pinctrl_dt_free_map,
+};
+
+static int __devinit mvebu_pinctrl_dt_parse_function(struct mvebu_pinctrl *pctl,
+					struct device_node *np, unsigned idx)
+{
+	struct mvebu_pinctrl_function *func = &pctl->functions[idx];
+	struct property *prop;
+	const char *setting;
+	const char *group;
+	unsigned n = 0;
+	int ret, num_groups;
+
+	ret = of_property_read_string(np, "marvell,function", &setting);
+	if (ret) {
+		dev_err(pctl->dev,
+			"missing marvell,function in node %s\n", np->name);
+		return -EINVAL;
+	}
+
+	num_groups = of_property_count_strings(np, "marvell,pins");
+	if (num_groups <= 0) {
+		dev_err(pctl->dev,
+			"missing marvell,pins in node %s\n", np->name);
+		return -EINVAL;
+	}
+
+	func->fid = idx;
+	func->name = np->name;
+	func->setting = setting;
+	func->num_groups = num_groups;
+	func->groups = devm_kzalloc(pctl->dev, num_groups * sizeof(char *),
+				    GFP_KERNEL);
+	if (!func->groups) {
+		dev_err(pctl->dev,
+			"unable to alloc function groups\n");
+		return -ENOMEM;
+	}
+
+	of_property_for_each_string(np, "marvell,pins", prop, group) {
+		struct mvebu_pinctrl_group *grp =
+			mvebu_pinctrl_find_group_by_name(pctl, group);
+
+		if (!grp) {
+			dev_err(pctl->dev, "unknown pin %s", group);
+			return -EINVAL;
+		}
+
+		if (!mvebu_pinctrl_find_setting_by_name(pctl, grp, setting)) {
+			dev_err(pctl->dev, "unsupported function %s on pin %s",
+				setting, group);
+			return -EINVAL;
+		}
+
+		func->groups[n++] = group;
+	}
+	return 0;
+}
+
+static int __devinit mvebu_pinctrl_dt_parse(struct platform_device *pdev,
+					struct mvebu_pinctrl *pctl)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct device_node *np;
+	unsigned nfuncs = 0, n = 0;
+	int ret;
+
+	if (!node)
+		return -ENODEV;
+
+	nfuncs = of_get_child_count(node);
+	if (nfuncs <= 0) {
+		dev_warn(pctl->dev, "no function defined in device node\n");
+		return 0;
+	}
+
+	pctl->num_functions = nfuncs;
+	pctl->functions = devm_kzalloc(&pdev->dev, nfuncs *
+				sizeof(struct mvebu_pinctrl_function),
+				GFP_KERNEL);
+	if (!pctl->functions) {
+		dev_err(pctl->dev, "unable to alloc functions\n");
+		return -ENOMEM;
+	}
+
+	for_each_child_of_node(node, np) {
+		ret = mvebu_pinctrl_dt_parse_function(pctl, np, n++);
+		if (ret) {
+			dev_warn(pctl->dev, "failed to parse function %s\n",
+				np->name);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+int __devinit mvebu_pinctrl_probe(struct platform_device *pdev)
+{
+	struct mvebu_pinctrl_soc_info *soc = dev_get_platdata(&pdev->dev);
+	struct device_node *np = pdev->dev.of_node;
+	struct mvebu_pinctrl *pctl;
+	void __iomem *base;
+	struct pinctrl_pin_desc *pdesc;
+	unsigned gid, n, k;
+	int ret;
+
+	if (!soc || !soc->controls || !soc->modes) {
+		dev_err(&pdev->dev, "wrong pinctrl soc info\n");
+		return -EINVAL;
+	}
+
+	base = of_iomap(np, 0);
+	if (!base) {
+		dev_err(&pdev->dev, "unable to get base address\n");
+		return -ENODEV;
+	}
+
+	pctl = devm_kzalloc(&pdev->dev, sizeof(struct mvebu_pinctrl),
+			GFP_KERNEL);
+	if (!pctl) {
+		dev_err(&pdev->dev, "unable to alloc driver\n");
+		return -ENOMEM;
+	}
+
+	pctl->desc.name = dev_name(&pdev->dev);
+	pctl->desc.owner = THIS_MODULE;
+	pctl->desc.pctlops = &mvebu_pinctrl_ops;
+	pctl->desc.pmxops = &mvebu_pinmux_ops;
+	pctl->desc.confops = &mvebu_pinconf_ops;
+	pctl->variant = soc->variant;
+	pctl->base = base;
+	pctl->dev = &pdev->dev;
+	platform_set_drvdata(pdev, pctl);
+
+	/* count controls and create names for mvebu generic
+	   register controls; also does sanity checks */
+	pctl->num_groups = 0;
+	pctl->desc.npins = 0;
+	for (n = 0; n < soc->ncontrols; n++) {
+		struct mvebu_mpp_ctrl *ctrl = &soc->controls[n];
+		char *names;
+
+		pctl->desc.npins += ctrl->npins;
+		/* initial control pins */
+		for (k = 0; k < ctrl->npins; k++)
+			ctrl->pins[k] = ctrl->pid + k;
+
+		/* special soc specific control */
+		if (ctrl->mpp_get || ctrl->mpp_set) {
+			if (!ctrl->name || !ctrl->mpp_set || !ctrl->mpp_set) {
+				dev_err(&pdev->dev, "wrong soc control info\n");
+				return -EINVAL;
+			}
+			pctl->num_groups += 1;
+			continue;
+		}
+
+		/* generic mvebu register control */
+		names = devm_kzalloc(&pdev->dev, ctrl->npins * 8, GFP_KERNEL);
+		if (!names) {
+			dev_err(&pdev->dev, "failed to alloc mpp names\n");
+			return -ENOMEM;
+		}
+		for (k = 0; k < ctrl->npins; k++)
+			sprintf(names + 8*k, "mpp%d", ctrl->pid+k);
+		ctrl->name = names;
+		pctl->num_groups += ctrl->npins;
+	}
+
+	pdesc = devm_kzalloc(&pdev->dev, pctl->desc.npins *
+			     sizeof(struct pinctrl_pin_desc), GFP_KERNEL);
+	if (!pdesc) {
+		dev_err(&pdev->dev, "failed to alloc pinctrl pins\n");
+		return -ENOMEM;
+	}
+
+	for (n = 0; n < pctl->desc.npins; n++)
+		pdesc[n].number = n;
+	pctl->desc.pins = pdesc;
+
+	pctl->groups = devm_kzalloc(&pdev->dev, pctl->num_groups *
+			     sizeof(struct mvebu_pinctrl_group), GFP_KERNEL);
+	if (!pctl->groups) {
+		dev_err(&pdev->dev, "failed to alloc pinctrl groups\n");
+		return -ENOMEM;
+	}
+
+	/* assign mpp controls to groups */
+	gid = 0;
+	for (n = 0; n < soc->ncontrols; n++) {
+		struct mvebu_mpp_ctrl *ctrl = &soc->controls[n];
+		pctl->groups[gid].gid = gid;
+		pctl->groups[gid].ctrl = ctrl;
+		pctl->groups[gid].name = ctrl->name;
+		pctl->groups[gid].pins = ctrl->pins;
+		pctl->groups[gid].npins = ctrl->npins;
+
+		/* generic mvebu register control maps to a number of groups */
+		if (!ctrl->mpp_get && !ctrl->mpp_set) {
+			pctl->groups[gid].npins = 1;
+
+			for (k = 1; k < ctrl->npins; k++) {
+				gid++;
+				pctl->groups[gid].gid = gid;
+				pctl->groups[gid].ctrl = ctrl;
+				pctl->groups[gid].name = &ctrl->name[8*k];
+				pctl->groups[gid].pins = &ctrl->pins[k];
+				pctl->groups[gid].npins = 1;
+			}
+		}
+		gid++;
+	}
+
+	/* assign mpp modes to groups */
+	for (n = 0; n < soc->nmodes; n++) {
+		struct mvebu_mpp_mode *mode = &soc->modes[n];
+		struct mvebu_pinctrl_group *grp =
+			mvebu_pinctrl_find_group_by_pid(pctl, mode->pid);
+		unsigned num_settings;
+
+		if (!grp) {
+			dev_warn(&pdev->dev, "unknown pinctrl group %d\n",
+				mode->pid);
+			continue;
+		}
+
+		for (num_settings = 0; ;) {
+			struct mvebu_mpp_ctrl_setting *set =
+				&mode->settings[num_settings];
+
+			if (!set->name)
+				break;
+			num_settings++;
+
+			/* skip unsupported settings for this variant */
+			if (pctl->variant && !(pctl->variant & set->variant))
+				continue;
+
+			/* find gpio/gpo/gpi settings */
+			if (strcmp(set->name, "gpio") == 0)
+				set->flags = MVEBU_SETTING_GPI |
+					MVEBU_SETTING_GPO;
+			else if (strcmp(set->name, "gpo") == 0)
+				set->flags = MVEBU_SETTING_GPO;
+			else if (strcmp(set->name, "gpi") == 0)
+				set->flags = MVEBU_SETTING_GPI;
+		}
+
+		grp->settings = mode->settings;
+		grp->num_settings = num_settings;
+	}
+
+	ret = mvebu_pinctrl_dt_parse(pdev, pctl);
+	if (ret) {
+		/* look for pinmux functions in platform_device data */
+		dev_err(&pdev->dev, "unable to parse device tree\n");
+		return ret;
+	}
+
+	pctl->pctldev = pinctrl_register(&pctl->desc, &pdev->dev, pctl);
+	if (!pctl->pctldev) {
+		dev_err(&pdev->dev, "unable to register pinctrl driver\n");
+		return -EINVAL;
+	}
+
+	dev_info(&pdev->dev, "registered pinctrl driver\n");
+
+	/* register gpio ranges */
+	for (n = 0; n < soc->ngpioranges; n++)
+		pinctrl_add_gpio_range(pctl->pctldev, &soc->gpioranges[n]);
+
+	return 0;
+}
+
+int __devexit mvebu_pinctrl_remove(struct platform_device *pdev)
+{
+	struct mvebu_pinctrl *pctl = platform_get_drvdata(pdev);
+	pinctrl_unregister(pctl->pctldev);
+	return 0;
+}
diff --git a/drivers/pinctrl/pinctrl-mvebu.h b/drivers/pinctrl/pinctrl-mvebu.h
new file mode 100644
index 0000000..90bd3be
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-mvebu.h
@@ -0,0 +1,192 @@
+/*
+ * Marvell MVEBU pinctrl driver
+ *
+ * Authors: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *          Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __PINCTRL_MVEBU_H__
+#define __PINCTRL_MVEBU_H__
+
+/**
+ * struct mvebu_mpp_ctrl - describe a mpp control
+ * @name: name of the control group
+ * @pid: first pin id handled by this control
+ * @npins: number of pins controlled by this control
+ * @mpp_get: (optional) special function to get mpp setting
+ * @mpp_set: (optional) special function to set mpp setting
+ * @mpp_gpio_req: (optional) special function to request gpio
+ * @mpp_gpio_dir: (optional) special function to set gpio direction
+ *
+ * A mpp_ctrl describes a muxable unit, e.g. pin, group of pins, or
+ * internal function, inside the SoC. Each muxable unit can be switched
+ * between two or more different settings, e.g. assign mpp pin 13 to
+ * uart1 or sata.
+ *
+ * If optional mpp_get/_set functions are set these are used to get/set
+ * a specific mode. Otherwise it is assumed that the mpp control is based
+ * on 4-bit groups in subsequent registers. The optional mpp_gpio_req/_dir
+ * functions can be used to allow pin settings with varying gpio pins.
+ */
+struct mvebu_mpp_ctrl {
+	const char *name;
+	u8 pid;
+	u8 npins;
+	unsigned *pins;
+	int (*mpp_get)(struct mvebu_mpp_ctrl *ctrl, unsigned long *config);
+	int (*mpp_set)(struct mvebu_mpp_ctrl *ctrl, unsigned long config);
+	int (*mpp_gpio_req)(struct mvebu_mpp_ctrl *ctrl, u8 pid);
+	int (*mpp_gpio_dir)(struct mvebu_mpp_ctrl *ctrl, u8 pid, bool input);
+};
+
+/**
+ * struct mvebu_mpp_ctrl_setting - describe a mpp ctrl setting
+ * @val: ctrl setting value
+ * @name: ctrl setting name, e.g. uart2, spi0 - unique per mpp_mode
+ * @subname: (optional) additional ctrl setting name, e.g. rts, cts
+ * @variant: (optional) variant identifier mask
+ * @flags: (private) flags to store gpi/gpo/gpio capabilities
+ *
+ * A ctrl_setting describes a specific internal mux function that a mpp pin
+ * can be switched to. The value (val) will be written in the corresponding
+ * register for common mpp pin configuration registers on MVEBU. SoC specific
+ * mpp_get/_set function may use val to distinguish between different settings.
+ *
+ * The name will be used to switch to this setting in DT description, e.g.
+ * marvell,function = "uart2". subname is only for debugging purposes.
+ *
+ * If name is one of "gpi", "gpo", "gpio" gpio capabilities are
+ * parsed during initialization and stored in flags.
+ *
+ * The variant can be used to combine different revisions of one SoC to a
+ * common pinctrl driver. It is matched (AND) with variant of soc_info to
+ * determine if a setting is available on the current SoC revision.
+ */
+struct mvebu_mpp_ctrl_setting {
+	u8 val;
+	const char *name;
+	const char *subname;
+	u8 variant;
+	u8 flags;
+#define  MVEBU_SETTING_GPO	(1 << 0)
+#define  MVEBU_SETTING_GPI	(1 << 1)
+};
+
+/**
+ * struct mvebu_mpp_mode - link ctrl and settings
+ * @pid: first pin id handled by this mode
+ * @settings: list of settings available for this mode
+ *
+ * A mode connects all available settings with the corresponding mpp_ctrl
+ * given by pid.
+ */
+struct mvebu_mpp_mode {
+	u8 pid;
+	struct mvebu_mpp_ctrl_setting *settings;
+};
+
+/**
+ * struct mvebu_pinctrl_soc_info - SoC specific info passed to pinctrl-mvebu
+ * @variant: variant mask of soc_info
+ * @controls: list of available mvebu_mpp_ctrls
+ * @ncontrols: number of available mvebu_mpp_ctrls
+ * @modes: list of available mvebu_mpp_modes
+ * @nmodes: number of available mvebu_mpp_modes
+ * @gpioranges: list of pinctrl_gpio_ranges
+ * @ngpioranges: number of available pinctrl_gpio_ranges
+ *
+ * This struct describes all pinctrl related information for a specific SoC.
+ * If variant is unequal 0 it will be matched (AND) with variant of each
+ * setting and allows to distinguish between different revisions of one SoC.
+ */
+struct mvebu_pinctrl_soc_info {
+	u8 variant;
+	struct mvebu_mpp_ctrl *controls;
+	int ncontrols;
+	struct mvebu_mpp_mode *modes;
+	int nmodes;
+	struct pinctrl_gpio_range *gpioranges;
+	int ngpioranges;
+};
+
+#define MPP_REG_CTRL(_idl, _idh)				\
+	{							\
+		.name = NULL,					\
+		.pid = _idl,					\
+		.npins = _idh - _idl + 1,			\
+		.pins = (unsigned[_idh - _idl + 1]) { },	\
+		.mpp_get = NULL,				\
+		.mpp_set = NULL,				\
+		.mpp_gpio_req = NULL,				\
+		.mpp_gpio_dir = NULL,				\
+	}
+
+#define MPP_FUNC_CTRL(_idl, _idh, _name, _func)			\
+	{							\
+		.name = _name,					\
+		.pid = _idl,					\
+		.npins = _idh - _idl + 1,			\
+		.pins = (unsigned[_idh - _idl + 1]) { },	\
+		.mpp_get = _func ## _get,			\
+		.mpp_set = _func ## _set,			\
+		.mpp_gpio_req = NULL,				\
+		.mpp_gpio_dir = NULL,				\
+	}
+
+#define MPP_FUNC_GPIO_CTRL(_idl, _idh, _name, _func)		\
+	{							\
+		.name = _name,					\
+		.pid = _idl,					\
+		.npins = _idh - _idl + 1,			\
+		.pins = (unsigned[_idh - _idl + 1]) { },	\
+		.mpp_get = _func ## _get,			\
+		.mpp_set = _func ## _set,			\
+		.mpp_gpio_req = _func ## _gpio_req,		\
+		.mpp_gpio_dir = _func ## _gpio_dir,		\
+	}
+
+#define _MPP_VAR_FUNCTION(_val, _name, _subname, _mask)		\
+	{							\
+		.val = _val,					\
+		.name = _name,					\
+		.subname = _subname,				\
+		.variant = _mask,				\
+		.flags = 0,					\
+	}
+
+#if defined(CONFIG_DEBUG_FS)
+#define MPP_VAR_FUNCTION(_val, _name, _subname, _mask)		\
+	_MPP_VAR_FUNCTION(_val, _name, _subname, _mask)
+#else
+#define MPP_VAR_FUNCTION(_val, _name, _subname, _mask)		\
+	_MPP_VAR_FUNCTION(_val, _name, NULL, _mask)
+#endif
+
+#define MPP_FUNCTION(_val, _name, _subname)			\
+	MPP_VAR_FUNCTION(_val, _name, _subname, (u8)-1)
+
+#define MPP_MODE(_id, ...)					\
+	{							\
+		.pid = _id,					\
+		.settings = (struct mvebu_mpp_ctrl_setting[]){	\
+			__VA_ARGS__, { } },			\
+	}
+
+#define MPP_GPIO_RANGE(_id, _pinbase, _gpiobase, _npins)	\
+	{							\
+		.name = "mvebu-gpio",				\
+		.id = _id,					\
+		.pin_base = _pinbase,				\
+		.base = _gpiobase,				\
+		.npins = _npins,				\
+	}
+
+int mvebu_pinctrl_probe(struct platform_device *pdev);
+int mvebu_pinctrl_remove(struct platform_device *pdev);
+
+#endif
-- 
1.7.10.4

Re: [PATCH v2 1/9] pinctrl: mvebu: pinctrl driver core

From: Stephen Warren <hidden>
Date: 2012-08-22 20:43:16

On 08/22/2012 02:22 AM, Sebastian Hesselbarth wrote:
This patch adds a pinctrl driver core for Marvell SoCs plus DT
binding documentation. This core driver will be used by SoC family
specific drivers, i.e. Armada XP, Armada 370, Dove, Kirkwood, aso.
quoted hunk
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt
This, and all the other binding documents in this series, all look sane
to me.
quoted hunk
+++ b/drivers/pinctrl/pinctrl-mvebu.c
+static int mvebu_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
+	of_property_for_each_string(np, "marvell,pins", prop, group) {
+		struct mvebu_pinctrl_group *grp =
+			mvebu_pinctrl_find_group_by_name(pctl, group);
+
+		if (!grp) {
+			dev_err(pctl->dev, "unknown pin %s", group);
+			continue;
+		}
+
+		if (!mvebu_pinctrl_find_setting_by_name(pctl, grp, function)) {
+			dev_err(pctl->dev, "unsupported function %s on pin %s",
+				function, group);
+			continue;
+		}
The error-checking here isn't strictly necessary; the pinctrl core will
error-check all the names if/when the map entries are used. So, you
could probably get away with just assigning the pin/function names
directly into (*map) and hence remove some code here. Still, it's not a
big deal either way.
+static int __devinit mvebu_pinctrl_dt_parse_function(struct mvebu_pinctrl *pctl,
+static int __devinit mvebu_pinctrl_dt_parse(struct platform_device *pdev,
+					struct mvebu_pinctrl *pctl)
I don't understand what those two functions do, or a good chunk of
probe(). It seems like they're setting up the ability to get/set pin
configrations in addition to pin muxing, although if that's so, it seems
odd that none of the binding documents specify any way of controlling
pin configuration from device tree. Are you expecting drivers to call
APIs such as pin_config_set() directly, rather than controlling pin
config through DT?

Re: [PATCH v2 7/9] ARM: mvebu: Add pinctrl support to Armada XP SoCs

From: Stephen Warren <hidden>
Date: 2012-08-22 20:45:26

On 08/22/2012 02:22 AM, Sebastian Hesselbarth wrote:
This commits adds the necessary device tree information to define the
compatible property for the pinctrl driver instance of Armada XP SoCs.

Until now, the device tree representation considered the Armada XP as
a single SoC. But in fact, there are three different SoCs in the
Armada XP families, with different number of CPU cores, different
number of Ethernet interfaces... and different number of muxable pins
or functions. We therefore introduce three armada-xp-mv78xx0.dtsi for
the three SoCs of the Armada XP family. The current armada-xp-db.dts
evaluation board uses the MV78460 variant of the SoC.
quoted hunk
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+/include/ "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP family SoC";
+	compatible = "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
Since each of these files is specifically for a different SoC, I'd
expect them all to say something different in the model property?
quoted hunk
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+	model = "Marvell Armada XP family SoC";
+	compatible = "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
quoted hunk
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+	model = "Marvell Armada XP family SoC";
+	compatible = "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";

Re: [PATCH v2 8/9] ARM: mvebu: Add pinctrl support to Armada 370 SoC

From: Stephen Warren <hidden>
Date: 2012-08-22 20:46:28

On 08/22/2012 02:22 AM, Sebastian Hesselbarth wrote:
This commits adds the necessary device tree information to define the
compatible property for the pinctrl driver instance of Armada 370 SoC.
quoted hunk
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
+
+                pinctrl at d0018000 {
+			        compatible = "marvell,mv88f6710-pinctrl";
+	        };
The indentation here is a mix of spaces and TABs.

