[PATCH v2 4/5] net: fec: phy-reset-gpios is optional
From: Shawn Guo <hidden>
Date: 2012-06-27 13:45:23
Also in:
linux-devicetree, netdev
Subsystem:
networking drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
The phy-reset-gpios is an optional property for fec device tree boot. Change the binding document to match the driver code. Signed-off-by: Shawn Guo <redacted> --- Documentation/devicetree/bindings/net/fsl-fec.txt | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt
index 7ab9e1a..0428920 100644
--- a/Documentation/devicetree/bindings/net/fsl-fec.txt
+++ b/Documentation/devicetree/bindings/net/fsl-fec.txt@@ -7,10 +7,10 @@ Required properties: - phy-mode : String, operation mode of the PHY interface. Supported values are: "mii", "gmii", "sgmii", "tbi", "rmii", "rgmii", "rgmii-id", "rgmii-rxid", "rgmii-txid", "rtbi", "smii". -- phy-reset-gpios : Should specify the gpio for phy reset Optional properties: - local-mac-address : 6 bytes, mac address +- phy-reset-gpios : Should specify the gpio for phy reset Example:
--
1.7.5.4