On Tuesday 17 April 2012, Roland Stigge wrote:

+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0x20000000 0x20000000 0x30000000>;
+
+		slc: flash at 20020000 {
+			compatible = "nxp,nand-slc";
+			reg = <0x20020000 0x1000>;
+			status = "disable";
+		};
+
+		mlc: flash at 200B0000 {
+			compatible = "nxp,nand-mlc";
+			reg = <0x200B0000 0x1000>;
+			status = "disable";
+		};

You have the flash chips in here, which seem right, but I would expect
to see the phy3250 file pick this up again and define partitions in
it, at least if there is a well-defined partition layout for that
board.

+
+	chosen {
+		bootargs = "console=ttyS0,115200n81 root=/dev/ram0";
+	};

I think in general it's better not to list a command line like this,
it should instead get set by the boot loader or using ARM_ATAG_DTB_COMPAT.

	Arnd