Re: [PATCH v2 1/9] pinctrl: mvebu: pinctrl driver core

From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: 2012-08-23 09:45:33

On 8/22/12, Stephen Warren [off-list ref] wrote:
On 08/22/2012 02:22 AM, Sebastian Hesselbarth wrote:
quoted
+++ b/drivers/pinctrl/pinctrl-mvebu.c
quoted
+static int mvebu_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
quoted
+	of_property_for_each_string(np, "marvell,pins", prop, group) {
+		struct mvebu_pinctrl_group *grp =
+			mvebu_pinctrl_find_group_by_name(pctl, group);
+
+		if (!grp) {
+			dev_err(pctl->dev, "unknown pin %s", group);
+			continue;
+		}
+
+		if (!mvebu_pinctrl_find_setting_by_name(pctl, grp, function)) {
+			dev_err(pctl->dev, "unsupported function %s on pin %s",
+				function, group);
+			continue;
+		}
The error-checking here isn't strictly necessary; the pinctrl core will
error-check all the names if/when the map entries are used. So, you
could probably get away with just assigning the pin/function names
directly into (*map) and hence remove some code here. Still, it's not a
big deal either way.
Hi Stephen,

as these error checks are only performed once, I'd like to have them there
as they give hints when someone uses wrong marvell,pins/function names
in DT.
quoted
+static int __devinit mvebu_pinctrl_dt_parse_function(struct mvebu_pinctrl
*pctl,
quoted
+static int __devinit mvebu_pinctrl_dt_parse(struct platform_device
*pdev,
+					struct mvebu_pinctrl *pctl)
I don't understand what those two functions do, or a good chunk of
probe(). It seems like they're setting up the ability to get/set pin
configrations in addition to pin muxing, although if that's so, it seems
odd that none of the binding documents specify any way of controlling
pin configuration from device tree. Are you expecting drivers to call
APIs such as pin_config_set() directly, rather than controlling pin
config through DT?
probe() receives some structs from the SoC specific driver stubs that
describe, e.g. how many muxable pins are available, which pingroup they
belong to (marvell,pins), what valid register values are and how they are
named (marvell,function). Although, all mvebu SoC share a good part of
pinmux register layout, there are especially for dove some very different
ways to mux pins. As mvebu pinctrl is a true mux-only driver, i.e. no
pin drive strength or pin direction configuration, we decided not to have
single pins controlable but only pingroups even if they comprise only a
single pin.

dt_parse() and dt_parse_function() build up structs that get used later on
in mvebu_pinmux_ops that require indexed functions. I can join them with
dt_node_to_map() but that would require incremental kzalloc for the
corresponding array. Or I could (functionally) leave dt_parse() to allocate
the array and only join dt_parse_function() with dt_node_to_map().

There is an example of how to use pinctrl in marvell.mvebu-pinctrl.txt:
uart1: serial at 12100 {
	compatible = "ns16550a";
	reg = <0x12100 0x100>;
	reg-shift = <2>;
	interrupts = <7>;

	pinctrl-0 = <&pmx_uart1_sw>;
};

pinctrl: pinctrl at d0200 {
	compatible = "marvell,dove-pinctrl";
	reg = <0xd0200 0x20>;

	pmx_uart1_sw: pmx-uart1-sw {
		marvell,pins = "mpp_uart1";
		marvell,function = "uart1";
	};
};

In my understanding this will allow uart1 to switch the pingroup "mpp_uart1"
to the function "uart1". The pinctrl core driver is taking care of
translating mpp_uart1
to the corresponding pingroup and mvebu core driver of translating
uart1 into the required
register values to set the requested function. Is it so odd, that we
use names instead
of direct register values in DT? I agree, that maybe picking an example for dove
that is a little bit different in pingroup naming isn't the best
choice but it still gives
you an idea how to use it.

Consider this (virtual) example:
Muxing some SATA functions to pins 24 and 37 would require to set
register values
to 0x3 on pin 24 and 0x6 on pin 37. The proposed driver still allows
us to have a DT
description of

pmx_sata_example: pmx-sata-example {
	marvell,pins = "mpp24", "mpp37";
	marvell,function = "sata";
};

because the SoC specific driver passes function "sata" on pins 24 and
37 with the
corresponding register values. These are fed by the mvebu core driver
that builds
up all required pins, pingroups, and pinmux functions.

Sebastian

Re: [PATCH v2 1/9] pinctrl: mvebu: pinctrl driver core

From: Stephen Warren <hidden>
Date: 2012-08-23 17:54:20

On 08/23/2012 03:45 AM, Sebastian Hesselbarth wrote:
On 8/22/12, Stephen Warren [off-list ref] wrote:
quoted
On 08/22/2012 02:22 AM, Sebastian Hesselbarth wrote:
quoted
+++ b/drivers/pinctrl/pinctrl-mvebu.c
quoted
+static int mvebu_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
quoted
+	of_property_for_each_string(np, "marvell,pins", prop, group) {
+		struct mvebu_pinctrl_group *grp =
+			mvebu_pinctrl_find_group_by_name(pctl, group);
+
+		if (!grp) {
+			dev_err(pctl->dev, "unknown pin %s", group);
+			continue;
+		}
+
+		if (!mvebu_pinctrl_find_setting_by_name(pctl, grp, function)) {
+			dev_err(pctl->dev, "unsupported function %s on pin %s",
+				function, group);
+			continue;
+		}
The error-checking here isn't strictly necessary; the pinctrl core will
error-check all the names if/when the map entries are used. So, you
could probably get away with just assigning the pin/function names
directly into (*map) and hence remove some code here. Still, it's not a
big deal either way.
Hi Stephen,

as these error checks are only performed once, I'd like to have them there
as they give hints when someone uses wrong marvell,pins/function names
in DT.
quoted
quoted
+static int __devinit mvebu_pinctrl_dt_parse_function(struct mvebu_pinctrl
*pctl,
quoted
+static int __devinit mvebu_pinctrl_dt_parse(struct platform_device
*pdev,
+					struct mvebu_pinctrl *pctl)
I don't understand what those two functions do, or a good chunk of
probe(). It seems like they're setting up the ability to get/set pin
configrations in addition to pin muxing, although if that's so, it seems
odd that none of the binding documents specify any way of controlling
pin configuration from device tree. Are you expecting drivers to call
APIs such as pin_config_set() directly, rather than controlling pin
config through DT?
probe() receives some structs from the SoC specific driver stubs that
describe, e.g. how many muxable pins are available, which pingroup they
belong to (marvell,pins), what valid register values are and how they are
named (marvell,function). Although, all mvebu SoC share a good part of
pinmux register layout, there are especially for dove some very different
ways to mux pins. As mvebu pinctrl is a true mux-only driver, i.e. no
pin drive strength or pin direction configuration, we decided not to have
single pins controlable but only pingroups even if they comprise only a
single pin.

dt_parse() and dt_parse_function() build up structs that get used later on
in mvebu_pinmux_ops that require indexed functions. I can join them with
dt_node_to_map() but that would require incremental kzalloc for the
corresponding array. Or I could (functionally) leave dt_parse() to allocate
the array and only join dt_parse_function() with dt_node_to_map().
So everything you said makes sense, in that the core driver is
parameterizable and receives data from a SoC-variant-specific driver
indicating which pins/groups/functions are available. I'm still not sure
though why the translation of the pin/group/function structures passed
to probe into other data structures requires accessing the DT at all;
the set of available pins/groups/functions isn't configured through DT,
and doesn't need to be limited to only those options actually used in
DT, so can't you just process all the data that's passed to probe
without interaction with the DT?

Re: [PATCH v2 1/9] pinctrl: mvebu: pinctrl driver core

From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: 2012-08-23 20:31:10

On 08/23/2012 07:54 PM, Stephen Warren wrote:
quoted
dt_parse() and dt_parse_function() build up structs that get used later on
in mvebu_pinmux_ops that require indexed functions. I can join them with
dt_node_to_map() but that would require incremental kzalloc for the
corresponding array. Or I could (functionally) leave dt_parse() to allocate
the array and only join dt_parse_function() with dt_node_to_map().
So everything you said makes sense, in that the core driver is
parameterizable and receives data from a SoC-variant-specific driver
indicating which pins/groups/functions are available. I'm still not sure
though why the translation of the pin/group/function structures passed
to probe into other data structures requires accessing the DT at all;
the set of available pins/groups/functions isn't configured through DT,
and doesn't need to be limited to only those options actually used in
DT, so can't you just process all the data that's passed to probe
without interaction with the DT?
Hmm, maybe I still don't quite understand the terminology of pinctrl/pinmux
core completely. What exactly should mvebu_pinmux_get_funcs_count return
if not the number of DT node children?

I thought that a "function" in the terminology of pinctrl/pinmux core is
a list of pingroups and corresponding values to actually set it to e.g. uart1.
In pinctrl-mvebu this would be one marvell,function assigned to one or more
marvell,pins.

If the above is correct, I still need to access DT in probe() at least to count
the number of children passed to allocate an array for mvebu_pinmux_ops callbacks
that get indexed by "fid" (pctl->functions).

Sebastian

Re: [PATCH v2 1/9] pinctrl: mvebu: pinctrl driver core

From: Stephen Warren <hidden>
Date: 2012-08-23 21:26:16

On 08/23/2012 02:31 PM, Sebastian Hesselbarth wrote:
On 08/23/2012 07:54 PM, Stephen Warren wrote:
quoted
quoted
dt_parse() and dt_parse_function() build up structs that get used
later on
in mvebu_pinmux_ops that require indexed functions. I can join them with
dt_node_to_map() but that would require incremental kzalloc for the
corresponding array. Or I could (functionally) leave dt_parse() to
allocate
the array and only join dt_parse_function() with dt_node_to_map().
So everything you said makes sense, in that the core driver is
parameterizable and receives data from a SoC-variant-specific driver
indicating which pins/groups/functions are available. I'm still not sure
though why the translation of the pin/group/function structures passed
to probe into other data structures requires accessing the DT at all;
the set of available pins/groups/functions isn't configured through DT,
and doesn't need to be limited to only those options actually used in
DT, so can't you just process all the data that's passed to probe
without interaction with the DT?
Hmm, maybe I still don't quite understand the terminology of pinctrl/pinmux
core completely. What exactly should mvebu_pinmux_get_funcs_count return
if not the number of DT node children?
In HW, you have:

* A number of pins

* In some cases, multiple pins are controlled by a single register
field, so there are groups of pins, whose pins all get mux'd at once.

* In some cases, SW chooses to control multiple pins at once even if the
HW allows otherwise, and these are also represented as groups.

* A (mux) function represents what options (signals, modules, ...) are
available to be mux'd onto any given pin or group of pins.

If all of your pins/groups can support 4 different mux choices 0..3
(even though the interpretation of values 0..3 may differ per pin/group)
you may simply have functions 0, 1, 2, 3 exposed by your driver.

Alternatively, you may define a function for each logical HW module
(e.g. UART1, UART2, SPI1, SPI2, MMC1...) that exists in your SoC, or
even per each separate subset of signals (e.g. UART1 RX/TX, UART 1
RTS/CTS, UART 2 RX/TX/RTS/CTS, ...).

In a driver where the set of pins, groups, and functions known to the
driver is defined as static data in the driver itself (which I believe
covers your driver; IIRC I saw all those tables in the patch), then
you'd simply count up all the defined function names/IDs available, and
return that from pinmux_ops.get_functions_count(). In this case, the
number of functions is entirely static, being defined by the SoC HW
design, and hence DT content has absolutely no impact on it. For
reference, this is how the Tegra pinctrl drivers work.

In a driver where the set of pins, groups, and functions known to the
driver is not hard-coded into the driver itself, but instead derived
from DT content (which is useful for a driver that works for say 10
different similar SoCs, each with slightly different sets of actual
pins/groups/functions, but where you don't want to hard-code all the
tables into the driver), then you may need to parse DT to extract the
definitions of those pins/groups/functions. Then, there's the question
of how to represent the set of known pins/groups/function in DT; do you
have explicit tables for this, or reverse engineer the tables based on
whichever pins/groups/function just happen to be used by the board
you're running on, in which cases the reverse-engineered lists will
probably not include all options the HW could support, given one
particular DT file. Anyway, as I said, I don't think this approach
applies to your driver anyway since IIRC I did see all the data tables
in the patch.

As you may have guessed, I strongly prefer the hard-coded static table
based approach, or at least separating the definition of known
pins/groups/functions from the configuration nodes that define which
particular mux settings to actually use.

Puting this all a little more simply, the pinctrl core wants to generate
a list of all known functions. It is a single global/unified list. It
first calls pinmux_ops.get_functions_count() to find out how many
functions there are in the list, then pinmux_ops.get_function_name() for
each one to find its name, then pinmux_ops.get_function_groups() to find
out which groups allow that function to be mux'd onto them.

Re: [PATCH v2 1/9] pinctrl: mvebu: pinctrl driver core

From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: 2012-08-23 23:01:22

On 08/23/2012 11:26 PM, Stephen Warren wrote:
As you may have guessed, I strongly prefer the hard-coded static table
based approach, or at least separating the definition of known
pins/groups/functions from the configuration nodes that define which
particular mux settings to actually use.

Puting this all a little more simply, the pinctrl core wants to generate
a list of all known functions. It is a single global/unified list. It
first calls pinmux_ops.get_functions_count() to find out how many
functions there are in the list, then pinmux_ops.get_function_name() for
each one to find its name, then pinmux_ops.get_function_groups() to find
out which groups allow that function to be mux'd onto them.
Ok, now this becomes a little bit more clear to me.

Consider uart1 on dove is muxable to:
mpp2 uart1(rts), mpp3 uart1(cts), mpp21 uart1(rts), mpp22 uart1(cts),
and finally mpp_uart1(rx and tx).

So possible, valid combinations for uart1 would be:
(a) mpp_uart1;
(b) mpp_uart1, mpp2, mpp3;
(c) mpp_uart1, mpp21, mpp22;
(d) mpp_uart1, mpp2, mpp22;
(e) mpp_uart1, mpp21, mpp3;

Now what we currently do is, use DT to setup all known functions with e.g.
marvell,pins = "mpp_uart1", "mpp2", "mpp22" and marvell,function = "uart1".
This requires to count all pinctrl DT node children to count the known
functions that can ever be muxed to. It will never allow to mux uart1 to sw
flow control during run-time when there was no DT child node for it.

But you are proposing to scan the list passed from SoC specific driver for all
possible marvell,function ("uart1", "uart2", "sdio0", ...) and build up lists
of pingroups that can be used with this specific marvell,function; or even build
up lists of pingroups that allow uart1(rts), and another one for uart1(cts), ...?

Sebastian

Re: [PATCH v2 1/9] pinctrl: mvebu: pinctrl driver core

From: Stephen Warren <hidden>
Date: 2012-08-24 03:34:46

On 08/23/2012 05:01 PM, Sebastian Hesselbarth wrote:
On 08/23/2012 11:26 PM, Stephen Warren wrote:
quoted
As you may have guessed, I strongly prefer the hard-coded static table
based approach, or at least separating the definition of known
pins/groups/functions from the configuration nodes that define which
particular mux settings to actually use.

Puting this all a little more simply, the pinctrl core wants to generate
a list of all known functions. It is a single global/unified list. It
first calls pinmux_ops.get_functions_count() to find out how many
functions there are in the list, then pinmux_ops.get_function_name() for
each one to find its name, then pinmux_ops.get_function_groups() to find
out which groups allow that function to be mux'd onto them.
Ok, now this becomes a little bit more clear to me.

Consider uart1 on dove is muxable to:
mpp2 uart1(rts), mpp3 uart1(cts), mpp21 uart1(rts), mpp22 uart1(cts),
and finally mpp_uart1(rx and tx).

So possible, valid combinations for uart1 would be:
(a) mpp_uart1;
(b) mpp_uart1, mpp2, mpp3;
(c) mpp_uart1, mpp21, mpp22;
(d) mpp_uart1, mpp2, mpp22;
(e) mpp_uart1, mpp21, mpp3;

Now what we currently do is, use DT to setup all known functions with e.g.
marvell,pins = "mpp_uart1", "mpp2", "mpp22" and marvell,function = "uart1".
This requires to count all pinctrl DT node children to count the known
functions that can ever be muxed to. It will never allow to mux uart1 to sw
flow control during run-time when there was no DT child node for it.
In the example above, there is a single function named "uart1". If this
was all the HW supported, I'd expect the driver's
pinmux_ops.get_functions_count() to return 1,
pinmux_ops.get_function_name(0) to return "uart1", and
pinmux_ops.get_function_name(n>0) to return an error.

In practice, I assume there are many other options that can be muxed
onto mpp2/3/21/22/uart1, so they'd be included in the list as well.
But you are proposing to scan the list passed from SoC specific driver
for all
possible marvell,function ("uart1", "uart2", "sdio0", ...) and build up
lists
of pingroups that can be used with this specific marvell,function; or
even build
up lists of pingroups that allow uart1(rts), and another one for
uart1(cts), ...?
I don't expect any scanning, no. I'd expect that tables provided by the
SoC-specific drivers to be:

* A table of pins
* A table of groups
* A table of functions

No scanning involved.

Re: [PATCH 01/11] pinctrl: mvebu: pinctrl driver core

From: Andrew Lunn <andrew@lunn.ch>
Date: 2012-08-25 08:23:08

On Mon, Aug 20, 2012 at 11:09:51AM +0200, Linus Walleij wrote:
On Sat, Aug 11, 2012 at 2:56 PM, Sebastian Hesselbarth
[off-list ref] wrote:
quoted
This patch adds a pinctrl driver core for Marvell SoCs plus DT
binding documentation. This core driver will be used by SoC family
specific drivers, i.e. Armada XP, Armada 370, Dove, Kirkwood, aso.
Thanks for dealing with this, much appreaciated!

Are you taking this patch series through some Marvell tree or do you want
me to carry it in the pinctrl tree?
Hi Linus

We can carry it thought the Marvell tree. 

   Andrew

Re: [PATCH v2 1/9] pinctrl: mvebu: pinctrl driver core

From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: 2012-08-25 15:53:58

On 08/24/2012 05:34 AM, Stephen Warren wrote:
On 08/23/2012 05:01 PM, Sebastian Hesselbarth wrote:
quoted
So possible, valid combinations for uart1 would be:
(a) mpp_uart1;
(b) mpp_uart1, mpp2, mpp3;
(c) mpp_uart1, mpp21, mpp22;
(d) mpp_uart1, mpp2, mpp22;
(e) mpp_uart1, mpp21, mpp3;
 [...]
In the example above, there is a single function named "uart1". If this
was all the HW supported, I'd expect the driver's
pinmux_ops.get_functions_count() to return 1,
pinmux_ops.get_function_name(0) to return "uart1", and
pinmux_ops.get_function_name(n>0) to return an error.

In practice, I assume there are many other options that can be muxed
onto mpp2/3/21/22/uart1, so they'd be included in the list as well.

I don't expect any scanning, no. I'd expect that tables provided by the
SoC-specific drivers to be:

* A table of pins
* A table of groups
* A table of functions

No scanning involved.
Stephen,

now I do understand but in the current driver we pass pingroups associated
with the available functions, i.e. "mpp2" with "uart1", "uart2", "sdio0", aso.
IMHO for the above three functions it would be better to have functions associated
with the corresponding groups, i.e. "uart1" with "mpp_uart1", "mpp2", "mpp3", aso.

That would require some larger rework of the driver and therefore I just
wanted to make sure, that I hit your expectations/explanations.

Sebastian

Re: [PATCH v2 1/9] pinctrl: mvebu: pinctrl driver core

From: Stephen Warren <hidden>
Date: 2012-08-27 04:34:00

On 08/25/2012 08:53 AM, Sebastian Hesselbarth wrote:
On 08/24/2012 05:34 AM, Stephen Warren wrote:
quoted
On 08/23/2012 05:01 PM, Sebastian Hesselbarth wrote:
quoted
So possible, valid combinations for uart1 would be:
(a) mpp_uart1;
(b) mpp_uart1, mpp2, mpp3;
(c) mpp_uart1, mpp21, mpp22;
(d) mpp_uart1, mpp2, mpp22;
(e) mpp_uart1, mpp21, mpp3;
 [...]
In the example above, there is a single function named "uart1". If this
was all the HW supported, I'd expect the driver's
pinmux_ops.get_functions_count() to return 1,
pinmux_ops.get_function_name(0) to return "uart1", and
pinmux_ops.get_function_name(n>0) to return an error.

In practice, I assume there are many other options that can be muxed
onto mpp2/3/21/22/uart1, so they'd be included in the list as well.

