[PATCH 2/3] ARM: OMAP: hwmod: revise deassert sequence
From: Omar Ramirez Luna <hidden>
Date: 2012-07-16 19:21:51
Also in:
linux-omap, lkml
Subsystem:
arm port, omap hwmod support, omap2+ support, the rest · Maintainers:
Russell King, Paul Walmsley, Aaro Koskinen, Andreas Kemnade, Kevin Hilman, Roger Quadros, Tony Lindgren, Linus Torvalds
For a reset sequence to complete cleanly, a module needs its associated clocks to be enabled, otherwise the timeout check in prcm code can print a false failure (failed to hardreset) that occurs because the clocks aren't powered ON and the status bit checked can't transition without them. Signed-off-by: Omar Ramirez Luna <redacted> --- arch/arm/mach-omap2/omap_hwmod.c | 33 +++++++++++++++++++++++++++++++++ 1 files changed, 33 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 091c199..f6f8d99 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c@@ -1509,6 +1509,7 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name) { struct omap_hwmod_rst_info ohri; int ret = -EINVAL; + int hwsup = 0; if (!oh) return -EINVAL;
@@ -1520,10 +1521,42 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name) if (IS_ERR_VALUE(ret)) return ret; + if (oh->clkdm) { + /* + * A clockdomain must be in SW_SUP otherwise reset + * might not be completed. The clockdomain can be set + * in HW_AUTO only when the module become ready. + */ + hwsup = clkdm_in_hwsup(oh->clkdm); + ret = clkdm_hwmod_enable(oh->clkdm, oh); + if (ret) { + WARN(1, "omap_hwmod: %s: could not enable clockdomain %s: %d\n", + oh->name, oh->clkdm->name, ret); + return ret; + } + } + + _enable_clocks(oh); + ret = soc_ops.deassert_hardreset(oh, &ohri); + + _disable_clocks(oh); + if (ret == -EBUSY) pr_warning("omap_hwmod: %s: failed to hardreset\n", oh->name); + if (!ret) { + /* + * Set the clockdomain to HW_AUTO, assuming that the + * previous state was HW_AUTO. + */ + if (oh->clkdm && hwsup) + clkdm_allow_idle(oh->clkdm); + } else { + if (oh->clkdm) + clkdm_hwmod_disable(oh->clkdm, oh); + } + return ret; }
--
1.7.4.1