[PATCH 3/7] ARM: mxs: convert m28evk board to device tree

From: Marek Vasut <marex@denx.de>

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <redacted>
---
 arch/arm/boot/dts/imx28.dtsi |   21 ++++
 arch/arm/boot/dts/m28evk.dts |  241
++++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-mxs/mach-mxs.c | 
 30 +++++
 3 files changed, 292 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/boot/dts/m28evk.dts

diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 02e778b..3390607 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi

@@ -232,6 +232,17 @@
 					fsl,pull-up = <0>;
 				};

+				auart0_2pins_a: auart0-2pins at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x3000 /* 

+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
 				auart3_pins_a: auart3 at 0 {
 					reg = <0>;
 					fsl,pinmux-ids = <

@@ -373,6 +384,16 @@
 					fsl,pull-up = <0>;
 				};

+				pwm3_pins_a: pwm3 at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x31c0 /* MX28_PAD_PWM3__PWM_3 

+
 				lcdif_24bit_pins_a: lcdif-24bit at 0 {
 					reg = <0>;
 					fsl,pinmux-ids = <

diff --git a/arch/arm/boot/dts/m28evk.dts b/arch/arm/boot/dts/m28evk.dts
new file mode 100644
index 0000000..0c22792
--- /dev/null
+++ b/arch/arm/boot/dts/m28evk.dts

@@ -0,0 +1,241 @@
+/*
+ * Copyright (C) 2012 Marek Vasut <marex@denx.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx28.dtsi"
+
+/ {
+	model = "DENX M28EVK";
+	compatible = "denx,m28evk", "fsl,imx28";
+
+	memory {
+		reg = <0x40000000 0x08000000>;
+	};
+
+	apb at 80000000 {
+		apbh at 80000000 {
+			gpmi-nand at 8000c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+				status = "okay";
+
+				partition at 0 {
+					label = "bootloader";
+					reg = <0x00000000 0x00300000>;
+					read-only;
+				};
+
+				partition at 1 {
+					label = "environment";
+					reg = <0x00300000 0x00080000>;
+				};
+
+				partition at 2 {
+					label = "redundant-environment";
+					reg = <0x00380000 0x00080000>;
+				};
+
+				partition at 3 {
+					label = "kernel";
+					reg = <0x00400000 0x00400000>;
+				};
+
+				partition at 4 {
+					label = "filesystem";
+					reg = <0x00800000 0x0f800000>;
+				};
+			};
+
+			ssp0: ssp at 80010000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_8bit_pins_a
+					     &mmc0_cd_cfg
+					     &mmc0_sck_cfg>;
+				bus-width = <8>;
+				wp-gpios = <&gpio3 10 1>;
+				status = "okay";
+			};
+
+			pinctrl at 80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog-gpios at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x30a3 /* 

+		compatible = "pwm-backlight";
+		pwms = <&pwm 3 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+};

diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 7bbb961..6bb6db8 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c

@@ -59,6 +59,23 @@ static struct fb_videomode mx28evk_video_modes[] = {
 	},
 };

+static struct fb_videomode m28evk_video_modes[] = {
+	{
+		.name		= "Ampire AM-800480R2TMQW-T01H",
+		.refresh	= 60,
+		.xres		= 800,
+		.yres		= 480,
+		.pixclock	= 30066, /* picosecond (33.26 MHz) */
+		.left_margin	= 0,
+		.right_margin	= 256,
+		.upper_margin	= 0,
+		.lower_margin	= 45,
+		.hsync_len	= 1,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_DATA_ENABLE_HIGH_ACT,
+	},
+};
+
 static struct mxsfb_platform_data mxsfb_pdata __initdata;

 static struct of_dev_auxdata mxs_auxdata_lookup[] __initdata = {

@@ -203,12 +220,24 @@ static void __init imx28_evk_init(void)
 	mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
 }

+static void __init m28evk_init(void)
+{
+	update_fec_mac_prop(OUI_DENX);
+
+	mxsfb_pdata.mode_list = m28evk_video_modes;
+	mxsfb_pdata.mode_count = ARRAY_SIZE(m28evk_video_modes);
+	mxsfb_pdata.default_bpp = 16;
+	mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT;
+}
+
 static void __init mxs_machine_init(void)
 {
 	if (of_machine_is_compatible("fsl,imx28-evk"))
 		imx28_evk_init();
 	else if (of_machine_is_compatible("fsl,imx23-evk"))
 		imx23_evk_init();
+	else if (of_machine_is_compatible("denx,m28evk"))
+		m28evk_init();

 	of_platform_populate(NULL, of_default_bus_match_table,
 			     mxs_auxdata_lookup, NULL);

@@ -223,6 +252,7 @@ static const char *imx23_dt_compat[] __initdata = {

 static const char *imx28_dt_compat[] __initdata = {
 	"crystalfontz,cfa10036",
+	"denx,m28evk",
 	"fsl,imx28-evk",
 	"fsl,imx28",
 	NULL,