I don't expect any scanning, no. I'd expect that tables provided by the
SoC-specific drivers to be:

* A table of pins
* A table of groups
* A table of functions

No scanning involved.
Stephen,

now I do understand but in the current driver we pass pingroups associated
with the available functions, i.e. "mpp2" with "uart1", "uart2",
"sdio0", aso.
IMHO for the above three functions it would be better to have functions
associated
with the corresponding groups, i.e. "uart1" with "mpp_uart1", "mpp2",
"mpp3", aso.
The pinctrl subsystem does expect a list of functions, and for each
function, a list of the groups where it can be selected. I admit that
when I think about this, it's slightly backward, since HW typically has
a list of pins/groups, and for each, a certain set of functions can be
selected. Oh well...

Re: [PATCH 03/11] pinctrl: mvebu: kirkwood pinctrl driver

From: Ben Dooks <hidden>
Date: 2012-08-27 13:52:59

On 20/08/2012 06:49, Linus Walleij wrote:
On Sat, Aug 11, 2012 at 2:56 PM, Sebastian Hesselbarth
[off-list ref] wrote:
quoted
This patch adds a SoC specific pinctrl driver for Marvell Kirkwood 
SoCs
plus DT binding documentation. This driver will use the mvebu 
pinctrl
driver core.
Thanks for working on Kirkwood. Love this platform.
quoted
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index cd3d827..361f513 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -596,6 +596,7 @@ config ARCH_KIRKWOOD
        select GENERIC_CLOCKEVENTS
        select NEED_MACH_IO_H
        select PLAT_ORION
+       select PINCTRL
select PINCTRL_KIRKWOOD too I think.
Then it's just automatic.
quoted
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index e2427eb..1f84090 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -147,7 +147,7 @@ config PINCTRL_COH901

 config PINCTRL_MVEBU
        bool "Marvell SoC pin controller drivers"
-       depends on ARCH_MVEBU || ARCH_DOVE
+       depends on ARCH_MVEBU || ARCH_DOVE || ARCH_KIRKWOOD
As stated elsewhere I think this should be
depends on PLAT_ORION
quoted
+config PINCTRL_KIRKWOOD
+       bool "Support for Marvell Kirkwood SoCs"
+       depends on PINCTRL_MVEBU
depends on ARCH_KIRKWOOD
select PINCTRL_MVEBU

(...)
quoted
diff --git a/drivers/pinctrl/pinctrl-kirkwood.c 
b/drivers/pinctrl/pinctrl-kirkwood.c
+static struct mvebu_pinctrl_soc_info kirkwood_pinctrl_info;
+
+static struct of_device_id kirkwood_pinctrl_of_match[] 
__devinitdata = {
+       { .compatible = "marvell,88f6180-pinctrl",
+                                         .data = (void 
*)VARIANT_MV88F6180 },
+       { .compatible = "marvell,88f6190-pinctrl",
+                                         .data = (void 
*)VARIANT_MV88F6190 },
+       { .compatible = "marvell,88f6192-pinctrl",
+                                         .data = (void 
*)VARIANT_MV88F6192 },
+       { .compatible = "marvell,88f6281-pinctrl",
+                                         .data = (void 
*)VARIANT_MV88F6281 },
+       { .compatible = "marvell,88f6282-pinctrl",
+                                         .data = (void 
*)VARIANT_MV88F6282 },
+       { }
+};
I'm thinking this variant should maybe be an enum... unless it is
strongly established somewhere in Orion/Marvell stuff.
quoted
+static int __devinit kirkwood_pinctrl_probe(struct platform_device 
*pdev)
+{
+       struct mvebu_pinctrl_soc_info *soc = &kirkwood_pinctrl_info;
+       const struct of_device_id *match =
+               of_match_device(kirkwood_pinctrl_of_match, 
&pdev->dev);
+
+       if (match) {
+               soc->variant = (unsigned)match->data & 0xff;
+               switch (soc->variant) {
+               case VARIANT_MV88F6180:
+                       soc->controls = mv88f6180_mpp_controls;
+                       soc->ncontrols = 
ARRAY_SIZE(mv88f6180_mpp_controls);
+                       soc->modes = mv88f6xxx_mpp_modes;
+                       soc->nmodes = 
ARRAY_SIZE(mv88f6xxx_mpp_modes);
+                       soc->gpioranges = mv88f6180_gpio_ranges;
+                       soc->ngpioranges = 
ARRAY_SIZE(mv88f6180_gpio_ranges);
+                       break;
+               case VARIANT_MV88F6190:
+               case VARIANT_MV88F6192:
+                       soc->controls = mv88f619x_mpp_controls;
+                       soc->ncontrols = 
ARRAY_SIZE(mv88f619x_mpp_controls);
+                       soc->modes = mv88f6xxx_mpp_modes;
+                       soc->nmodes = 
ARRAY_SIZE(mv88f6xxx_mpp_modes);
+                       soc->gpioranges = mv88f619x_gpio_ranges;
+                       soc->ngpioranges = 
ARRAY_SIZE(mv88f619x_gpio_ranges);
+                       break;
+               case VARIANT_MV88F6281:
+               case VARIANT_MV88F6282:
+                       soc->controls = mv88f628x_mpp_controls;
+                       soc->ncontrols = 
ARRAY_SIZE(mv88f628x_mpp_controls);
+                       soc->modes = mv88f6xxx_mpp_modes;
+                       soc->nmodes = 
ARRAY_SIZE(mv88f6xxx_mpp_modes);
+                       soc->gpioranges = mv88f628x_gpio_ranges;
+                       soc->ngpioranges = 
ARRAY_SIZE(mv88f628x_gpio_ranges);
+                       break;
+               }
+               pdev->dev.platform_data = soc;
+       }
+       return mvebu_pinctrl_probe(pdev);
+}
Why not have structures defining the soc-> parameters and use that in 
the
of_match list?

-- 
Ben

Re: [PATCH 03/11] pinctrl: mvebu: kirkwood pinctrl driver

From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: 2012-08-27 19:19:26

On 08/27/2012 03:43 PM, Ben Dooks wrote:
On 20/08/2012 06:49, Linus Walleij wrote:
quoted
On Sat, Aug 11, 2012 at 2:56 PM, Sebastian Hesselbarth
[off-list ref] wrote:
(...)
quoted
diff --git a/drivers/pinctrl/pinctrl-kirkwood.c
b/drivers/pinctrl/pinctrl-kirkwood.c
+static struct mvebu_pinctrl_soc_info kirkwood_pinctrl_info;
+
+static struct of_device_id kirkwood_pinctrl_of_match[] __devinitdata
= {
+ { .compatible = "marvell,88f6180-pinctrl",
+ .data = (void *)VARIANT_MV88F6180 },
+ { .compatible = "marvell,88f6190-pinctrl",
+ .data = (void *)VARIANT_MV88F6190 },
+ { .compatible = "marvell,88f6192-pinctrl",
+ .data = (void *)VARIANT_MV88F6192 },
+ { .compatible = "marvell,88f6281-pinctrl",
+ .data = (void *)VARIANT_MV88F6281 },
+ { .compatible = "marvell,88f6282-pinctrl",
+ .data = (void *)VARIANT_MV88F6282 },
+ { }
+};
I'm thinking this variant should maybe be an enum... unless it is
strongly established somewhere in Orion/Marvell stuff.
quoted
+static int __devinit kirkwood_pinctrl_probe(struct platform_device
*pdev)
+{
+ struct mvebu_pinctrl_soc_info *soc = &kirkwood_pinctrl_info;
+ const struct of_device_id *match =
+ of_match_device(kirkwood_pinctrl_of_match, &pdev->dev);
+
+ if (match) {
+ soc->variant = (unsigned)match->data & 0xff;
+ switch (soc->variant) {
+ case VARIANT_MV88F6180:
+ soc->controls = mv88f6180_mpp_controls;
+ soc->ncontrols = ARRAY_SIZE(mv88f6180_mpp_controls);
+ soc->modes = mv88f6xxx_mpp_modes;
+ soc->nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes);
+ soc->gpioranges = mv88f6180_gpio_ranges;
+ soc->ngpioranges = ARRAY_SIZE(mv88f6180_gpio_ranges);
+ break;
+ case VARIANT_MV88F6190:
+ case VARIANT_MV88F6192:
+ soc->controls = mv88f619x_mpp_controls;
+ soc->ncontrols = ARRAY_SIZE(mv88f619x_mpp_controls);
+ soc->modes = mv88f6xxx_mpp_modes;
+ soc->nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes);
+ soc->gpioranges = mv88f619x_gpio_ranges;
+ soc->ngpioranges = ARRAY_SIZE(mv88f619x_gpio_ranges);
+ break;
+ case VARIANT_MV88F6281:
+ case VARIANT_MV88F6282:
+ soc->controls = mv88f628x_mpp_controls;
+ soc->ncontrols = ARRAY_SIZE(mv88f628x_mpp_controls);
+ soc->modes = mv88f6xxx_mpp_modes;
+ soc->nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes);
+ soc->gpioranges = mv88f628x_gpio_ranges;
+ soc->ngpioranges = ARRAY_SIZE(mv88f628x_gpio_ranges);
+ break;
+ }
+ pdev->dev.platform_data = soc;
+ }
+ return mvebu_pinctrl_probe(pdev);
+}
Why not have structures defining the soc-> parameters and use that in the
of_match list?
Ben,

functionally it is equivalent and IMHO using soc structs doesn't improve
readability here. I there any other good reason to have structs for each
soc?

Sebastian

Re: [PATCH 03/11] pinctrl: mvebu: kirkwood pinctrl driver

From: Stephen Warren <hidden>
Date: 2012-08-27 20:02:38

On 08/27/2012 12:19 PM, Sebastian Hesselbarth wrote:
On 08/27/2012 03:43 PM, Ben Dooks wrote:
quoted
On 20/08/2012 06:49, Linus Walleij wrote:
quoted
On Sat, Aug 11, 2012 at 2:56 PM, Sebastian Hesselbarth
[off-list ref] wrote:
(...)
quoted
diff --git a/drivers/pinctrl/pinctrl-kirkwood.c
b/drivers/pinctrl/pinctrl-kirkwood.c
+static struct mvebu_pinctrl_soc_info kirkwood_pinctrl_info;
+
+static struct of_device_id kirkwood_pinctrl_of_match[] __devinitdata
= {
+ { .compatible = "marvell,88f6180-pinctrl",
+ .data = (void *)VARIANT_MV88F6180 },
+ { .compatible = "marvell,88f6190-pinctrl",
+ .data = (void *)VARIANT_MV88F6190 },
+ { .compatible = "marvell,88f6192-pinctrl",
+ .data = (void *)VARIANT_MV88F6192 },
+ { .compatible = "marvell,88f6281-pinctrl",
+ .data = (void *)VARIANT_MV88F6281 },
+ { .compatible = "marvell,88f6282-pinctrl",
+ .data = (void *)VARIANT_MV88F6282 },
+ { }
+};
I'm thinking this variant should maybe be an enum... unless it is
strongly established somewhere in Orion/Marvell stuff.
quoted
+static int __devinit kirkwood_pinctrl_probe(struct platform_device
*pdev)
+{
+ struct mvebu_pinctrl_soc_info *soc = &kirkwood_pinctrl_info;
+ const struct of_device_id *match =
+ of_match_device(kirkwood_pinctrl_of_match, &pdev->dev);
+
+ if (match) {
+ soc->variant = (unsigned)match->data & 0xff;
+ switch (soc->variant) {
+ case VARIANT_MV88F6180:
+ soc->controls = mv88f6180_mpp_controls;
+ soc->ncontrols = ARRAY_SIZE(mv88f6180_mpp_controls);
+ soc->modes = mv88f6xxx_mpp_modes;
+ soc->nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes);
+ soc->gpioranges = mv88f6180_gpio_ranges;
+ soc->ngpioranges = ARRAY_SIZE(mv88f6180_gpio_ranges);
+ break;
+ case VARIANT_MV88F6190:
+ case VARIANT_MV88F6192:
+ soc->controls = mv88f619x_mpp_controls;
+ soc->ncontrols = ARRAY_SIZE(mv88f619x_mpp_controls);
+ soc->modes = mv88f6xxx_mpp_modes;
+ soc->nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes);
+ soc->gpioranges = mv88f619x_gpio_ranges;
+ soc->ngpioranges = ARRAY_SIZE(mv88f619x_gpio_ranges);
+ break;
+ case VARIANT_MV88F6281:
+ case VARIANT_MV88F6282:
+ soc->controls = mv88f628x_mpp_controls;
+ soc->ncontrols = ARRAY_SIZE(mv88f628x_mpp_controls);
+ soc->modes = mv88f6xxx_mpp_modes;
+ soc->nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes);
+ soc->gpioranges = mv88f628x_gpio_ranges;
+ soc->ngpioranges = ARRAY_SIZE(mv88f628x_gpio_ranges);
+ break;
+ }
+ pdev->dev.platform_data = soc;
+ }
+ return mvebu_pinctrl_probe(pdev);
+}
Why not have structures defining the soc-> parameters and use that in the
of_match list?
Ben,

functionally it is equivalent and IMHO using soc structs doesn't improve
readability here. I there any other good reason to have structs for each
soc?
Well, it does change from 6 assignments down to one, and remove the need
for a switch statement - i.e. all of the code quoted above becomes just
roughly:

*soc = *match->data;

Re: [PATCH v2 1/9] pinctrl: mvebu: pinctrl driver core

From: Linus Walleij <hidden>
Date: 2012-09-02 07:30:48

On Mon, Aug 27, 2012 at 6:33 AM, Stephen Warren [off-list ref] wrote:
On 08/25/2012 08:53 AM, Sebastian Hesselbarth wrote:
quoted
now I do understand but in the current driver we pass pingroups associated
with the available functions, i.e. "mpp2" with "uart1", "uart2",
"sdio0", aso.
IMHO for the above three functions it would be better to have functions
associated
with the corresponding groups, i.e. "uart1" with "mpp_uart1", "mpp2",
"mpp3", aso.
The pinctrl subsystem does expect a list of functions, and for each
function, a list of the groups where it can be selected. I admit that
when I think about this, it's slightly backward, since HW typically has
a list of pins/groups, and for each, a certain set of functions can be
selected. Oh well...
I agree that this is how we engineered it, would it create big hassles
for you to fix up the driver so it's the other way around Sebastian?

I understand that the driver is perfectly working as it is, but from
a subsystem maintainer point of view it is annoying if one driver
turns the concepts around and it gets hard to maintain.

Yours,
Linus Walleij

Re: [PATCH v2 1/9] pinctrl: mvebu: pinctrl driver core

From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: 2012-09-02 08:27:37

On 09/02/2012 09:30 AM, Linus Walleij wrote:
On Mon, Aug 27, 2012 at 6:33 AM, Stephen Warren[off-list ref]  wrote:
quoted
The pinctrl subsystem does expect a list of functions, and for each
function, a list of the groups where it can be selected. I admit that
when I think about this, it's slightly backward, since HW typically has
a list of pins/groups, and for each, a certain set of functions can be
selected. Oh well...
I agree that this is how we engineered it, would it create big hassles
for you to fix up the driver so it's the other way around Sebastian?

I understand that the driver is perfectly working as it is, but from
a subsystem maintainer point of view it is annoying if one driver
turns the concepts around and it gets hard to maintain.
Stephen, Linus, Jason,

there is a v3 of the patch under internal review right now.

I know Stephen will not like it, but I decided not to have the list of
functions passed statically from the SoC specific part but generate it
out of pingroups during probe().

As soon as I have confirmation that it still works on the other SoCs,
I will send the updated patches for public review.

Maybe Jason can also comment on what branch he wants to have it based
on, as we all agreed to get it through the Marvell tree.

Sebastian

Re: [PATCH v2 1/9] pinctrl: mvebu: pinctrl driver core

From: Linus Walleij <hidden>
Date: 2012-09-03 09:32:15

On Sun, Sep 2, 2012 at 10:27 AM, Sebastian Hesselbarth
[off-list ref] wrote:
there is a v3 of the patch under internal review right now.
OK I'll review as you send it out. Will look through the v2 patches to
see if I missed some comment.
I know Stephen will not like it, but I decided not to have the list of
functions passed statically from the SoC specific part but generate it
out of pingroups during probe().
Well, Tony's driver does even nastier things so we need to agree
to disagree on this point. I for one can live with it.

Yours,
Linus Walleij

Re: [PATCH v2 1/9] pinctrl: mvebu: pinctrl driver core

From: Jason Cooper <hidden>
Date: 2012-09-03 19:47:51

On Sun, Sep 02, 2012 at 10:27:29AM +0200, Sebastian Hesselbarth wrote:
Maybe Jason can also comment on what branch he wants to have it based
on, as we all agreed to get it through the Marvell tree.
Please base against:

git://git.infradead.org/users/jcooper/linux.git boards-for-v3.7-v2

thx,

Jason.

Re: [PATCH v2 1/9] pinctrl: mvebu: pinctrl driver core

From: Jason Cooper <hidden>
Date: 2012-09-10 00:41:45

On Sun, Sep 02, 2012 at 10:27:29AM +0200, Sebastian Hesselbarth wrote:
there is a v3 of the patch under internal review right now.
Sebastian,

What is the status of v3?  I'd like to get it (and gpio, which depends
on this work) in for v3.7, but it's getting close...

thx,

Jason.

[PATCH v3 0/9] pinctrl: mvebu: pinctrl driver

From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: 2012-09-10 08:40:08

This patch set adds a core pinctrl driver for Marvell MVEBU SoCs and
SoC specific stubs for Armada 370, Armada XP, Dove, and Kirkwood.
The SoC specific stubs use the pinctrl-mvebu core driver that handles
pinctrl API and register accesses for common pinctrl registers.

As especially Dove has some pinctrl registers that do not match the
common pinctrl register layout the core driver has been extended by
some callbacks to allow uncommon Dove pinctrl registers.

DT binding documentation is added for all supported SoCs but as
Dove and Kirkwood are not yet ready for full DT support, the pinctrl
driver is only activated for Armada 370 and XP.

The driver has been tested on Dove, 88f6281 variant of Kirkwood,
Armada 370, and XP.

Changelog:
v2:
- rebased on git://git.infradead.org/users/jcooper/linux.git boards-for-3.7
- removed arch/arm/*/Kconfig patches that enable PINCTRL_ on MACH_MVEBU
  (those will be sent as a different patch set)
- reworked patches wrt reviews from Andrew Lunn and Linus Walleij

v3:
- parse functions from SoC specific pin groups instead of DT node
- move kirkwood variants to DT match data
- respect Armada XP variant in DTs
- cleaned whitespaces in DTs
- rebased to jcooper/boards-for-v3.7-v2

Sebastian Hesselbarth (3):
  pinctrl: mvebu: pinctrl driver core
  pinctrl: mvebu: dove pinctrl driver
  pinctrl: mvebu: kirkwood pinctrl driver

Thomas Petazzoni (6):
  pinctrl: mvebu: add pinctrl driver for Armada 370
  pinctrl: mvebu: add pinctrl driver for Armada XP
  ARM: mvebu: add pinctrl device in DT for Armada 370/XP SoCs
  ARM: mvebu: Add pinctrl support to Armada XP SoCs
  ARM: mvebu: Add pinctrl support to Armada 370 SoC
  ARM: mvebu: adjust Armada XP evaluation board DTS

 .../pinctrl/marvell,armada-370-pinctrl.txt         |   95 +++
 .../bindings/pinctrl/marvell,armada-xp-pinctrl.txt |  100 +++
 .../bindings/pinctrl/marvell,dove-pinctrl.txt      |   72 ++
 .../bindings/pinctrl/marvell,kirkwood-pinctrl.txt  |  279 ++++++++
 .../bindings/pinctrl/marvell,mvebu-pinctrl.txt     |   45 ++
 arch/arm/Kconfig                                   |    1 +
 arch/arm/boot/dts/armada-370-xp.dtsi               |    7 +
 arch/arm/boot/dts/armada-370.dtsi                  |    4 +
 arch/arm/boot/dts/armada-xp-db.dts                 |    4 +-
 arch/arm/boot/dts/armada-xp-mv78230.dtsi           |   27 +
 arch/arm/boot/dts/armada-xp-mv78260.dtsi           |   27 +
 arch/arm/boot/dts/armada-xp-mv78460.dtsi           |   27 +
 drivers/pinctrl/Kconfig                            |   22 +
 drivers/pinctrl/Makefile                           |    5 +
 drivers/pinctrl/pinctrl-armada-370.c               |  421 ++++++++++++
 drivers/pinctrl/pinctrl-armada-xp.c                |  468 +++++++++++++
 drivers/pinctrl/pinctrl-dove.c                     |  622 +++++++++++++++++
 drivers/pinctrl/pinctrl-kirkwood.c                 |  473 +++++++++++++
 drivers/pinctrl/pinctrl-mvebu.c                    |  705 ++++++++++++++++++++
 drivers/pinctrl/pinctrl-mvebu.h                    |  192 ++++++
 20 files changed, 3594 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt
 create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt
 create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt
 create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt
 create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt
 create mode 100644 arch/arm/boot/dts/armada-xp-mv78230.dtsi
 create mode 100644 arch/arm/boot/dts/armada-xp-mv78260.dtsi
 create mode 100644 arch/arm/boot/dts/armada-xp-mv78460.dtsi
 create mode 100644 drivers/pinctrl/pinctrl-armada-370.c
 create mode 100644 drivers/pinctrl/pinctrl-armada-xp.c
 create mode 100644 drivers/pinctrl/pinctrl-dove.c
 create mode 100644 drivers/pinctrl/pinctrl-kirkwood.c
 create mode 100644 drivers/pinctrl/pinctrl-mvebu.c
 create mode 100644 drivers/pinctrl/pinctrl-mvebu.h
---
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Thomas Petazzoni <redacted>
Cc: Grant Likely <redacted>
Cc: Rob Herring <redacted>
Cc: Rob Landley <redacted>
Cc: Russell King <redacted>
Cc: Lior Amsalem <redacted>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Jason Cooper <redacted>
Cc: Gregory CLEMENT <redacted>
Cc: Ben Dooks <redacted>
Cc: Linus Walleij <redacted>
Cc: Stephen Warren <redacted>
Cc: devicetree-discuss at lists.ozlabs.org
Cc: linux-doc at vger.kernel.org
Cc: linux-kernel at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
-- 
1.7.10.4

[PATCH v3 4/9] pinctrl: mvebu: add pinctrl driver for Armada 370

From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: 2012-09-10 08:40:19

From: Thomas Petazzoni <redacted>

This pinctrl driver is not a full-blown pinctrl driver from scratch:
it relies on the common pinctrl-mvebu driver, which is used for all
Marvell EBU SoCs.

