This is a series of 7 patches that add basic support for booting PXA3xx
boards from devicetrees. I'm able to mount a rootfs and use all
irq/gpio based functions as well as the NAND, USB and RTC drivers.

There are some major pieces left to work on though:

 - the pinctrl driver
 - the pxafb driver
 - the ssp/audio implementations

Is somebody working on any of these?


Let me know what you think.

Daniel Mack (7):
  RTC: add DT bindings to pxa-rtc
  MMC: pxa-mci: add DT bindings
  MTD: pxa3xx-nand: add devicetree bindings
  ARM: pxa: add devicetree code for irq handling
  ARM: pxa3xx: skip default device initialization when booting via DT
  ARM: pxa3xx: add generic DT machine code
  ARM: pxa: add .dtsi files

 Documentation/devicetree/bindings/mmc/pxa-mmc.txt  |   24 ++++
 .../devicetree/bindings/mtd/pxa3xx-nand.txt        |   31 +++++
 Documentation/devicetree/bindings/rtc/pxa-rtc.txt  |   12 ++
 arch/arm/boot/dts/pxa2xx.dtsi                      |  132 ++++++++++++++++++++
 arch/arm/boot/dts/pxa3xx.dtsi                      |   26 ++++
 arch/arm/mach-pxa/Kconfig                          |   12 ++
 arch/arm/mach-pxa/Makefile                         |    3 +
 arch/arm/mach-pxa/irq.c                            |   73 +++++++++++
 arch/arm/mach-pxa/pxa-dt.c                         |   61 +++++++++
 arch/arm/mach-pxa/pxa3xx.c                         |   21 +++-
 drivers/mmc/host/pxamci.c                          |   50 ++++++++
 drivers/mtd/nand/pxa3xx_nand.c                     |   83 +++++++++---
 drivers/rtc/rtc-pxa.c                              |   11 ++
 13 files changed, 522 insertions(+), 17 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mmc/pxa-mmc.txt
 create mode 100644 Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt
 create mode 100644 Documentation/devicetree/bindings/rtc/pxa-rtc.txt
 create mode 100644 arch/arm/boot/dts/pxa2xx.dtsi
 create mode 100644 arch/arm/boot/dts/pxa3xx.dtsi
 create mode 100644 arch/arm/mach-pxa/pxa-dt.c

-- 
1.7.10.4