[PATCH 2/2] Input: omap-keypad: dynamically handle register offsets
From: Felipe Balbi <hidden>
Date: 2012-03-19 08:33:39
Also in:
linux-input, linux-omap
Hi, On Mon, Mar 19, 2012 at 01:27:50PM +0530, Poddar, Sourav wrote:
On Sat, Mar 17, 2012 at 11:17 AM, Dmitry Torokhov [off-list ref]
wrote:
Hi Sourav,
On Fri, Mar 16, 2012 at 07:56:29PM +0530, Sourav Poddar wrote:
> From: G, Manjunath Kondaiah [off-list ref]
>
> Keypad controller register offsets are different for omap4
> and omap5. Handle these offsets through static mapping and
> assign these mappings during run time.
>
> Signed-off-by: Felipe Balbi [off-list ref]
> Signed-off-by: G, Manjunath Kondaiah [off-list ref]
> Signed-off-by: Sourav Poddar [off-list ref]
> ---
> drivers/input/keyboard/Kconfig | 6 +-
> drivers/input/keyboard/omap4-keypad.c | 122
++++++++++++++++++++++++++------
> 2 files changed, 102 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/
Kconfig
> index 1379daa..09d7d0b 100644
> --- a/drivers/input/keyboard/Kconfig
> +++ b/drivers/input/keyboard/Kconfig
> @@ -510,10 +510,10 @@ config KEYBOARD_OMAP
> To compile this driver as a module, choose M here: the
> module will be called omap-keypad.
>
> -config KEYBOARD_OMAP4
> - tristate "TI OMAP4 keypad support"
> +config KEYBOARD_OMAP4+
> + tristate "TI OMAP4+ keypad support"
> help
> - Say Y here if you want to use the OMAP4 keypad.
> + Say Y here if you want to use the OMAP4+ keypad.
>
> To compile this driver as a module, choose M here: the
> module will be called omap4-keypad.
> diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/
keyboard/omap4-keypad.c
> index e809ac0..6872495 100644
> --- a/drivers/input/keyboard/omap4-keypad.c
> +++ b/drivers/input/keyboard/omap4-keypad.c
> @@ -68,6 +68,11 @@
>
> #define OMAP4_MASK_IRQSTATUSDISABLE 0xFFFF
>
> +enum {
> + KBD_REVISION_OMAP4 = 0,
> + KBD_REVISION_OMAP5,
> +};
> +
> struct omap4_keypad {
> struct input_dev *input;
>
> @@ -76,11 +81,79 @@ struct omap4_keypad {
>
> unsigned int rows;
> unsigned int cols;
> + unsigned int revision;
> unsigned int row_shift;
> unsigned char key_state[8];
> unsigned short keymap[];
> };
>
> +static int kbd_read_irqstatus(struct omap4_keypad *keypad_data, u32
offset)
> +{
> + if (keypad_data->revision == KBD_REVISION_OMAP4)
> + return __raw_readl(keypad_data->base + offset);
> + else if (keypad_data->revision == KBD_REVISION_OMAP5)
> + return __raw_readl(keypad_data->base + offset + 0x0c);
> +
This is called from ISR and doing comparisons seems quite wasteful. Why
don't you stuff register numbers for IRQ manipulations into struct
omap4_keypad at probe time and your function would just do:
return __raw_readl(keypad_data->base + keypad_data->irqstatus_reg);
Yes, can do that way . Will make necessary changes and post it again.
And do the same for irqstatus. FOr the rest of the register store the
I think you mean "irqenable" here.
common offset (seems to be 0x10).