Signed-off-by: Thomas Petazzoni <redacted>
---
v2:
- removed arch/arm/*/Kconfig changes and added note about variant = 0

Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Thomas Petazzoni <redacted>
Cc: Grant Likely <redacted>
Cc: Rob Herring <redacted>
Cc: Rob Landley <redacted>
Cc: Russell King <redacted>
Cc: Lior Amsalem <redacted>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Jason Cooper <redacted>
Cc: Gregory CLEMENT <redacted>
Cc: Ben Dooks <redacted>
Cc: Linus Walleij <redacted>
Cc: Stephen Warren <redacted>
Cc: devicetree-discuss at lists.ozlabs.org
Cc: linux-doc at vger.kernel.org
Cc: linux-kernel at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
---
 .../pinctrl/marvell,armada-370-pinctrl.txt         |   95 +++++
 drivers/pinctrl/Kconfig                            |    4 +
 drivers/pinctrl/Makefile                           |    1 +
 drivers/pinctrl/pinctrl-armada-370.c               |  421 ++++++++++++++++++++
 4 files changed, 521 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt
 create mode 100644 drivers/pinctrl/pinctrl-armada-370.c
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt
new file mode 100644
index 0000000..01ef408
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt
@@ -0,0 +1,95 @@
+* Marvell Armada 370 SoC pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "marvell,88f6710-pinctrl"
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, uart0(rxd)
+mpp1          1        gpo, uart0(txd)
+mpp2          2        gpio, i2c0(sck), uart0(txd)
+mpp3          3        gpio, i2c0(sda), uart0(rxd)
+mpp4          4        gpio, cpu_pd(vdd)
+mpp5          5        gpo, ge0(txclko), uart1(txd), spi1(clk), audio(mclk)
+mpp6          6        gpio, ge0(txd0), sata0(prsnt), tdm(rst), audio(sdo)
+mpp7          7        gpo, ge0(txd1), tdm(tdx), audio(lrclk)
+mpp8          8        gpio, ge0(txd2), uart0(rts), tdm(drx), audio(bclk)
+mpp9          9        gpo, ge0(txd3), uart1(txd), sd0(clk), audio(spdifo)
+mpp10         10       gpio, ge0(txctl), uart0(cts), tdm(fsync), audio(sdi)
+mpp11         11       gpio, ge0(rxd0), uart1(rxd), sd0(cmd), spi0(cs1),
+                       sata1(prsnt), spi1(cs1)
+mpp12         12       gpio, ge0(rxd1), i2c1(sda), sd0(d0), spi1(cs0),
+                       audio(spdifi)
+mpp13         13       gpio, ge0(rxd2), i2c1(sck), sd0(d1), tdm(pclk),
+                       audio(rmclk)
+mpp14         14       gpio, ge0(rxd3), pcie(clkreq0), sd0(d2), spi1(mosi),
+                       spi0(cs2)
+mpp15         15       gpio, ge0(rxctl), pcie(clkreq1), sd0(d3), spi1(miso),
+                       spi0(cs3)
+mpp16         16       gpio, ge0(rxclk), uart1(rxd), tdm(int), audio(extclk)
+mpp17         17       gpo, ge(mdc)
+mpp18         18       gpio, ge(mdio)
+mpp19         19       gpio, ge0(txclk), ge1(txclkout), tdm(pclk)
+mpp20         20       gpo, ge0(txd4), ge1(txd0)
+mpp21         21       gpo, ge0(txd5), ge1(txd1), uart1(txd)
+mpp22         22       gpo, ge0(txd6), ge1(txd2), uart0(rts)
+mpp23         23       gpo, ge0(txd7), ge1(txd3), spi1(mosi)
+mpp24         24       gpio, ge0(col), ge1(txctl), spi1(cs0)
+mpp25         25       gpio, ge0(rxerr), ge1(rxd0), uart1(rxd)
+mpp26         26       gpio, ge0(crs), ge1(rxd1), spi1(miso)
+mpp27         27       gpio, ge0(rxd4), ge1(rxd2), uart0(cts)
+mpp28         28       gpio, ge0(rxd5), ge1(rxd3)
+mpp29         29       gpio, ge0(rxd6), ge1(rxctl), i2c1(sda)
+mpp30         30       gpio, ge0(rxd7), ge1(rxclk), i2c1(sck)
+mpp31         31       gpio, tclk, ge0(txerr)
+mpp32         32       gpio, spi0(cs0)
+mpp33         33       gpio, dev(bootcs), spi0(cs0)
+mpp34         34       gpo, dev(wen0), spi0(mosi)
+mpp35         35       gpo, dev(oen), spi0(sck)
+mpp36         36       gpo, dev(a1), spi0(miso)
+mpp37         37       gpo, dev(a0), sata0(prsnt)
+mpp38         38       gpio, dev(ready), uart1(cts), uart0(cts)
+mpp39         39       gpo, dev(ad0), audio(spdifo)
+mpp40         40       gpio, dev(ad1), uart1(rts), uart0(rts)
+mpp41         41       gpio, dev(ad2), uart1(rxd)
+mpp42         42       gpo, dev(ad3), uart1(txd)
+mpp43         43       gpo, dev(ad4), audio(bclk)
+mpp44         44       gpo, dev(ad5), audio(mclk)
+mpp45         45       gpo, dev(ad6), audio(lrclk)
+mpp46         46       gpo, dev(ad7), audio(sdo)
+mpp47         47       gpo, dev(ad8), sd0(clk), audio(spdifo)
+mpp48         48       gpio, dev(ad9), uart0(rts), sd0(cmd), sata1(prsnt),
+                       spi0(cs1)
+mpp49         49       gpio, dev(ad10), pcie(clkreq1), sd0(d0), spi1(cs0),
+                       audio(spdifi)
+mpp50         50       gpio, dev(ad11), uart0(cts), sd0(d1), spi1(miso),
+                       audio(rmclk)
+mpp51         51       gpio, dev(ad12), i2c1(sda), sd0(d2), spi1(mosi)
+mpp52         52       gpio, dev(ad13), i2c1(sck), sd0(d3), spi1(sck)
+mpp53         53       gpio, dev(ad14), sd0(clk), tdm(pclk), spi0(cs2),
+                       pcie(clkreq1)
+mpp54         54       gpo, dev(ad15), tdm(dtx)
+mpp55         55       gpio, dev(cs1), uart1(txd), tdm(rst), sata1(prsnt),
+                       sata0(prsnt)
+mpp56         56       gpio, dev(cs2), uart1(cts), uart0(cts), spi0(cs3),
+                       pcie(clkreq0), spi1(cs1)
+mpp57         57       gpio, dev(cs3), uart1(rxd), tdm(fsync), sata0(prsnt),
+                       audio(sdo)
+mpp58         58       gpio, dev(cs0), uart1(rts), tdm(int), audio(extclk),
+                       uart0(rts)
+mpp59         59       gpo, dev(ale0), uart1(rts), uart0(rts), audio(bclk)
+mpp60         60       gpio, dev(ale1), uart1(rxd), sata0(prsnt), pcie(rst-out),
+                       audio(sdi)
+mpp61         61       gpo, dev(wen1), uart1(txd), audio(rclk)
+mpp62         62       gpio, dev(a2), uart1(cts), tdm(drx), pcie(clkreq0),
+                       audio(mclk), uart0(cts)
+mpp63         63       gpo, spi0(sck), tclk
+mpp64         64       gpio, spi0(miso), spi0-1(cs1)
+mpp65         65       gpio, spi0(mosi), spi0-1(cs2)
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 31c0bba..e16b8b0 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -159,6 +159,10 @@ config PINCTRL_KIRKWOOD
 	bool
 	select PINCTRL_MVEBU
 
+config PINCTRL_ARMADA_370
+	bool
+	select PINCTRL_MVEBU
+
 source "drivers/pinctrl/spear/Kconfig"
 
 endmenu
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 3006294..e6d6667 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -32,5 +32,6 @@ obj-$(CONFIG_PINCTRL_COH901)	+= pinctrl-coh901.o
 obj-$(CONFIG_PINCTRL_MVEBU)	+= pinctrl-mvebu.o
 obj-$(CONFIG_PINCTRL_DOVE)	+= pinctrl-dove.o
 obj-$(CONFIG_PINCTRL_KIRKWOOD)	+= pinctrl-kirkwood.o
+obj-$(CONFIG_PINCTRL_ARMADA_370) += pinctrl-armada-370.o
 
 obj-$(CONFIG_PLAT_SPEAR)	+= spear/
diff --git a/drivers/pinctrl/pinctrl-armada-370.c b/drivers/pinctrl/pinctrl-armada-370.c
new file mode 100644
index 0000000..c907647
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-armada-370.c
@@ -0,0 +1,421 @@
+/*
+ * Marvell Armada 370 pinctrl driver based on mvebu pinctrl core
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-mvebu.h"
+
+static struct mvebu_mpp_mode mv88f6710_mpp_modes[] = {
+	MPP_MODE(0,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "uart0", "rxd")),
+	MPP_MODE(1,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "uart0", "txd")),
+	MPP_MODE(2,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "i2c0", "sck"),
+	   MPP_FUNCTION(0x2, "uart0", "txd")),
+	MPP_MODE(3,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "i2c0", "sda"),
+	   MPP_FUNCTION(0x2, "uart0", "rxd")),
+	MPP_MODE(4,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "cpu_pd", "vdd")),
+	MPP_MODE(5,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "txclko"),
+	   MPP_FUNCTION(0x2, "uart1", "txd"),
+	   MPP_FUNCTION(0x4, "spi1", "clk"),
+	   MPP_FUNCTION(0x5, "audio", "mclk")),
+	MPP_MODE(6,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "txd0"),
+	   MPP_FUNCTION(0x2, "sata0", "prsnt"),
+	   MPP_FUNCTION(0x4, "tdm", "rst"),
+	   MPP_FUNCTION(0x5, "audio", "sdo")),
+	MPP_MODE(7,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "txd1"),
+	   MPP_FUNCTION(0x4, "tdm", "tdx"),
+	   MPP_FUNCTION(0x5, "audio", "lrclk")),
+	MPP_MODE(8,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "txd2"),
+	   MPP_FUNCTION(0x2, "uart0", "rts"),
+	   MPP_FUNCTION(0x4, "tdm", "drx"),
+	   MPP_FUNCTION(0x5, "audio", "bclk")),
+	MPP_MODE(9,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "txd3"),
+	   MPP_FUNCTION(0x2, "uart1", "txd"),
+	   MPP_FUNCTION(0x3, "sd0", "clk"),
+	   MPP_FUNCTION(0x5, "audio", "spdifo")),
+	MPP_MODE(10,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "txctl"),
+	   MPP_FUNCTION(0x2, "uart0", "cts"),
+	   MPP_FUNCTION(0x4, "tdm", "fsync"),
+	   MPP_FUNCTION(0x5, "audio", "sdi")),
+	MPP_MODE(11,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "rxd0"),
+	   MPP_FUNCTION(0x2, "uart1", "rxd"),
+	   MPP_FUNCTION(0x3, "sd0", "cmd"),
+	   MPP_FUNCTION(0x4, "spi0", "cs1"),
+	   MPP_FUNCTION(0x5, "sata1", "prsnt"),
+	   MPP_FUNCTION(0x6, "spi1", "cs1")),
+	MPP_MODE(12,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "rxd1"),
+	   MPP_FUNCTION(0x2, "i2c1", "sda"),
+	   MPP_FUNCTION(0x3, "sd0", "d0"),
+	   MPP_FUNCTION(0x4, "spi1", "cs0"),
+	   MPP_FUNCTION(0x5, "audio", "spdifi")),
+	MPP_MODE(13,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "rxd2"),
+	   MPP_FUNCTION(0x2, "i2c1", "sck"),
+	   MPP_FUNCTION(0x3, "sd0", "d1"),
+	   MPP_FUNCTION(0x4, "tdm", "pclk"),
+	   MPP_FUNCTION(0x5, "audio", "rmclk")),
+	MPP_MODE(14,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "rxd3"),
+	   MPP_FUNCTION(0x2, "pcie", "clkreq0"),
+	   MPP_FUNCTION(0x3, "sd0", "d2"),
+	   MPP_FUNCTION(0x4, "spi1", "mosi"),
+	   MPP_FUNCTION(0x5, "spi0", "cs2")),
+	MPP_MODE(15,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "rxctl"),
+	   MPP_FUNCTION(0x2, "pcie", "clkreq1"),
+	   MPP_FUNCTION(0x3, "sd0", "d3"),
+	   MPP_FUNCTION(0x4, "spi1", "miso"),
+	   MPP_FUNCTION(0x5, "spi0", "cs3")),
+	MPP_MODE(16,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "rxclk"),
+	   MPP_FUNCTION(0x2, "uart1", "rxd"),
+	   MPP_FUNCTION(0x4, "tdm", "int"),
+	   MPP_FUNCTION(0x5, "audio", "extclk")),
+	MPP_MODE(17,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "ge", "mdc")),
+	MPP_MODE(18,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge", "mdio")),
+	MPP_MODE(19,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "txclk"),
+	   MPP_FUNCTION(0x2, "ge1", "txclkout"),
+	   MPP_FUNCTION(0x4, "tdm", "pclk")),
+	MPP_MODE(20,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "txd4"),
+	   MPP_FUNCTION(0x2, "ge1", "txd0")),
+	MPP_MODE(21,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "txd5"),
+	   MPP_FUNCTION(0x2, "ge1", "txd1"),
+	   MPP_FUNCTION(0x4, "uart1", "txd")),
+	MPP_MODE(22,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "txd6"),
+	   MPP_FUNCTION(0x2, "ge1", "txd2"),
+	   MPP_FUNCTION(0x4, "uart0", "rts")),
+	MPP_MODE(23,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "txd7"),
+	   MPP_FUNCTION(0x2, "ge1", "txd3"),
+	   MPP_FUNCTION(0x4, "spi1", "mosi")),
+	MPP_MODE(24,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "col"),
+	   MPP_FUNCTION(0x2, "ge1", "txctl"),
+	   MPP_FUNCTION(0x4, "spi1", "cs0")),
+	MPP_MODE(25,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "rxerr"),
+	   MPP_FUNCTION(0x2, "ge1", "rxd0"),
+	   MPP_FUNCTION(0x4, "uart1", "rxd")),
+	MPP_MODE(26,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "crs"),
+	   MPP_FUNCTION(0x2, "ge1", "rxd1"),
+	   MPP_FUNCTION(0x4, "spi1", "miso")),
+	MPP_MODE(27,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "rxd4"),
+	   MPP_FUNCTION(0x2, "ge1", "rxd2"),
+	   MPP_FUNCTION(0x4, "uart0", "cts")),
+	MPP_MODE(28,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "rxd5"),
+	   MPP_FUNCTION(0x2, "ge1", "rxd3")),
+	MPP_MODE(29,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "rxd6"),
+	   MPP_FUNCTION(0x2, "ge1", "rxctl"),
+	   MPP_FUNCTION(0x4, "i2c1", "sda")),
+	MPP_MODE(30,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "ge0", "rxd7"),
+	   MPP_FUNCTION(0x2, "ge1", "rxclk"),
+	   MPP_FUNCTION(0x4, "i2c1", "sck")),
+	MPP_MODE(31,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x3, "tclk", NULL),
+	   MPP_FUNCTION(0x4, "ge0", "txerr")),
+	MPP_MODE(32,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "spi0", "cs0")),
+	MPP_MODE(33,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "bootcs"),
+	   MPP_FUNCTION(0x2, "spi0", "cs0")),
+	MPP_MODE(34,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "dev", "wen0"),
+	   MPP_FUNCTION(0x2, "spi0", "mosi")),
+	MPP_MODE(35,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "dev", "oen"),
+	   MPP_FUNCTION(0x2, "spi0", "sck")),
+	MPP_MODE(36,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "dev", "a1"),
+	   MPP_FUNCTION(0x2, "spi0", "miso")),
+	MPP_MODE(37,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "dev", "a0"),
+	   MPP_FUNCTION(0x2, "sata0", "prsnt")),
+	MPP_MODE(38,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ready"),
+	   MPP_FUNCTION(0x2, "uart1", "cts"),
+	   MPP_FUNCTION(0x3, "uart0", "cts")),
+	MPP_MODE(39,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad0"),
+	   MPP_FUNCTION(0x2, "audio", "spdifo")),
+	MPP_MODE(40,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad1"),
+	   MPP_FUNCTION(0x2, "uart1", "rts"),
+	   MPP_FUNCTION(0x3, "uart0", "rts")),
+	MPP_MODE(41,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad2"),
+	   MPP_FUNCTION(0x2, "uart1", "rxd")),
+	MPP_MODE(42,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad3"),
+	   MPP_FUNCTION(0x2, "uart1", "txd")),
+	MPP_MODE(43,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad4"),
+	   MPP_FUNCTION(0x2, "audio", "bclk")),
+	MPP_MODE(44,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad5"),
+	   MPP_FUNCTION(0x2, "audio", "mclk")),
+	MPP_MODE(45,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad6"),
+	   MPP_FUNCTION(0x2, "audio", "lrclk")),
+	MPP_MODE(46,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad7"),
+	   MPP_FUNCTION(0x2, "audio", "sdo")),
+	MPP_MODE(47,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad8"),
+	   MPP_FUNCTION(0x3, "sd0", "clk"),
+	   MPP_FUNCTION(0x5, "audio", "spdifo")),
+	MPP_MODE(48,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad9"),
+	   MPP_FUNCTION(0x2, "uart0", "rts"),
+	   MPP_FUNCTION(0x3, "sd0", "cmd"),
+	   MPP_FUNCTION(0x4, "sata1", "prsnt"),
+	   MPP_FUNCTION(0x5, "spi0", "cs1")),
+	MPP_MODE(49,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad10"),
+	   MPP_FUNCTION(0x2, "pcie", "clkreq1"),
+	   MPP_FUNCTION(0x3, "sd0", "d0"),
+	   MPP_FUNCTION(0x4, "spi1", "cs0"),
+	   MPP_FUNCTION(0x5, "audio", "spdifi")),
+	MPP_MODE(50,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad11"),
+	   MPP_FUNCTION(0x2, "uart0", "cts"),
+	   MPP_FUNCTION(0x3, "sd0", "d1"),
+	   MPP_FUNCTION(0x4, "spi1", "miso"),
+	   MPP_FUNCTION(0x5, "audio", "rmclk")),
+	MPP_MODE(51,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad12"),
+	   MPP_FUNCTION(0x2, "i2c1", "sda"),
+	   MPP_FUNCTION(0x3, "sd0", "d2"),
+	   MPP_FUNCTION(0x4, "spi1", "mosi")),
+	MPP_MODE(52,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad13"),
+	   MPP_FUNCTION(0x2, "i2c1", "sck"),
+	   MPP_FUNCTION(0x3, "sd0", "d3"),
+	   MPP_FUNCTION(0x4, "spi1", "sck")),
+	MPP_MODE(53,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad14"),
+	   MPP_FUNCTION(0x2, "sd0", "clk"),
+	   MPP_FUNCTION(0x3, "tdm", "pclk"),
+	   MPP_FUNCTION(0x4, "spi0", "cs2"),
+	   MPP_FUNCTION(0x5, "pcie", "clkreq1")),
+	MPP_MODE(54,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ad15"),
+	   MPP_FUNCTION(0x3, "tdm", "dtx")),
+	MPP_MODE(55,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "cs1"),
+	   MPP_FUNCTION(0x2, "uart1", "txd"),
+	   MPP_FUNCTION(0x3, "tdm", "rst"),
+	   MPP_FUNCTION(0x4, "sata1", "prsnt"),
+	   MPP_FUNCTION(0x5, "sata0", "prsnt")),
+	MPP_MODE(56,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "cs2"),
+	   MPP_FUNCTION(0x2, "uart1", "cts"),
+	   MPP_FUNCTION(0x3, "uart0", "cts"),
+	   MPP_FUNCTION(0x4, "spi0", "cs3"),
+	   MPP_FUNCTION(0x5, "pcie", "clkreq0"),
+	   MPP_FUNCTION(0x6, "spi1", "cs1")),
+	MPP_MODE(57,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "cs3"),
+	   MPP_FUNCTION(0x2, "uart1", "rxd"),
+	   MPP_FUNCTION(0x3, "tdm", "fsync"),
+	   MPP_FUNCTION(0x4, "sata0", "prsnt"),
+	   MPP_FUNCTION(0x5, "audio", "sdo")),
+	MPP_MODE(58,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "cs0"),
+	   MPP_FUNCTION(0x2, "uart1", "rts"),
+	   MPP_FUNCTION(0x3, "tdm", "int"),
+	   MPP_FUNCTION(0x5, "audio", "extclk"),
+	   MPP_FUNCTION(0x6, "uart0", "rts")),
+	MPP_MODE(59,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ale0"),
+	   MPP_FUNCTION(0x2, "uart1", "rts"),
+	   MPP_FUNCTION(0x3, "uart0", "rts"),
+	   MPP_FUNCTION(0x5, "audio", "bclk")),
+	MPP_MODE(60,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "ale1"),
+	   MPP_FUNCTION(0x2, "uart1", "rxd"),
+	   MPP_FUNCTION(0x3, "sata0", "prsnt"),
+	   MPP_FUNCTION(0x4, "pcie", "rst-out"),
+	   MPP_FUNCTION(0x5, "audio", "sdi")),
+	MPP_MODE(61,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "dev", "wen1"),
+	   MPP_FUNCTION(0x2, "uart1", "txd"),
+	   MPP_FUNCTION(0x5, "audio", "rclk")),
+	MPP_MODE(62,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "dev", "a2"),
+	   MPP_FUNCTION(0x2, "uart1", "cts"),
+	   MPP_FUNCTION(0x3, "tdm", "drx"),
+	   MPP_FUNCTION(0x4, "pcie", "clkreq0"),
+	   MPP_FUNCTION(0x5, "audio", "mclk"),
+	   MPP_FUNCTION(0x6, "uart0", "cts")),
+	MPP_MODE(63,
+	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x1, "spi0", "sck"),
+	   MPP_FUNCTION(0x2, "tclk", NULL)),
+	MPP_MODE(64,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "spi0", "miso"),
+	   MPP_FUNCTION(0x2, "spi0-1", "cs1")),
+	MPP_MODE(65,
+	   MPP_FUNCTION(0x0, "gpio", NULL),
+	   MPP_FUNCTION(0x1, "spi0", "mosi"),
+	   MPP_FUNCTION(0x2, "spi0-1", "cs2")),
+};
+
+static struct mvebu_pinctrl_soc_info armada_370_pinctrl_info;
+
+static struct of_device_id armada_370_pinctrl_of_match[] __devinitdata = {
+	{ .compatible = "marvell,mv88f6710-pinctrl" },
+	{ },
+};
+
+static struct mvebu_mpp_ctrl mv88f6710_mpp_controls[] = {
+	MPP_REG_CTRL(0, 65),
+};
+
+static struct pinctrl_gpio_range mv88f6710_mpp_gpio_ranges[] = {
+	MPP_GPIO_RANGE(0,   0,  0, 32),
+	MPP_GPIO_RANGE(1,  32, 32, 32),
+	MPP_GPIO_RANGE(2,  64, 64,  2),
+};
+
+static int __devinit armada_370_pinctrl_probe(struct platform_device *pdev)
+{
+	struct mvebu_pinctrl_soc_info *soc = &armada_370_pinctrl_info;
+
+	soc->variant = 0; /* no variants for Armada 370 */
+	soc->controls = mv88f6710_mpp_controls;
+	soc->ncontrols = ARRAY_SIZE(mv88f6710_mpp_controls);
+	soc->modes = mv88f6710_mpp_modes;
+	soc->nmodes = ARRAY_SIZE(mv88f6710_mpp_modes);
+	soc->gpioranges = mv88f6710_mpp_gpio_ranges;
+	soc->ngpioranges = ARRAY_SIZE(mv88f6710_mpp_gpio_ranges);
+
+	pdev->dev.platform_data = soc;
+
+	return mvebu_pinctrl_probe(pdev);
+}
+
+static int __devexit armada_370_pinctrl_remove(struct platform_device *pdev)
+{
+	return mvebu_pinctrl_remove(pdev);
+}
+
+static struct platform_driver armada_370_pinctrl_driver = {
+	.driver = {
+		.name = "armada-370-pinctrl",
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(armada_370_pinctrl_of_match),
+	},
+	.probe = armada_370_pinctrl_probe,
+	.remove = __devexit_p(armada_370_pinctrl_remove),
+};
+
+module_platform_driver(armada_370_pinctrl_driver);
+
+MODULE_AUTHOR("Thomas Petazzoni <thomas.petazzoni@free-electrons.com>");
+MODULE_DESCRIPTION("Marvell Armada 370 pinctrl driver");
+MODULE_LICENSE("GPL v2");
-- 
1.7.10.4

