Thread (5 messages) 5 messages, 4 authors, 2012-03-09

[PATCH v2 3/4] arm/dts: OMAP4: Add mmc controller nodes and board data

From: T Krishnamoorthy, Balaji <hidden>
Date: 2012-02-24 10:16:44
Also in: linux-devicetree, linux-mmc, linux-omap

Possibly related (same subject, not in this thread)

quoted hunk ↗ jump to hunk
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 29f4589..9204f60 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -25,6 +25,11 @@
? ? ? ? ? ? ? ?serial1 = &uart2;
? ? ? ? ? ? ? ?serial2 = &uart3;
? ? ? ? ? ? ? ?serial3 = &uart4;
+ ? ? ? ? ? ? ? mmc1 = &mmc1;
+ ? ? ? ? ? ? ? mmc2 = &mmc2;
+ ? ? ? ? ? ? ? mmc3 = &mmc3;
+ ? ? ? ? ? ? ? mmc4 = &mmc4;
+ ? ? ? ? ? ? ? mmc5 = &mmc5;
? ? ? ?};

? ? ? ?cpus {
@@ -155,5 +160,31 @@
? ? ? ? ? ? ? ? ? ? ? ?#size-cells = <0>;
? ? ? ? ? ? ? ? ? ? ? ?ti,hwmods = "i2c4";
? ? ? ? ? ? ? ?};
+
+ ? ? ? ? ? ? ? mmc1: mmc at 1 {
+ ? ? ? ? ? ? ? ? ? ? ? compatible = "ti,omap4-hsmmc";
+ ? ? ? ? ? ? ? ? ? ? ? ti,hwmods = "mmc1";
+ ? ? ? ? ? ? ? ? ? ? ? ti,dual-volt;
+ ? ? ? ? ? ? ? };
+
+ ? ? ? ? ? ? ? mmc2: mmc at 2 {
+ ? ? ? ? ? ? ? ? ? ? ? compatible = "ti,omap4-hsmmc";
+ ? ? ? ? ? ? ? ? ? ? ? ti,hwmods = "mmc2";
+ ? ? ? ? ? ? ? };
Hi Rajendra,
Is there a way to control the device registration order,
eMMC connected to mmc2 needs to be registered as /dev/mmcblk0p ...
irrespective of whether SD card is mount or not on mmc1 card slot.
So that bootargs would not have to be modified when filesystem is on eMMC.
+
+ ? ? ? ? ? ? ? mmc3: mmc at 3 {
+ ? ? ? ? ? ? ? ? ? ? ? compatible = "ti,omap4-hsmmc";
+ ? ? ? ? ? ? ? ? ? ? ? ti,hwmods = "mmc3";
+ ? ? ? ? ? ? ? };
+
+ ? ? ? ? ? ? ? mmc4: mmc at 4 {
+ ? ? ? ? ? ? ? ? ? ? ? compatible = "ti,omap4-hsmmc";
+ ? ? ? ? ? ? ? ? ? ? ? ti,hwmods = "mmc4";
+ ? ? ? ? ? ? ? };
+
+ ? ? ? ? ? ? ? mmc5: mmc at 5 {
+ ? ? ? ? ? ? ? ? ? ? ? compatible = "ti,omap4-hsmmc";
+ ? ? ? ? ? ? ? ? ? ? ? ti,hwmods = "mmc5";
+ ? ? ? ? ? ? ? };
? ? ? ?};
?};
--
1.7.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help