[PATCH 5/8] ARM: kgdb_fiq: Implement knocking into KDB via escape command
From: Anton Vorontsov <hidden>
Date: 2012-07-13 10:19:22
Also in:
lkml
Subsystem:
arm port, the rest · Maintainers:
Russell King, Linus Torvalds
As Colin Cross noticed, serial ports could be noisy, so occasional characters once in a while are possible. So, considering the noise possibility, entering the debugger on any received byte is unacceptable for production devices. This changes KGDB FIQ behaviour in a such way so that we have to type the GDB-protocol "$3#33" command to actually enter the debugger, the kernel will print the following prompt: Type $3#33 to enter the debugger. This is the exactly the same command we use to escape from KGDB to KDB, so it should be all pretty familiar. For convenience, there is a kgdb_fiq.knock kernel command line option, when set to 0, this turns the special command to just a return key press, so the kernel will be printing this: Hit <return> to enter the debugger. Suggested-by: Colin Cross <redacted> Signed-off-by: Anton Vorontsov <redacted> --- arch/arm/kernel/kgdb_fiq.c | 48 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+)
diff --git a/arch/arm/kernel/kgdb_fiq.c b/arch/arm/kernel/kgdb_fiq.c
index 7ec9979..5308697 100644
--- a/arch/arm/kernel/kgdb_fiq.c
+++ b/arch/arm/kernel/kgdb_fiq.c@@ -17,6 +17,7 @@ #include <linux/init.h> #include <linux/slab.h> #include <linux/hardirq.h> +#include <linux/kdb.h> #include <linux/kgdb.h> #include <asm/fiq.h> #include <asm/exception.h>
@@ -25,6 +26,51 @@ static int kgdb_fiq_enabled; module_param_named(enable, kgdb_fiq_enabled, int, 0600); MODULE_PARM_DESC(enable, "set to 1 to enable FIQ KGDB"); +static bool kgdb_fiq_knock = 1; +module_param_named(knock, kgdb_fiq_knock, bool, 0600); +MODULE_PARM_DESC(knock, "'$3#33' command must be used to enter the debugger"); + +/* + * "Serial ports are often noisy, especially when muxed over another port (we + * often use serial over the headset connector). Noise on the async command + * line just causes characters that are ignored, on a command line that blocked + * execution noise would be catastrophic." -- Colin Cross + * + * So, this small function implements KGDB/KDB knocking on the serial line: we + * won't enter the debugger until we receive a known magic phrase (which is + * actually "$3#33", known as "escape to KDB" command. If knocking is disabled, + * just pressing the return key is enough to enter the debugger. + */ +static bool kgdb_fiq_poll_knock(void) +{ + static int n; + int c = -1; + get_char_func *getc; + const char *magic = "$3#33"; + size_t m = strlen(magic); + + for (getc = &kdb_poll_funcs[0]; *getc; ++getc) { + c = (*getc)(); + if (c >= 0) + break; + } + + if (!kgdb_fiq_knock && (c == '\r' || c == '\n')) { + return 1; + } else if (c == magic[n]) { + kdb_printf("%c", c); + n = (n + 1) % m; + if (!n) + return 1; + } else { + n = 0; + kdb_printf("\n%s %s to enter the debugger.\n", + kgdb_fiq_knock ? "Type" : "Hit", + kgdb_fiq_knock ? magic : "<return>"); + } + return 0; +} + static unsigned int kgdb_fiq; static void (*kgdb_enable_fiq)(unsigned int irq, bool on); static bool (*is_kgdb_fiq)(unsigned int irq);
@@ -33,6 +79,8 @@ asmlinkage void __exception_irq_entry kgdb_fiq_do_handle(struct pt_regs *regs) { if (!is_kgdb_fiq(kgdb_fiq)) return; + if (!kgdb_fiq_poll_knock()) + return; nmi_enter(); kgdb_handle_exception(1, 0, 0, regs);
--
1.7.10.4