[PATCH v3 3/9] pinctrl: mvebu: kirkwood pinctrl driver

From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: 2012-09-10 08:40:22

This patch adds a SoC specific pinctrl driver for Marvell Kirkwood SoCs
plus DT binding documentation. This driver will use the mvebu pinctrl
driver core.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
v2:
- restructured pinctrl/Kconfig to hide pinctrl driver as it will be
  always selected by arch/arm/mach-mvebu/Kconfig
- use enum for kirkwood variants instead of defines

v3:
- moved variant specific data to DT match struct

Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Thomas Petazzoni <redacted>
Cc: Grant Likely <redacted>
Cc: Rob Herring <redacted>
Cc: Rob Landley <redacted>
Cc: Russell King <redacted>
Cc: Lior Amsalem <redacted>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Jason Cooper <redacted>
Cc: Gregory CLEMENT <redacted>
Cc: Ben Dooks <redacted>
Cc: Linus Walleij <redacted>
Cc: Stephen Warren <redacted>
Cc: devicetree-discuss at lists.ozlabs.org
Cc: linux-doc at vger.kernel.org
Cc: linux-kernel at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
---
 .../bindings/pinctrl/marvell,kirkwood-pinctrl.txt  |  279 ++++++++++++
 drivers/pinctrl/Kconfig                            |    4 +
 drivers/pinctrl/Makefile                           |    1 +
 drivers/pinctrl/pinctrl-kirkwood.c                 |  473 ++++++++++++++++++++
 4 files changed, 757 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt
 create mode 100644 drivers/pinctrl/pinctrl-kirkwood.c
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt
new file mode 100644
index 0000000..361bccb
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt
@@ -0,0 +1,279 @@
+* Marvell Kirkwood SoC pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "marvell,88f6180-pinctrl",
+              "marvell,88f6190-pinctrl", "marvell,88f6192-pinctrl",
+              "marvell,88f6281-pinctrl", "marvell,88f6282-pinctrl"
+
+This driver supports all kirkwood variants, i.e. 88f6180, 88f619x, and 88f628x.
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+* Marvell Kirkwood 88f6180
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, nand(io2), spi(cs)
+mpp1          1        gpo, nand(io3), spi(mosi)
+mpp2          2        gpo, nand(io4), spi(sck)
+mpp3          3        gpo, nand(io5), spi(miso)
+mpp4          4        gpio, nand(io6), uart0(rxd), ptp(clk)
+mpp5          5        gpo, nand(io7), uart0(txd), ptp(trig)
+mpp6          6        sysrst(out), spi(mosi), ptp(trig)
+mpp7          7        gpo, pex(rsto), spi(cs), ptp(trig)
+mpp8          8        gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk),
+                       mii(col)
+mpp9          9        gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq),
+                       mii(crs)
+mpp10         10       gpo, spi(sck), uart0(txd), ptp(trig)
+mpp11         11       gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq),
+                       ptp-2(trig)
+mpp12         12       gpo, sdio(clk)
+mpp13         13       gpio, sdio(cmd), uart1(txd)
+mpp14         14       gpio, sdio(d0), uart1(rxd), mii(col)
+mpp15         15       gpio, sdio(d1), uart0(rts), uart1(txd)
+mpp16         16       gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs)
+mpp17         17       gpio, sdio(d3)
+mpp18         18       gpo, nand(io0)
+mpp19         19       gpo, nand(io1)
+mpp20         20       gpio, mii(rxerr)
+mpp21         21       gpio, audio(spdifi)
+mpp22         22       gpio, audio(spdifo)
+mpp23         23       gpio, audio(rmclk)
+mpp24         24       gpio, audio(bclk)
+mpp25         25       gpio, audio(sdo)
+mpp26         26       gpio, audio(lrclk)
+mpp27         27       gpio, audio(mclk)
+mpp28         28       gpio, audio(sdi)
+mpp29         29       gpio, audio(extclk)
+
+* Marvell Kirkwood 88f6190
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, nand(io2), spi(cs)
+mpp1          1        gpo, nand(io3), spi(mosi)
+mpp2          2        gpo, nand(io4), spi(sck)
+mpp3          3        gpo, nand(io5), spi(miso)
+mpp4          4        gpio, nand(io6), uart0(rxd), ptp(clk)
+mpp5          5        gpo, nand(io7), uart0(txd), ptp(trig), sata0(act)
+mpp6          6        sysrst(out), spi(mosi), ptp(trig)
+mpp7          7        gpo, pex(rsto), spi(cs), ptp(trig)
+mpp8          8        gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk),
+                       mii(col), mii-1(rxerr)
+mpp9          9        gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq),
+                       mii(crs), sata0(prsnt)
+mpp10         10       gpo, spi(sck), uart0(txd), ptp(trig)
+mpp11         11       gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq),
+                       ptp-2(trig), sata0(act)
+mpp12         12       gpo, sdio(clk)
+mpp13         13       gpio, sdio(cmd), uart1(txd)
+mpp14         14       gpio, sdio(d0), uart1(rxd), mii(col)
+mpp15         15       gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act)
+mpp16         16       gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs)
+mpp17         17       gpio, sdio(d3), sata0(prsnt)
+mpp18         18       gpo, nand(io0)
+mpp19         19       gpo, nand(io1)
+mpp20         20       gpio, ge1(txd0)
+mpp21         21       gpio, ge1(txd1), sata0(act)
+mpp22         22       gpio, ge1(txd2)
+mpp23         23       gpio, ge1(txd3), sata0(prsnt)
+mpp24         24       gpio, ge1(rxd0)
+mpp25         25       gpio, ge1(rxd1)
+mpp26         26       gpio, ge1(rxd2)
+mpp27         27       gpio, ge1(rxd3)
+mpp28         28       gpio, ge1(col)
+mpp29         29       gpio, ge1(txclk)
+mpp30         30       gpio, ge1(rxclk)
+mpp31         31       gpio, ge1(rxclk)
+mpp32         32       gpio, ge1(txclko)
+mpp33         33       gpo, ge1(txclk)
+mpp34         34       gpio, ge1(txen)
+mpp35         35       gpio, ge1(rxerr), sata0(act), mii(rxerr)
+
+* Marvell Kirkwood 88f6192
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, nand(io2), spi(cs)
+mpp1          1        gpo, nand(io3), spi(mosi)
+mpp2          2        gpo, nand(io4), spi(sck)
+mpp3          3        gpo, nand(io5), spi(miso)
+mpp4          4        gpio, nand(io6), uart0(rxd), ptp(clk), sata1(act)
+mpp5          5        gpo, nand(io7), uart0(txd), ptp(trig), sata0(act)
+mpp6          6        sysrst(out), spi(mosi), ptp(trig)
+mpp7          7        gpo, pex(rsto), spi(cs), ptp(trig)
+mpp8          8        gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk),
+                       mii(col), mii-1(rxerr), sata1(prsnt)
+mpp9          9        gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq),
+                       mii(crs), sata0(prsnt)
+mpp10         10       gpo, spi(sck), uart0(txd), ptp(trig), sata1(act)
+mpp11         11       gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq),
+                       ptp-2(trig), sata0(act)
+mpp12         12       gpo, sdio(clk)
+mpp13         13       gpio, sdio(cmd), uart1(txd)
+mpp14         14       gpio, sdio(d0), uart1(rxd), mii(col), sata1(prsnt)
+mpp15         15       gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act)
+mpp16         16       gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs),
+                       sata1(act)
+mpp17         17       gpio, sdio(d3), sata0(prsnt)
+mpp18         18       gpo, nand(io0)
+mpp19         19       gpo, nand(io1)
+mpp20         20       gpio, ge1(txd0), ts(mp0), tdm(tx0ql), audio(spdifi),
+                       sata1(act)
+mpp21         21       gpio, ge1(txd1), sata0(act), ts(mp1), tdm(rx0ql),
+                       audio(spdifo)
+mpp22         22       gpio, ge1(txd2), ts(mp2), tdm(tx2ql), audio(rmclk),
+                       sata1(prsnt)
+mpp23         23       gpio, ge1(txd3), sata0(prsnt), ts(mp3), tdm(rx2ql),
+                       audio(bclk)
+mpp24         24       gpio, ge1(rxd0), ts(mp4), tdm(spi-cs0), audio(sdo)
+mpp25         25       gpio, ge1(rxd1), ts(mp5), tdm(spi-sck), audio(lrclk)
+mpp26         26       gpio, ge1(rxd2), ts(mp6), tdm(spi-miso), audio(mclk)
+mpp27         27       gpio, ge1(rxd3), ts(mp7), tdm(spi-mosi), audio(sdi)
+mpp28         28       gpio, ge1(col), ts(mp8), tdm(int), audio(extclk)
+mpp29         29       gpio, ge1(txclk), ts(mp9), tdm(rst)
+mpp30         30       gpio, ge1(rxclk), ts(mp10), tdm(pclk)
+mpp31         31       gpio, ge1(rxclk), ts(mp11), tdm(fs)
+mpp32         32       gpio, ge1(txclko), ts(mp12), tdm(drx)
+mpp33         33       gpo, ge1(txclk), tdm(drx)
+mpp34         34       gpio, ge1(txen), tdm(spi-cs1)
+mpp35         35       gpio, ge1(rxerr), sata0(act), mii(rxerr), tdm(tx0ql)
+
+* Marvell Kirkwood 88f6281
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, nand(io2), spi(cs)
+mpp1          1        gpo, nand(io3), spi(mosi)
+mpp2          2        gpo, nand(io4), spi(sck)
+mpp3          3        gpo, nand(io5), spi(miso)
+mpp4          4        gpio, nand(io6), uart0(rxd), ptp(clk), sata1(act)
+mpp5          5        gpo, nand(io7), uart0(txd), ptp(trig), sata0(act)
+mpp6          6        sysrst(out), spi(mosi), ptp(trig)
+mpp7          7        gpo, pex(rsto), spi(cs), ptp(trig)
+mpp8          8        gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk),
+                       mii(col), mii-1(rxerr), sata1(prsnt)
+mpp9          9        gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq),
+                       mii(crs), sata0(prsnt)
+mpp10         10       gpo, spi(sck), uart0(txd), ptp(trig), sata1(act)
+mpp11         11       gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq),
+                       ptp-2(trig), sata0(act)
+mpp12         12       gpio, sdio(clk)
+mpp13         13       gpio, sdio(cmd), uart1(txd)
+mpp14         14       gpio, sdio(d0), uart1(rxd), mii(col), sata1(prsnt)
+mpp15         15       gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act)
+mpp16         16       gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs),
+                       sata1(act)
+mpp17         17       gpio, sdio(d3), sata0(prsnt)
+mpp18         18       gpo, nand(io0)
+mpp19         19       gpo, nand(io1)
+mpp20         20       gpio, ge1(txd0), ts(mp0), tdm(tx0ql), audio(spdifi),
+                       sata1(act)
+mpp21         21       gpio, ge1(txd1), sata0(act), ts(mp1), tdm(rx0ql),
+                       audio(spdifo)
+mpp22         22       gpio, ge1(txd2), ts(mp2), tdm(tx2ql), audio(rmclk),
+                       sata1(prsnt)
+mpp23         23       gpio, ge1(txd3), sata0(prsnt), ts(mp3), tdm(rx2ql),
+                       audio(bclk)
+mpp24         24       gpio, ge1(rxd0), ts(mp4), tdm(spi-cs0), audio(sdo)
+mpp25         25       gpio, ge1(rxd1), ts(mp5), tdm(spi-sck), audio(lrclk)
+mpp26         26       gpio, ge1(rxd2), ts(mp6), tdm(spi-miso), audio(mclk)
+mpp27         27       gpio, ge1(rxd3), ts(mp7), tdm(spi-mosi), audio(sdi)
+mpp28         28       gpio, ge1(col), ts(mp8), tdm(int), audio(extclk)
+mpp29         29       gpio, ge1(txclk), ts(mp9), tdm(rst)
+mpp30         30       gpio, ge1(rxclk), ts(mp10), tdm(pclk)
+mpp31         31       gpio, ge1(rxclk), ts(mp11), tdm(fs)
+mpp32         32       gpio, ge1(txclko), ts(mp12), tdm(drx)
+mpp33         33       gpo, ge1(txclk), tdm(drx)
+mpp34         34       gpio, ge1(txen), tdm(spi-cs1), sata1(act)
+mpp35         35       gpio, ge1(rxerr), sata0(act), mii(rxerr), tdm(tx0ql)
+mpp36         36       gpio, ts(mp0), tdm(spi-cs1), audio(spdifi)
+mpp37         37       gpio, ts(mp1), tdm(tx2ql), audio(spdifo)
+mpp38         38       gpio, ts(mp2), tdm(rx2ql), audio(rmclk)
+mpp39         39       gpio, ts(mp3), tdm(spi-cs0), audio(bclk)
+mpp40         40       gpio, ts(mp4), tdm(spi-sck), audio(sdo)
+mpp41         41       gpio, ts(mp5), tdm(spi-miso), audio(lrclk)
+mpp42         42       gpio, ts(mp6), tdm(spi-mosi), audio(mclk)
+mpp43         43       gpio, ts(mp7), tdm(int), audio(sdi)
+mpp44         44       gpio, ts(mp8), tdm(rst), audio(extclk)
+mpp45         45       gpio, ts(mp9), tdm(pclk)
+mpp46         46       gpio, ts(mp10), tdm(fs)
+mpp47         47       gpio, ts(mp11), tdm(drx)
+mpp48         48       gpio, ts(mp12), tdm(dtx)
+mpp49         49       gpio, ts(mp9), tdm(rx0ql), ptp(clk)
+
+* Marvell Kirkwood 88f6282
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, nand(io2), spi(cs)
+mpp1          1        gpo, nand(io3), spi(mosi)
+mpp2          2        gpo, nand(io4), spi(sck)
+mpp3          3        gpo, nand(io5), spi(miso)
+mpp4          4        gpio, nand(io6), uart0(rxd), sata1(act), lcd(hsync)
+mpp5          5        gpo, nand(io7), uart0(txd), sata0(act), lcd(vsync)
+mpp6          6        sysrst(out), spi(mosi)
+mpp7          7        gpo, spi(cs), lcd(pwm)
+mpp8          8        gpio, twsi0(sda), uart0(rts), uart1(rts), mii(col),
+                       mii-1(rxerr), sata1(prsnt)
+mpp9          9        gpio, twsi(sck), uart0(cts), uart1(cts), mii(crs),
+                       sata0(prsnt)
+mpp10         10       gpo, spi(sck), uart0(txd), sata1(act)
+mpp11         11       gpio, spi(miso), uart0(rxd), sata0(act)
+mpp12         12       gpo, sdio(clk), audio(spdifo), spi(mosi), twsi(sda)
+mpp13         13       gpio, sdio(cmd), uart1(txd), audio(rmclk), lcd(pwm)
+mpp14         14       gpio, sdio(d0), uart1(rxd), mii(col), sata1(prsnt),
+                       audio(spdifi), audio-1(sdi)
+mpp15         15       gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act),
+                       spi(cs)
+mpp16         16       gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs),
+                       sata1(act), lcd(extclk)
+mpp17         17       gpio, sdio(d3), sata0(prsnt), sata1(act), twsi1(sck)
+mpp18         18       gpo, nand(io0), pex(clkreq)
+mpp19         19       gpo, nand(io1)
+mpp20         20       gpio, ge1(txd0), ts(mp0), tdm(tx0ql), audio(spdifi),
+                       sata1(act), lcd(d0)
+mpp21         21       gpio, ge1(txd1), sata0(act), ts(mp1), tdm(rx0ql),
+                       audio(spdifo), lcd(d1)
+mpp22         22       gpio, ge1(txd2), ts(mp2), tdm(tx2ql), audio(rmclk),
+                       sata1(prsnt), lcd(d2)
+mpp23         23       gpio, ge1(txd3), sata0(prsnt), ts(mp3), tdm(rx2ql),
+                       audio(bclk), lcd(d3)
+mpp24         24       gpio, ge1(rxd0), ts(mp4), tdm(spi-cs0), audio(sdo),
+                       lcd(d4)
+mpp25         25       gpio, ge1(rxd1), ts(mp5), tdm(spi-sck), audio(lrclk),
+                       lcd(d5)
+mpp26         26       gpio, ge1(rxd2), ts(mp6), tdm(spi-miso), audio(mclk),
+                       lcd(d6)
+mpp27         27       gpio, ge1(rxd3), ts(mp7), tdm(spi-mosi), audio(sdi),
+                       lcd(d7)
+mpp28         28       gpio, ge1(col), ts(mp8), tdm(int), audio(extclk),
+                       lcd(d8)
+mpp29         29       gpio, ge1(txclk), ts(mp9), tdm(rst), lcd(d9)
+mpp30         30       gpio, ge1(rxclk), ts(mp10), tdm(pclk), lcd(d10)
+mpp31         31       gpio, ge1(rxclk), ts(mp11), tdm(fs), lcd(d11)
+mpp32         32       gpio, ge1(txclko), ts(mp12), tdm(drx), lcd(d12)
+mpp33         33       gpo, ge1(txclk), tdm(drx), lcd(d13)
+mpp34         34       gpio, ge1(txen), tdm(spi-cs1), sata1(act), lcd(d14)
+mpp35         35       gpio, ge1(rxerr), sata0(act), mii(rxerr), tdm(tx0ql),
+                       lcd(d15)
+mpp36         36       gpio, ts(mp0), tdm(spi-cs1), audio(spdifi), twsi1(sda)
+mpp37         37       gpio, ts(mp1), tdm(tx2ql), audio(spdifo), twsi1(sck)
+mpp38         38       gpio, ts(mp2), tdm(rx2ql), audio(rmclk), lcd(d18)
+mpp39         39       gpio, ts(mp3), tdm(spi-cs0), audio(bclk), lcd(d19)
+mpp40         40       gpio, ts(mp4), tdm(spi-sck), audio(sdo), lcd(d20)
+mpp41         41       gpio, ts(mp5), tdm(spi-miso), audio(lrclk), lcd(d21)
+mpp42         42       gpio, ts(mp6), tdm(spi-mosi), audio(mclk), lcd(d22)
+mpp43         43       gpio, ts(mp7), tdm(int), audio(sdi), lcd(d23)
+mpp44         44       gpio, ts(mp8), tdm(rst), audio(extclk), lcd(clk)
+mpp45         45       gpio, ts(mp9), tdm(pclk), lcd(e)
+mpp46         46       gpio, ts(mp10), tdm(fs), lcd(hsync)
+mpp47         47       gpio, ts(mp11), tdm(drx), lcd(vsync)
+mpp48         48       gpio, ts(mp12), tdm(dtx), lcd(d16)
+mpp49         49       gpo, tdm(rx0ql), pex(clkreq), lcd(d17)
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index f15eba4..31c0bba 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -155,6 +155,10 @@ config PINCTRL_DOVE
 	bool
 	select PINCTRL_MVEBU
 
