Thread (1 message) 1 message, 1 author, 2012-04-10

[PATCH v3 6/6] mmc: sdhci-s3c: Add device tree support

From: Chris Ball <hidden>
Date: 2012-04-10 21:37:41
Also in: linux-devicetree, linux-mmc, linux-samsung-soc

Hi Arnd,

(Diff truncated to show relevant hunks.)

On Fri, Mar 30 2012, Arnd Bergmann wrote:
quoted hunk
diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
index dbd4368..90b86e5 100644
--- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
+++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
@@ -15,10 +15,10 @@ Optional properties:
 ti,dual-volt: boolean, supports dual voltage cards
 <supply-name>-supply: phandle to the regulator device tree node
 "supply-name" examples are "vmmc", "vmmc_aux" etc
-ti,bus-width: Number of data lines, default assumed is 1 if the property is missing.
+bus-width: Number of data lines, default assumed is 1 if the property is missing.
 cd-gpios: GPIOs for card detection
 wp-gpios: GPIOs for write protection
-ti,non-removable: non-removable slot (like eMMC)
+non-removable: non-removable slot (like eMMC)
 ti,needs-special-reset: Requires a special softreset sequence
 
 Example:
@@ -27,7 +27,7 @@ Example:
 		reg = <0x4809c000 0x400>;
 		ti,hwmods = "mmc1";
 		ti,dual-volt;
-		ti,bus-width = <4>;
+		bus-width = <4>;
 		vmmc-supply = <&vmmc>; /* phandle to regulator node */
 		ti,non-removable;
 	};
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 47adb16..ae48fc7 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1766,7 +1766,7 @@ static struct omap_mmc_platform_data *of_get_hsmmc_pdata(struct device *dev)
 		pdata->slots[0].nonremovable = true;
 		pdata->slots[0].no_regulator_off_init = true;
 	}
-	of_property_read_u32(np, "ti,bus-width", &bus_width);
+	of_property_read_u32(np, "bus-width", &bus_width);
 	if (bus_width == 4)
 		pdata->slots[0].caps |= MMC_CAP_4_BIT_DATA;
 	else if (bus_width == 8)
Here you change "ti,non-removable" to "non-removable" in the properties
section of ti-omap-hsmmc.txt without changing it in the example section
of that document, or in the code or shipped .dts files.

(Presumably you decided to preserve it for backwards compatibility, so
the bindings documentation shouldn't be changed.)

Thanks,

- Chris.
-- 
Chris Ball   [off-list ref]   <http://printf.net/>
One Laptop Per Child
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help