[PATCH v3 0/2] Device tree support for TWL regulators

Hi Rajendra,


On 02/27/2012 12:35 PM, Rajendra Nayak wrote:

Re-sending on top of Tero's changes which are already
in -next and the one which adds support for twl6030 
vdd1/2/3 SMPS [1].

Would you be able to add support for V1V8, V2V1 SMPS supplies in
twl6030? These regulators are need on SDP4430, and PandaBoards for the
twl6040 audio codec.
I have sent a series to add this support:
http://marc.info/?l=linux-omap&m=132886849202915&w=2

Thanks,
P?ter

v3 has mainly 2 differences from v2
-1- TWL driver now uses just one table for both dt and
non-dt based lookup for driver data.
-2- All common regulator nodes for twl4030 and twl6030 are
now defined in the twl4030.dtsi and twl6030.dtsi instead of
repeating the nodes in all board files, which also means
the patch ('arm/dts: twl: Pass regulator data from dt')
has a dependency with the series from Benoit which adds the
twl4030.dtsi and twl6030.dtsi files[2].

I have tested the patches on omap4panda and omap3beagle boards.

[1] http://marc.info/?l=linux-omap&m=133009693905864&w=2
[2] git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git
	for_3.4/dt_i2c_twl

Rajendra Nayak (2):
  regulator: twl: adapt twl-regulator driver to dt
  arm/dts: twl: Pass regulator data from dt

 .../bindings/regulator/twl-regulator.txt           |   66 +++++
 arch/arm/boot/dts/omap3-beagle.dts                 |    6 +
 arch/arm/boot/dts/twl4030.dtsi                     |   18 ++
 arch/arm/boot/dts/twl6030.dtsi                     |   60 +++++
 drivers/regulator/twl-regulator.c                  |  259 +++++++++++++-------
 5 files changed, 322 insertions(+), 87 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/regulator/twl-regulator.txt

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html