On Fri, Jul 13, 2012 at 02:25:45PM +0200, Michael Grzeschik wrote:

On Thu, Jul 12, 2012 at 03:01:52PM +0800, Richard Zhao wrote:

quoted

i.MX usb controllers shares non-core registers, which may include
SoC specific controls. We take it as a usbmisc device and usbmisc
driver export functions needed by ci13xxx_imx driver.

So this is SoC and not chipidea specific and should not be sorted into
this subdir.

Yes, but it's usb specific and serve chipidea usb IP.

quoted

For example, Sabrelite board has bad over-current design, we can
usbmisc to disable over-current detect.

This driver layout is also reflected in:

arch/arm/mach-imx/ehci-imx*.c

It sounds sensible, but I'm not quite sure. I saw drivers are moving
out of there, event it's SoC specific, for example, clk, pinmux. And
the non-core registers might not only be setup onetime on boot, but
be called at runtime by usb driver. For now, it's set once.

You should use these existing mx*_initialize_usb_hw functions to avoid
code duplication

I can not see what duplication it can avoid.

and add your mx6_initialize_usb_hw routine for mx6 there.

Maybe.

This devicetree based glue code in this file can be reused to
call the right mx*_initialize_usb_hw by the compatible.

The glue code makes it more like a normal driver. Doesn't it?

We already have common flags available like i.e. MXC_EHCI_POWER_PINS_ENABLED
which is currently used to disable overcurrent detection.

The flags may be replace with properties in DT bindings.

quoted

Signed-off-by: Richard Zhao <redacted>
---
 .../devicetree/bindings/usb/imx-usbmisc.txt        |   15 ++
 drivers/usb/chipidea/Makefile                      |    2 +-
 drivers/usb/chipidea/ci13xxx_imx.c                 |    4 +
 drivers/usb/chipidea/imx_usbmisc.c                 |  144 ++++++++++++++++++++
 4 files changed, 164 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/usb/imx-usbmisc.txt
 create mode 100644 drivers/usb/chipidea/imx_usbmisc.c

diff --git a/Documentation/devicetree/bindings/usb/imx-usbmisc.txt b/Documentation/devicetree/bindings/usb/imx-usbmisc.txt
new file mode 100644
index 0000000..09f01ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/imx-usbmisc.txt

@@ -0,0 +1,15 @@
+* Freescale i.MX non-core registers
+
+Required properties:
+- compatible: Should be "fsl,imx6q-usbmisc"
+- reg: Should contain registers location and length
+
+Optional properties:
+- fsl,disable-over-current: disable over current detect
+
+Examples:
+usbmisc at 02184800 {
+	compatible = "fsl,imx6q-usbmisc";
+	reg = <0x02184800 0x200>;
+	fsl,disable-over-current;
+};

diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile
index 3f56b76..46fc31c 100644
--- a/drivers/usb/chipidea/Makefile
+++ b/drivers/usb/chipidea/Makefile

@@ -17,5 +17,5 @@ ifneq ($(CONFIG_PCI),)
 endif
 
 ifneq ($(CONFIG_OF_DEVICE),)
-	obj-$(CONFIG_USB_CHIPIDEA)	+= ci13xxx_imx.o
+	obj-$(CONFIG_USB_CHIPIDEA)	+= ci13xxx_imx.o imx_usbmisc.o
 endif

diff --git a/drivers/usb/chipidea/ci13xxx_imx.c b/drivers/usb/chipidea/ci13xxx_imx.c
index b3173d8..dd7f3a3 100644
--- a/drivers/usb/chipidea/ci13xxx_imx.c
+++ b/drivers/usb/chipidea/ci13xxx_imx.c

@@ -24,6 +24,8 @@
 
 #include "ci.h"
 
+int imx_usbmisc_init(struct device *usbdev);
+
 #define pdev_to_phy(pdev) \
 	((struct usb_phy *)platform_get_drvdata(pdev))
 #define ci_to_imx_data(ci) \

@@ -142,6 +144,8 @@ static int __devinit ci13xxx_imx_probe(struct platform_device *pdev)
 		dma_set_coherent_mask(&pdev->dev, *pdev->dev.dma_mask);
 	}
 
+	imx_usbmisc_init(&pdev->dev);
+
 	platform_set_drvdata(pdev, data);
 
 	plat_ci = ci13xxx_add_device(&pdev->dev,

diff --git a/drivers/usb/chipidea/imx_usbmisc.c b/drivers/usb/chipidea/imx_usbmisc.c
new file mode 100644
index 0000000..33a8ec0
--- /dev/null
+++ b/drivers/usb/chipidea/imx_usbmisc.c

@@ -0,0 +1,144 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <asm/io.h>
+
+struct usbmisc;
+
+struct soc_data {
+	int (*init) (struct usbmisc *usbmisc, int id);
+	void (*exit) (struct usbmisc *usbmisc, int id);
+};
+
+struct usbmisc {
+	struct soc_data *soc_data;
+	void __iomem *base;
+	struct clk *clk;
+
+	int dis_oc:1;
+};
+
+/* Since we only have one usbmisc device at runtime, we global variables */
+static struct usbmisc *usbmisc;

Global variable?

