Thread (6 messages) flat view 6 messages, 2 authors, 2012-03-01

[PATCH v2 2/2] dmaengine: Add support for multiple descriptors for imx-dma.

From: s.hauer@pengutronix.de (Sascha Hauer)
Date: 2012-03-01 18:19:00
Also in: lkml

On Thu, Mar 01, 2012 at 11:28:18AM +0100, javier Martin wrote:
Hi Sascha,

On 1 March 2012 11:19, Sascha Hauer [off-list ref] wrote:
quoted
On Tue, Feb 28, 2012 at 05:08:18PM +0100, Javier Martin wrote:
quoted
dmaengine specifies the possibility that several descriptors
can be queued for transfer. It also indicates that tasklets
must be used for DMA callbacks.

Signed-off-by: Javier Martin <redacted>
Have you tested this patch with audio?
Yes,
I have a test battery which tests audio, mmc, runs dmatest module and
a custom mem2mem video device I'm developing.
Cool.
quoted
quoted
+static int imxdma_xfer_desc(struct imxdma_desc *d)
+{
+ ? ? struct imxdma_channel *imxdmac = to_imxdma_chan(d->desc.chan);
+ ? ? int ret;
+
+ ? ? /* Configure and enable */
+ ? ? switch (d->type) {
+ ? ? case IMXDMA_DESC_MEMCPY:
+ ? ? ? ? ? ? ret = imx_dma_config_channel(imxdmac->imxdma_channel,
+ ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? d->config_port, d->config_mem, 0, 0);
+ ? ? ? ? ? ? if (ret < 0)
+ ? ? ? ? ? ? ? ? ? ? return ret;
+ ? ? ? ? ? ? ret = imx_dma_setup_single(imxdmac->imxdma_channel, d->src,
+ ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?d->len, d->dest, d->dmamode);
+ ? ? ? ? ? ? if (ret < 0)
+ ? ? ? ? ? ? ? ? ? ? return ret;
+ ? ? ? ? ? ? break;
+ ? ? case IMXDMA_DESC_CYCLIC:
+ ? ? ? ? ? ? ret = imx_dma_setup_progression_handler(imxdmac->imxdma_channel,
+ ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? imxdma_progression);
+ ? ? ? ? ? ? if (ret < 0)
+ ? ? ? ? ? ? ? ? ? ? return ret;
You fall through here. Is this intended? If yes, a comment would be good
here.
Yes it is. cyclic is the same as slave_sg with the add-on of the
progression handler and a specific configuration of the sglist which
is done in 'imxdma_prep_dma_cyclic'.
Do you want me to send a new version with a comment on the matter?
Yes, it's better to have a comment there. People looking at this code
will ask themselves the same question otherwise.

With this you can add my:

Acked-by: Sascha Hauer <s.hauer@pengutronix.de>

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help