On Sun, Apr 29, 2012 at 1:36 AM, Russell King - ARM Linux
[off-list ref] wrote:

I don't know who's intending to take this, but I'd have thought Haojian
would have...

On Sat, Apr 28, 2012 at 11:59:49AM +0100, Paul Parsons wrote:

quoted

The asic3 driver now sets the DS1WM clock_rate from the newly added
asic3_platform_data clock_rate field.

This patch initializes the asic3_platform_data clock_rate field on the
hx4700 platform.

Signed-off-by: Paul Parsons <redacted>
Cc: Philipp Zabel <redacted>
---
?arch/arm/mach-pxa/hx4700.c | ? ?1 +
?1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 00a00a9..6bd692d 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c

@@ -295,6 +295,7 @@ static struct asic3_platform_data asic3_platform_data = {

? ? ? .gpio_config_num = ARRAY_SIZE(asic3_gpio_config),
? ? ? .irq_base ? ? ? ?= IRQ_BOARD_START,
? ? ? .gpio_base ? ? ? = HX4700_ASIC3_GPIO_BASE,
+ ? ? .clock_rate ? ? ?= 4000000,
? ? ? .leds ? ? ? ? ? ?= asic3_leds,
?};

--
1.7.3.4

Yes, I'll handle it. I required Paul to resend the patches since the
format of content is corrupted.

Paul,
Are you using copy & paste with html format to send patch? '=0A' is
CR, '=' is connecting character
between two lines. There's two much special characters, and I don't
want to handle them all.

I prefer you can use git-send-email to send patches. Or you can send
them as attachment.

Thanks
Haojian