[PATCH v5 00/14] GPMC driver conversion

Hi Tony,

On Wed, Jun 13, 2012 at 18:03:05, Tony Lindgren wrote:

Cool, yeah looks like the old interface almost works. I had to undo the
new additions for tusb6010 DMA to work as below. Then Jon has some good
comments. I also made few comments to the GPMC using driver changes.

Thanks and sorry for the trouble it caused you

I will post next version based on the comments

In general, please keep in mind that eventually we want this to be
a regular device driver that also works as a loadable module.

Yes, that is my intention, at the end of driver conversion, it should
be able to work as a module.

And we need the device tree bindings for GPMC so we can start dropping
board-*.c files as the GPMC seems to be last remaining blocker for
making rarely used legacy boards DT only. So it might be worth
playing with that so we don't again have to redo some parts.

We would prefer to do it one step at a time, have driver conversion changes
first in, and then work on DT migration. Once these changes are in we have a
base to work on for further DT migration.

Please let me know your opinion

Regards
Afzal