Thread (1 message) 1 message, 1 author, 2012-06-03

[PATCH 1/3] spi-orion: add device tree binding

From: Michael Walle <hidden>
Date: 2012-06-03 21:48:49
Also in: linux-devicetree

Hi Jason,

Am Sonntag 03 Juni 2012, 23:01:23 schrieb Jason Cooper:
On Sun, Jun 03, 2012 at 10:17:56PM +0200, Michael Walle wrote:
quoted
Signed-off-by: Michael Walle <redacted>
---

 .../devicetree/bindings/spi/spi-orion.txt          |    5 +++++
 drivers/spi/spi-orion.c                            |   11 +++++++++++
 2 files changed, 16 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/spi/spi-orion.txt
diff --git a/Documentation/devicetree/bindings/spi/spi-orion.txt
b/Documentation/devicetree/bindings/spi/spi-orion.txt new file mode
100644
index 0000000..e68597a
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-orion.txt
@@ -0,0 +1,5 @@
+Marvell Orion SPI device
+
+Required properties:
+- compatible : should be "marvell,orion-spi".
The above is correct, and a change in policy from when dreamplug DT
support was first added.
quoted
+- reg : offset and length of the register set for the device
diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c
index 2760450..2de58bb 100644
--- a/drivers/spi/spi-orion.c
+++ b/drivers/spi/spi-orion.c
@@ -17,6 +17,7 @@

 #include <linux/io.h>
 #include <linux/spi/spi.h>
 #include <linux/module.h>

+#include <linux/of.h>

 #include <linux/clk.h>
 #include <asm/unaligned.h>
@@ -506,6 +507,7 @@ static int __init orion_spi_probe(struct
platform_device *pdev)

 	if (orion_spi_reset(spi) < 0)
 	
 		goto out_rel_mem;

+	master->dev.of_node = pdev->dev.of_node;

 	status = spi_register_master(master);
 	if (status < 0)
 	
 		goto out_rel_mem;
@@ -547,10 +549,19 @@ static int __exit orion_spi_remove(struct
platform_device *pdev)

 MODULE_ALIAS("platform:" DRIVER_NAME);

+#ifdef CONFIG_OF
+static const struct of_device_id orion_spi_of_match_table[]
__devinitdata = { +	{ .compatible = "mrvl,orion-spi", },
Please make this consistent with the documentation, "marvell,orion-spi",
thanks.  That'll be one less to convert over later.
oh, actually i forgot to change the documentation. wasnt the convention to use 
the name used in the stock exchange?

eg. the nand driver uses mrvl,orion-nand, or kirkwood itself is named 
"mrvl,kirkwood".

Or did i miss sth, because you wrote "one less to convert over later"?

-- 
michael
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help