* Tomi Valkeinen [off-list ref] [120221 23:38]:

Hi,

On Tue, 2012-02-21 at 15:40 -0800, Tony Lindgren wrote:

quoted

Otherwise we cannot move most of plat/io.h to be a local
iomap.h for mach-omap2.

Cc: Tomi Valkeinen <redacted>
Cc: linux-fbdev at vger.kernel.org
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/display.c   |    3 +++
 drivers/video/omap2/dss/dispc.c |    5 -----
 2 files changed, 3 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 3677b1f..5a7f12f 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c

@@ -191,6 +191,9 @@ int __init omap_display_init(struct omap_dss_board_info *board_data)
 	memset(&pdata, 0, sizeof(pdata));
 
 	if (cpu_is_omap24xx()) {
+		/* L3 firewall setting: enable access to OCM RAM */
+		__raw_writel(0x402000b0, OMAP2_L3_IO_ADDRESS(0x680050a0));
+
 		curr_dss_hwmod = omap2_dss_hwmod_data;
 		oh_count = ARRAY_SIZE(omap2_dss_hwmod_data);
 	} else if (cpu_is_omap34xx()) {

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index e1626a1..cce0820 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c

@@ -3272,11 +3272,6 @@ static void _omap_dispc_initial_config(void)
 	if (dss_has_feature(FEAT_FUNCGATED))
 		REG_FLD_MOD(DISPC_CONFIG, 1, 9, 9);
 
-	/* L3 firewall setting: enable access to OCM RAM */
-	/* XXX this should be somewhere in plat-omap */
-	if (cpu_is_omap24xx())
-		__raw_writel(0x402000b0, OMAP2_L3_IO_ADDRESS(0x680050a0));
-
 	_dispc_setup_color_conv_coef();
 
 	dispc_set_loadmode(OMAP_DSS_LOAD_FRAME_ONLY);

I think the whole raw_writel line can be removed. It's been copied from
the old omapfb, and my understanding is that it's about using SRAM for
framebuffer. Using SRAM for fb is no longer supported, and I have a
patch set that removes the remaining SRAM code from omapfb/omapdss.

OK, I'll remove those from drivers/video/omap2/dss/dispc.c so this
series keeps building.

Tony