Hi,

Am 23.02.2012 19:34, schrieb Phil Sutter:

But you might suffer from another problem, which is only present on
ARM machines with VIVT cache and linux >= 2.6.37: due to commit
f8b63c1, "ARM: 6382/1: Remove superfluous flush_kernel_dcache_page()"
which prevents pages being flushed from inside the scatterlist
iterator API. This patch seems to introduce problems in other places
(namely NFS), too but I sadly did not have time to investigate this
further. I will post a possible (cryptodev-internal) solution to
cryptodev-linux-devel at gna.org, maybe this fixes the problem with
openssl. Greetings, Phil 

since there has been no reaction on this, I would like to bring this
issue up again (I sadly don't have the expertise to investigate this
further...). The issue is not limited to cryptodev, but seems to be
either a problem with commit f8b63c1 or a problem in mv_cesa that was
uncovered by this commit. In the past, I also had massive problems
compiling on an NFS mounted file system when not reverting f8b63c1. I
currently can't reproduce this anymore under 3.4-rc5.

However, the following still happens on a 3.4-rc5 preempt kernel on arm
kirkwood (VIVT cache):

root at ww1:~# cryptsetup luksOpen /dev/sda2 c_sda2
Enter passphrase for /dev/sda2:
root at ww1:~# vgchange -a y ww1_1
  Volume group "ww1_1" not found
root at ww1:~# vgchange -a y ww1_1
Segmentation fault


Thus, the behavior of vgchange is unpredictable on a dm-crypt device
when using mv_cesa (btw. the machine needs to have no load to show this
behavior. I assume that the cache flushes caused by task switches make
it work under load).

Using the generic crypto modules, it works as expected:

root at ww1:~# cryptsetup luksClose c_sda2
root at ww1:~# rmmod mv_cesa
root at ww1:~# cryptsetup luksOpen /dev/sda2 c_sda2
Enter passphrase for /dev/sda2:
root at ww1:~# vgchange -a y ww1_1
  1 logical volume(s) in volume group "ww1_1" now active


After reverting f8b63c1, it works as expected using mv_cesa as well.


- Simon