[PATCH 0/2 v5] arm: kirkwood: add dreamplug/devicetree support

On Sun, Feb 26, 2012 at 11:00:38AM +0000, Ian Campbell wrote:

On Thu, 2012-02-23 at 19:52 +0000, Jason Cooper wrote:

quoted

This patch series provides initial support for devicetree on kirkwood for the
dreamplug platform.  After discussing the approach with Arnd Bergman last week
at ELC, we decided to take an incremental approach to the conversion.  First, I
would detect that we were on the dreamplug via the devicetree blob.  Then,
configure uart0 via devicetree.  We chose the uart since it is already well
supported under devicetree.

This patch series has been boot-tested on the dreamplug.

Tested-by: Ian Campbell <redacted>

thanks!

I needed the following (obvious) patch against u-boot:

yes, I forgot to mention that.  By any chance, have you tested booting
non-fdt kernels from u-boot with this option enabled?  I'm fairly sure
it will work, but I haven't tested it myself.

If you can boot both fdt and non-fdt kernels with this enabled, submit
it to u-boot, CC: Prafulla, and I'll ack it.

thx,

Jason.