[PATCH v2] usb: fsl_udc: errata - postpone freeing current dTD

Hi,

On Mon, 2012-05-21 at 22:04 +0300, Felipe Balbi wrote:

quoted

On Mon, May 21, 2012 at 08:57:22AM +0200, Christoph Fritz wrote:

quoted

USB controller may access a wrong address for the dTD (endpoint transfer
descriptor) and then hang. This happens a lot when doing tests with
g_ether module and iperf, a tool for measuring maximum TCP and UDP
bandwidth.

This hardware bug is explained in detail by errata number 2858 for i.MX23:
http://cache.freescale.com/files/dsp/doc/errata/IMX23CE.pdf

All (?) SOCs with an IP from chipidea suffer from this problem.
mv_udc_core fixes this bug by commit daec765.  There still may be
unfixed drivers.

Signed-off-by: Christoph Fritz <redacted>
Signed-off-by: Christian Hemp <redacted>
---
 drivers/usb/gadget/fsl_udc_core.c |   15 ++++++++++++++-
 1 files changed, 14 insertions(+), 1 deletions(-)

diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index 55abfb6..72f2139 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c

@@ -65,6 +65,8 @@ static struct usb_sys_interface *usb_sys_regs;
 /* it is initialized in probe()  */
 static struct fsl_udc *udc_controller = NULL;
 
+static struct ep_td_struct *last_free_td;

I don't want to see global variables anymore. In fact, please convert
this to the new udc_start()/udc_stop() calls and use the generic
map/unmap routines.

That'll help you get rid of a bunch of useless code on the driver. After
that you should remove all <asm/*> header includes and drop the ARCH
dependency.

You can also drop the big-/little-endian helpers as you can make use of
generic writel()/readl() routines.

Please make sure these series comes in with enough time to reach v3.6
merge window in about 3 months.

You can put this fix together on that series after you drop the global.

Before I came to do the proposed changes, I stumbled upon this:

In file included from drivers/usb/gadget/fsl_udc_core.c:49:
drivers/usb/gadget/fsl_usb2_udc.h: In function ?get_qh_by_ep?:
drivers/usb/gadget/fsl_usb2_udc.h:585: error: ?struct fsl_ep? has no member named ?desc?
drivers/usb/gadget/fsl_udc_core.c: In function ?done?:
drivers/usb/gadget/fsl_udc_core.c:187: error: ?struct fsl_ep? has no member named ?desc?
drivers/usb/gadget/fsl_udc_core.c:187: error: ?struct fsl_ep? has no member named ?desc?
<snip>

my proposed regression patch:
---
From: Christoph Fritz <redacted>
Date: Mon, 4 Jun 2012 12:58:21 +0200
Subject: [PATCH] usb: gadget: regression fix - useage of usb_ep

This patch removes redundant pointer to struct usb_endpoint_descriptor which
were missed in commit 79149b8:

 usb: gadget: Update fsl_udc_core to use usb_endpoint_descriptor inside the
 struct usb_ep

Signed-off-by: Christoph Fritz <redacted>
---
 drivers/usb/gadget/fsl_udc_core.c |    2 +-
 drivers/usb/gadget/fsl_usb2_udc.h |    4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index 2831685..678ec4d 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c

@@ -2575,7 +2575,7 @@ static int __init fsl_udc_probe(struct platform_device *pdev)
 	/* for ep0: the desc defined here;
 	 * for other eps, gadget layer called ep_enable with defined desc
 	 */
-	udc_controller->eps[0].desc = &fsl_ep0_desc;
+	udc_controller->eps[0].ep.desc = &fsl_ep0_desc;
 	udc_controller->eps[0].ep.maxpacket = USB_MAX_CTRL_PAYLOAD;
 
 	/* setup the udc->eps[] for non-control endpoints and link

diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h
index 5cd7b7e..f61a967 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.h
+++ b/drivers/usb/gadget/fsl_usb2_udc.h

@@ -568,10 +568,10 @@ static void dump_msg(const char *label, const u8 * buf, unsigned int length)
 /*
  * ### internal used help routines.
  */
-#define ep_index(EP)		((EP)->desc->bEndpointAddress&0xF)
+#define ep_index(EP)		((EP)->ep.desc->bEndpointAddress&0xF)
 #define ep_maxpacket(EP)	((EP)->ep.maxpacket)
 #define ep_is_in(EP)	( (ep_index(EP) == 0) ? (EP->udc->ep0_dir == \
-			USB_DIR_IN ):((EP)->desc->bEndpointAddress \
+			USB_DIR_IN) : ((EP)->ep.desc->bEndpointAddress \
 			& USB_DIR_IN)==USB_DIR_IN)
 #define get_ep_by_pipe(udc, pipe)	((pipe == 1)? &udc->eps[0]: \
 					&udc->eps[pipe])

-- 
1.7.2.5