[PATCH 4/4 v2] ARM: at91: sam9g45 add i2c DT support
From: Jean-Christophe PLAGNIOL-VILLARD <hidden>
Date: 2012-02-09 02:25:08
Also in:
linux-devicetree
Subsystem:
the rest · Maintainer:
Linus Torvalds
for now on use i2c-gpio driver on the same pin as the hardware IP Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <redacted> Cc: Nicolas Ferre <redacted> Cc: devicetree-discuss at lists.ozlabs.org --- v2: update DT bindings Best Regards, J. arch/arm/boot/dts/at91sam9g45.dtsi | 13 +++++++++++++ 1 files changed, 13 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index a12ebc4..9f266ee 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi@@ -211,6 +211,19 @@ status = "disabled"; }; + i2c-gpio at 0 { + compatible = "i2c-gpio"; + gpios = <&pioA 20 0 /* sda */ + &pioA 21 0 /* scl */ + >; + i2c-gpio,sda-open-drain; + i2c-gpio,scl-open-drain; + udelay = <5>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; }; };
--
1.7.7