[PATCH v2 3/5] arm/dts: OMAP4: Add SPI controller nodes
From: Benoit Cousson <hidden>
Date: 2012-02-28 22:19:08
Also in:
linux-omap
Subsystem:
arm port, omap2+ support, the rest · Maintainers:
Russell King, Aaro Koskinen, Andreas Kemnade, Kevin Hilman, Roger Quadros, Tony Lindgren, Linus Torvalds
Add the 4 McSPI controller nodes present in an OMAP4 device. Remove SPI static device initialisation if DT is populated. Signed-off-by: Benoit Cousson <redacted> Cc: Grant Likely <redacted> Acked-by: Rob Herring <redacted> --- arch/arm/boot/dts/omap4.dtsi | 32 ++++++++++++++++++++++++++++++++ arch/arm/mach-omap2/devices.c | 4 +++- 2 files changed, 35 insertions(+), 1 deletions(-)
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index e8fe75f..82830f5 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi@@ -127,5 +127,37 @@ ti,hwmods = "uart4"; clock-frequency = <48000000>; }; + + mcspi1: spi at 48098000 { + compatible = "ti,omap4-mcspi"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi1"; + ti,spi-num-cs = <4>; + }; + + mcspi2: spi at 4809a000 { + compatible = "ti,omap4-mcspi"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi2"; + ti,spi-num-cs = <2>; + }; + + mcspi3: spi at 480b8000 { + compatible = "ti,omap4-mcspi"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi3"; + ti,spi-num-cs = <2>; + }; + + mcspi4: spi at 480ba000 { + compatible = "ti,omap4-mcspi"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi4"; + ti,spi-num-cs = <1>; + }; }; };
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 283d11e..8a489ba 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c@@ -725,7 +725,9 @@ static int __init omap2_init_devices(void) omap_init_dmic(); omap_init_camera(); omap_init_mbox(); - omap_init_mcspi(); + /* If dtb is there, the devices will be created dynamically */ + if (!of_have_populated_dt()) + omap_init_mcspi(); omap_init_pmu(); omap_hdq_init(); omap_init_sti();
--
1.7.0.4