[PATCH v1 08/11] arm/dts: Add twl4030-usb data
From: Rajendra Nayak <hidden>
Date: 2012-07-10 06:13:41
Also in:
linux-devicetree, linux-omap, lkml
On Thursday 28 June 2012 05:21 PM, Kishon Vijay Abraham I wrote:
quoted hunk ↗ jump to hunk
Add twl4030-usb data node in twl4030 device tree file. Signed-off-by: Kishon Vijay Abraham I<redacted> --- arch/arm/boot/dts/twl4030.dtsi | 21 +++++++++++++++++++++ 1 files changed, 21 insertions(+), 0 deletions(-)diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi index 22f4d13..66534a3 100644 --- a/arch/arm/boot/dts/twl4030.dtsi +++ b/arch/arm/boot/dts/twl4030.dtsi@@ -37,6 +37,18 @@ regulator-max-microvolt =<3150000>; }; + vusb1v5: regulator at 3 { + compatible = "ti,twl4030-vusb1v5"; + };
These @3, @4 are actually wrong since the node do not have a 'reg' property in it. This was commented on by David Brown on my original series which added this but it somehow slipped through the cracks. I understand that you would have looked up what existed in the file and extended, but what already exists in the file needs to be fixed up too. I'll send in a patch to fix those up. regards, Rajendra
quoted hunk ↗ jump to hunk
+ + vusb1v8: regulator at 4 { + compatible = "ti,twl4030-vusb1v8"; + }; + + vusb3v1: regulator at 5 { + compatible = "ti,twl4030-vusb3v1"; + }; + twl_gpio: gpio { compatible = "ti,twl4030-gpio"; gpio-controller;@@ -44,4 +56,13 @@ interrupt-controller; #interrupt-cells =<1>; }; + + twl4030-usb { + compatible = "ti,twl4030-usb"; + interrupts =< 10 4>; + usb1v5-supply =<&vusb1v5>; + usb1v8-supply =<&vusb1v8>; + usb3v1-supply =<&vusb3v1>; + usb_mode =<1>; + }; };