[PATCH 2/3] net: fec: enable regulator for fec phy
From: Shawn Guo <hidden>
Date: 2012-06-26 08:45:07
Also in:
netdev
Subsystem:
networking drivers, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
If bootloader or platform initialization code does not enable the power supply to fec phy, we need to do it in fec driver before calling fec_reset_phy to have the phy powered on. Signed-off-by: Shawn Guo <redacted> --- drivers/net/ethernet/freescale/fec.c | 13 +++++++++++++ 1 files changed, 13 insertions(+), 0 deletions(-)
diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c
index e868a37..4dce9e3 100644
--- a/drivers/net/ethernet/freescale/fec.c
+++ b/drivers/net/ethernet/freescale/fec.c@@ -49,6 +49,7 @@ #include <linux/of_gpio.h> #include <linux/of_net.h> #include <linux/pinctrl/consumer.h> +#include <linux/regulator/consumer.h> #include <asm/cacheflush.h>
@@ -1546,6 +1547,7 @@ fec_probe(struct platform_device *pdev) const struct of_device_id *of_id; static int dev_id; struct pinctrl *pinctrl; + struct regulator *reg_phy; of_id = of_match_device(fec_dt_ids, &pdev->dev); if (of_id)
@@ -1632,6 +1634,16 @@ fec_probe(struct platform_device *pdev) clk_prepare_enable(fep->clk_ahb); clk_prepare_enable(fep->clk_ipg); + reg_phy = devm_regulator_get(&pdev->dev, "phy"); + if (!IS_ERR(reg_phy)) { + ret = regulator_enable(reg_phy); + if (ret) { + dev_err(&pdev->dev, + "Failed to enable phy regulator: %d\n", ret); + goto failed_regulator; + } + } + fec_reset_phy(pdev); ret = fec_enet_init(ndev);
@@ -1655,6 +1667,7 @@ failed_register: fec_enet_mii_remove(fep); failed_mii_init: failed_init: +failed_regulator: clk_disable_unprepare(fep->clk_ahb); clk_disable_unprepare(fep->clk_ipg); failed_pin:
--
1.7.5.4