[PATCHv2 09/13] I2C: OMAP: Correct I2C revision for OMAP3
From: Shubhrajyoti D <hidden>
Date: 2012-03-08 13:18:01
Also in:
linux-i2c, linux-omap
Subsystem:
i2c subsystem, i2c subsystem host drivers, omap i2c driver, omap1 support, omap2+ support, the rest · Maintainers:
Andi Shyti, Vignesh R, Aaro Koskinen, Janusz Krzysztofik, Andreas Kemnade, Kevin Hilman, Roger Quadros, Tony Lindgren, Linus Torvalds
From: Jon Hunter <redacted> The OMAP3530 is based upon the same silicon as the OMAP3430 and so the I2C revision is the same for 3430 and 3530. However, the OMAP3630 device has the same I2C revision as OMAP4. Correct the revision definition to reflect this. This patch is based on work done by Jon Hunter [off-list ref] Changes from his patch - Update OMAP_I2C_REV_ON_3430 also to reflect that it is same as 3530 Signed-off-by: Jon Hunter <redacted> Signed-off-by: Shubhrajyoti D <redacted> --- drivers/i2c/busses/i2c-omap.c | 10 +++++----- 1 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index e12144e..ed22e67 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c@@ -50,8 +50,8 @@ /* I2C controller revisions present on specific hardware */ #define OMAP_I2C_REV_ON_2430 0x36 -#define OMAP_I2C_REV_ON_3430 0x3C -#define OMAP_I2C_REV_ON_3530_4430 0x40 +#define OMAP_I2C_REV_ON_3430_3530 0x3C +#define OMAP_I2C_REV_ON_3630_4430 0x40 /* timeout waiting for the controller to respond */ #define OMAP_I2C_TIMEOUT (msecs_to_jiffies(1000))
@@ -298,7 +298,7 @@ static int omap_i2c_reset(struct omap_i2c_dev *dev) omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, SYSC_AUTOIDLE_MASK); - } else if (dev->rev >= OMAP_I2C_REV_ON_3430) { + } else if (dev->rev >= OMAP_I2C_REV_ON_3430_3530) { dev->syscstate = SYSC_AUTOIDLE_MASK; dev->syscstate |= SYSC_ENAWAKEUP_MASK; dev->syscstate |= (SYSC_IDLEMODE_SMART <<
@@ -1051,7 +1051,7 @@ omap_i2c_probe(struct platform_device *pdev) dev->rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) & 0xff; - if (dev->rev <= OMAP_I2C_REV_ON_3430) + if (dev->rev <= OMAP_I2C_REV_ON_3430_3530) dev->errata |= I2C_OMAP3_1P153; if (!(dev->flags & OMAP_I2C_FLAG_NO_FIFO)) {
@@ -1069,7 +1069,7 @@ omap_i2c_probe(struct platform_device *pdev) dev->fifo_size = (dev->fifo_size / 2); - if (dev->rev >= OMAP_I2C_REV_ON_3530_4430) + if (dev->rev >= OMAP_I2C_REV_ON_3630_4430) dev->b_hw = 0; /* Disable hardware fixes */ else dev->b_hw = 1; /* Enable hardware fixes */
--
1.7.1