[PATCH v2 08/12] ARM: imx6q: add usbphy clocks

On Tue, May 22, 2012 at 06:32:13AM +0200, Marek Vasut wrote:

Dear Richard Zhao,

Maybe reorder this so it's in before the PHY driver?

Patch series always driver come first.

Reviewed-by: Marek Vasut <marex@denx.de>

quoted

Signed-off-by: Richard Zhao <redacted>
---
 arch/arm/mach-imx/clk-imx6q.c |    7 ++++++-
 1 files changed, 6 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index f99509a..0d003aa 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c

@@ -152,7 +152,7 @@ enum mx6q_clks {
 	ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3,
 	usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg,
 	pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg,
-	ssi2_ipg, ssi3_ipg, clk_max
+	ssi2_ipg, ssi3_ipg, usbphy1_gate, usbphy2_gate, clk_max
 };

 static struct clk *clk[clk_max];

@@ -197,6 +197,9 @@ int __init mx6q_clocks_init(void)
 	clk[pll7_usb_host] = imx_clk_pllv3(IMX_PLLV3_USB,	

"pll7_usb_host","osc",

could you disable auto-wrap?

Thanks
Richard

quoted

base + 0x20, 0x2000,   0x3); clk[pll8_enet]     =
imx_clk_pllv3(IMX_PLLV3_ENET,	"pll8_enet",	"osc", base + 0xe0, 0x182000,
0x3);

+	clk[usbphy1_gate] = imx_clk_gate("usbphy1_gate", "pll3_usb_otg", base +
0x10, 6); +	clk[usbphy2_gate] = imx_clk_gate("usbphy2_gate",
"pll7_usb_host", base + 0x20, 6); +
 	/*                                name              parent_name       
reg       idx */ clk[pll2_pfd0_352m] = imx_clk_pfd("pll2_pfd0_352m",
"pll2_bus",     base + 0x100, 0); clk[pll2_pfd1_594m] =
imx_clk_pfd("pll2_pfd1_594m", "pll2_bus",     base + 0x100, 1); @@ -395,6
+398,8 @@ int __init mx6q_clocks_init(void)
 	clk_register_clkdev(clk[usboh3], NULL, "2184200.usb");
 	clk_register_clkdev(clk[usboh3], NULL, "2184400.usb");
 	clk_register_clkdev(clk[usboh3], NULL, "2184600.usb");
+	clk_register_clkdev(clk[usbphy1_gate], NULL, "20c9000.usbphy");
+	clk_register_clkdev(clk[usbphy2_gate], NULL, "20ca000.usbphy");
 	clk_register_clkdev(clk[uart_serial], "per", "2020000.serial");
 	clk_register_clkdev(clk[uart_ipg], "ipg", "2020000.serial");
 	clk_register_clkdev(clk[uart_serial], "per", "21e8000.serial");

Best regards,
Marek Vasut