@@ -81,9 +81,7 @@ struct stmmac_priv {
 	struct stmmac_counters mmc;
 	struct dma_features dma_cap;
 	int hw_cap_support;
-#ifdef CONFIG_HAVE_CLK
 	struct clk *stmmac_clk;
-#endif
 	int clk_csr;
 };
 

@@ -103,41 +101,3 @@ int stmmac_dvr_remove(struct net_device *ndev);
 struct stmmac_priv *stmmac_dvr_probe(struct device *device,
 				     struct plat_stmmacenet_data *plat_dat,
 				     void __iomem *addr);
-
-#ifdef CONFIG_HAVE_CLK
-static inline int stmmac_clk_enable(struct stmmac_priv *priv)
-{
-	if (priv->stmmac_clk)
-		return clk_enable(priv->stmmac_clk);
-
-	return 0;
-}
-
-static inline void stmmac_clk_disable(struct stmmac_priv *priv)
-{
-	if (priv->stmmac_clk)
-		clk_disable(priv->stmmac_clk);
-}
-static inline int stmmac_clk_get(struct stmmac_priv *priv)
-{
-	priv->stmmac_clk = clk_get(priv->device, NULL);
-
-	if (IS_ERR(priv->stmmac_clk)) {
-		pr_err("%s: ERROR clk_get failed\n", __func__);
-		return PTR_ERR(priv->stmmac_clk);
-	}
-	return 0;
-}
-#else
-static inline int stmmac_clk_enable(struct stmmac_priv *priv)
-{
-	return 0;
-}
-static inline void stmmac_clk_disable(struct stmmac_priv *priv)
-{
-}
-static inline int stmmac_clk_get(struct stmmac_priv *priv)
-{
-	return 0;
-}
-#endif /* CONFIG_HAVE_CLK */

@@ -28,6 +28,7 @@
 	https://bugzilla.stlinux.com/
 *******************************************************************************/
 
+#include <linux/clk.h>
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 #include <linux/ip.h>

@@ -165,7 +166,6 @@ static void stmmac_verify_args(void)
 
 static void stmmac_clk_csr_set(struct stmmac_priv *priv)
 {
-#ifdef CONFIG_HAVE_CLK
 	u32 clk_rate;
 
 	clk_rate = clk_get_rate(priv->stmmac_clk);

@@ -189,7 +189,6 @@ static void stmmac_clk_csr_set(struct stmmac_priv *priv)
 	   * we can not estimate the proper divider as it is not known
 	   * the frequency of clk_csr_i. So we do not change the default
 	   * divider. */
-#endif
 }
 
 #if defined(STMMAC_XMIT_DEBUG) || defined(STMMAC_RX_DEBUG)

@@ -933,7 +932,8 @@ static int stmmac_open(struct net_device *dev)
 	struct stmmac_priv *priv = netdev_priv(dev);
 	int ret;
 
-	stmmac_clk_enable(priv);
+	if (!IS_ERR(priv->stmmac_clk))
+		clk_enable(priv->stmmac_clk);
 
 	stmmac_check_ether_addr(priv);
 

@@ -1068,7 +1068,9 @@ open_error:
 		phy_disconnect(priv->phydev);
 
 open_clk_dis:
-	stmmac_clk_disable(priv);
+	if (!IS_ERR(priv->stmmac_clk))
+		clk_disable(priv->stmmac_clk);
+
 	return ret;
 }
 

@@ -1121,7 +1123,9 @@ static int stmmac_release(struct net_device *dev)
 	stmmac_exit_fs();
 #endif
 	stmmac_mdio_unregister(dev);
-	stmmac_clk_disable(priv);
+
+	if (!IS_ERR(priv->stmmac_clk))
+		clk_disable(priv->stmmac_clk);
 
 	return 0;
 }

@@ -1918,8 +1922,9 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device,
 		goto error;
 	}
 
-	if (stmmac_clk_get(priv))
-		goto error;
+	priv->stmmac_clk = clk_get(priv->device, NULL);
+	if (IS_ERR(priv->stmmac_clk))
+		pr_err("%s: No clock found\n", __func__);
 
 	/* If a specific clk_csr value is passed from the platform
 	 * this means that the CSR Clock Range selection cannot be

@@ -1927,10 +1932,12 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device,
 	 * set the MDC clock dynamically according to the csr actual
 	 * clock input.
 	 */
-	if (!priv->plat->clk_csr)
-		stmmac_clk_csr_set(priv);
-	else
+	if (!priv->plat->clk_csr) {
+		if (!IS_ERR(priv->stmmac_clk))
+			stmmac_clk_csr_set(priv);
+	} else {
 		priv->clk_csr = priv->plat->clk_csr;
+	}
 
 	return priv;
 

@@ -2004,7 +2011,8 @@ int stmmac_suspend(struct net_device *ndev)
 	else {
 		stmmac_set_mac(priv->ioaddr, false);
 		/* Disable clock in case of PWM is off */
-		stmmac_clk_disable(priv);
+		if (!IS_ERR(priv->stmmac_clk))
+			clk_disable(priv->stmmac_clk);
 	}
 	spin_unlock(&priv->lock);
 	return 0;

@@ -2026,9 +2034,9 @@ int stmmac_resume(struct net_device *ndev)
 	 * from another devices (e.g. serial console). */
 	if (device_may_wakeup(priv->device))
 		priv->hw->mac->pmt(priv->ioaddr, 0);
-	else
+	else if (!IS_ERR(priv->stmmac_clk))
 		/* enable the clk prevously disabled */
-		stmmac_clk_enable(priv);
+			clk_enable(priv->stmmac_clk);
 
 	netif_device_attach(ndev);