[PATCH 2/3] ARM: tegra: remove CONFIG_MACH_TEGRA_DT
From: Stephen Warren <hidden>
Date: 2012-05-21 21:44:49
Also in:
linux-tegra
Subsystem:
arm port, the rest · Maintainers:
Russell King, Linus Torvalds
From: Stephen Warren <redacted> * Make ARCH_TEGRA select USE_OF; DT is the way forward. * Build board-dt-tegra*.c when the relevant Tegra SoC support is enabled, rather than requiring a specific config option for this. * The board-specific config options already build board-*-pinmux.o, and when booting from device tree these files are no longer needed, so we can remove some Makefile commands related to those files. Signed-off-by: Stephen Warren <redacted> --- arch/arm/Kconfig | 1 + arch/arm/mach-tegra/Kconfig | 7 ------- arch/arm/mach-tegra/Makefile | 10 +++------- 3 files changed, 4 insertions(+), 14 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 8a045ec..dd17f34 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig@@ -658,6 +658,7 @@ config ARCH_TEGRA select MIGHT_HAVE_CACHE_L2X0 select NEED_MACH_IO_H if PCI select ARCH_HAS_CPUFREQ + select USE_OF help This enables support for NVIDIA Tegra based systems (Tegra APX, Tegra 6xx and Tegra 2 series).
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index 5b9b116..621466a 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig@@ -87,13 +87,6 @@ config MACH_SEABOARD also be included for some of the derivative boards that have large similarities with the seaboard design. -config MACH_TEGRA_DT - bool "Generic Tegra20 board (FDT support)" - depends on ARCH_TEGRA_2x_SOC - select USE_OF - help - Support for generic NVIDIA Tegra20 boards using Flattened Device Tree - config MACH_TRIMSLICE bool "TrimSlice board" depends on ARCH_TEGRA_2x_SOC
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index 2eb4445..60a0213 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile@@ -13,7 +13,6 @@ obj-$(CONFIG_CPU_IDLE) += sleep.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += powergate.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_clocks.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_emc.o -obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += board-dt-tegra30.o obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_clocks.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_SMP) += reset.o
@@ -23,6 +22,9 @@ obj-$(CONFIG_CPU_FREQ) += cpu-tegra.o obj-$(CONFIG_TEGRA_PCI) += pcie.o obj-$(CONFIG_USB_SUPPORT) += usb_phy.o +obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += board-dt-tegra20.o +obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += board-dt-tegra30.o + obj-$(CONFIG_MACH_HARMONY) += board-harmony.o obj-$(CONFIG_MACH_HARMONY) += board-harmony-pinmux.o obj-$(CONFIG_MACH_HARMONY) += board-harmony-pcie.o
@@ -34,11 +36,5 @@ obj-$(CONFIG_MACH_PAZ00) += board-paz00-pinmux.o obj-$(CONFIG_MACH_SEABOARD) += board-seaboard.o obj-$(CONFIG_MACH_SEABOARD) += board-seaboard-pinmux.o -obj-$(CONFIG_MACH_TEGRA_DT) += board-dt-tegra20.o -obj-$(CONFIG_MACH_TEGRA_DT) += board-harmony-pinmux.o -obj-$(CONFIG_MACH_TEGRA_DT) += board-seaboard-pinmux.o -obj-$(CONFIG_MACH_TEGRA_DT) += board-paz00-pinmux.o -obj-$(CONFIG_MACH_TEGRA_DT) += board-trimslice-pinmux.o - obj-$(CONFIG_MACH_TRIMSLICE) += board-trimslice.o obj-$(CONFIG_MACH_TRIMSLICE) += board-trimslice-pinmux.o
--
1.7.0.4