Thread (25 messages) flat view 25 messages, 7 authors, 2012-08-07
STALE5117d

[PATCH 2/3] ARM: OMAP4: cpuidle: Use coupled cpuidle states to implement SMP cpuidle.

From: Colin Cross <hidden>
Date: 2012-03-30 19:43:29
Also in: linux-omap

On Fri, Mar 30, 2012 at 6:27 AM, Santosh Shilimkar
[off-list ref] wrote:
quoted hunk ↗ jump to hunk
OMAP4 CPUDILE driver is converted mainly based on notes from the
coupled cpuidle patch series.

The changes include :
- Register both CPUs and C-states to cpuidle driver.
- Set struct cpuidle_device.coupled_cpus
- Set struct cpuidle_device.safe_state to non coupled state.
- Set CPUIDLE_FLAG_COUPLED in struct cpuidle_state.flags for each
?state that affects multiple cpus.
- Separate ->enter hooks for coupled & simple idle.
- CPU0 wait loop for CPU1 power transition.
- CPU1 wakeup mechanism for the idle exit.
- Enabling ARCH_NEEDS_CPU_IDLE_COUPLED for OMAP4.

Thanks to Kevin Hilman and Colin Cross on the suggestions/fixes
on the intermediate version of this patch.

Signed-off-by: Santosh Shilimkar <redacted>
CC: Kevin Hilman <redacted>
Cc: Colin Cross <redacted>
---
?arch/arm/mach-omap2/Kconfig ? ? ? | ? ?1 +
?arch/arm/mach-omap2/cpuidle44xx.c | ?167 ++++++++++++++++++++++---------------
?2 files changed, 101 insertions(+), 67 deletions(-)
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index e20c8ab..250786e 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -54,6 +54,7 @@ config ARCH_OMAP4
? ? ? ?select PM_OPP if PM
? ? ? ?select USB_ARCH_HAS_EHCI
? ? ? ?select ARM_CPU_SUSPEND if PM
+ ? ? ? select ARCH_NEEDS_CPU_IDLE_COUPLED if CPU_IDLE
The "if CPU_IDLE" is not necessary, ARCH_NEEDS_CPU_IDLE_COUPLED is
designed to have no effect if CPU_IDLE is not set.
quoted hunk ↗ jump to hunk
?comment "OMAP Core Type"
? ? ? ?depends on ARCH_OMAP2
diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
index f386cbe..5724393 100644
--- a/arch/arm/mach-omap2/cpuidle44xx.c
+++ b/arch/arm/mach-omap2/cpuidle44xx.c
@@ -21,6 +21,7 @@
?#include "common.h"
?#include "pm.h"
?#include "prm.h"
+#include "clockdomain.h"

?#ifdef CONFIG_CPU_IDLE
@@ -44,10 +45,11 @@ static struct cpuidle_params cpuidle_params_table[] = {
?#define OMAP4_NUM_STATES ARRAY_SIZE(cpuidle_params_table)

?struct omap4_idle_statedata omap4_idle_data[OMAP4_NUM_STATES];
-static struct powerdomain *mpu_pd, *cpu0_pd, *cpu1_pd;
+static struct powerdomain *mpu_pd, *cpu_pd[NR_CPUS];
+static struct clockdomain *cpu_clkdm[NR_CPUS];

?/**
- * omap4_enter_idle - Programs OMAP4 to enter the specified state
+ * omap4_enter_idle_coupled_[simple/coupled] - OMAP4 cpuidle entry functions
?* @dev: cpuidle device
?* @drv: cpuidle driver
?* @index: the index of state to be entered
@@ -56,34 +58,40 @@ static struct powerdomain *mpu_pd, *cpu0_pd, *cpu1_pd;
?* specified low power state selected by the governor.
?* Returns the amount of time spent in the low power state.
?*/
-static int omap4_enter_idle(struct cpuidle_device *dev,
+static int omap4_enter_idle_simple(struct cpuidle_device *dev,
+ ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?struct cpuidle_driver *drv,
+ ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?int index)
+{
+ ? ? ? local_fiq_disable();
+ ? ? ? omap_do_wfi();
+ ? ? ? local_fiq_enable();
+
+ ? ? ? return index;
+}
+
+static int omap4_enter_idle_coupled(struct cpuidle_device *dev,
? ? ? ? ? ? ? ? ? ? ? ?struct cpuidle_driver *drv,
? ? ? ? ? ? ? ? ? ? ? ?int index)
?{
? ? ? ?struct omap4_idle_statedata *cx =
? ? ? ? ? ? ? ? ? ? ? ?cpuidle_get_statedata(&dev->states_usage[index]);
- ? ? ? u32 cpu1_state;
? ? ? ?int cpu_id = smp_processor_id();

? ? ? ?local_fiq_disable();

+ ? ? ? clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu_id);
+
? ? ? ?/*
- ? ? ? ?* CPU0 has to stay ON (i.e in C1) until CPU1 is OFF state.
+ ? ? ? ?* CPU0 has to wait and stay ON until CPU1 is OFF state.
? ? ? ? * This is necessary to honour hardware recommondation
? ? ? ? * of triggeing all the possible low power modes once CPU1 is
? ? ? ? * out of coherency and in OFF mode.
- ? ? ? ?* Update dev->last_state so that governor stats reflects right
- ? ? ? ?* data.
? ? ? ? */
- ? ? ? cpu1_state = pwrdm_read_pwrst(cpu1_pd);
- ? ? ? if (cpu1_state != PWRDM_POWER_OFF) {
- ? ? ? ? ? ? ? index = drv->safe_state_index;
- ? ? ? ? ? ? ? cx = cpuidle_get_statedata(&dev->states_usage[index]);
+ ? ? ? if (dev->cpu == 0) {
+ ? ? ? ? ? ? ? while (pwrdm_read_pwrst(cpu_pd[1]) != PWRDM_POWER_OFF)
+ ? ? ? ? ? ? ? ? ? ? ? cpu_relax();
If something goes wrong in the core coupled code or in the cpu 1 power
state transition, this will hang forever and be hard to debug.  It
might be worth adding a timeout with a BUG_ON.
quoted hunk ↗ jump to hunk
? ? ? ?}

- ? ? ? if (index > 0)
- ? ? ? ? ? ? ? clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu_id);
-
? ? ? ?/*
? ? ? ? * Call idle CPU PM enter notifier chain so that
? ? ? ? * VFP and per CPU interrupt context is saved.
@@ -91,25 +99,35 @@ static int omap4_enter_idle(struct cpuidle_device *dev,
? ? ? ?if (cx->cpu_state == PWRDM_POWER_OFF)
? ? ? ? ? ? ? ?cpu_pm_enter();
This should never get called without cpu_state == PWRDM_POWER_OFF, and
even if it did, calling cpu_pm_enter shouldn't hurt anything.  It
would be clearer to unconditionally call cpu_pm_enter().
- ? ? ? pwrdm_set_logic_retst(mpu_pd, cx->mpu_logic_state);
- ? ? ? omap_set_pwrdm_state(mpu_pd, cx->mpu_state);
-
- ? ? ? /*
- ? ? ? ?* Call idle CPU cluster PM enter notifier chain
- ? ? ? ?* to save GIC and wakeupgen context.
- ? ? ? ?*/
- ? ? ? if ((cx->mpu_state == PWRDM_POWER_RET) &&
- ? ? ? ? ? ? ? (cx->mpu_logic_state == PWRDM_POWER_OFF))
- ? ? ? ? ? ? ? ? ? ? ? cpu_cluster_pm_enter();
+ ? ? ? if (dev->cpu == 0) {
+ ? ? ? ? ? ? ? pwrdm_set_logic_retst(mpu_pd, cx->mpu_logic_state);
+ ? ? ? ? ? ? ? omap_set_pwrdm_state(mpu_pd, cx->mpu_state);
+
+ ? ? ? ? ? ? ? /*
+ ? ? ? ? ? ? ? ?* Call idle CPU cluster PM enter notifier chain
+ ? ? ? ? ? ? ? ?* to save GIC and wakeupgen context.
+ ? ? ? ? ? ? ? ?*/
+ ? ? ? ? ? ? ? if ((cx->mpu_state == PWRDM_POWER_RET) &&
+ ? ? ? ? ? ? ? ? ? ? ? (cx->mpu_logic_state == PWRDM_POWER_OFF))
+ ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? cpu_cluster_pm_enter();
+ ? ? ? }

? ? ? ?omap4_enter_lowpower(dev->cpu, cx->cpu_state);

+ ? ? ? if (dev->cpu == 0) {
+ ? ? ? ? ? ? ? /* Wakeup CPU1 only if it is not offlined */
+ ? ? ? ? ? ? ? if (cpumask_test_cpu(1, cpu_online_mask)) {
+ ? ? ? ? ? ? ? ? ? ? ? clkdm_wakeup(cpu_clkdm[1]);
+ ? ? ? ? ? ? ? ? ? ? ? clkdm_allow_idle(cpu_clkdm[1]);
+ ? ? ? ? ? ? ? }
+ ? ? ? }
+
? ? ? ?/*
? ? ? ? * Call idle CPU PM exit notifier chain to restore
? ? ? ? * VFP and per CPU IRQ context. Only CPU0 state is
? ? ? ? * considered since CPU1 is managed by CPU hotplug.
? ? ? ? */
This comment is no longer accurate?  cpu_pm_enter is called on cpu 1 above.
- ? ? ? if (pwrdm_read_prev_pwrst(cpu0_pd) == PWRDM_POWER_OFF)
+ ? ? ? if (pwrdm_read_prev_pwrst(cpu_pd[dev->cpu]) == PWRDM_POWER_OFF)
? ? ? ? ? ? ? ?cpu_pm_exit();
This should get called unconditionally.  It's not explicitly stated,
but the cpu_pm_* api expects cpu_pm_exit() to be called after
cpu_pm_enter(), even if the low power state was not entered.
Otherwise, a cpu_pm_enter notifier that disables the hardware will not
get a chance to re-enable it.
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help