+config PINCTRL_KIRKWOOD
+	bool
+	select PINCTRL_MVEBU
+
 source "drivers/pinctrl/spear/Kconfig"
 
 endmenu
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index d1327df..3006294 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -31,5 +31,6 @@ obj-$(CONFIG_PINCTRL_U300)	+= pinctrl-u300.o
 obj-$(CONFIG_PINCTRL_COH901)	+= pinctrl-coh901.o
 obj-$(CONFIG_PINCTRL_MVEBU)	+= pinctrl-mvebu.o
 obj-$(CONFIG_PINCTRL_DOVE)	+= pinctrl-dove.o
+obj-$(CONFIG_PINCTRL_KIRKWOOD)	+= pinctrl-kirkwood.o
 
 obj-$(CONFIG_PLAT_SPEAR)	+= spear/
diff --git a/drivers/pinctrl/pinctrl-kirkwood.c b/drivers/pinctrl/pinctrl-kirkwood.c
new file mode 100644
index 0000000..63c58be
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-kirkwood.c
@@ -0,0 +1,473 @@
+/*
+ * Marvell Kirkwood pinctrl driver based on mvebu pinctrl core
+ *
+ * Author: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-mvebu.h"
+
+#define V(f6180, f6190, f6192, f6281, f6282)		\
+	((f6180 << 0) | (f6190 << 1) | (f6192 << 2) |	\
+	 (f6281 << 3) | (f6282 << 4))
+
+enum kirkwood_variant {
+	VARIANT_MV88F6180 = V(1, 0, 0, 0, 0),
+	VARIANT_MV88F6190 = V(0, 1, 0, 0, 0),
+	VARIANT_MV88F6192 = V(0, 0, 1, 0, 0),
+	VARIANT_MV88F6281 = V(0, 0, 0, 1, 0),
+	VARIANT_MV88F6282 = V(0, 0, 0, 0, 1),
+};
+
+static struct mvebu_mpp_mode mv88f6xxx_mpp_modes[] = {
+	MPP_MODE(0,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "nand", "io2",     V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "spi", "cs",       V(1, 1, 1, 1, 1))),
+	MPP_MODE(1,
+		MPP_VAR_FUNCTION(0x0, "gpo", NULL,       V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "nand", "io3",     V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "spi", "mosi",     V(1, 1, 1, 1, 1))),
+	MPP_MODE(2,
+		MPP_VAR_FUNCTION(0x0, "gpo", NULL,       V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "nand", "io4",     V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "spi", "sck",      V(1, 1, 1, 1, 1))),
+	MPP_MODE(3,
+		MPP_VAR_FUNCTION(0x0, "gpo", NULL,       V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "nand", "io5",     V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "spi", "miso",     V(1, 1, 1, 1, 1))),
+	MPP_MODE(4,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "nand", "io6",     V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "uart0", "rxd",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x5, "sata1", "act",    V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "hsync",    V(0, 0, 0, 0, 1)),
+		MPP_VAR_FUNCTION(0xd, "ptp", "clk",      V(1, 1, 1, 1, 0))),
+	MPP_MODE(5,
+		MPP_VAR_FUNCTION(0x0, "gpo", NULL,       V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "nand", "io7",     V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "uart0", "txd",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "ptp", "trig",     V(1, 1, 1, 1, 0)),
+		MPP_VAR_FUNCTION(0x5, "sata0", "act",    V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "vsync",    V(0, 0, 0, 0, 1))),
+	MPP_MODE(6,
+		MPP_VAR_FUNCTION(0x0, "sysrst", "out",   V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "spi", "mosi",     V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "ptp", "trig",     V(1, 1, 1, 1, 0))),
+	MPP_MODE(7,
+		MPP_VAR_FUNCTION(0x0, "gpo", NULL,       V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "pex", "rsto",     V(1, 1, 1, 1, 0)),
+		MPP_VAR_FUNCTION(0x2, "spi", "cs",       V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ptp", "trig",     V(1, 1, 1, 1, 0)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "pwm",      V(0, 0, 0, 0, 1))),
+	MPP_MODE(8,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "twsi0", "sda",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "uart0", "rts",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "uart1", "rts",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "mii-1", "rxerr",  V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x5, "sata1", "prsnt",  V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xc, "ptp", "clk",      V(1, 1, 1, 1, 0)),
+		MPP_VAR_FUNCTION(0xd, "mii", "col",      V(1, 1, 1, 1, 1))),
+	MPP_MODE(9,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "twsi0", "sck",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "uart0", "cts",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "uart1", "cts",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x5, "sata0", "prsnt",  V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xc, "ptp", "evreq",    V(1, 1, 1, 1, 0)),
+		MPP_VAR_FUNCTION(0xd, "mii", "crs",      V(1, 1, 1, 1, 1))),
+	MPP_MODE(10,
+		MPP_VAR_FUNCTION(0x0, "gpo", NULL,       V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "spi", "sck",      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0X3, "uart0", "txd",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x5, "sata1", "act",    V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xc, "ptp", "trig",     V(1, 1, 1, 1, 0))),
+	MPP_MODE(11,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "spi", "miso",     V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "uart0", "rxd",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "ptp-1", "evreq",  V(1, 1, 1, 1, 0)),
+		MPP_VAR_FUNCTION(0xc, "ptp-2", "trig",   V(1, 1, 1, 1, 0)),
+		MPP_VAR_FUNCTION(0xd, "ptp", "clk",      V(1, 1, 1, 1, 0)),
+		MPP_VAR_FUNCTION(0x5, "sata0", "act",    V(0, 1, 1, 1, 1))),
+	MPP_MODE(12,
+		MPP_VAR_FUNCTION(0x0, "gpo", NULL,       V(1, 1, 1, 0, 1)),
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 0, 0, 1, 0)),
+		MPP_VAR_FUNCTION(0x1, "sdio", "clk",     V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xa, "audio", "spdifo", V(0, 0, 0, 0, 1)),
+		MPP_VAR_FUNCTION(0xb, "spi", "mosi",     V(0, 0, 0, 0, 1)),
+		MPP_VAR_FUNCTION(0xd, "twsi1", "sda",    V(0, 0, 0, 0, 1))),
+	MPP_MODE(13,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "sdio", "cmd",     V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "uart1", "txd",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xa, "audio", "rmclk",  V(0, 0, 0, 0, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "pwm",      V(0, 0, 0, 0, 1))),
+	MPP_MODE(14,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "sdio", "d0",      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "uart1", "rxd",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "sata1", "prsnt",  V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xa, "audio", "spdifi", V(0, 0, 0, 0, 1)),
+		MPP_VAR_FUNCTION(0xb, "audio-1", "sdi",  V(0, 0, 0, 0, 1)),
+		MPP_VAR_FUNCTION(0xd, "mii", "col",      V(1, 1, 1, 1, 1))),
+	MPP_MODE(15,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "sdio", "d1",      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "uart0", "rts",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "uart1", "txd",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "sata0", "act",    V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "spi", "cs",       V(0, 0, 0, 0, 1))),
+	MPP_MODE(16,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "sdio", "d2",      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "uart0", "cts",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "uart1", "rxd",    V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "sata1", "act",    V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "extclk",   V(0, 0, 0, 0, 1)),
+		MPP_VAR_FUNCTION(0xd, "mii", "crs",      V(1, 1, 1, 1, 1))),
+	MPP_MODE(17,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "sdio", "d3",      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "sata0", "prsnt",  V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xa, "sata1", "act",    V(0, 0, 0, 0, 1)),
+		MPP_VAR_FUNCTION(0xd, "twsi1", "sck",    V(0, 0, 0, 0, 1))),
+	MPP_MODE(18,
+		MPP_VAR_FUNCTION(0x0, "gpo", NULL,       V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "nand", "io0",     V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "pex", "clkreq",   V(0, 0, 0, 0, 1))),
+	MPP_MODE(19,
+		MPP_VAR_FUNCTION(0x0, "gpo", NULL,       V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "nand", "io1",     V(1, 1, 1, 1, 1))),
+	MPP_MODE(20,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp0",       V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "tx0ql",    V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "txd0",     V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "spdifi", V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x5, "sata1", "act",    V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d0",       V(0, 0, 0, 0, 1)),
+		MPP_VAR_FUNCTION(0xc, "mii", "rxerr",    V(1, 0, 0, 0, 0))),
+	MPP_MODE(21,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp1",       V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "rx0ql",    V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "txd1",     V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "spdifi", V(1, 0, 0, 0, 0)),
+		MPP_VAR_FUNCTION(0x4, "audio", "spdifo", V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x5, "sata0", "act",    V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d1",       V(0, 0, 0, 0, 1))),
+	MPP_MODE(22,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp2",       V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "tx2ql",    V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "txd2",     V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "spdifo", V(1, 0, 0, 0, 0)),
+		MPP_VAR_FUNCTION(0x4, "audio", "rmclk",  V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x5, "sata1", "prsnt",  V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d2",       V(0, 0, 0, 0, 1))),
+	MPP_MODE(23,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp3",       V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "rx2ql",    V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "txd3",     V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "rmclk",  V(1, 0, 0, 0, 0)),
+		MPP_VAR_FUNCTION(0x4, "audio", "bclk",   V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x5, "sata0", "prsnt",  V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d3",       V(0, 0, 0, 0, 1))),
+	MPP_MODE(24,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp4",       V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "spi-cs0",  V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "rxd0",     V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "bclk",   V(1, 0, 0, 0, 0)),
+		MPP_VAR_FUNCTION(0x4, "audio", "sdo",    V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d4",       V(0, 0, 0, 0, 1))),
+	MPP_MODE(25,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp5",       V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "spi-sck",  V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "rxd1",     V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "sdo",    V(1, 0, 0, 0, 0)),
+		MPP_VAR_FUNCTION(0x4, "audio", "lrclk",  V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d5",       V(0, 0, 0, 0, 1))),
+	MPP_MODE(26,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp6",       V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "spi-miso", V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "rxd2",     V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "lrclk",  V(1, 0, 0, 0, 0)),
+		MPP_VAR_FUNCTION(0x4, "audio", "mclk",   V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d6",       V(0, 0, 0, 0, 1))),
+	MPP_MODE(27,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp7",       V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "spi-mosi", V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "rxd3",     V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "mclk",   V(1, 0, 0, 0, 0)),
+		MPP_VAR_FUNCTION(0x4, "audio", "sdi",    V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d7",       V(0, 0, 0, 0, 1))),
+	MPP_MODE(28,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp8",       V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "int",      V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "col",      V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "sdi",    V(1, 0, 0, 0, 0)),
+		MPP_VAR_FUNCTION(0x4, "audio", "extclk", V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d8",       V(0, 0, 0, 0, 1))),
+	MPP_MODE(29,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp9",       V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "rst",      V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "txclk",    V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "extclk", V(1, 0, 0, 0, 0)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d9",       V(0, 0, 0, 0, 1))),
+	MPP_MODE(30,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp10",      V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "pclk",     V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "rxctl",    V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d10",      V(0, 0, 0, 0, 1))),
+	MPP_MODE(31,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp11",      V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "fs",       V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "rxclk",    V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d11",      V(0, 0, 0, 0, 1))),
+	MPP_MODE(32,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp12",      V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "drx",      V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "txclko",   V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d12",      V(0, 0, 0, 0, 1))),
+	MPP_MODE(33,
+		MPP_VAR_FUNCTION(0x0, "gpo", NULL,       V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "dtx",      V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "txctl",    V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d13",      V(0, 0, 0, 0, 1))),
+	MPP_MODE(34,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "spi-cs1",  V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "txen",     V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x5, "sata1", "act",    V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d14",      V(0, 0, 0, 0, 1))),
+	MPP_MODE(35,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "tx0ql",    V(0, 0, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ge1", "rxerr",    V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x5, "sata0", "act",    V(0, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d15",      V(0, 0, 0, 0, 1)),
+		MPP_VAR_FUNCTION(0xc, "mii", "rxerr",    V(0, 1, 1, 1, 1))),
+	MPP_MODE(36,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp0",       V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "spi-cs1",  V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "spdifi", V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "twsi1", "sda",    V(0, 0, 0, 0, 1))),
+	MPP_MODE(37,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp1",       V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "tx2ql",    V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "spdifo", V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "twsi1", "sck",    V(0, 0, 0, 0, 1))),
+	MPP_MODE(38,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp2",       V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "rx2ql",    V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "rmclk",  V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d18",      V(0, 0, 0, 0, 1))),
+	MPP_MODE(39,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp3",       V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "spi-cs0",  V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "bclk",   V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d19",      V(0, 0, 0, 0, 1))),
+	MPP_MODE(40,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp4",       V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "spi-sck",  V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "sdo",    V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d20",      V(0, 0, 0, 0, 1))),
+	MPP_MODE(41,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp5",       V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "spi-miso", V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "lrclk",  V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d21",      V(0, 0, 0, 0, 1))),
+	MPP_MODE(42,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp6",       V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "spi-mosi", V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "mclk",   V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d22",      V(0, 0, 0, 0, 1))),
+	MPP_MODE(43,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp7",       V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "int",      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "sdi",    V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d23",      V(0, 0, 0, 0, 1))),
+	MPP_MODE(44,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp8",       V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "rst",      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x4, "audio", "extclk", V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "clk",      V(0, 0, 0, 0, 1))),
+	MPP_MODE(45,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp9",       V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "pclk",     V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "e",        V(0, 0, 0, 0, 1))),
+	MPP_MODE(46,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp10",      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "fs",       V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "hsync",    V(0, 0, 0, 0, 1))),
+	MPP_MODE(47,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp11",      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "drx",      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "vsync",    V(0, 0, 0, 0, 1))),
+	MPP_MODE(48,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp12",      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "dtx",      V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d16",      V(0, 0, 0, 0, 1))),
+	MPP_MODE(49,
+		MPP_VAR_FUNCTION(0x0, "gpio", NULL,      V(0, 0, 0, 1, 0)),
+		MPP_VAR_FUNCTION(0x0, "gpo", NULL,       V(0, 0, 0, 0, 1)),
+		MPP_VAR_FUNCTION(0x1, "ts", "mp9",       V(0, 0, 0, 1, 0)),
+		MPP_VAR_FUNCTION(0x2, "tdm", "rx0ql",    V(0, 0, 0, 1, 1)),
+		MPP_VAR_FUNCTION(0x5, "ptp", "clk",      V(0, 0, 0, 1, 0)),
+		MPP_VAR_FUNCTION(0xa, "pex", "clkreq",   V(0, 0, 0, 0, 1)),
+		MPP_VAR_FUNCTION(0xb, "lcd", "d17",      V(0, 0, 0, 0, 1))),
+};
+
+static struct mvebu_mpp_ctrl mv88f6180_mpp_controls[] = {
+	MPP_REG_CTRL(0, 29),
+};
+
+static struct pinctrl_gpio_range mv88f6180_gpio_ranges[] = {
+	MPP_GPIO_RANGE(0, 0, 0, 30),
+};
+
+static struct mvebu_mpp_ctrl mv88f619x_mpp_controls[] = {
+	MPP_REG_CTRL(0, 35),
+};
+
+static struct pinctrl_gpio_range mv88f619x_gpio_ranges[] = {
+	MPP_GPIO_RANGE(0,  0,  0, 32),
+	MPP_GPIO_RANGE(1, 32, 32,  4),
+};
+
+static struct mvebu_mpp_ctrl mv88f628x_mpp_controls[] = {
+	MPP_REG_CTRL(0, 49),
+};
+
+static struct pinctrl_gpio_range mv88f628x_gpio_ranges[] = {
+	MPP_GPIO_RANGE(0,  0,  0, 32),
+	MPP_GPIO_RANGE(1, 32, 32, 18),
+};
+
+static struct mvebu_pinctrl_soc_info mv88f6180_soc_info = {
+	.variant = VARIANT_MV88F6180,
+	.controls = mv88f6180_mpp_controls,
+	.ncontrols = ARRAY_SIZE(mv88f6180_mpp_controls),
+	.modes = mv88f6xxx_mpp_modes,
+	.nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes),
+	.gpioranges = mv88f6180_gpio_ranges,
+	.ngpioranges = ARRAY_SIZE(mv88f6180_gpio_ranges),
+};
+
+static struct mvebu_pinctrl_soc_info mv88f6190_soc_info = {
+	.variant = VARIANT_MV88F6190,
+	controls = mv88f619x_mpp_controls,
+	ncontrols = ARRAY_SIZE(mv88f619x_mpp_controls),
+	modes = mv88f6xxx_mpp_modes,
+	nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes),
+	gpioranges = mv88f619x_gpio_ranges,
+	ngpioranges = ARRAY_SIZE(mv88f619x_gpio_ranges),
+};
+
+static struct mvebu_pinctrl_soc_info mv88f6192_soc_info = {
+	.variant = VARIANT_MV88F6192,
+	.controls = mv88f619x_mpp_controls,
+	.ncontrols = ARRAY_SIZE(mv88f619x_mpp_controls),
+	.modes = mv88f6xxx_mpp_modes,
+	.nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes),
+	.gpioranges = mv88f619x_gpio_ranges,
+	.ngpioranges = ARRAY_SIZE(mv88f619x_gpio_ranges),
+};
+
+static struct mvebu_pinctrl_soc_info mv88f6281_soc_info = {
+	.variant = VARIANT_MV88F6281,
+	.controls = mv88f628x_mpp_controls,
+	.ncontrols = ARRAY_SIZE(mv88f628x_mpp_controls),
+	.modes = mv88f6xxx_mpp_modes,
+	.nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes),
+	.gpioranges = mv88f628x_gpio_ranges,
+	.ngpioranges = ARRAY_SIZE(mv88f628x_gpio_ranges),
+};
+
+static struct mvebu_pinctrl_soc_info mv88f6282_soc_info = {
+	.variant = VARIANT_MV88F6282,
+	.controls = mv88f628x_mpp_controls,
+	.ncontrols = ARRAY_SIZE(mv88f628x_mpp_controls),
+	.modes = mv88f6xxx_mpp_modes,
+	.nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes),
+	.gpioranges = mv88f628x_gpio_ranges,
+	.ngpioranges = ARRAY_SIZE(mv88f628x_gpio_ranges),
+};
+
+static struct of_device_id kirkwood_pinctrl_of_match[] __devinitdata = {
+	{ .compatible = "marvell,88f6180-pinctrl", .data = mv88f6180_soc_info },
+	{ .compatible = "marvell,88f6190-pinctrl", .data = mv88f6190_soc_info },
+	{ .compatible = "marvell,88f6192-pinctrl", .data = mv88f6192_soc_info },
+	{ .compatible = "marvell,88f6281-pinctrl", .data = mv88f6281_soc_info },
+	{ .compatible = "marvell,88f6282-pinctrl", .data = mv88f6282_soc_info },
+	{ }
+};
+
+static int __devinit kirkwood_pinctrl_probe(struct platform_device *pdev)
+{
+	struct mvebu_pinctrl_soc_info *soc = &kirkwood_pinctrl_info;
+	const struct of_device_id *match =
+		of_match_device(kirkwood_pinctrl_of_match, &pdev->dev);
+	pdev->dev.platform_data = match->data;
+	return mvebu_pinctrl_probe(pdev);
+}
+
+static int __devexit kirkwood_pinctrl_remove(struct platform_device *pdev)
+{
+	return mvebu_pinctrl_remove(pdev);
+}
+
+static struct platform_driver kirkwood_pinctrl_driver = {
+	.driver = {
+		.name = "kirkwood-pinctrl",
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(kirkwood_pinctrl_of_match),
+	},
+	.probe = kirkwood_pinctrl_probe,
+	.remove = __devexit_p(kirkwood_pinctrl_remove),
+};
+
+module_platform_driver(kirkwood_pinctrl_driver);
+
+MODULE_AUTHOR("Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>");
+MODULE_DESCRIPTION("Marvell Kirkwood pinctrl driver");
+MODULE_LICENSE("GPL v2");
-- 
1.7.10.4

