From: Philippe R?tornaz <redacted>

This fix the SPI regmap configuration, the wrong write flag was used.
Also, bits_per_word should not be set as the regmap spi implementation
uses a 8bits transfert granularity.

Reviewed-by: Mark Brown <redacted>
Acked-by: Marc Reilly <redacted>
Signed-off-by: Philippe R?tornaz <redacted>
Signed-off-by: Samuel Ortiz <redacted>
Origin: next-20120712, commit:e4ecf6ea84d68aea5a9785e89f52672e1e126998
Signed-off-by: Uwe Kleine-K?nig <redacted>
---
 drivers/mfd/mc13xxx-spi.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mfd/mc13xxx-spi.c b/drivers/mfd/mc13xxx-spi.c
index 3fcdab3..5d1969f 100644
--- a/drivers/mfd/mc13xxx-spi.c
+++ b/drivers/mfd/mc13xxx-spi.c

@@ -49,6 +49,7 @@ static struct regmap_config mc13xxx_regmap_spi_config = {
 	.reg_bits = 7,
 	.pad_bits = 1,
 	.val_bits = 24,
+	.write_flag_mask = 0x80,
 
 	.max_register = MC13XXX_NUMREGS,
 

@@ -73,7 +74,6 @@ static int mc13xxx_spi_probe(struct spi_device *spi)
 
 	dev_set_drvdata(&spi->dev, mc13xxx);
 	spi->mode = SPI_MODE_0 | SPI_CS_HIGH;
-	spi->bits_per_word = 32;
 
 	mc13xxx->dev = &spi->dev;
 	mutex_init(&mc13xxx->lock);

-- 
1.7.10.4