Yes. we only have one usbmisc.

quoted

+
+static int imx6q_usbmisc_init(struct usbmisc *usbmisc, int id)

What is initialized here? How about "preconfigure"?
Even better is to reuse mx*_initialize_usb_hw here.

It's used to call by ci13xxx_imx driver.

quoted

+{
+	u32 reg;
+
+	if (usbmisc->dis_oc) {
+		reg = readl_relaxed(usbmisc->base + id * 4);
+		writel_relaxed(reg | (1 << 7), usbmisc->base + id * 4);

#define IMX6_OTG_CTRL_USBMISC        1 << 7

yes.

quoted

+	}
+
+	return 0;
+}
+
+static struct soc_data imx6q_data = {
+	.init = imx6q_usbmisc_init,
+};
+
+
+static const struct of_device_id imx_usbmisc_dt_ids[] = {
+	{ .compatible = "fsl,imx6q-usbmisc", .data = &imx6q_data },

        something like this:
	{ .compatible = "fsl,imx6q-usbmisc", .data = &mx6_initialize_usb_hw },

It's designed not only used when initialization.

quoted

+	{ /* sentinel */ }
+};
+
+static int __devinit imx_usbmisc_probe(struct platform_device *pdev)
+{
+	struct resource	*res;
+	struct usbmisc *data;
+	const struct of_device_id *of_id =
+			of_match_device(imx_usbmisc_dt_ids, &pdev->dev);
+
+	int ret;
+
+	if (usbmisc)
+		return -EBUSY;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	data->base = devm_request_and_ioremap(&pdev->dev, res);
+	if (!data->base)
+		return -EADDRNOTAVAIL;
+
+	data->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(data->clk)) {
+		dev_err(&pdev->dev,
+			"failed to get clock, err=%ld\n", PTR_ERR(data->clk));
+		return PTR_ERR(data->clk);
+	}
+
+	ret = clk_prepare_enable(data->clk);
+	if (!ret) {

Better:
        if (ret)
                return ret;

To me, it does not make much difference.

quoted

+		if (of_find_property(pdev->dev.of_node,
+			"fsl,disable-over-current", NULL))
+			data->dis_oc = 1;
+		data->soc_data = of_id->data;
+		usbmisc = data;
+	}
+

        if (of_find_property(pdev->dev.of_node,
        ...

quoted

+	return ret;
+}
+
+static int __devexit imx_usbmisc_remove(struct platform_device *pdev)
+{
+	clk_disable_unprepare(usbmisc->clk);
+	return 0;
+}
+
+static struct platform_driver imx_usbmisc_driver = {
+	.probe = imx_usbmisc_probe,
+	.remove = __devexit_p(imx_usbmisc_remove),
+	.driver = {
+		.name = "imx_usbmisc",
+		.owner = THIS_MODULE,
+		.of_match_table = imx_usbmisc_dt_ids,
+	 },
+};
+
+int imx_usbmisc_init(struct device *usbdev)
+{
+	struct device_node *np = usbdev->of_node;
+	int ret;
+
+	if (!usbmisc)
+		return 0;
+
+	ret = of_alias_get_id(np, "usb");
+	if (ret < 0) {
+		dev_err(usbdev, "failed to get alias id, errno %d\n", ret);
+		return ret;
+	}
+
+	return usbmisc->soc_data->init(usbmisc, ret);
+}
+EXPORT_SYMBOL_GPL(imx_usbmisc_init);

EXPORT_SYMBOL is only needed because it is
compliled as an extra kernel module.

ci13xxx_imx may be module.

Thanks
Richard

quoted

+
+static int __init imx_usbmisc_drv_init(void)
+{
+	return platform_driver_register(&imx_usbmisc_driver);
+}
+subsys_initcall(imx_usbmisc_drv_init);
+
+static void __exit imx_usbmisc_drv_exit(void)
+{
+	platform_driver_unregister(&imx_usbmisc_driver);
+}
+module_exit(imx_usbmisc_drv_exit);
+
+MODULE_LICENSE("GPL v2");
-- 
1.7.9.5

Thanks,
Michael

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html