[PATCH v3 2/9] pinctrl: mvebu: dove pinctrl driver

From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: 2012-09-10 08:40:26

This patch adds a SoC specific pinctrl driver for Marvell Dove SoCs
plus DT binding documentation. This driver will use the mvebu pinctrl
driver core.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
v2:
- restructured pinctrl/Kconfig to hide pinctrl driver as it will be
  always selected by arch/arm/mach-mvebu/Kconfig
- cleaned pinctrl-dove and replaced 'magic numbers' by defines
- use devm_clk_get for (now optional) pdma clock and add to required
  properties in devicetree binding documentation

Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Thomas Petazzoni <redacted>
Cc: Grant Likely <redacted>
Cc: Rob Herring <redacted>
Cc: Rob Landley <redacted>
Cc: Russell King <redacted>
Cc: Lior Amsalem <redacted>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Jason Cooper <redacted>
Cc: Gregory CLEMENT <redacted>
Cc: Ben Dooks <redacted>
Cc: Linus Walleij <redacted>
Cc: Stephen Warren <redacted>
Cc: devicetree-discuss at lists.ozlabs.org
Cc: linux-doc at vger.kernel.org
Cc: linux-kernel at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
---
 .../bindings/pinctrl/marvell,dove-pinctrl.txt      |   72 +++
 drivers/pinctrl/Kconfig                            |    4 +
 drivers/pinctrl/Makefile                           |    1 +
 drivers/pinctrl/pinctrl-dove.c                     |  622 ++++++++++++++++++++
 4 files changed, 699 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt
 create mode 100644 drivers/pinctrl/pinctrl-dove.c
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt
new file mode 100644
index 0000000..a648aaa
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt
@@ -0,0 +1,72 @@
+* Marvell Dove SoC pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "marvell,dove-pinctrl"
+- clocks: (optional) phandle of pdma clock
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, pmu, uart2(rts), sdio0(cd), lcd0(pwm)
+mpp1          1        gpio, pmu, uart2(cts), sdio0(wp), lcd1(pwm)
+mpp2          2        gpio, pmu, uart2(txd), sdio0(buspwr), sata(prsnt),
+                       uart1(rts)
+mpp3          3        gpio, pmu, uart2(rxd), sdio0(ledctrl), sata(act),
+                       uart1(cts), lcd-spi(cs1)
+mpp4          4        gpio, pmu, uart3(rts), sdio1(cd), spi1(miso)
+mpp5          5        gpio, pmu, uart3(cts), sdio1(wp), spi1(cs)
+mpp6          6        gpio, pmu, uart3(txd), sdio1(buspwr), spi1(mosi)
+mpp7          7        gpio, pmu, uart3(rxd), sdio1(ledctrl), spi1(sck)
+mpp8          8        gpio, pmu, watchdog(rstout)
+mpp9          9        gpio, pmu, pex1(clkreq)
+mpp10         10       gpio, pmu, ssp(sclk)
+mpp11         11       gpio, pmu, sata(prsnt), sata-1(act), sdio0(ledctrl),
+                       sdio1(ledctrl), pex0(clkreq)
+mpp12         12       gpio, pmu, uart2(rts), audio0(extclk), sdio1(cd), sata(act)
+mpp13         13       gpio, pmu, uart2(cts), audio1(extclk), sdio1(wp),
+                       ssp(extclk)
+mpp14         14       gpio, pmu, uart2(txd), sdio1(buspwr), ssp(rxd)
+mpp15         15       gpio, pmu, uart2(rxd), sdio1(ledctrl), ssp(sfrm)
+mpp16         16       gpio, uart3(rts), sdio0(cd), ac97(sdi1), lcd-spi(cs1)
+mpp17         17       gpio, uart3(cts), sdio0(wp), ac97(sdi2), twsi(sda),
+                       ac97-1(sysclko)
+mpp18         18       gpio, uart3(txd), sdio0(buspwr), ac97(sdi3), lcd0(pwm)
+mpp19         19       gpio, uart3(rxd), sdio0(ledctrl), twsi(sck)
+mpp20         20       gpio, sdio0(cd), sdio1(cd), spi1(miso), lcd-spi(miso),
+                       ac97(sysclko)
+mpp21         21       gpio, sdio0(wp), sdio1(wp), spi1(cs), lcd-spi(cs0),
+                       uart1(cts), ssp(sfrm)
+mpp22         22       gpio, sdio0(buspwr), sdio1(buspwr), spi1(mosi),
+                       lcd-spi(mosi), uart1(cts), ssp(txd)
+mpp23         23       gpio, sdio0(ledctrl), sdio1(ledctrl), spi1(sck),
+                       lcd-spi(sck), ssp(sclk)
+mpp_camera    24-39    gpio, camera
+mpp_sdio0     40-45    gpio, sdio0
+mpp_sdio1     46-51    gpio, sdio1
+mpp_audio1    52-57    gpio, i2s1/spdifo, i2s1, spdifo, twsi, ssp/spdifo, ssp,
+                       ssp/twsi
+mpp_spi0      58-61    gpio, spi0
+mpp_uart1     62-63    gpio, uart1
+mpp_nand      64-71    gpo, nand
+audio0        -        i2s, ac97
+twsi          -        none, opt1, opt2, opt3
+
+Notes:
+* group "mpp_audio1" allows the following functions and gpio pins:
+  - gpio          : gpio on pins 52-57
+  - i2s1/spdifo   : audio1 i2s on pins 52-55 and spdifo on 57, no gpios
+  - i2s1          : audio1 i2s on pins 52-55, gpio on pins 56,57
+  - spdifo        : spdifo on pin 57, gpio on pins 52-55
+  - twsi          : twsi on pins 56,57, gpio on pins 52-55
+  - ssp/spdifo    : ssp on pins 52-55, spdifo on pin 57, no gpios
+  - ssp           : ssp on pins 52-55, gpio on pins 56,57
+  - ssp/twsi      : ssp on pins 52-55, twsi on pins 56,57, no gpios
+* group "audio0" internally muxes i2s0 or ac97 controller to the dedicated
+  audio0 pins.
+* group "twsi" internally muxes twsi controller to the dedicated or option pins.
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 20bfdc3..f15eba4 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -151,6 +151,10 @@ config PINCTRL_MVEBU
 	select PINMUX
 	select PINCONF
 
+config PINCTRL_DOVE
+	bool
+	select PINCTRL_MVEBU
+
 source "drivers/pinctrl/spear/Kconfig"
 
 endmenu
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 007ed32..d1327df 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -30,5 +30,6 @@ obj-$(CONFIG_PINCTRL_TEGRA30)	+= pinctrl-tegra30.o
 obj-$(CONFIG_PINCTRL_U300)	+= pinctrl-u300.o
 obj-$(CONFIG_PINCTRL_COH901)	+= pinctrl-coh901.o
 obj-$(CONFIG_PINCTRL_MVEBU)	+= pinctrl-mvebu.o
+obj-$(CONFIG_PINCTRL_DOVE)	+= pinctrl-dove.o
 
