Hi,

Gentle remainder to this patch series.

On Fri, Jun 22, 2012 at 15:10:46, AnilKumar, Chimata wrote:

This patch series add device tree support for AM33XX SoC family.

Initialy Hiremath Vaibhav submitted a patch for AM33XX devices
based on omap3 family. Details at
http://marc.info/?t=132687107200002&r=1&w=2

AM33XX family is varied from omap3 family in these aspects
like memory maps, peripheral base addresses and configuration
parameters. In some cases we have to use a mix of omap3 and
omap4 parameters. So a seperate am33xx.dtsi file is created
for all the devices comes under am33xx family and revert of
above patch is required.

Two sepearte device tree source files are created (am335x-evm.dts
and am335x-bone.dts) to add support for AM335X EVM and BeagleBone
boards.

Linux booting is tested on AM335X-EVM and BeagleBone boards.

AnilKumar Ch (4):
  Revert "arm/dts: Add support for TI AM335x EVM board"
  arm/dts: Add initial DT support for AM33XX SoC family
  arm/dts: Add support for AM335x EVM
  arm/dts: Add support for AM335x BeagleBone

 .../devicetree/bindings/arm/omap/omap.txt          |    3 +
 arch/arm/boot/dts/am335x-bone.dts                  |   20 +++
 arch/arm/boot/dts/am335x-evm.dts                   |   25 +--
 arch/arm/boot/dts/am33xx.dtsi                      |  189 ++++++++++++++++++++
 4 files changed, 215 insertions(+), 22 deletions(-)
 create mode 100644 arch/arm/boot/dts/am335x-bone.dts
 create mode 100644 arch/arm/boot/dts/am33xx.dtsi

-- 
1.7.9.5

Thanks
AnilKumar