Thread (14 messages) 14 messages, 3 authors, 2012-05-07

[alsa-devel] [PATCH RESEND 0/9] Enable pinctrl support for mach-mxs

From: Dong Aisheng <hidden>
Date: 2012-05-07 07:14:00
Also in: alsa-devel, linux-fbdev, linux-i2c, linux-mmc, linux-serial

On Mon, May 07, 2012 at 09:16:05AM +0800, Shawn Guo wrote:
[Resend to have subsystem lists Cc-ed]

With pinctrl-mxs driver (DT only) applied on pinctrl tree, the mxs
device tree conversion can start basing on that support.  This series
adopts pinctrl support for mxs device drivers with a dummy pinctrl
state provided for non-DT boot, so that the pinctrl call in the device
drivers will be bypassed for non-DT probe while it starts working for
DT probe.

To ease the merge process, I would like to ask Arnd and Olof to pull
pinctrl tree as a dependency in arm-soc and have this series go through
arm-soc.
As IMX, basically i'd prefer to add pinctrl states in dts file at the
same time within the patch or using a separate patch to add them before
this series to avoid breaking the exist platforms.

However i noted that for mxs, most drivers here are still not dt capable,
so it may be ok to not add their pinctrl state at this time.

But for the patch "serial: amba-pl011: adopt pinctrl support" since it is
dt capable, so with this patch applied, the mx28 dt boot will fail.
Maybe we should at least add pinctrl states for amba-pl011 first.
Regards,
Shawn

Shawn Guo (9):
  ARM: mxs: enable pinctrl dummy states
  serial: amba-pl011: adopt pinctrl support
BTW, will this one break other platforms using this driver?
  serial: mxs-auart: adopt pinctrl support
  mmc: mxs-mmc: adopt pinctrl support
  mtd: nand: gpmi: adopt pinctrl support
  i2c: mxs: adopt pinctrl support
  ASoC: mxs-saif: adopt pinctrl support
  video: mxsfb: adopt pinctrl support
  ARM: mxs: enable pinctrl support

 arch/arm/Kconfig                        |    1 +
 arch/arm/mach-mxs/Kconfig               |    2 ++
 arch/arm/mach-mxs/include/mach/common.h |    2 ++
 arch/arm/mach-mxs/mach-apx4devkit.c     |    2 ++
 arch/arm/mach-mxs/mach-m28evk.c         |    2 ++
 arch/arm/mach-mxs/mach-mx23evk.c        |    2 ++
 arch/arm/mach-mxs/mach-mx28evk.c        |    2 ++
 arch/arm/mach-mxs/mach-stmp378x_devb.c  |    2 ++
 arch/arm/mach-mxs/mach-tx28.c           |    2 ++
 arch/arm/mach-mxs/mm.c                  |   11 +++++++++++
 drivers/i2c/busses/i2c-mxs.c            |    6 ++++++
 drivers/mmc/host/mxs-mmc.c              |    8 ++++++++
 drivers/mtd/nand/gpmi-nand/gpmi-nand.c  |    9 +++++++++
 drivers/tty/serial/amba-pl011.c         |    8 ++++++++
 drivers/tty/serial/mxs-auart.c          |    8 ++++++++
 drivers/video/mxsfb.c                   |    9 +++++++++
 sound/soc/mxs/mxs-saif.c                |    8 ++++++++
 17 files changed, 84 insertions(+), 0 deletions(-)

-- 
1.7.5.4
Regards
Dong Aisheng
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help