Tero Kristo [off-list ref] writes:
On Wed, 2012-05-16 at 16:07 -0700, Kevin Hilman wrote:
quoted
On 05/16/2012 04:05 PM, Kevin Hilman wrote:
quoted
Tero Kristo[off-list ref] writes:
quoted
From: Santosh Shilimkar<redacted>
The ROM BUG is when MPU Domain OFF wake up sequence that can compromise
IVA and Tesla execution.
At wakeup from MPU OFF on HS device only (not GP device), when
restoring the Secure RAM, the ROM Code reconfigures the clocks the
same way it is done at Cold Reset.
Ouch.
quoted
The IVAHD Clocks and Power Domain settings are:
IVAHD_CM2 IVAHD_CLKCTRL_MODULE_MODE = DISABLE
IVAHD_CM2 SL2_CLKCTRL_MODULE_MODE = DISABLE
IVAHD_CM2 SL2_CLKSTCTRL_CLKTRCTRL = HW_AUTO
IVAHD_PRM IVAHD_PWRSTCTRL_POWERSTATE = OFF
The TESLA Clocks and Power Domain settings are:
TESLA_CM1 TESLA_CLKCTRL_MODULE_MODE = DISABLE
TESLA_CM1 TESLA_CLKSTCTRL_CLKTRCTRL = HW_AUTO
TESLA_PRM TESLA_PWRSTCTRL_POWERSTATE = OFF
This patch fixes the low power OFF mode code so that the these
registers are saved and restore across MPU OFF state.
Also because of this limitation, MPU OFF alone is not targeted without
device OFF to avoid IVAHD and TESLA execution impact
I don't see where this restriction is implemented.
And, can this be hooked into cluster PM notifiers.
Especially since this only effects a subset of revisions, installing the
notifier only on effected revisions also removes any overhead on working
revisions.
Where would you recommend adding the notifiers to? Just to the same file
or...? pm44xx.c?
Same file should be ok.
Kevin