> + return -ENODEV;
> +}
> +
> +static int kbd_write_irqstatus(struct omap4_keypad *keypad_data,
> + u32 offset, u32 value)
> +{
> + if (keypad_data->revision == KBD_REVISION_OMAP4)
> + return __raw_writel(value, keypad_data->base + offset);
> + else if (keypad_data->revision == KBD_REVISION_OMAP5)
> + return __raw_writel(value, keypad_data->base + offset +
0x0c);
> +
> + return -ENODEV;
> +}
> +
> +static int kbd_write_irqenable(struct omap4_keypad *keypad_data,
> + u32 offset, u32 value)
> +{
> + if (keypad_data->revision == KBD_REVISION_OMAP4)
> + return __raw_writel(value, keypad_data->base + offset);
> + else if (keypad_data->revision == KBD_REVISION_OMAP5)
> + return __raw_writel(value, keypad_data->base + offset +
0x0c);
> +
> + return -ENODEV;
> +}
> +
> +static int kbd_readl(struct omap4_keypad *keypad_data, u32 offset)
> +{
> + if (keypad_data->revision == KBD_REVISION_OMAP4)
> + return __raw_readl(keypad_data->base + offset);
> + else if (keypad_data->revision == KBD_REVISION_OMAP5)
> + return __raw_readl(keypad_data->base + offset + 0x10);
> +
> + return -ENODEV;
> +}
> +
> +static void kbd_writel(struct omap4_keypad *keypad_data, u32 offset, u32
value)
> +{
> + if (keypad_data->revision == KBD_REVISION_OMAP4)
> + __raw_writel(value, keypad_data->base + offset);
> + else if (keypad_data->revision == KBD_REVISION_OMAP5)
> + __raw_writel(value, keypad_data->base + offset + 0x10);
> +}
> +
> +static int kbd_read_revision(struct omap4_keypad *keypad_data, u32
offset)
> +{
> + int reg;
> + reg = __raw_readl(keypad_data->base + offset);
> + reg &= 0x03 << 30;
> + reg >>= 30;
> +
> + switch (reg) {
> + case 1:
> + return KBD_REVISION_OMAP5;
> + case 0:
> + return KBD_REVISION_OMAP4;
> + default:
> + return -ENODEV;
> + }
> +}
> +
> /* Interrupt handler */
> static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id)
> {
> @@ -91,12 +164,11 @@ static irqreturn_t omap4_keypad_interrupt(int irq,
void *dev_id)
> u32 *new_state = (u32 *) key_state;
>
> /* Disable interrupts */
> - __raw_writel(OMAP4_VAL_IRQDISABLE,
> - keypad_data->base + OMAP4_KBD_IRQENABLE);
> + kbd_write_irqenable(keypad_data, OMAP4_KBD_IRQENABLE,
> + OMAP4_VAL_IRQDISABLE);
>
> - *new_state = __raw_readl(keypad_data->base +
OMAP4_KBD_FULLCODE31_0);
> - *(new_state + 1) = __raw_readl(keypad_data->base
> - + OMAP4_KBD_FULLCODE63_32);
> + *new_state = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE31_0);
> + *(new_state + 1) = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE63_32);
>
> for (row = 0; row < keypad_data->rows; row++) {
> changed = key_state[row] ^ keypad_data->key_state[row];
> @@ -121,12 +193,13 @@ static irqreturn_t omap4_keypad_interrupt(int irq,
void *dev_id)
> sizeof(keypad_data->key_state));
>
> /* clear pending interrupts */
> - __raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS),
> - keypad_data->base + OMAP4_KBD_IRQSTATUS);
> + kbd_write_irqstatus(keypad_data, OMAP4_KBD_IRQSTATUS,
> + kbd_read_irqstatus(keypad_data,
OMAP4_KBD_IRQSTATUS));
>
> /* enable interrupts */
> - __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN |
OMAP4_DEF_IRQENABLE_LONGKEY,
> - keypad_data->base + OMAP4_KBD_IRQENABLE);
> + kbd_write_irqenable(keypad_data, OMAP4_KBD_IRQENABLE,
> + OMAP4_DEF_IRQENABLE_EVENTEN |
> + OMAP4_DEF_IRQENABLE_LONGKEY);
>
> return IRQ_HANDLED;
> }
> @@ -139,16 +212,19 @@ static int omap4_keypad_open(struct input_dev
*input)
>
> disable_irq(keypad_data->irq);
>
> - __raw_writel(OMAP4_VAL_FUNCTIONALCFG,
> - keypad_data->base + OMAP4_KBD_CTRL);
> - __raw_writel(OMAP4_VAL_DEBOUNCINGTIME,
> - keypad_data->base + OMAP4_KBD_DEBOUNCINGTIME);
> - __raw_writel(OMAP4_VAL_IRQDISABLE,
> - keypad_data->base + OMAP4_KBD_IRQSTATUS);
> - __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN |
OMAP4_DEF_IRQENABLE_LONGKEY,
> - keypad_data->base + OMAP4_KBD_IRQENABLE);
> - __raw_writel(OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA,
> - keypad_data->base + OMAP4_KBD_WAKEUPENABLE);
> + keypad_data->revision = kbd_read_revision(keypad_data,
> + OMAP4_KBD_REVISION);
You want to bail out of kbd_read_revision() returns error here.
Yes, will include a error check.Please send text/plain emails. You're currently sending multipart: Content-Type: multipart/alternative; -- balbi -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120319/8fe3b937/attachment-0001.sig>