[PATCH v3 2/4] video: s3c-fb: remove 'default_win' element from platform data
From: Thomas Abraham <hidden>
Date: 2012-03-24 16:28:46
Also in:
linux-fbdev, linux-samsung-soc
Subsystem:
arm port, framebuffer layer, the rest · Maintainers:
Russell King, Helge Deller, Linus Torvalds
The decision to enable or disable the data output to the lcd panel from the controller need not be based on the value of 'default_win' element in the platform data. Instead, the data output to the panel is enabled if any of the windows are active, else data output is disabled. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jingoo Han <redacted> Signed-off-by: Thomas Abraham <redacted> --- arch/arm/plat-samsung/include/plat/fb.h | 2 -- drivers/video/s3c-fb.c | 25 +++++-------------------- 2 files changed, 5 insertions(+), 22 deletions(-)
diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h
index 39d6bd7..536002f 100644
--- a/arch/arm/plat-samsung/include/plat/fb.h
+++ b/arch/arm/plat-samsung/include/plat/fb.h@@ -62,8 +62,6 @@ struct s3c_fb_platdata { struct s3c_fb_pd_win *win[S3C_FB_MAX_WIN]; struct fb_videomode *vtiming; - u32 default_win; - u32 vidcon0; u32 vidcon1; };
diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c
index c94f40d..18c84b8 100644
--- a/drivers/video/s3c-fb.c
+++ b/drivers/video/s3c-fb.c@@ -531,7 +531,7 @@ static int s3c_fb_set_par(struct fb_info *info) /* disable the window whilst we update it */ writel(0, regs + WINCON(win_no)); - if (win_no == sfb->pdata->default_win) + if (!sfb->output_on) s3c_fb_enable(sfb, 1); /* write the buffer address */
@@ -799,6 +799,7 @@ static int s3c_fb_blank(int blank_mode, struct fb_info *info) struct s3c_fb *sfb = win->parent; unsigned int index = win->index; u32 wincon; + u32 output_on = sfb->output_on; dev_dbg(sfb->dev, "blank mode %d\n", blank_mode);
@@ -837,34 +838,18 @@ static int s3c_fb_blank(int blank_mode, struct fb_info *info) shadow_protect_win(win, 1); writel(wincon, sfb->regs + sfb->variant.wincon + (index * 4)); - shadow_protect_win(win, 0); /* Check the enabled state to see if we need to be running the * main LCD interface, as if there are no active windows then * it is highly likely that we also do not need to output * anything. */ - - /* We could do something like the following code, but the current - * system of using framebuffer events means that we cannot make - * the distinction between just window 0 being inactive and all - * the windows being down. - * - * s3c_fb_enable(sfb, sfb->enabled ? 1 : 0); - */ - - /* we're stuck with this until we can do something about overriding - * the power control using the blanking event for a single fb. - */ - if (index == sfb->pdata->default_win) { - shadow_protect_win(win, 1); - s3c_fb_enable(sfb, blank_mode != FB_BLANK_POWERDOWN ? 1 : 0); - shadow_protect_win(win, 0); - } + s3c_fb_enable(sfb, sfb->enabled ? 1 : 0); + shadow_protect_win(win, 0); pm_runtime_put_sync(sfb->dev); - return 0; + return output_on == sfb->output_on; } /**
--
1.6.6.rc2