 obj-$(CONFIG_PLAT_SPEAR)	+= spear/
diff --git a/drivers/pinctrl/pinctrl-dove.c b/drivers/pinctrl/pinctrl-dove.c
new file mode 100644
index 0000000..cb31b63
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-dove.c
@@ -0,0 +1,622 @@
+/*
+ * Marvell Dove pinctrl driver based on mvebu pinctrl core
+ *
+ * Author: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/bitops.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-mvebu.h"
+
+#define DOVE_SB_REGS_VIRT_BASE		0xfde00000
+#define DOVE_MPP_VIRT_BASE		(DOVE_SB_REGS_VIRT_BASE | 0xd0200)
+#define DOVE_PMU_MPP_GENERAL_CTRL	(DOVE_MPP_VIRT_BASE + 0x10)
+#define  DOVE_AU0_AC97_SEL		BIT(16)
+#define DOVE_GLOBAL_CONFIG_1		(DOVE_SB_REGS_VIRT_BASE | 0xe802C)
+#define  DOVE_TWSI_ENABLE_OPTION1	BIT(7)
+#define DOVE_GLOBAL_CONFIG_2		(DOVE_SB_REGS_VIRT_BASE | 0xe8030)
+#define  DOVE_TWSI_ENABLE_OPTION2	BIT(20)
+#define  DOVE_TWSI_ENABLE_OPTION3	BIT(21)
+#define  DOVE_TWSI_OPTION3_GPIO		BIT(22)
+#define DOVE_SSP_CTRL_STATUS_1		(DOVE_SB_REGS_VIRT_BASE | 0xe8034)
+#define  DOVE_SSP_ON_AU1		BIT(0)
+#define DOVE_MPP_GENERAL_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xe803c)
+#define  DOVE_AU1_SPDIFO_GPIO_EN	BIT(1)
+#define  DOVE_NAND_GPIO_EN		BIT(0)
+#define DOVE_GPIO_LO_VIRT_BASE		(DOVE_SB_REGS_VIRT_BASE | 0xd0400)
+#define DOVE_MPP_CTRL4_VIRT_BASE	(DOVE_GPIO_LO_VIRT_BASE + 0x40)
+#define  DOVE_SPI_GPIO_SEL		BIT(5)
+#define  DOVE_UART1_GPIO_SEL		BIT(4)
+#define  DOVE_AU1_GPIO_SEL		BIT(3)
+#define  DOVE_CAM_GPIO_SEL		BIT(2)
+#define  DOVE_SD1_GPIO_SEL		BIT(1)
+#define  DOVE_SD0_GPIO_SEL		BIT(0)
+
+#define MPPS_PER_REG	8
+#define MPP_BITS	4
+#define MPP_MASK	0xf
+
+#define CONFIG_PMU	BIT(4)
+
+static int dove_pmu_mpp_ctrl_get(struct mvebu_mpp_ctrl *ctrl,
+				 unsigned long *config)
+{
+	unsigned off = (ctrl->pid / MPPS_PER_REG) * MPP_BITS;
+	unsigned shift = (ctrl->pid % MPPS_PER_REG) * MPP_BITS;
+	unsigned long pmu = readl(DOVE_PMU_MPP_GENERAL_CTRL);
+	unsigned long mpp = readl(DOVE_MPP_VIRT_BASE + off);
+
+	if (pmu & (1 << ctrl->pid))
+		*config = CONFIG_PMU;
+	else
+		*config = (mpp >> shift) & MPP_MASK;
+	return 0;
+}
+
+static int dove_pmu_mpp_ctrl_set(struct mvebu_mpp_ctrl *ctrl,
+				 unsigned long config)
+{
+	unsigned off = (ctrl->pid / MPPS_PER_REG) * MPP_BITS;
+	unsigned shift = (ctrl->pid % MPPS_PER_REG) * MPP_BITS;
+	unsigned long pmu = readl(DOVE_PMU_MPP_GENERAL_CTRL);
+	unsigned long mpp = readl(DOVE_MPP_VIRT_BASE + off);
+
+	if (config == CONFIG_PMU)
+		writel(pmu | (1 << ctrl->pid), DOVE_PMU_MPP_GENERAL_CTRL);
+	else {
+		writel(pmu & ~(1 << ctrl->pid), DOVE_PMU_MPP_GENERAL_CTRL);
+		mpp &= ~(MPP_MASK << shift);
+		mpp |= config << shift;
+		writel(mpp, DOVE_MPP_VIRT_BASE + off);
+	}
+	return 0;
+}
+
+static int dove_mpp4_ctrl_get(struct mvebu_mpp_ctrl *ctrl,
+			      unsigned long *config)
+{
+	unsigned long mpp4 = readl(DOVE_MPP_CTRL4_VIRT_BASE);
+	unsigned long mask;
+
+	switch (ctrl->pid) {
+	case 24: /* mpp_camera */
+		mask = DOVE_CAM_GPIO_SEL;
+		break;
+	case 40: /* mpp_sdio0 */
+		mask = DOVE_SD0_GPIO_SEL;
+		break;
+	case 46: /* mpp_sdio1 */
+		mask = DOVE_SD1_GPIO_SEL;
+		break;
+	case 58: /* mpp_spi0 */
+		mask = DOVE_SPI_GPIO_SEL;
+		break;
+	case 62: /* mpp_uart1 */
+		mask = DOVE_UART1_GPIO_SEL;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	*config = ((mpp4 & mask) != 0);
+
+	return 0;
+}
+
+static int dove_mpp4_ctrl_set(struct mvebu_mpp_ctrl *ctrl,
+			      unsigned long config)
+{
+	unsigned long mpp4 = readl(DOVE_MPP_CTRL4_VIRT_BASE);
+	unsigned long mask;
+
+	switch (ctrl->pid) {
+	case 24: /* mpp_camera */
+		mask = DOVE_CAM_GPIO_SEL;
+		break;
+	case 40: /* mpp_sdio0 */
+		mask = DOVE_SD0_GPIO_SEL;
+		break;
+	case 46: /* mpp_sdio1 */
+		mask = DOVE_SD1_GPIO_SEL;
+		break;
+	case 58: /* mpp_spi0 */
+		mask = DOVE_SPI_GPIO_SEL;
+		break;
+	case 62: /* mpp_uart1 */
+		mask = DOVE_UART1_GPIO_SEL;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	mpp4 &= ~mask;
+	if (config)
+		mpp4 |= mask;
+
+	writel(mpp4, DOVE_MPP_CTRL4_VIRT_BASE);
+
+	return 0;
+}
+
+static int dove_nand_ctrl_get(struct mvebu_mpp_ctrl *ctrl,
+			      unsigned long *config)
+{
+	unsigned long gmpp = readl(DOVE_MPP_GENERAL_VIRT_BASE);
+
+	*config = ((gmpp & DOVE_NAND_GPIO_EN) != 0);
+
+	return 0;
+}
+
+static int dove_nand_ctrl_set(struct mvebu_mpp_ctrl *ctrl,
+			      unsigned long config)
+{
+	unsigned long gmpp = readl(DOVE_MPP_GENERAL_VIRT_BASE);
+
+	gmpp &= ~DOVE_NAND_GPIO_EN;
+	if (config)
+		gmpp |= DOVE_NAND_GPIO_EN;
+
+	writel(gmpp, DOVE_MPP_GENERAL_VIRT_BASE);
+
+	return 0;
+}
+
+static int dove_audio0_ctrl_get(struct mvebu_mpp_ctrl *ctrl,
+				unsigned long *config)
+{
+	unsigned long pmu = readl(DOVE_PMU_MPP_GENERAL_CTRL);
+
+	*config = ((pmu & DOVE_AU0_AC97_SEL) != 0);
+
+	return 0;
+}
+
+static int dove_audio0_ctrl_set(struct mvebu_mpp_ctrl *ctrl,
+				unsigned long config)
+{
+	unsigned long pmu = readl(DOVE_PMU_MPP_GENERAL_CTRL);
+
+	pmu &= ~DOVE_AU0_AC97_SEL;
+	if (config)
+		pmu |= DOVE_AU0_AC97_SEL;
+	writel(pmu, DOVE_PMU_MPP_GENERAL_CTRL);
+
+	return 0;
+}
+
+static int dove_audio1_ctrl_get(struct mvebu_mpp_ctrl *ctrl,
+				unsigned long *config)
+{
+	unsigned long mpp4 = readl(DOVE_MPP_CTRL4_VIRT_BASE);
+	unsigned long sspc1 = readl(DOVE_SSP_CTRL_STATUS_1);
+	unsigned long gmpp = readl(DOVE_MPP_GENERAL_VIRT_BASE);
+	unsigned long gcfg2 = readl(DOVE_GLOBAL_CONFIG_2);
+
+	*config = 0;
+	if (mpp4 & DOVE_AU1_GPIO_SEL)
+		*config |= BIT(3);
+	if (sspc1 & DOVE_SSP_ON_AU1)
+		*config |= BIT(2);
+	if (gmpp & DOVE_AU1_SPDIFO_GPIO_EN)
+		*config |= BIT(1);
+	if (gcfg2 & DOVE_TWSI_OPTION3_GPIO)
+		*config |= BIT(0);
+
+	/* SSP/TWSI only if I2S1 not set*/
+	if ((*config & BIT(3)) == 0)
+		*config &= ~(BIT(2) | BIT(0));
+	/* TWSI only if SPDIFO not set*/
+	if ((*config & BIT(1)) == 0)
+		*config &= ~BIT(0);
+	return 0;
+}
+
+static int dove_audio1_ctrl_set(struct mvebu_mpp_ctrl *ctrl,
+				unsigned long config)
+{
+	unsigned long mpp4 = readl(DOVE_MPP_CTRL4_VIRT_BASE);
+	unsigned long sspc1 = readl(DOVE_SSP_CTRL_STATUS_1);
+	unsigned long gmpp = readl(DOVE_MPP_GENERAL_VIRT_BASE);
+	unsigned long gcfg2 = readl(DOVE_GLOBAL_CONFIG_2);
+
+	if (config & BIT(0))
+		gcfg2 |= DOVE_TWSI_OPTION3_GPIO;
+	if (config & BIT(1))
+		gmpp |= DOVE_AU1_SPDIFO_GPIO_EN;
+	if (config & BIT(2))
+		sspc1 |= DOVE_SSP_ON_AU1;
+	if (config & BIT(3))
+		mpp4 |= DOVE_AU1_GPIO_SEL;
+
+	writel(mpp4, DOVE_MPP_CTRL4_VIRT_BASE);
+	writel(sspc1, DOVE_SSP_CTRL_STATUS_1);
+	writel(gmpp, DOVE_MPP_GENERAL_VIRT_BASE);
+	writel(gcfg2, DOVE_GLOBAL_CONFIG_2);
+
+	return 0;
+}
+
+/* mpp[52:57] gpio pins depend heavily on current config;
+ * gpio_req does not try to mux in gpio capabilities to not
+ * break other functions. If you require all mpps as gpio
+ * enforce gpio setting by pinctrl mapping.
+ */
+static int dove_audio1_ctrl_gpio_req(struct mvebu_mpp_ctrl *ctrl, u8 pid)
+{
+	unsigned long config;
+
+	dove_audio1_ctrl_get(ctrl, &config);
+
+	switch (config) {
+	case 0x02: /* i2s1 : gpio[56:57] */
+	case 0x0e: /* ssp  : gpio[56:57] */
+		if (pid >= 56)
+			return 0;
+		return -ENOTSUPP;
+	case 0x08: /* spdifo : gpio[52:55] */
+	case 0x0b: /* twsi   : gpio[52:55] */
+		if (pid <= 55)
+			return 0;
+		return -ENOTSUPP;
+	case 0x0a: /* all gpio */
+		return 0;
+	/* 0x00 : i2s1/spdifo : no gpio */
+	/* 0x0c : ssp/spdifo  : no gpio */
+	/* 0x0f : ssp/twsi    : no gpio */
+	}
+	return -ENOTSUPP;
+}
+
+/* mpp[52:57] has gpio pins capable of in and out */
+static int dove_audio1_ctrl_gpio_dir(struct mvebu_mpp_ctrl *ctrl, u8 pid,
+				bool input)
+{
+	if (pid < 52 || pid > 57)
+		return -ENOTSUPP;
+	return 0;
+}
+
+static int dove_twsi_ctrl_get(struct mvebu_mpp_ctrl *ctrl,
+			      unsigned long *config)
+{
+	unsigned long gcfg1 = readl(DOVE_GLOBAL_CONFIG_1);
+	unsigned long gcfg2 = readl(DOVE_GLOBAL_CONFIG_2);
+
+	*config = 0;
+	if (gcfg1 & DOVE_TWSI_ENABLE_OPTION1)
+		*config = 1;
+	else if (gcfg2 & DOVE_TWSI_ENABLE_OPTION2)
+		*config = 2;
+	else if (gcfg2 & DOVE_TWSI_ENABLE_OPTION3)
+		*config = 3;
+
+	return 0;
+}
+
+static int dove_twsi_ctrl_set(struct mvebu_mpp_ctrl *ctrl,
+				unsigned long config)
+{
+	unsigned long gcfg1 = readl(DOVE_GLOBAL_CONFIG_1);
+	unsigned long gcfg2 = readl(DOVE_GLOBAL_CONFIG_2);
+
+	gcfg1 &= ~DOVE_TWSI_ENABLE_OPTION1;
+	gcfg2 &= ~(DOVE_TWSI_ENABLE_OPTION2 | DOVE_TWSI_ENABLE_OPTION2);
+
+	switch (config) {
+	case 1:
+		gcfg1 |= DOVE_TWSI_ENABLE_OPTION1;
+		break;
+	case 2:
+		gcfg2 |= DOVE_TWSI_ENABLE_OPTION2;
+		break;
+	case 3:
+		gcfg2 |= DOVE_TWSI_ENABLE_OPTION3;
+		break;
+	}
+
+	writel(gcfg1, DOVE_GLOBAL_CONFIG_1);
+	writel(gcfg2, DOVE_GLOBAL_CONFIG_2);
+
+	return 0;
+}
+
+static struct mvebu_mpp_ctrl dove_mpp_controls[] = {
+	MPP_FUNC_CTRL(0, 0, "mpp0", dove_pmu_mpp_ctrl),
+	MPP_FUNC_CTRL(1, 1, "mpp1", dove_pmu_mpp_ctrl),
+	MPP_FUNC_CTRL(2, 2, "mpp2", dove_pmu_mpp_ctrl),
+	MPP_FUNC_CTRL(3, 3, "mpp3", dove_pmu_mpp_ctrl),
+	MPP_FUNC_CTRL(4, 4, "mpp4", dove_pmu_mpp_ctrl),
+	MPP_FUNC_CTRL(5, 5, "mpp5", dove_pmu_mpp_ctrl),
+	MPP_FUNC_CTRL(6, 6, "mpp6", dove_pmu_mpp_ctrl),
+	MPP_FUNC_CTRL(7, 7, "mpp7", dove_pmu_mpp_ctrl),
+	MPP_FUNC_CTRL(8, 8, "mpp8", dove_pmu_mpp_ctrl),
+	MPP_FUNC_CTRL(9, 9, "mpp9", dove_pmu_mpp_ctrl),
+	MPP_FUNC_CTRL(10, 10, "mpp10", dove_pmu_mpp_ctrl),
+	MPP_FUNC_CTRL(11, 11, "mpp11", dove_pmu_mpp_ctrl),
+	MPP_FUNC_CTRL(12, 12, "mpp12", dove_pmu_mpp_ctrl),
+	MPP_FUNC_CTRL(13, 13, "mpp13", dove_pmu_mpp_ctrl),
+	MPP_FUNC_CTRL(14, 14, "mpp14", dove_pmu_mpp_ctrl),
+	MPP_FUNC_CTRL(15, 15, "mpp15", dove_pmu_mpp_ctrl),
+	MPP_REG_CTRL(16, 23),
+	MPP_FUNC_CTRL(24, 39, "mpp_camera", dove_mpp4_ctrl),
+	MPP_FUNC_CTRL(40, 45, "mpp_sdio0", dove_mpp4_ctrl),
+	MPP_FUNC_CTRL(46, 51, "mpp_sdio1", dove_mpp4_ctrl),
+	MPP_FUNC_GPIO_CTRL(52, 57, "mpp_audio1", dove_audio1_ctrl),
+	MPP_FUNC_CTRL(58, 61, "mpp_spi0", dove_mpp4_ctrl),
+	MPP_FUNC_CTRL(62, 63, "mpp_uart1", dove_mpp4_ctrl),
+	MPP_FUNC_CTRL(64, 71, "mpp_nand", dove_nand_ctrl),
+	MPP_FUNC_CTRL(72, 72, "audio0", dove_audio0_ctrl),
+	MPP_FUNC_CTRL(73, 73, "twsi", dove_twsi_ctrl),
+};
+
+static struct mvebu_mpp_mode dove_mpp_modes[] = {
+	MPP_MODE(0,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x02, "uart2", "rts"),
+		MPP_FUNCTION(0x03, "sdio0", "cd"),
+		MPP_FUNCTION(0x0f, "lcd0", "pwm"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(1,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x02, "uart2", "cts"),
+		MPP_FUNCTION(0x03, "sdio0", "wp"),
+		MPP_FUNCTION(0x0f, "lcd1", "pwm"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(2,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x01, "sata", "prsnt"),
+		MPP_FUNCTION(0x02, "uart2", "txd"),
+		MPP_FUNCTION(0x03, "sdio0", "buspwr"),
+		MPP_FUNCTION(0x04, "uart1", "rts"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(3,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x01, "sata", "act"),
+		MPP_FUNCTION(0x02, "uart2", "rxd"),
+		MPP_FUNCTION(0x03, "sdio0", "ledctrl"),
+		MPP_FUNCTION(0x04, "uart1", "cts"),
+		MPP_FUNCTION(0x0f, "lcd-spi", "cs1"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(4,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x02, "uart3", "rts"),
+		MPP_FUNCTION(0x03, "sdio1", "cd"),
+		MPP_FUNCTION(0x04, "spi1", "miso"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(5,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x02, "uart3", "cts"),
+		MPP_FUNCTION(0x03, "sdio1", "wp"),
+		MPP_FUNCTION(0x04, "spi1", "cs"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(6,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x02, "uart3", "txd"),
+		MPP_FUNCTION(0x03, "sdio1", "buspwr"),
+		MPP_FUNCTION(0x04, "spi1", "mosi"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(7,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x02, "uart3", "rxd"),
+		MPP_FUNCTION(0x03, "sdio1", "ledctrl"),
+		MPP_FUNCTION(0x04, "spi1", "sck"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(8,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x01, "watchdog", "rstout"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(9,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x05, "pex1", "clkreq"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(10,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x05, "ssp", "sclk"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(11,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x01, "sata", "prsnt"),
+		MPP_FUNCTION(0x02, "sata-1", "act"),
+		MPP_FUNCTION(0x03, "sdio0", "ledctrl"),
+		MPP_FUNCTION(0x04, "sdio1", "ledctrl"),
+		MPP_FUNCTION(0x05, "pex0", "clkreq"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(12,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x01, "sata", "act"),
+		MPP_FUNCTION(0x02, "uart2", "rts"),
+		MPP_FUNCTION(0x03, "audio0", "extclk"),
+		MPP_FUNCTION(0x04, "sdio1", "cd"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(13,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x02, "uart2", "cts"),
+		MPP_FUNCTION(0x03, "audio1", "extclk"),
+		MPP_FUNCTION(0x04, "sdio1", "wp"),
+		MPP_FUNCTION(0x05, "ssp", "extclk"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(14,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x02, "uart2", "txd"),
+		MPP_FUNCTION(0x04, "sdio1", "buspwr"),
+		MPP_FUNCTION(0x05, "ssp", "rxd"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(15,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x02, "uart2", "rxd"),
+		MPP_FUNCTION(0x04, "sdio1", "ledctrl"),
+		MPP_FUNCTION(0x05, "ssp", "sfrm"),
+		MPP_FUNCTION(0x10, "pmu", NULL)),
+	MPP_MODE(16,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x02, "uart3", "rts"),
+		MPP_FUNCTION(0x03, "sdio0", "cd"),
+		MPP_FUNCTION(0x04, "lcd-spi", "cs1"),
+		MPP_FUNCTION(0x05, "ac97", "sdi1")),
+	MPP_MODE(17,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x01, "ac97-1", "sysclko"),
+		MPP_FUNCTION(0x02, "uart3", "cts"),
+		MPP_FUNCTION(0x03, "sdio0", "wp"),
+		MPP_FUNCTION(0x04, "twsi", "sda"),
+		MPP_FUNCTION(0x05, "ac97", "sdi2")),
+	MPP_MODE(18,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x02, "uart3", "txd"),
+		MPP_FUNCTION(0x03, "sdio0", "buspwr"),
+		MPP_FUNCTION(0x04, "lcd0", "pwm"),
+		MPP_FUNCTION(0x05, "ac97", "sdi3")),
+	MPP_MODE(19,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x02, "uart3", "rxd"),
+		MPP_FUNCTION(0x03, "sdio0", "ledctrl"),
+		MPP_FUNCTION(0x04, "twsi", "sck")),
+	MPP_MODE(20,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x01, "ac97", "sysclko"),
+		MPP_FUNCTION(0x02, "lcd-spi", "miso"),
+		MPP_FUNCTION(0x03, "sdio1", "cd"),
+		MPP_FUNCTION(0x05, "sdio0", "cd"),
+		MPP_FUNCTION(0x06, "spi1", "miso")),
+	MPP_MODE(21,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x01, "uart1", "rts"),
+		MPP_FUNCTION(0x02, "lcd-spi", "cs0"),
+		MPP_FUNCTION(0x03, "sdio1", "wp"),
+		MPP_FUNCTION(0x04, "ssp", "sfrm"),
+		MPP_FUNCTION(0x05, "sdio0", "wp"),
+		MPP_FUNCTION(0x06, "spi1", "cs")),
+	MPP_MODE(22,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x01, "uart1", "cts"),
+		MPP_FUNCTION(0x02, "lcd-spi", "mosi"),
+		MPP_FUNCTION(0x03, "sdio1", "buspwr"),
+		MPP_FUNCTION(0x04, "ssp", "txd"),
+		MPP_FUNCTION(0x05, "sdio0", "buspwr"),
+		MPP_FUNCTION(0x06, "spi1", "mosi")),
+	MPP_MODE(23,
+		MPP_FUNCTION(0x00, "gpio", NULL),
+		MPP_FUNCTION(0x02, "lcd-spi", "sck"),
+		MPP_FUNCTION(0x03, "sdio1", "ledctrl"),
+		MPP_FUNCTION(0x04, "ssp", "sclk"),
+		MPP_FUNCTION(0x05, "sdio0", "ledctrl"),
+		MPP_FUNCTION(0x06, "spi1", "sck")),
+	MPP_MODE(24,
+		MPP_FUNCTION(0x00, "camera", NULL),
+		MPP_FUNCTION(0x01, "gpio", NULL)),
+	MPP_MODE(40,
+		MPP_FUNCTION(0x00, "sdio0", NULL),
+		MPP_FUNCTION(0x01, "gpio", NULL)),
+	MPP_MODE(46,
+		MPP_FUNCTION(0x00, "sdio1", NULL),
+		MPP_FUNCTION(0x01, "gpio", NULL)),
+	MPP_MODE(52,
+		MPP_FUNCTION(0x00, "i2s1/spdifo", NULL),
+		MPP_FUNCTION(0x02, "i2s1", NULL),
+		MPP_FUNCTION(0x08, "spdifo", NULL),
+		MPP_FUNCTION(0x0a, "gpio", NULL),
+		MPP_FUNCTION(0x0b, "twsi", NULL),
+		MPP_FUNCTION(0x0c, "ssp/spdifo", NULL),
+		MPP_FUNCTION(0x0e, "ssp", NULL),
+		MPP_FUNCTION(0x0f, "ssp/twsi", NULL)),
+	MPP_MODE(58,
+		MPP_FUNCTION(0x00, "spi0", NULL),
+		MPP_FUNCTION(0x01, "gpio", NULL)),
+	MPP_MODE(62,
+		MPP_FUNCTION(0x00, "uart1", NULL),
+		MPP_FUNCTION(0x01, "gpio", NULL)),
+	MPP_MODE(64,
+		MPP_FUNCTION(0x00, "nand", NULL),
+		MPP_FUNCTION(0x01, "gpo", NULL)),
+	MPP_MODE(72,
+		MPP_FUNCTION(0x00, "i2s", NULL),
+		MPP_FUNCTION(0x01, "ac97", NULL)),
+	MPP_MODE(73,
+		MPP_FUNCTION(0x00, "none", NULL),
+		MPP_FUNCTION(0x01, "opt1", NULL),
+		MPP_FUNCTION(0x02, "opt2", NULL),
+		MPP_FUNCTION(0x03, "opt3", NULL)),
+};
+
+static struct pinctrl_gpio_range dove_mpp_gpio_ranges[] = {
+	MPP_GPIO_RANGE(0,  0,  0, 32),
+	MPP_GPIO_RANGE(1, 32, 32, 32),
+	MPP_GPIO_RANGE(2, 64, 64,  8),
+};
+
+static struct mvebu_pinctrl_soc_info dove_pinctrl_info = {
+	.controls = dove_mpp_controls,
+	.ncontrols = ARRAY_SIZE(dove_mpp_controls),
+	.modes = dove_mpp_modes,
+	.nmodes = ARRAY_SIZE(dove_mpp_modes),
+	.gpioranges = dove_mpp_gpio_ranges,
+	.ngpioranges = ARRAY_SIZE(dove_mpp_gpio_ranges),
+	.variant = 0,
+};
+
+static struct clk *clk;
+
+static struct of_device_id dove_pinctrl_of_match[] __devinitdata = {
+	{ .compatible = "marvell,dove-pinctrl", .data = &dove_pinctrl_info },
+	{ }
+};
+
+static int __devinit dove_pinctrl_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *match =
+		of_match_device(dove_pinctrl_of_match, &pdev->dev);
+
+	if (match)
+		pdev->dev.platform_data = match->data;
+
+	/*
+	 * General MPP Configuration Register is part of pdma registers.
+	 * grab clk to make sure it is ticking.
+	 */
+	clk = devm_clk_get(&pdev->dev, NULL);
+	if (!IS_ERR(clk))
+		clk_prepare_enable(clk);
+
+	return mvebu_pinctrl_probe(pdev);
+}
+
+static int __devexit dove_pinctrl_remove(struct platform_device *pdev)
+{
+	int ret;
+
+	ret = mvebu_pinctrl_remove(pdev);
+	if (!IS_ERR(clk))
+		clk_disable_unprepare(clk);
+	return ret;
+}
+
+static struct platform_driver dove_pinctrl_driver = {
+	.driver = {
+		.name = "dove-pinctrl",
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(dove_pinctrl_of_match),
+	},
+	.probe = dove_pinctrl_probe,
+	.remove = __devexit_p(dove_pinctrl_remove),
+};
+
+module_platform_driver(dove_pinctrl_driver);
+
+MODULE_AUTHOR("Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>");
+MODULE_DESCRIPTION("Marvell Dove pinctrl driver");
+MODULE_LICENSE("GPL v2");
-- 
1.7.10.4

[PATCH v3 9/9] ARM: mvebu: adjust Armada XP evaluation board DTS

From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: 2012-09-10 08:40:31

From: Thomas Petazzoni <redacted>

The Armada XP evaluation board is based on the MV78460 Armava XP
SoC. Now that we have separate .dtsi files for the three different
SoCs of the Armada XP family, use the appropriate one as include for
the Armada XP evaluation board .dts file.

Signed-off-by: Thomas Petazzoni <redacted>
Acked-by: Linus Walleij <redacted>
---
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Thomas Petazzoni <redacted>
Cc: Grant Likely <redacted>
Cc: Rob Herring <redacted>
Cc: Rob Landley <redacted>
Cc: Russell King <redacted>
Cc: Lior Amsalem <redacted>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Jason Cooper <redacted>
Cc: Gregory CLEMENT <redacted>
Cc: Ben Dooks <redacted>
Cc: Linus Walleij <redacted>
Cc: Stephen Warren <redacted>
Cc: devicetree-discuss at lists.ozlabs.org
Cc: linux-doc at vger.kernel.org
Cc: linux-kernel at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
---
 arch/arm/boot/dts/armada-xp-db.dts |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
index f97040d..b1fc728 100644
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ b/arch/arm/boot/dts/armada-xp-db.dts
@@ -14,11 +14,11 @@
  */
 
 /dts-v1/;
-/include/ "armada-xp.dtsi"
+/include/ "armada-xp-mv78460.dtsi"
 
 / {
 	model = "Marvell Armada XP Evaluation Board";
-	compatible = "marvell,axp-db", "marvell,armadaxp", "marvell,armada-370-xp";
+	compatible = "marvell,axp-db", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
 
 	chosen {
 		bootargs = "console=ttyS0,115200 earlyprintk";
-- 
1.7.10.4

[PATCH v3 8/9] ARM: mvebu: Add pinctrl support to Armada 370 SoC

From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: 2012-09-10 08:41:16

From: Thomas Petazzoni <redacted>

This commits adds the necessary device tree information to define the
compatible property for the pinctrl driver instance of Armada 370 SoC.

Signed-off-by: Thomas Petazzoni <redacted>
Acked-by: Linus Walleij <redacted>
---
v3:
- cleaned whitespaces

Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Thomas Petazzoni <redacted>
Cc: Grant Likely <redacted>
Cc: Rob Herring <redacted>
Cc: Rob Landley <redacted>
Cc: Russell King <redacted>
Cc: Lior Amsalem <redacted>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Jason Cooper <redacted>
Cc: Gregory CLEMENT <redacted>
Cc: Ben Dooks <redacted>
Cc: Linus Walleij <redacted>
Cc: Stephen Warren <redacted>
Cc: devicetree-discuss at lists.ozlabs.org
Cc: linux-doc at vger.kernel.org
Cc: linux-kernel at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
---
 arch/arm/boot/dts/armada-370.dtsi |    4 ++++
 1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 3228ccc..b71ab9b 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -31,5 +31,9 @@
 				compatible = "marvell,armada-370-xp-system-controller";
 				reg = <0xd0018200 0x100>;
 		};
+
+		pinctrl at d0018000 {
+			compatible = "marvell,mv88f6710-pinctrl";
+		};
 	};
 };
-- 
1.7.10.4

[PATCH v3 7/9] ARM: mvebu: Add pinctrl support to Armada XP SoCs

From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: 2012-09-10 08:41:41

From: Thomas Petazzoni <redacted>

This commits adds the necessary device tree information to define the
compatible property for the pinctrl driver instance of Armada XP SoCs.

Until now, the device tree representation considered the Armada XP as
a single SoC. But in fact, there are three different SoCs in the
Armada XP families, with different number of CPU cores, different
number of Ethernet interfaces... and different number of muxable pins
or functions. We therefore introduce three armada-xp-mv78xx0.dtsi for
the three SoCs of the Armada XP family. The current armada-xp-db.dts
evaluation board uses the MV78460 variant of the SoC.

Signed-off-by: Thomas Petazzoni <redacted>
Acked-by: Linus Walleij <redacted>
---
v3:
- put specific variant into DT "model"

Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Thomas Petazzoni <redacted>
Cc: Grant Likely <redacted>
Cc: Rob Herring <redacted>
Cc: Rob Landley <redacted>
Cc: Russell King <redacted>
Cc: Lior Amsalem <redacted>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Jason Cooper <redacted>
Cc: Gregory CLEMENT <redacted>
Cc: Ben Dooks <redacted>
Cc: Linus Walleij <redacted>
Cc: Stephen Warren <redacted>
Cc: devicetree-discuss at lists.ozlabs.org
Cc: linux-doc at vger.kernel.org
Cc: linux-kernel at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
---
 arch/arm/boot/dts/armada-xp-mv78230.dtsi |   27 +++++++++++++++++++++++++++
 arch/arm/boot/dts/armada-xp-mv78260.dtsi |   27 +++++++++++++++++++++++++++
 arch/arm/boot/dts/armada-xp-mv78460.dtsi |   27 +++++++++++++++++++++++++++
 3 files changed, 81 insertions(+)
 create mode 100644 arch/arm/boot/dts/armada-xp-mv78230.dtsi
 create mode 100644 arch/arm/boot/dts/armada-xp-mv78260.dtsi
 create mode 100644 arch/arm/boot/dts/armada-xp-mv78460.dtsi
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
new file mode 100644
index 0000000..8bdcd43
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -0,0 +1,27 @@
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Contains definitions specific to the Armada XP MV78230 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+/include/ "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP MV78230 SoC";
+	compatible = "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	soc {
+		pinctrl at d0018000 {
+			compatible = "marvell,mv78230-pinctrl";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
new file mode 100644
index 0000000..e5c108b
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -0,0 +1,27 @@
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Contains definitions specific to the Armada XP MV78260 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+/include/ "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP MV78260 SoC";
+	compatible = "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	soc {
+		pinctrl at d0018000 {
+			compatible = "marvell,mv78260-pinctrl";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
new file mode 100644
index 0000000..22e7fdd
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -0,0 +1,27 @@
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Contains definitions specific to the Armada XP MV78460 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+/include/ "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP MV78460 SoC";
+	compatible = "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	soc {
+		pinctrl at d0018000 {
+			compatible = "marvell,mv78460-pinctrl";
+		};
+	};
+ };
-- 
1.7.10.4
Next 75 of 77 remaining
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help