[PATCH 1/2] ARM: kirkwood: Basic support for DNS-320 and DNS-325

On Mon, Mar 12, 2012 at 08:11:22AM +0000, Arnd Bergmann wrote:

On Monday 12 March 2012, Jason Cooper wrote:

quoted

quoted

Or even use the ranges property to remap everything into
a simpler address range:

      ocp at f1000000 {
              compatible = "simple-bus";
              ranges = <0 0xf1000000 0x1000000>;
              #address-cells = 1;
              #size-cells = 1;

              serial at 12000 {
                      reg = <0x12000 0x100>;
                      ...
              };

              ...
      };

Okay, that's pretty slick.  The wdt and intc are at 0xfed00000, is that
another ocp bus?  Or, am I missing something?

If they are on those addresses, yes. If you have a data sheet, you should
look at what the buses are named there, "ocp" was just an example and I
took that name from the <mach/kirkwood.h> file.

It does seem though that the 0xfed00000 address is where Linux maps
the same 0xf1000000 range in its own virtual address space, so it's
not something that should appear in the device tree.

Okay, that's what smelled funny.  wdt and intc both only have registers
in virtual address space defined.  Can I assume they map like everything
else to corresponding physical addresses?

eg wdt at fed20300 -> wdt at f1020300 ?

thx,

Jason.